MENB1010A0544B01 [SLPOWER]
AC/DC WALL MOUNT ADAPTER 5V 10W;型号: | MENB1010A0544B01 |
厂家: | SL Power Electronics |
描述: | AC/DC WALL MOUNT ADAPTER 5V 10W |
文件: | 总2页 (文件大小:128K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MENB1010
Universal 10 Watt Series
Medical Switch-Mode Power Supply
3 Year Warranty
•100-240Vac Universal Input Range
•Meets EISA2007, CEC Efficiency Level V,
EU (EC) No 278/2009 Phase II
•Desktop & Wall Plug Styles
•5V to 24V Single Output Models, up to 12W
•Modified and Custom Designs Available
•Regulated Output with Low Ripple
•Impact-Resistant Polycarbonate Enclosure
•No load Power Consumption <0.3W
•Limited Power Source
•Certified to UL/EN/IEC60601-1, 3rd Edition, 2xMOPP Isolation
RoHS
Specifications
All Specifications are typical at nominal input, full load at 25C unless otherwise stated.
MTBF
100Vac: 0.27A Hold-up Time
60 A peak max at 264 Vac Overload Protection
>100,000 hours (calculated)
18 mS min. @ 115Vac, 60 mS min. @ 230 Vac
Hiccup Mode
AC Input
100-240Vac, -/-10%, 47-63 Hz, 1
Input Current
Inrush Current
Input Fuse Internal Primary Current Fuse provided (1A, 250Vac rated) Short Circuit Protection
Hiccup Mode
Efficiency
Meets EISA2007, CEC Efficiency Level V,
EU (EC) No 278/2009 Phase II
Topology
Switching – Fixed Frequency Flyback
Output Voltage
Output Power
See chart
See chart
Safety Standards
EN/IEC/CSA/UL60601-1, 3rd Edition
See Chart below
EMC, Radiated & Conducted
Ripple and Noise
1% pk-pk max., 20MHz BW
Dielectric Withstand
Input-Output: 2 MOPP,
Input-Ground: 1 MOPP, Output-Ground: 500Vac
0 to 40C, no derating
-30 to +85C
Line & Load Voltage Regulation
Minimum Load
Line: +/- 1%, Load: +/-5%
Not required
Operating Temperature
Storage Temperature
Case Material
Black 94V-0 Polycarbonate Relative Humidity
5% to 95%, non-condensing
-500 to 10,000 ft
Case Dimensions
Weight
84 x 47 x 32mm. See outline drawing
110g
#20AWG (UL2468), 1500mm, 2 conductor
Operating Altitude
Non-operating Altitude
Output Connector
-500 to 40,000 ft
Output Cable
2.5mm barrel type (Ault #3), center contact (+)
Other options available, contact the factory for details
EMC Specifications
Conducted Emissions
Radiated Emissions
EN55011 Class B, FCC Part 15, Class B.
EN55011 Class B, FCC Part 15, Class B.
EN61000-3-2, Class A
Line Frequency Harmonics
Voltage Fluctuations/Flicker
Static Discharge Immunity
Radiated RF Immunity
EFT/Burst Immunity
EN61000-3-3
EN61000-4-2, 6kV Contact Discharge, 8kV air discharge
EN61000-4-3, 3V/m.
EN61000-4-4, 2kV/5kHz.
Line Surge Immunity
Conducted RF Immunity
EN61000-4-5, 1kV differential, 2kV common-mode
EN61000-4-6, 3Vrms
Power Frequency Magnetic Field Immunity
Voltage Dip Immunity
EN61000-4-8, 3A/m
EN61000-4-11, Criteria A
________________________________________________________________________________________________________________________________ 1 of 2
SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info@slpower.com www.slpower.com
MENB1010
Universal 10 Watt Series
Medical Switch-Mode Power Supply
3 Year Warranty
Model Number
Volts (V)
Output Current (max)
Max Watts
Ripple (Vp-p max)
MENB1010A0503F01
MENB1010A0603F01
MENB1010A0703F01
MENB1010A0903F01
MENB1010A1203F01
MENB1010A1503F01
MENB1010A1603F01
MENB1010A1803F01
MENB1010A2403F01
MENB1010A4803F01
5 V
6 V
7.5 V
9 V
12 V
15 V
16 V
18 V
24 V
48 V
2.00 A
2.00 A
1.60 A
1.10 A
1.00 A
0.80 A
0.75 A
0.67 A
0.50 A
0.25 A
10.0 W
12.0 W
12.0 W
10.0 W
12.0 W
12.0 W
12.0 W
12.0 W
12.0 W
12.0 W
50 mV
60 mV
75 mV
90 mV
120 mV
150 mV
160 mV
180 mV
240 mV
480 mV
Notes: Part numbers above include #3 output connector and IEC320 C14 grounded input receptacle. See below for other options.
Model Number Key
MENB 1 010 A VV 03 F 01
Model
"01" = Standard. "02" and higher indicates a modified model.
"F" = IEC320 C14 grounded, Other options available, see below
Input Connector:
Output Connector: "03" = 2.5mm Barrel Type Connector. Other options available, contact factory.
Output Voltage:
Model
"05" = 5Vdc, "12" = 12Vdc, "24" = 24Vdc, etc.
"A" = Original Configuration
Output Power:
# of Outputs
Product Family:
"010" = 10 Watts
"1" = Single Output
"M" = Medical, "E" = External, "NB" = Model Series Designator
AC Input Receptacle Options
Output Connector
Desktop
Wall-Plug
IEC320 - C14
Class I
Grounded
(F)
IEC320 - C18
Class II
IEC320 - C8
N. America N. America
Europe
United
Kingdom
Fixed
Australia
Class II
"Shaver"
(N)
Japan
Interchangable
(B)
Japan
Fixed
(C)
Ungro unded
Fixed
(M)
Fixed
(H)
(Q)
(G)
Notes:
1. For desktop options, choose applicable letter above.
Notes:
1. Ault #3 Connector, center contact (+).
2. For Wall-Plug options, choose the applicable letter above and the unit will be fitted with
the receptacle chosen. The N. A. blade version (B) will be an interchangeable blade.
The other options (C), (M), (G), and (H) will be fixed blades molded in the case.
3. Blade Kit is available which will include one each of a EU, UK, and Australian blade. Kit part #
is KT1027K. These can be used with the (B) version, to allow blades to be changed.
2. Connector is Switchcraft 760 plug or equivalent.
Mating connector is Switchcraft 712A or equivalent.
3. Other connector options are available. Contact your local
SL Power Representative for details.
Outline Drawings
Desktop Style
Wall-Plug Style (Option “B” Shown)
Data Sheet © 2014 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication.
Rev. 4-11-2014
However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.
________________________________________________________________________________________________________________________________ 2 of 2
SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info@slpower.com www.slpower.com
相关型号:
©2020 ICPDF网 联系我们和版权申明