MINT2270 [SLPOWER]

Medical – Universal Input Power Supply;
MINT2270
型号: MINT2270
厂家: SL Power Electronics    SL Power Electronics
描述:

Medical – Universal Input Power Supply

文件: 总3页 (文件大小:411K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
MINT2270A  
270W Dual Output Series  
Medical – Universal Input Power Supply  
2 Year Warranty  
270W Convection Cooled AC-DC Power Supply  
Up to 90% Efficiency Typical  
Natural Interleaving Technology for PFC  
LLC Technology for DC Converter  
Remote ON/OFF by PS-ON Signal  
Approved to EN/IEC/UL60601-1 for Medical  
DC-OK, AC-OK Signal Active  
Compliant (LVD, RoHS)  
Specifications  
AC Input  
100-240VAC +/- 10%, 47-63 Hz single phase.  
All Specifications are typical at nominal input, full load at 25°C unless otherwise stated.  
Turn On Time  
Less than 2 seconds under all rated load conditions.  
Input Current  
115VAC: 3.0A max.  
Hold-up Time  
16 ms at 270W, nominal input (120VAC).  
Inrush Current  
The inrush at 264VAC, at a cold start, will not exceed 45A.  
Overvoltage Protection  
See chart for levels, latching type  
Input Fuse  
T6.3A, 250VAC fuse provided on all models.  
Power Factor  
Complies with EN61000-3-2.  
Efficiency  
90% typical.  
Overload Protection  
Hiccup Mode  
Short Circuit Protection  
Hiccup Mode  
Overtemperature Protection  
Provided on all models, auto-recovery.  
Medical Safety Standards  
EN/IEC/UL 60601-1, CSA22.2, No. 60601.1  
Output Power  
270W continuous.  
Ripple and Noise  
1% pk-pk max., 20MHz BW, differential mode. Measured with noise  
probe directly across output terminals.  
Isolation  
Input-Output: 4000VAC, Input-Ground: 1500VAC, Output-Ground:  
707VDC  
Output Voltages  
See chart.  
Earth Leakage Current  
260µA typical at 264Vac, 50Hz.  
Operating Temperature  
0° to 70°C, refer to derating curve.  
Storage Temperature  
Total Regulation  
See chart.  
Minimum Load  
Not required.  
-40 to +85°C.  
Transient Response  
500µs max. for a 50% load step, with 5mSec high load and 5mSec low  
load.  
Relative Humidity  
5% to 95%, non-condensing  
Enclosure Dimensions & Weight  
3.35”W x 7.17”L x 1.17”H. See outline drawing.  
Weight: 550 grams  
MTBF (Mean-Time-Between-Failure):  
325,000 hours at 40°C operating ambient temperature.  
1 of 3  
______________________________________________________________________________________________________________________________  
SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info@slpower.com www.slpower.com  
MINT2270A  
270W Dual Output Series  
Medical – Universal Input Power Supply  
2 Year Warranty  
Output Parameters  
Ripple  
& Noise  
Model  
Number  
Output  
No.  
Output  
Volts (V)  
Output  
Current  
Total  
Regulation  
OCP  
Limit  
OVP  
Limit  
MINT2270A1976E0X  
1
2
5V  
0.2A  
1%  
1%  
5%  
2%  
1.5A  
7.0V  
24V  
11.25A  
15.5A  
30.0V  
Note: “X” in model number as shown above is replaced by a numeral which will signify the remote on/off configuration, or other potential  
modifications. See model number key below.  
Specifications (continued)  
Remote ON/OFF (PS-ON):  
On = logic high, off = logic low or open.  
Model suffix “01” will be in the normally OFF configuration. Model suffix  
“02” will be in the normally “ON” configuration.  
Shock  
Operating:  
Half-sine, 20 gpk, 10 ms, 3 axes, 6 shocks total  
Non-Operating: Half-sine, 40 gpk, 10 ms, 3 axes, 6 shocks total  
AC-OK Signal Vibration  
“High” when input voltage exceeds 68VAC, “Low” when input voltage is less Operating:  
0.003 g2/Hz, 1.5 grms overall, 3 axes, 10 min. / axis  
0.026 g2/Hz, 5.0 grms overall, 3 axes, 1 hr. / axis  
than 68VAC.  
Non-Operating:  
Altitude  
Operating: -500 to 10,000 ft. MSL  
DC-OK Signal  
“High” when the 24V output is within normal range. “Low” upon an  
overvoltage, overcurrent, undervoltage, or short circuit condition, or when  
the PS-ON is disabled (“OFF”).  
Non-Operating: -500 to 40,000 ft. MSL  
EMI/EMC Compliance  
Conducted Emissions  
EN55011 Class B, FCC Part 15, Class B.  
EN61000-4-2, 6kV Contact Discharge, 8kV air discharge  
EN61000-4-3, 10V/m.  
Static Discharge Immunity  
Radiated RF Immunity  
EFT/Burst Immunity  
EN61000-4-4, 2kV/5kHz..  
Line Surge Immunity  
EN61000-4-5, 1kV differential, 2kV common-mode  
EN61000-4-6, 3Vrms  
Conducted RF Immunity  
Power Frequency Magnetic Field Immunity  
Voltage Dip Immunity  
EN61000-4-8, 3A/m  
EN61000-4-11 240VAC, 0%/0.5 cycle, 40%/5cycles, 70%/25  
cycles  
Line Frequency Harmonics  
EN61000-3-2, Class A  
Model Number Key  
MINT 2 270 A 19 76 E 01  
01 = Standard Model, Remote ON/OFF in "OFF" configuration.  
02 = Standard Model, Remote ON/OFF in "ON" configuration.  
03 and higher indicates a modified model.  
Input Connector  
Output Connector  
Output Voltage Configuration, "19" = 5V, 24V outputs  
Model Configuration  
Output Power (Watts)  
# of Outputs  
Product Family: "M" = Medical, "I" = Internal, "NT" = New Technology  
2 of 3  
______________________________________________________________________________________________________________________________  
SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info@slpower.com www.slpower.com  
MINT2270A  
270W Dual Output Series  
Medical – Universal Input Power Supply  
2 Year Warranty  
Outline Drawing & Connector Information  
INPUT, OUTPUT and SIGNAL CONNECTORS:  
CON1 M3 Screw terminals, 7.62mm pitch  
PIN 1) GND  
PIN 2) AC NEUTRAL  
PIN 3) AC LINE  
CON2 M3 Screw terminals, 7.62mm pitch  
PIN 1)  
PIN 2)  
RTN  
RTN  
PIN 3)  
PIN 4)  
24V  
24V  
CON3 Landwin 2502P0600T  
PIN 1)  
PIN 2)  
RTN  
RTN  
PIN 4)  
PIN 5)  
PIN 6)  
DC-OK  
AC-OK  
PS-ON  
PIN 3) 5V SB  
CON4 AMP 640456-2  
PIN 1)  
RTN  
PIN 2) 24V for FAN  
MATING CONNECTORS:  
CON1, 2:  
CON3:  
Wire Lugs - Barrier width = 6.62mm  
Landwin 2500S060, PINS: 2503T012P  
AMP 1375820-2, PINS: 1375913-3  
CON4:  
Output Power Derating Curve  
Data Sheet © 2010 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication.  
However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.  
Rev. 11/2/2010  
3 of 3  
______________________________________________________________________________________________________________________________  
SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info@slpower.com www.slpower.com  

相关型号:

MINT2270A

270W Dual Output Series
SLPOWER

MINT2270A1976E01

AC-DC Regulated Power Supply Module, 270W
SLPOWER

MINT2270A1976E02

AC-DC Regulated Power Supply Module, 270W
SLPOWER

MINT2270A1976E0X

270W Dual Output Series
SLPOWER

MINT3110

110W Triple Output Medical Series
SLPOWER

MINT3110A0508K01

110W Triple Output Medical Series
SLPOWER

MINT3110A1708K01

110W Triple Output Medical Series
SLPOWER

MINT3110A1908K01

110W Triple Output Medical Series
SLPOWER

MIO-2260

Intel® Atom™ N455 Pico-ITX SBC, DDR3, 18-bit LVDS, VGA, 1 GbE, Mini PCIe, 2 USB, 2 COM, MIOe
ADVANTECH

MIO-2260NF-S6A1E

Intel® Atom™ N455 Pico-ITX SBC, DDR3, 18-bit LVDS, VGA, 1 GbE, Mini PCIe, 2 USB, 2 COM, MIOe
ADVANTECH

MIO-2261

Intel® Atom™ N2600/ N2800 Pico-ITX SBC, DDR3, 18/24-bit LVDS, VGA, 1 GbE, Half-size Mini PCIe, 4 USB, 2 COM, SMBus, I2C, mSATA & MIOe
ADVANTECH

MIO-2261N-S6A1E

Intel® Atom™ N2600/ N2800 Pico-ITX SBC, DDR3, 18/24-bit LVDS, VGA, 1 GbE, Half-size Mini PCIe, 4 USB, 2 COM, SMBus, I2C, mSATA & MIOe
ADVANTECH