CINT3110A1708K01 [SLPOWER]
The CINT3110 Series are industrial grade, high efficiency, triple output power supplies in a small 2â x 4â size.; 该CINT3110系列是工业级，高效率，三路输出电源，在小2A ???? X 4A ????尺寸。
| 型号： | CINT3110A1708K01 |
| 厂家： | 
SL Power Electronics |
| 描述： | The CINT3110 Series are industrial grade, high efficiency, triple output power supplies in a small 2â x 4â size. |
| 文件： | 总10页 (文件大小：1003K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
CINT3110
110W Triple Output
Industrial Series
Features
.
.
.
.
.
.
2” x 4” x 1.3” Package
Suitable for 1U Applications
110W w/air, 80W convection cooled
Universal Input 90-264Vac
Efficiency 87% typical
Approved to CSA/EN/IEC/UL60950-1,
2nd Edition
.
.
.
.
Power Fail Signal
Remote Sense
3 Year Warranty
RoHS Compliant
Description
The CINT3110 Series are industrial grade, high efficiency, triple output power supplies in a small 2” x 4” size. The
CINT3110 family is ideal for Industrial and ITE applications requiring multiple outputs and small footprint. Compliant to
IEC60950-1 2nd edition, the CINT3110 models feature outputs of 5/±12V, 5/±15V, 5/±24V, includes a Power Fail/DC OK
signal, and meet Class B Conducted EMI.
Model Selection
Model
Output Current**
Ripple &
Noise***
Total
Regulation
OVP
Threshold
Number
Volts*
5V
w/200LFM air
Convection
V1
V2
V3
V1
V2
V3
V1
V2
V3
14.0A
6.0A
1.0A
14.0A
4.5A
1.0A
12.0A
4.0A
1.0A
10.0A
1.0% pk-pk
1.0% pk-pk
2.0% pk-pk
1.0% pk-pk
1.0% pk-pk
2.0% pk-pk
1.0% pk-pk
1.0% pk-pk
2.0% pk-pk
7.5V max.
115%-135%
115%-135%
7.5V max.
2%
CINT3110A0508K01
CINT3110A1708K01
CINT3110A1908K01
12V
-12V
5V
4.5A
1.0A
10.0A
3.5A
1.0A
8.0A
3.0A
1.0A
3%
10%
2%
15V
-15V
5V
115%-135%
115%-135%
7.5V max.
3%
10%
2%
24V
115%-135%
115%-135%
3%
-24V
10%
Notes:
*
5V output is adjustable with +/-10% range
** Total convection power is 80 Watts.
*** Measured with noise probe directly across output terminals, and load terminated with 0.1μF ceramic and 10μF low ESR capacitors. Ripple & Noise of V2 at
no load is 2% maximum.
General Specifications
Less than 2 sec. @115Vac (inversely
proportional to input voltage and thermistor
temperature)
100-240Vac, ±10%, 47-63Hz, 1
120–370Vdc
AC Input
Turn On Time
Hold-up Time
115Vac: 1.5A, 230Vac: 0.75A
16mS typical at 110W, 120Vac input
Input Current
www.slpower.com
CINT3110 REV 1.1, 26-NOV-12
1
CINT3110
110W Triple Output
Industrial Series
General Specifications (continued)
264Vac, cold start: will not exceed 45A
AC Power Fail, DC OK
Inrush Current
Signals
Overload
Protection
F1, F2: 2.5A, 250Vac fuses provided on all
models
150%-300% above rating for V2 & V3, 110%-
200% for V1. Hiccup Mode
Input Fuses
Earth Leakage
Current
Short Circuit
Protection
Provided - no damage will occur if the output is
shorted.
<290μA@264Vac, 60Hz, NC
Overvoltage
Protection
87% typical at 230Vac
See models chart for trip range.
PFC: 75kHz typical
Efficiency
110W continuous with 200 lfm airflow, 80W
convection cooled – See chart for specific
voltage model ratings.
Switching
Frequency
Output Power
500µS typ. for return to within 0.5% of
nominal, 50% load step. i/t <0.2A/μS.
Max Volt Deviation = 3%
Input-Output: 4000Vac
Input-Ground: 1800Vac
Output-Ground: 500Vac
Transient
Response
Isolation
Operating
Temperature
See models chart
-10°C to +70°C
Ripple and Noise
Output Voltage
Temperature
Derating
Derate output power linearly above 50°C to 50%
at 70°C
See models chart
Voltage
Adjustability
Storage
Temperature
+/-10% from nominal on 5V output
Not required
-40°C to +85°C
Operating: -500 to 10,000 ft.
Non-operating: -500 to 40,000 ft.
Minimum Load
Altitude
See models chart
5% to 95%, non-condensing
Total Regulation
Relative Humidity
Operating: 0.003g²/Hz, 1.5grms overall, 3
axes, 10 min/axis
Non-Operating: 0.026g²/Hz, 5.0grms overall,
3 axes, 1 hr/axis
Operating: Half-sine, 20gpk, 10ms, 3 axes, 6
shocks total
Non-Operating: Half-sine, 40 gpk, 10 ms, 3
axes, 6 shocks total
Vibration
Shock
W: 2.0” x L: 4.0” x H: 1.3”
200g
EN/CSA/UL/IEC 60950-1, 2nd Edition
Dimensions
Weight
Safety Standards
MTBF
245,000 hours, 25°C Ambient, 110Vac input
Auxiliary Signals
During normal operation, stays HIGH. Signal
goes LOW with at least 6mS warning before
loss of DC output from AC failure.
Open collector logic signal goes and stays HIGH
100mS to 500mS after main output reaches
regulation.
AC Power Fail:
DC OK:
(5V output, optional) Will compensate for 0.5V
drop min. Will operate without remote sense
connected. Reverse connection protected.
Remote Sense:
Notes:
1. Specifications are for convection rating at factory settings at 115 Vac input, 25°C ambient unless otherwise stated.
2. For DC input an external DC safety rated fuse must be used.
www.slpower.com
CINT3110 REV 1.1, 26-NOV-12
2
CINT3110
110W Triple Output
Industrial Series
EMI/EMC Compliance
EN55011/22 Class B, FCC Part 15, Subpart B, Class B
Conducted Emissions
EN55011/22 Class A; FCC Part 15, Subpart A, Class A
EN61000-4-2, Criteria A, 6kV Contact Discharge, 8kV air discharge
EN61000-4-3, 3V/m. Criteria A
Radiated Emissions
Static Discharge Immunity
Radiated RF Immunity
EFT/Burst Immunity
EN61000-4-4, 2kV/5kHz, Criteria A
EN61000-4-5, 1kV differential, 2kV common-mode, Criteria A
EN61000-4-6, 3Vrms, Criteria A
Line Surge Immunity
Conducted RF Immunity
Power Frequency Magnetic Field Immunity
Voltage Dip Immunity
Line Harmonic Emissions
Flicker Test
EN61000-4-8, 3A/m, Criteria A
EN61000-4-11, 0% Vin, 0.5cycle; 40% Vin, 5 cycles; 70% Vin, 25 cycles;
Criteria A
EN61000-3-2, Class A, B, C, & D
EN61000-3-3, Complies (dmax<6%)
Mechanical Drawing
Notes:
1. All dimensions in inches (mm), tolerance is ±.02”.
2. Mounting holes should be grounded for EMI purpose
3. Mounting J101 is safety ground connection
4. This power supply requires mounting on metal standoffs 0.20” (5 m) in height.
www.slpower.com
CINT3110 REV 1.1, 26-NOV-12
3
CINT3110
110W Triple Output
Industrial Series
Connector Information
Input Connector
J100
Ground
J101
DC Output Connector
J200
Signal Connector
J300
PIN 1) Power Fail/DC OK
PIN 2) GND
PIN 3) +Remote Sense
PIN 4) –Remote Sense
PIN 1) AC NEUTRAL
PIN 1) +V1
PIN 2) +V1
PIN 3) GND
PIN 4) GND
PIN 5) GND
PIN 6) GND
PIN 7) V2
PIN 8) V3
PIN 2) EMPTY
PIN 3) AC LINE
0.187” FASTON TAB
Mating Connector:
Molex 09-50-3031
Pins= 08-52-0072
Mating Connector:
JST VHR-8N
Pins = SVH-21T-P1.1
Mating Connector:
Molex 51065-0400
Pins = 50212-8100
Mating Connector:
Molex 01-90020001
Isolation Specifications
Parameter
Conditions/Description
Min
Nom
Max
Units
Input/Ground
Input/Output
Output/Ground
Basic
Reinforced
Operational
Insulation Safety Rating
Input/Ground
Input/Output
Output/Ground
1800
4000
500
Vac
Vac
Vac
Electric Strength Test Voltage
-
-
Leakage Current
Parameter
Conditions/Description
Max
Normal Condition (NC)
Single Fault Condition (SFC)
290µA
420µA
Earth Leakage Current
Touch Current
Normal Condition (NC)
Single Fault Condition (SFC)
90µA
170µA
Input Specifications
All specifications apply over specified input voltage, output load, and temperature range, unless otherwise noted.
Parameter
Conditions/Description
Min
Nom
Max
Units
Input Voltage
Input Frequency
Input Current
90
47
115/230
50/60
264
63
Vac
Hz
A
115Vac/max load
230Vac/max load
1.5
Input Current
Inrush Current
0.75
45
A
A
264Vac, cold start, 25°C
-
-
-
Vi nom, Io nom
CINT3110A0508K01
CINT3110A1708K01
CINT3110A1908K01
Efficiency
87%
-
%
Output Specifications
Parameter
Conditions/Description
Min
Nom
Max
Units
Output Current V1
Output Current V2
Output Current V3
0
0
0
10.0
4.5
1
14.0
6.0
1
ADC
CINT3110A0508K01
Output Current V1
Output Current V2
Output Current V3
0
0
0
10.0
3.5
1
14.0
4.5
1
CINT3110A1708K01
CINT3110A1908K01
ADC
ADC
Output Current V1
Output Current V2
Output Current V3
0
0
0
8.0
3.0
1
12.0
4.0
1
www.slpower.com
CINT3110 REV 1.1, 26-NOV-12
4
CINT3110
110W Triple Output
Industrial Series
Output Specifications (continued)
Parameter
Conditions/Description
Min
-2
Nom
Max
Units
Static Line Regulation V1
Static Line Regulation V2
Static Line Regulation V3
Vi min-Vi max, Vi nom, 0-100% Io1 max
-
2
% Vo nom
Vi min-Vi max, Vi nom, 0-100% Io2 max
Vi min-Vi max, Vi nom, 0-100% Io3 max
Vi min-Vi max, Vi nom, 0-100% Io1 max
Vi min-Vi max, Vi nom, 0-100% Io2 max
Vi min-Vi max, Vi nom, 0-100% Io3 max
Vin = 120Vac, Po = 110W
-3
-10
-2
-
-
-
-
-
-
3
10
2
% Vo nom
% Vo nom
% Vo nom
% Vo nom
% Vo nom
mS
Static Load Regulation V1
(Droop Characteristic)
Static Load Regulation V2
(Droop Characteristic)
-3
3
Static Load Regulation V3
(Droop Characteristic)
-10
10
-
Hold-Up Time
Dynamic Load Regulation V1, V2, V3
Start-Up Time
16
0
0
0
0
0
3
% Vo nom
S
Load change =50%, di/dt = 0.2A/μS
Vin = 115Vac, Io nom
-
2
Ripple & Noise V1
1%
1%
2%
% Vo nom
% Vo nom
% Vo nom
20MHz bandwidth
20MHz bandwidth
20MHz bandwidth
Ripple & Noise V2
Ripple & Noise V3
Protection
All specifications apply over specified input voltage, output load, and temperature range, unless otherwise noted.
Parameter
Input Fuse
Conditions/Description
T2.5A/250V internal fuse in both line & neutral
2KV(CM) and 1KV(DM) surge
Min
Nom
Max
Units
Not user accessible
Input Transient Protection
Short Circuit Protection
Overload Protection
Overvoltage Protection
2
KV (CM)
Hiccup Mode
Hiccup Mode
Latching Type, recycle AC input to reset
See models chart for trip ranges
Characteristic Curves (Note: All waveforms below are based on CINT3110A0508K01 model)
Output vs. Temperature
80W convection cooled and 110W continuous with 200 LFM airflow. Derate output power to 50% at 70C.
www.slpower.com
CINT3110 REV 1.1, 26-NOV-12
5
CINT3110
110W Triple Output
Industrial Series
Ripple & Noise
To verify that the output ripple and noise does not exceed the level specified in the product specification. Measured using a scope probe socket with
0.1µF ceramic and a 10µF electrolytic capacitor connected in parallel across it, BW limit with 20MHz.
Output Transient Response V1
50% load step within the regulation limits of minimum and maximum load, di/dt<0.2A/μSec. Recovery time not specified as there is no laps in regulation
with a 50% Load Step. Maximum voltage deviation is 3%.
Output Transient Response V2
50% load step within the regulation limits of minimum and maximum load, di/dt<0.2A/μSec. Recovery time not specified as there is no laps in regulation
with a 50% Load Step. Maximum voltage deviation is 3%.
www.slpower.com
CINT3110 REV 1.1, 26-NOV-12
6
CINT3110
110W Triple Output
Industrial Series
Output Transient Response V3
50% load step within the regulation limits of minimum and maximum load, di/dt<0.2A/μSec. Recovery time not specified as there is no laps in regulation
with a 50% Load Step. Maximum voltage deviation is 3%.
Output Overload Characteristic V1
Supply shall protect itself against Overload conditions. The Power Supply shall recover from Overload Conditions without operator intervention.
Output Overload Characteristic V2
www.slpower.com
CINT3110 REV 1.1, 26-NOV-12
7
CINT3110
110W Triple Output
Industrial Series
Output Overload Characteristic V3
Output Short Circuit Characteristic V1
Supply shall protect itself against Short Circuit conditions. The Power Supply shall recover from short circuit conditions without operator intervention.
Output Short Circuit Characteristic V2
www.slpower.com
CINT3110 REV 1.1, 26-NOV-12
8
CINT3110
110W Triple Output
Industrial Series
Output Short Circuit Characteristic V3
Output Overvoltage Characteristic V1
Supply shall protect itself against over voltage conditions. The Power Supply shall latch and require AC input recycle to reset.
AC input 90V 60Hz
Output Overvoltage Characteristic V2
www.slpower.com
AC input 264V 50Hz
CINT3110 REV 1.1, 26-NOV-12
9
CINT3110
110W Triple Output
Industrial Series
Output Overvoltage Characteristic V3
Startup Time
Start up time is <2seconds
Hold-up Time
Hold up time is 16mS minimum
Power Fail Signal Timing
Active Low TTL logic signal goes high 100 - 500 ms after main output; it goes low at least 6 mS before loss of regulation.
Data Sheet © 2012 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. However, SL Power accepts no responsibility for
consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.
www.slpower.com
CINT3110 REV 1.1, 26-NOV-12
10
相关型号：
CINT3110A1908K01
The CINT3110 Series are industrial grade, high efficiency, triple output power supplies in a small 2â x 4â size.
SLPOWER
©2020 ICPDF网 联系我们和版权申明