MENT1150A2451F02 [SLPOWER]
Medical / ITE Switch-Mode Power Supply;
| 型号： | MENT1150A2451F02 |
| 厂家： | 
SL Power Electronics |
| 描述： | Medical / ITE Switch-Mode Power Supply |
| 文件： | 总2页 (文件大小：259K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MENT1150
Universal Input 150 Watt Series
Medical / ITE Switch-Mode Power Supply
3
Year Warranty
•100-240VAC Universal Input
•
Meets EISA2007, CEC Efficiency Level V,
EU (EC) No 278/2009 Phase II
•
•
•
•
•
•
•
Desktop Style with LED Power-On indicator
12V to 48V Single Output Models, up to 150W
Modified and Custom Designs Available
Regulated Output with Low Ripple
Impact-Resistant Polycarbonate Enclosure
No Load Power Consumption <0.5W
Meets UL/EN/IEC60601-1 & 60950-1 2nd edition
RoHS
100-240Vac, +/-10%, 47-63 Hz, 1∅
Specifications
All Specifications are typical at nominal input, full load at 25°C unless otherwise stated.
MTBF
> 100K hours (calculated, 25 C at full load)
20 ms min. @ 115VAC
AC Input
Input Current
Inrush Current
Input Fuse
115VAC: 3A, 230VAC: 1.5A Hold-up Time
75A peak @ 264Vac, cold start Overvoltage Protection
130% of nominal output voltage
120-180% of full rated load, auto-recovery
Provided with no damage to supply
Latched, requires input recycling
Meets IEC61000-3-2
4.0A, 250V Internal Primary Current Fuse provided
Overload Protection
Short Circuit Protection
Overtemperature Protection
Input Harmonics
Efficiency
Meets International Efficiency Level V
See chart
Output Voltage
Output Power
Ripple and Noise
Line/Load Regulation
Transient Response
See chart
1% pk-pk max., 20MHz BW
Including Cord: Line: +/- 1%, Load: +/-5%
Safety Standards IEC/EN/UL60601-1 & EN/IEC/UL60950-1 2nd edition
Switching Frequency
Isolation
40kHz to130kHz , variable
Maximum deviation of 5% with 25% to
75% load change and 0.2A/uSec slew rate
Not required
Input-Output: 4000VAC,
Input-GND: 1500VAC, Output-GND: 700VDC
Minimum Load
Operating Temperature
0° to 40°C Full load Derate linearly to
40% of full rated load at 70°C
0.04% per °C, maximum
Case Material
Black 94V0 Polycarbonate
see mechanical drawing
Temperature Coefficient
Storage Temperature
Relative Humidity
Case Dimensions
-40°C to +85°C
Altitude
-500 to 10,000 ft, operating; -500 to 40,000 ft, non-operating
5% to 95%, non-condensing
EMI/EMC Compliance
Conducted Emissions
Radiated Emissions
FCC Part 15 Subpart B, Class B, EN55011 Class B, EN55024
FCC Part 15 Subpart B, Class B, EN55011 Class B, EN55024
EN61000-3-3 Complies (dmax<6%)
Voltage Fluctuations
Static Discharge Immunity
Radiated RF Immunity
EFT/Burst Immunity
EN61000-4-2, 6kV Contact Discharge, 8kV air discharge. Criteria A
EN61000-4-3, 3V/m. Criteria A
EN61000-4-4, 2kV/5kHz. Criteria A
Line Surge Immunity
EN61000-4-5, 1kV differential, 2kV common-mode, Criteria A
EN61000-4-6, 3Vrms, Criteria A
Conducted RF Immunity
Power Frequency Magnetic Field Immunity
Voltage Dip Immunity
EN61000-4-8, 3A/m, Criteria A
EN61000-4-11, 0 % Vnominal, 0.5 cycle; 40% Vnominal, 5 cycles;
70% Vnominal, 25 cycles: Criteria A
Line Frequency Harmonics
EN61000-3-2, Class A, B, C & D
______________________________________________________________________________________________________________________________ 1 of 2
SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com
MENT1150
Universal Input 150 Watt Series
Medical / ITE Switch-Mode Power Supply
3
Year Warranty
Model Number
Volts (V)
12V
Output Current (max)
Max Watts
140W
Ripple (Vp-p max)
MENT1150A1251F01
MENT1150A1551F01
MENT1150A1851F01
MENT1150A2451F01
MENT1150A2851F01
MENT1150A4851F01
11.67 A
9.33 A
7.78 A
6.25 A
5.35 A
3.12 A
120mV
150mV
180mV
240mV
280mV
480mV
15V
140W
18V
140W
24V
150W
28V
150W
48V
150W
Model Number Key
MENT 1 150 A VV 51 F 01
Model
"01" = Standard. "02" and higher indicates a modified model.
Input Connector:
"F" = IEC320 C14 grounded, Other options available, contact the factory.
Output Connector: "51" = Molex 39-01-3065 or equiv. Other options available, contact the factory.
Output Voltage:
Model
"12" = 12Vdc, "24" = 24Vdc, etc.
"A" = Original Configuration
Output Power:
# of Outputs
Product Family:
"150" = 150 Watts
"1" = Single Output
"M" = Medical, "E" = External, "NT" = Model Series Designator
Input Recept.
#3 Output Connector - 2.5mm barrel type, center (+)
#51 Output Connector - Molex 39-01-2060 or equiv.
IEC320 - C14
Class I
Grounded (F)
Mate = Molex 39-01-2061 or equiv.
Outline Drawing
Connector Pinout
Pin No. Wire AWG & Color Desig.
1
2
3
4
5
6
18AWG RED
18AWG BLUE
+Vout
GND
18AWG GREEN
18AWG WHITE
18AWG YELLOW
18AWG BLACK
GND
+Vout
+Vout
GND
Data Sheet © 2011 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication.
However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.
Rev. 3-28-2011
______________________________________________________________________________________________________________________________ 2 of 2
SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com
相关型号：
©2020 ICPDF网 联系我们和版权申明