DBX-274-1224F [SLPOWER]
Power Supply Module;
| 型号： | DBX-274-1224F |
| 厂家： | 
SL Power Electronics |
| 描述： | Power Supply Module |
| 文件： | 总2页 (文件大小：86K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
2 5 0 , 2 7 5 , 3 5 0 WATTS
MULTIP LE OUTP UT
2 4 /2 8 AND 4 8 VDC INP UT
DCT-250
DBX-275
DCT-350
DCX-350
Option F
STANDARD DBX SERIES
24/28 VDC INPUT – MULTIPLE OUTPUT
MODEL
PWR
OUTPUT #1
OUTPUT #2
OUTPUT #3
OUTPUT #4
DBX-273-0512 275
DBX-274-1205 275
DBX-274-1224 275
+5V @ 50A
+5V @ 50A
+5V @ 50A
+12V @ 8/12A pk
+12V @ 8/12A pk
+12V @ 8/12A pk
-12V @ 4A
-12V @ 4A
-12V @ 4A
5.2V @ 2 A
24V @ 1.5A
STANDARD DCT, DCX SERIES
48 VDC INPUT – MULTIPLE OUTPUT
MODEL
PWR OUTPUT #1
OUTPUT #2
OUTPUT #3
OUTPUT #4
DCT-253-0512
DCT-353-0512
DCX-353-0512 350
DCX-354-1205 350
250
350
+5V @ 30A
+5V @ 45A
+5V @ 50A
+5V @ 50A
+12V @ 5A
+12V @ 6A
+12V @ 8/12A pk
+12V @ 8/12A pk
-12V @ 5A
-12V @ 6A
-12V @ 4A
-12V @ 4A
Option C
5.2V @ 2A
Featuring:
• Over 3 watts/in3 power density
These series are particularly suitable for
critical, “can’t fail”; mobile; or transportable
systems. All models share the same foot-
print and can include current sharing for
redundancy (consult factory for details).
Optional DC power fail, covers, and
fan/cover assemblies are available.
These series are form-fit compatible with
the 9” SC, MAX, MTC, and MPS Series
• Meets international safety
requirements
• All outputs regulated ±1%
• High peak currents for motor
starting
• System air and self-cooling options
• Available in dual AC input range
Condor D.C. Power Supplies, Inc., A subsidiary of SL Industries, Inc. 805-486-4565 • (800) 235-5929 Fax: (805) 487-8911 http://www.condorpower.com
2 5 0 , 2 7 5 , 3 5 0 WATTS
9 ” x 5 ” x 2 .5 ”
DCT-2 5 0 ,3 5 0 , DBX-2 7 5 , DCX-3 5 0
DBX, DCT, DCX
DBX, DCT, DCX
3.2 lbs - 1.5 kgs
with Option F
3.8 lbs - 1.7 kgs
Dimensions:
Inches
Millimeters
SPECIFICATIONS: ALL MODELS
INPUT
OPTIONS:
DC Input: DB, DBT, and DBX models 20-32 Vdc range, internally fused for 20 A. DC, DCT,
DCX, and DPS models 40.8-60 Vdc range, internally fused for 15 A.
Efficiency: 70 to 75% typical.
Option “C”, Cover: Limits contact with power supply interior.
Option “F”, Fan/Cover Assembly: Cover with integral ball-bearing fan provides proper cooling
to achieve full ratings at 50°C ambient temperature.
Option “G”, DC Power Good: Provides a TTL “1” open collector when output #1 is above
4.6 V nominal.
Option “V”, Fan/Cover Assembly: Low profile, end venting cover with integral
ball-bearing fan.
OUTPUT
Adjustability: All outputs user adjustable ±5% minimum.
Line & Load Reg: ±1% over DC input range and 0 to 100% load change, except DPS models
hold ±3% on +5 V output (preprogrammed slope). Multiple output units require a
minimum load of 10% on the +5 V output when drawing full load on the auxiliary outputs.
Ripple & Noise: Less than 1% p-p or 100 mV, whichever is greater.
Remote Sense (Output #1): Compensates for 250 mV total line drop. Open sense lead
protection. (See Redundancy, below.)
Temperature Coefficient: 0.02% per degree C.
Stability: 0.1% over 8 hours after 30 minutes warm-up.
Transient Response: Output voltage returns to within 1% in less than 500 µs for a 50% load
change. Peak transient does not exceed 5%.
Consult factory for other available options.
DC INPUT
FUNCTION
TB1-(–)
TB1-(+)
TB1-(
–48 Vdc
–48 Vdc Input
–48 Vdc Return
Safety Ground
+24 Vdc
+24 Vdc Return
+24 Vdc Input
Safety Ground
CONNECTOR
Barrier strip
#6-32 screws
3/8” centers
)
Overload Protection: All outputs are protected against overload and short circuit. Automatic
recovery upon removal of fault.
DC OUTPUT
FUNCTION
LOCATION
NOTES
CONNECTOR
Overvoltage Protection (Output #1): Protects load against power supply induced overvoltage.
Trip point is factory set so that output voltage cannot exceed 136% of nominal.
Peak Output Current: Dual current ratings define continuous and peak currents. The peak
current shown can be delivered for a maximum period of 30 seconds.
Remote Inhibit: Contact closure to the negative sense line drops output power to nominal
zero.
Redundancy (DPS only): External OR-ing diodes and slope program current sharing on
output #1 provide “N+1” capability. Remote sense (+S) compensates for additional 0.6 V
diode voltage drop. Current sharing remains within 10% of the unit’s full output current
rating.
Output #1
Terminal marked +V Main Output
Bus bars
#10-32 screws
Terminal marked -V
TB2-3
Rtn (Common)
Output #2
(If provided)
Output #3
TB2-4
Rtn (Common)
Barrier strip
#6-32 screws
3/8” centers
TB2-5
(If provided)
Output #4
TB2-4
Rtn (Common)
TB2-1
(+) Floating Output
(–) Floating Output
(If provided))
TB2-2
Reverse Voltage: Protected against reverse voltage up to supply current rating.
ENVIRONMENTAL
STATUS AND CONTROL
Thermal Protection: Shuts down power supply if overheated. Automatic recovery.
Temperature Range: 0° to 50°C at full ratings.
Safety Agencies: Most models are approved to UL1950; CSA 22.2 #234; IEC 950 and TÜV
EN60950, Class 1 SELV., CE 72/23/EEC/93/68EEC (low voltage directive).
Conducted RFI: Meets FCC Part 15, Subpart J, Class A; EN55022 Class B; CISPR 22 Class B.
Cooling: 30 CFM required to achieve full ratings.
FUNCTION
LOCATION
NOTES
CONNECTOR
J1-1(+ S)
J1-2 (– S)
J1-3
Output #1 Sense
Output #1 Sense Rtn
Reference to J1-2
Short to J1-2
AMP MTA type
#640456-4 pin
header (locking)
Remote Sense
DC Power Good*
Inhibit
J1-4 (IH)
Output Isolation: Isolated from ground 50 Vdc, except 100 Vdc for models rated 48 Vdc
output.
*Optional function
Condor D.C. Power Supplies, Inc., A subsidiary of SL Industries, Inc. 805-486-4565 • (800) 235-5929 Fax: (805) 487-8911 http://www.condorpower.com
相关型号：
DBX25S-0L2-A197-146
D Subminiature Connector, 25 Contact(s), Female, Solder Terminal, Receptacle,
ITT
DBX25S-OL4-A191-A197-146
D Subminiature Connector, 25 Contact(s), Female, Solder Terminal, Receptacle,
ITT
©2020 ICPDF网 联系我们和版权申明