ME10A0703B01 [SLPOWER]
10W-12W Single Output External Power Medical Series;
| 型号： | ME10A0703B01 |
| 厂家： | 
SL Power Electronics |
| 描述： | 10W-12W Single Output External Power Medical Series |
| 文件： | 总4页 (文件大小：599K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
ME10
10W-12W Single Output External Power
Medical Series
Features
.
Meets UL/EN/IEC60601-1-2, 4th edition for
EMC*
.
Approved to EN/IEC/UL60601-1, 3rd edition
applications with and isolation levels which
satisfy the 2 MOPP requirements
.
Meets DoE Efficiency Level VI Requirements
.
.
No load input power
Average Efficiency
.
.
Up to 12W of AC-DC Power
Universal Input 90-264Vac Input Range
.
Desktop and Wall-Plug versions
.
Meets EN55011/CISPR11, FCC Part 15.109
Class B Conducted & Radiated Emissions, with
6db margin
.
.
.
.
E-cap life of >7 years
<1,000,000 Hours MTBF
3 Year Warranty
IP22 Rated Enclosure
LPS
Description
A high performance AC to DC external power supply family designed for medical applications. The ME10 Medical Series
external AC-DC power supplies are approved to safety EN/IEC/UL60601-1, 3rd edition, with isolation levels which satisfy the 2
MOPP requirements; and designed to UL/EN/IEC60601-1-2, 4th edition for EMC*. The ME10 Series models will operate at
universal input range of 90 to 264Vac over the wide temperature range of -20°C to +50°C, delivering full rated output power up
to +40°C and applicable output power derating at 50°C. These models are available in desktop and wall-plug versions, include
an IP22 rating per IEC60529 for the enclosure, and output cable terminated at a variety of output connectors.
*Consult Factory for Table 9 compliance information.
Model Selection
Model
Number
Output
Current
2.0A
Output
Power
10W
Ripple &
Noise¹
75mV pk-pk
Line
Regulation
±1%
Load
Regulation
±5%
Output
Connector
Input
Configuration
Volts
5.0V
ME10A0503F01
ME10A0603F01
ME10A0703F01
ME10A0903F01
ME10A1203F01
ME10A1503F01
ME10A2403F01
ME10A0503N01
ME10A0603N01
ME10A0703N01
ME10A0903N01
ME10A1203N01
ME10A1503N01
ME10A2403N01
ME10A0503Q01
ME10A0603Q01
ME10A0703Q01
ME10A0903Q01
ME10A1203Q01
ME10A1503Q01
ME10A2403Q01
5.9V
1.6A
1.3A
1.1A
1.0A
0.8A
0.5A
2.0A
1.6A
1.3A
1.1A
1.0A
0.8A
0.5A
2.0A
1.6A
1.3A
1.1A
1.0A
0.8A
0.5A
10W
10W
10W
12W
12W
12W
10W
10W
10W
10W
12W
12W
12W
10W
10W
10W
10W
12W
12W
12W
75mV pk-pk
75mV pk-pk
90mV pk-pk
120mV pk-pk
150mV pk-pk
240mV pk-pk
75mV pk-pk
75mV pk-pk
75mV pk-pk
90mV pk-pk
120mV pk-pk
150mV pk-pk
240mV pk-pk
75mV pk-pk
75mV pk-pk
75mV pk-pk
90mV pk-pk
120mV pk-pk
150mV pk-pk
240mV pk-pk
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
7.5V
2.5 x 5.5 x 9.5mm
Straight Barrel Type,
center positive
Class I Desktop,
IEC60320 C14
Receptacle
9.0V
12.0V
15.0V
24.0V
5.0V
5.9V
7.5V
2.5 x 5.5 x 9.5mm
Straight Barrel Type,
center positive
Class II Desktop,
IEC60320 C8
Receptacle
9.0V
12.0V
15.0V
24.0V
5.0V
5.9V
7.5V
2.5 x 5.5 x 9.5mm
Straight Barrel Type,
center positive
Class II Desktop,
IEC60320 C18
Receptacle
9.0V
12.0V
15.0V
24.0V
www.slpower.com
ME10 Rev 2.7 02-MAY-16
1
ME10
10W-12W Single Output External Power
Medical Series
Model Selection (continued)
Model
Number
Output
Current
2.0A
Output
Power
10W
Ripple &
Noise¹
75mV pk-pk
Line
Regulation
±1%
Load
Regulation
±5%
Output
Connector
Input
Configuration
Volts
5.0V
ME10A0503B01
ME10A0603B01
ME10A0703B01
ME10A0903B01
ME10A1203B01
ME10A1503B01
ME10A2403B01
ME10A0503C01
ME10A0603C01
ME10A0703C01
ME10A0903C01
ME10A1203C01
ME10A1503C01
ME10A2403C01
5.9V
1.6A
1.3A
1.1A
1.0A
0.8A
0.5A
2.0A
1.6A
1.3A
1.1A
1.0A
0.8A
0.5A
10W
10W
10W
12W
12W
12W
10W
10W
10W
10W
12W
12W
12W
75mV pk-pk
75mV pk-pk
90mV pk-pk
120mV pk-pk
150mV pk-pk
240mV pk-pk
75mV pk-pk
75mV pk-pk
75mV pk-pk
90mV pk-pk
120mV pk-pk
150mV pk-pk
240mV pk-pk
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
Class II Wall-Plug,
Interchangeable
7.5V
2.5 x 5.5 x 9.5mm
Straight Barrel Type,
center positive
9.0V
Blades (North American
12.0V
15.0V
24.0V
5.0V
Blade included)²
5.9V
7.5V
2.5 x 5.5 x 9.5mm
Straight Barrel Type,
center positive
Class II Wall-Plug,
Fixed North American
Blades³
9.0V
12.0V
15.0V
24.0V
Notes:
1. Measured at the output connector, with noise probe directly across output and load terminated with 0.1μF ceramic and 10μF low ESR capacitors. For 5V and 6V models, values listed are
typical, 100mV pk-pk maximum with 0.1μF ceramic and 47μF low ESR capacitors used at measurement point.
2. Order blade kit KT-1027K for other blades (EU. UK, Australia)
3. For EU fixed blades, replace “C” in the model number with “M”, for UK blades, replace “C” with “G”, for Australia blades, replace “C” with “H”.
4. For Input Class I models: For AC GND connected to output common (-), insert a “B” in the part number where the “A” is located (ME10B0503F01).
5. All specifications are typical at nominal input, full load, at 25°C ambient unless noted.
General Specifications
Less than 700mS @115Vac, full load
20mS min., at full Load, 100Vac input
AC Input 100-240Vac, ±10%, 47-63Hz, 1∅
Turn On Time
Hold-up Time
115Vac: 0.45A, 230Vac: 0.22A
Input Current
Inrush Current
Input Fuses
Overtemperature
Protection
Will shutdown upon an overtemperature
condition, auto-recovery.
264Vac, cold start: will not exceed 40A
F1, F2: 3.15A, 250Vac fuses (line & neutral
lines) provided on all models
130 to 180% of rating, Hiccup Mode
Hiccup Mode, auto recovery.
Overload Protection
Earth Leakage
Current
Short Circuit
Protection
Overvoltage
Protection
Input-GND: <500μA@264Vac, 60Hz, NC
Output-GND: <4mA@264Vac, 60Hz, NC
>87%, typical
130 to 150% of output voltage, hiccup mode
Efficiency
Input-Output: 2 MOPP
Input-Ground: 1 MOPP
Output-Ground: 1500Vac
EN/IEC/UL60601-1, 3rd edition and
EN/IEC/UL60601-1-11:2010 for Home
Healthcare
10 to 12W continuous – See models chart for
specific voltage model ratings.
Output Power
Isolation
No Load Input
Power
<0.1W per DoE Efficiency Level VI
Requirements
Safety Standards
Operating
Temperature
Temperature
Derating
See models chart
-20°C to +70°C
Ripple and Noise
Output Voltage
See models chart
See derating chart
500µs response time for return to within 0.5%
Transient of final value for any 50% load step over the
-40°C to +85°C
Storage Temperature
range of 5% to 100% of rated load, ∆i/∆t<
0.2A/µs. Max. voltage deviation is +/-3.5%.
Response
Operating: to 5000m.
Non-operating: -500 to 40,000 ft.
See models chart
Regulation
Drop Test
Altitude
1.4m from table top to wooden platform, 6
faces.
5% to 95%, non-condensing
Relative Humidity
Operating: 0.003g/Hz, 1.5grms overall, 3
axes, 10 min/axis, 1-500Hz.
Operating: Half-sine, 20gpk, 10mS, 3 axes,
6 shocks total
Non-Operating: Half-sine waveform, impact
acceleration of 100G, Pulse duration of 6
mS, Number of shocks: 3 for each of the
three axis
Non-Oper.: random waveform, 3 minutes per
axis, 3 axes and Sine waveform, Vib.
frequency/acceleration: 10-500Hz/1g, sweep
rate of 1 octave / minutes, Vibration time of 10
sweeps / axes, 3 axes
>10 year life based on calculations at
115Vac/60Hz & 230Vac/50Hz, ambient 25°C
at 24 hrs per day, 365 days/year, 6 power up
cycles per day.
Vibration
Shock
MTBF
>1,000,000 hours, full load, 110 & 220Vac
input, 25°C amb., per Telcordia 332 Issue 6,
Stress Method.
E-Cap Life
www.slpower.com
ME10 Rev 2.7 02-MAY-16
2
ME10
10W-12W Single Output External Power
Medical Series
EMI/EMC Compliance
EN55011/CISPR11 Class B, FCC Part 15.107, Class B: 6db margin typ, at 115 and 230Vac
EN55011/CISPR11 Class B, FCC Part 15.109, Class B: 3db margin typ, at 115 and 230Vac
High Frequency (100kHz-20MHz): <40mA pk-pk
Conducted Emissions:
Radiated Emissions:
Common Mode Noise:
Electro-Static Discharge (ESD)
Immunity on Power ports:
EN55024/IEC61000-4-2, Level 4: +/- 8kV contact, +/- 15kV air, Criteria A
IEC60601-1-2, 4th Edition, Table 4
EN55022/EN61000-4-3, 10V/m, 80MHz-2.7GHz, 80% AM at 1kHz
IEC60601-1-2, 4th Edition, Table 4
Radiated RF EM Fields Susceptibility
Electrical Fast Transients (EFT) /Bursts:
EN55024/IEC61000-4-4, Level 4, +/- 4.4kV, 100Khz rep rate, 40A, Criteria A
IEC60601-1-2, 4th Edition, Table 5
Surges, Line to Line (Diff Mode) and Line
to GND (CMN Mode)
EN55024/IEC61000-4-5, Level 4, +/-2kV DM, +/-4kV CM, Criteria A
Surpasses IEC60601-1-2, 4th Edition requirements.
EN55022/IEC61000-4-6, 3.6V/m – Level 4, 0.15 to 80Mhz; and 12V/m) in ISM and amateur
radio bands between 0.15Mhz and 80Mhz, 80% AM at 1KHz
IEC60601-1-2, 4th Edition, Table 5
Conducted Disturbances induced by RF
Fields
EN55024/IEC1000-4-8, Level 4: 30 A/m, 50/60 Hz
IEC60601-1-2, 4th Edition, Table 4
Rated Power frequency magnetic fields
EN55024/IECEN61000-4-11: --100% dip for 10 mS, at 0, 45, 90, 135, 180, 225,
270 and 315 degrees, 100% dip for 20mS, 0 deg., Criteria A
--100% dip for 5000mS (250/300 cycles), Criteria B
--60% dip for 100mS, Criteria B
Voltage Interruptions, Dips, Sags &
Surges
--30% dip for 500mS, Criteria A
IEC60601-1-2, 4th Edition, Table 5
EN55011/EN61000-3-2, Class A
EN61000-3-3
Harmonic Current Emissions
Flicker Test
All specifications are typical at nominal input, full load, at 25°C ambient unless noted. Consult factory for information regarding testing for or usage under special
environments.
Mechanical Drawing
IEC60320 C14 Receptacle, 2.5 x 5.5 x 9.5mm Barrel Connector
Interchangeable N.A. Blade, 2.5 x 5.5 x 9.5mm barrel connector
Notes:
1. All dimensions in mm.
2. Weight = 110g
2. Interchangeable blade models come with North American blade fitted. For other blades (EU, UK, Aust.) order blade kit KT1027K.
3. The unit should not be covered or enclosed to protect against excessive case temperature rise.
www.slpower.com
ME10 Rev 2.7 02-MAY-16
3
ME10
10W-12W Single Output External Power
Medical Series
Derating Chart:
Connector Information
Standard models include a 2.5 x 5.5 x 9.5mm straight barrel type connector (Ault #3), center positive. Other standard options are listed below.
The “03” in the standard model number is replaced by the applicable digits below:
Data Sheet © 2016 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. However, SL Power accepts no responsibility for
consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.
www.slpower.com
ME10 Rev 2.7 02-MAY-16
4
相关型号：
©2020 ICPDF网 联系我们和版权申明