CENB1040A1803F01 [SLPOWER]

ITE Switch-Mode Power Supply; ITE开关模式电源
CENB1040A1803F01
型号: CENB1040A1803F01
厂家: SL Power Electronics    SL Power Electronics
描述:

ITE Switch-Mode Power Supply
ITE开关模式电源

开关
文件: 总2页 (文件大小:219K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
CENB1040  
Universal 40 Watt Series  
ITE Switch-Mode Power Supply  
3 Year Warranty  
100-240VAC Universal Input  
Meets EISA2007, CEC Efficiency Level V,  
EU (EC) No 278/2009 Phase II  
Desktop Style  
Limited Power Source  
Certified to UL/EN60950-1, 2nd Edition  
5V to 48V Single Output Models, up to 40W  
Modified and Custom Designs Available  
Regulated Output with Low Ripple  
No Load Power Consumption <0.3W  
Impact-Resistant Polycarbonate Enclosure  
LPS  
All Specifications are typical at nominal input, full load at 25  
RoHS  
Specifications  
AC Input  
°
C unless otherwise stated.  
MTBF  
>100,000 hours (calculated)  
100-240VAC, -/-10%, 47-63 Hz, 1  
Input Current  
Inrush Current  
Input Fuse  
100VAC: 1.1A Hold-up Time  
18 ms min. @ 115Vac, 60 ms @ 230 Vac  
Hiccup Mode  
60 A peak, 264 V, cold start  
Overload Protection  
3.15A, 250V Internal Primary Current Fuse is provided Short Circuit Protection  
Hiccup Mode  
Efficiency  
Meets EISA2007, CEC Efficiency Level V,  
EU (EC) No 278/2009 Phase II  
Topology  
Switching – Fixed Frequency Flyback  
Output Voltage  
Output Power  
See chart  
Safety Standards  
EMC  
EN/IEC/CSA/UL60950-1, 2nd Edition, LPS  
See chart below  
See chart  
Ripple and Noise  
1% pk-pk max., 20MHz BW  
Dielectric Withstand  
Input-Output: 4,242Vdc  
Input-GND: 1,500 Vac, Output-GND: 500Vdc  
Line & Load Voltage Regulation  
Transient Response  
Minimum Load  
Line: +/- 1%, Load: +/-5%  
500µs max., 50% load step, typical  
Not required  
Operating Temperature  
Storage Temperature  
Relative Humidity  
0° to 40°C, no derating  
-30 to +85°C  
5% to 95%, non-condensing  
Case Material  
Black 94V0 Polycarbonate Altitude  
102 x 60 x 32mm. See outline drawing Output Cable  
250g Output Connector  
0 to 10,000 ft  
Case Dimensions  
Weight  
#18AWG (UL1185), 1,500mm, 2 conductor  
2.5mm barrel type (Ault #3), center positive (+)  
EMC Specifications  
Conducted Emissions  
EN55022 Class B, FCC Part 15, Class B.  
Radiated Emissions  
EN55022 Class B, FCC Part 15, Class B.  
EN61000-3-2, Class A  
Line Frequency Harmonics  
Voltage Fluctuations/Flicker  
Static Discharge Immunity  
Radiated RF Immunity  
EN61000-3-3  
EN61000-4-2, 6kV Contact Discharge, 8kV air discharge  
EN61000-4-3, 3V/m.  
EFT/Burst Immunity  
EN61000-4-4, 2kV/5kHz.  
Line Surge Immunity  
EN61000-4-5, 1kV differential, 2kV common-mode  
EN61000-4-6, 3Vrms  
Conducted RF Immunity  
Power Frequency Magnetic Field Immunity  
Voltage Dip Immunity  
EN61000-4-8, 3A/m  
EN61000-4-11, Criteria B  
______________________________________________________________________________________________________________________________ 1 of 2  
SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info@slpower.com www.slpower.com  
CENB1040  
Universal 40 Watt Series  
ITE Switch Mode Power Supply  
3 Year Warranty  
Model Number  
Volts (V)  
Output Current (max)  
Max Watts  
Ripple (Vp-p max)  
CENB1040A0503F01  
CENB1040A0903F01  
CENB1040A1203F01  
CENB1040A1503F01  
CENB1040A1803F01  
CENB1040A2403F01  
CENB1040A4803F01  
5 V  
9 V  
5.00 A  
4.00 A  
3.40 A  
2.76 A  
2.20 A  
1.70 A  
0.83 A  
25.0 W  
36.0 W  
40.8 W  
40.5 W  
39.6 W  
40.8 W  
39.8 W  
50mV  
90mV  
12 V  
15 V  
18 V  
24 V  
48 V  
120mV  
150mV  
180mV  
240mV  
480mV  
Notes: Part numbers above include #3 output connector and IEC320 C14 grounded input receptacle. See below for other options.  
Model Number Key  
CENB 1 040 A VV 03 F 01  
Model  
"01" = Standard. "02" and higher indicates a modified model.  
"F" = IEC320 C14 grounded, Other options available, see next page.  
Input Connector:  
Output Connector: "03" = 2.5mm Barrel Type Connector. Other options available, contact factory.  
Output Voltage:  
Model  
"05" = 5Vdc, "12" = 12Vdc, "24" = 24Vdc, etc.  
"A" = Original Configuration  
Output Power:  
# of Outputs  
Product Family:  
"040" = 40 Watts  
"1" = Single Output  
"C" = Commercial/ITE/Industrial, "E" = External, "NB" = Model Series Designator  
Input Receptacle Options  
Output Connector  
IEC320 - C14  
Class I  
IEC320 - C18  
Class II  
IEC320 - C8  
Class II  
Grounded (F) Ungro unded (Q) "Shaver" (N)  
Outline Drawing  
61  
34  
101  
Dimensions are in mm  
Data Sheet © 2010 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication.  
However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.  
Rev. 12-22-2010  
______________________________________________________________________________________________________________________________ 2 of 2  
SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info@slpower.com www.slpower.com  

相关型号:

CENB1040A2403F01

ITE Switch-Mode Power Supply
SLPOWER

CENB1040A4803F01

ITE Switch-Mode Power Supply
SLPOWER

CENB1050

I.T.E. Switch-Mode Power Supply
SLPOWER

CENB1060

I.T.E Switch-Mode Power Supply
SLPOWER

CENB1080

ITE Switch-Mode Power Supply
SLPOWER

CENB1080A1251F01

ITE Switch-Mode Power Supply
SLPOWER

CENB1080A1503F01

ITE Switch-Mode Power Supply
SLPOWER

CENB1080A1803F01

ITE Switch-Mode Power Supply
SLPOWER

CENB1080A2403F01

ITE Switch-Mode Power Supply
SLPOWER

CENB1080A4803F01

ITE Switch-Mode Power Supply
SLPOWER

CENB1080_15

ITE Switch-Mode Power Supply
SLPOWER

CENB1090

ITE Switch-Mode Power Supply
SLPOWER