SMV2021-203 [SKYWORKS]
Silicon Hyperabrupt Junction Varactors, Packaged and Bondable Planar Chips; 硅超突变结变容二极管,封装和可粘接平面芯片型号: | SMV2021-203 |
厂家: | SKYWORKS SOLUTIONS INC. |
描述: | Silicon Hyperabrupt Junction Varactors, Packaged and Bondable Planar Chips |
文件: | 总5页 (文件大小:477K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
data sheet
SMV2019 to SMV2023: Silicon Hyperabrupt Junction
Varactors, Packaged and Bondable Planar Chips
Applications
l
Voltage controlled oscillators
Features
l
High Q for low loss resonators
l
Low leakage current
l
High tuning ratio for wideband VCOs
l
SPICE model parameters
l
Small footprint chip design
l
Lead (Pb)-free, RoHS-compliant, and Green™
Description
Skyworks silicon hyperabrupt junction varactor diodes are pro-
cessed using established ion-implantation technology resulting
Absolute Maximum Ratings
in low R wide tuning ratio devices with high Q values. These
S
Cꢀꢁrꢁcꢂꢃriꢄꢂic
Vꢁluꢃ
22 V
diodes are available as chips or in ceramic packages. These
planar chips have a small outline size (12 x 12 mils
nominal) and are fully passivated, resulting in low leakage current
and high reliability. These varactor chips are intended for assembly
in hybrid integrated circuit resonators used in VCOs and analog
tuned filters.
Reverse Voltage (V )
R
Forward Current (I )
100 mA
F
Power Dissipation at 25 °C (P )
250 mW
D
Operating Temperature (T
)
OP
-55 °C to +150 °C
-65 °C to +200 °C
Storage Temperature (T
)
ST
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum Ratings. Exceeding
any of the absolute maximum/minimum specifications may result in permanent damage to the
device and will void the warranty.
Skyworks Green™ products are RoHS (Restriction
of Hazardous Substances)-compliant, conform to
the EIA/EICTA/JEITA Joint Industry Guide (JIG)
Level A guidelines, are halogen free according to
IEC-61249-2-21, and contain <1,000 ppm antimony
trioxide in polymeric materials.
NeW
CAUTION: Although these devices are designed to be robust, ESD
(Electrostatic Discharge) can cause permanent damage.
Static charges may easily produce potentials of several
kilovolts on the human body or equipment, which can
discharge without detection. Industry-standard ESD
precautions must be employed at all times.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200138 Rev. D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • December 18, 2008
1
Data Sheet • SMV2019–SMV2023
Electrical Specifications at 25 °C
C @ 0 V
(pF)
C @ 4 V
(pF)
C @ 20 V
Q @ 4 V
1 Ghz
@ 4 V (Ω)
I
R
@17.6 V
(na)
Conꢀꢁcꢀ
diꢁm. (milꢄ)
J
J
J
(1)
(2)
(3)
(4)
Pꢁrꢂ Numbꢃr
(pF)
50 Mhz
Min.
500
R
s
typ.
2.3
Min.
0.68
1.13
1.58
2.48
4.28
Mꢁx.
0.88
1.43
1.98
3.08
5.28
Min.
0.13
0.23
0.32
0.48
0.78
Mꢁx.
0.23
0.33
0.44
0.68
1.08
typ.
4.8
4.1
2.8
2.2
1.4
Mꢁx.
50
Nom.
2
SMV2019-000
SMV2020-000
SMV2021-000
SMV2022-000
SMV2023-000
3.1
500
50
2.5
3
4.5
500
50
7.1
400
50
3.75
5
10.8
400
50
1. All capacitance values specified at 1 MHz.
2. 50 MHz Q calculated from 1 GHz RS and 1 MHz CJ.
3. VB at 10 µA specified at 22 V Min.
4. Outline drawing 149-801.
Hermetic Packaged Varactor Diodes
sꢂriplinꢃ
hꢃrmꢃꢂic Pill
sꢂriplinꢃ
219
Coꢁxiꢁl
210
240
203
SMV2019-240
SMV2020-240
SMV2021-240
SMV2022-240
SMV2023-240
SMV2019-203
SMV2020-203
SMV2021-203
SMV2022-203
SMV2023-203
SMV2019-219
SMV2020-219
SMV2021-219
SMV2022-219
SMV2023-219
SMV2019-210
SMV2020-210
SMV2021-210
SMV2022-210
SMV2023-210
Typical Performance Data
12
11
10
9
8
6
SMV2019-000
SMV2020-000
5
4
3
2
1
0
SMV2023-000
SMV2022-000
SMV2021-000
SMV2022-000
SMV2023-000
7
SMV2021-000
6
SMV2020-000
5
SMV2019-000
4
3
2
1
0
0
5
10
15
20
0
4
8
12
16
20
Reverse Voltage (V)
Reverse Voltage (V)
Cꢁpꢁciꢂꢁncꢃ vꢄ. Rꢃvꢃrꢄꢃ Volꢂꢁgꢃ
sꢃriꢃꢄ Rꢃꢄiꢄꢂꢁncꢃ vꢄ. Volꢀꢁgꢂ @ 1 Ghz
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
December 18, 2008 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200138 Rev. D
2
Data Sheet • SMV2019–SMV2023
Typical Capacitance Values
SPICE Model
SMV2019
SMV2020
SMV2021
SMV2022
SMV2023
V
(V)
C (pF)
C (pF)
C (pF)
C (pF)
C (pF)
R
J
J
J
J
J
DIODEM
0
2.25
1.79
1.53
1.19
0.99
0.84
0.71
0.57
0.46
0.38
0.33
0.29
0.26
0.24
0.23
0.21
0.2
3.14
2.5
4.48
3.57
3.09
2.45
2.09
1.83
1.6
7.08
5.66
4.88
3.89
3.19
2.71
2.3
10.76
8.76
7.67
6.31
5.38
4.75
4.21
3.66
3.17
2.68
2.25
1.89
1.66
1.49
1.35
1.24
1.16
1.1
Diode_Model
PORT
P_anode
port = 1
I
S = 1.00e-14
0.5
1
RS = RS
N = 1, 2
2.16
1.72
1.44
1.24
1.07
0.9
TT = 0
2
C
JO = CJO
RES
RS
R = RS
M = M
3
VJ = VJ
EG = 1.11
4
X
TI = 3
DIODE
Varactor_Diode
AREA = 1
MODEL = Diode_Model
MODE = nonlinear
KF =0
5
AF =1
6
1.37
1.17
0.97
0.81
0.69
0.61
0.56
0.51
0.48
0.45
0.43
0.41
0.39
0.38
0.36
1.87
1.52
1.25
1.07
0.94
0.85
0.78
0.73
0.69
0.65
0.62
0.59
0.57
0.55
0.54
F
C = 0.5
BV = 22
7
0.74
0.61
0.52
0.46
0.42
0.38
0.36
0.34
0.32
0.31
0.29
0.28
0.27
0.26
I
I
BV = 1e-5
SR = 0
R = 2
KF = 0
BV = 1
BVL = 0
BVL = 1
8
N
I
9
PORT
P_Cathode
port = 2
N
10
11
12
13
14
15
16
17
18
19
20
I
N
TBV1 = 0
TNOM = 27
FFE = 1
CJ0
CV =
M
VR
VJ
1+
0.19
0.19
0.18
0.17
0.16
1.04
0.99
0.95
0.91
Pꢁrꢂ
Numbꢂr
C
(pF)
V
J
R
sꢀ
JO
ꢀ
(V)
3.5
3.6
3.9
4
M
(Ω)
4.8
4.1
2.8
2.2
1.4
SMV2019
SMV2020
SMV2021
SMV2022
SMV2023
2.3
1.4
1.3
3.3
4.5
1.34
1.4
149-801
7.1
Anode Metallized Gold Dot
0.002 (0.051 mm) Dia. Min.
10.8
4.6
1.45
SPICE model parameters extracted from measured characteristics may not reflect exact
physical or electronic properties. See application note APN1004.
0.010 (0.254 mm) Min.
0.014 (0.356 mm) Max. Sq.
Silicon
0.004 (0.127 mm) Min.
0.006 (0.152 mm) Max.
Cathode Metallized Back
Contact: Gold
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200138 Rev. D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • December 18, 2008
3
Data Sheet • SMV2019–SMV2023
-203
-219
Schematic
N-Type
Schematic
0.075 (1.91 mm)
0.065 (1.65 mm)
Sq.
0.050 (1.27 mm)
0.040 (1.02 mm)
0.045 (1.14 mm)
0.030 (0.76 mm)
0.055 (1.40 mm)
0.051 (1.30 mm)
Dia.
0.020 (0.51 mm) Typ.
247-001
0.010 (0.24 mm)
Ref.
0.048 0.005
0.012 (0.30 mm)
Typ.
-210
Schematic
0.033 (0.84 mm)
Min.
0.064 (1.63 mm)
0.060 (1.52 mm)
2 PLCS
0.124 (3.15 mm)
0.119 (3.02 mm) Dia.
404-801
0.025 (0.63 mm)
Max.
-240
Schematic
1
2
0.097 (2.46 mm)
0.83 (2.11 mm)
0.225 (5.72 mm)
0.205 (5.20 mm)
-011 (240)
50°
45°
0.175 (4.44 mm)
0.125 (3.18 mm)
2 Plcs.
0.064 (1.63 mm)
0.060 (1.52 mm)
0.098 (2.49 mm)
0.092 (2.34 mm)
Cover Dia.
0.083 (2.20 mm)
0.077 (1.95 mm)
023-000
0.022 (0.56 mm)
0.018 (0.46 mm)
2 Plcs.
Colored Dot
Denotes Cathode
0.104 (2.64 mm)
0.092 (2.34 mm)
Sq.
0.042 (1.06 mm)
0.028 (0.71 mm)
0.005 (1.27 mm)
0.003 (0.76 mm)
325-011
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
4
December 18, 2008 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200138 Rev. D
Data Sheet • SMV2019–SMV2023
Copyright © 2002, 2003, 2004, 2005, 2006, 2007, 2008, Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided
by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and
Conditions of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands
and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are
incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200138 Rev. D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • December 18, 2008
5
相关型号:
©2020 ICPDF网 联系我们和版权申明