PW170KB [SLPOWER]

Universal 10 – 15 Watt Series; 通用10 A ???? 15瓦系列
PW170KB
型号: PW170KB
厂家: SL Power Electronics    SL Power Electronics
描述:

Universal 10 – 15 Watt Series
通用10 A ???? 15瓦系列

文件: 总3页 (文件大小:225K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
PW170KB  
Universal 10 – 15 Watt Series  
ITE Switch-Mode Power Supply  
3 Year Warranty  
100-240VAC Universal Input  
Desktop and Wall-Plug Style with either fixed blades, or  
Interchangeable Blades* ( Kit sold separately)  
5V to 48V Single Output Models, up to 15W  
Modified and Custom Designs Available  
Regulated Output with Low Ripple  
Impact-Resistant Polycarbonate Enclosure  
No load Power Consumption < 0.5W  
Meets EISA Requirements (see next page for details).  
Meets Energy Star Level IV  
Specifications  
All Specifications are typical at nominal input, full load at 25°C unless otherwise stated.  
AC Input  
100-240VAC, -/-10% (class I), +6%, -10% (class II), 47-63 Hz, 1.  
MTBF  
>100,000 hours (calculated)  
Input Current  
90VAC: 0.4A  
Hold-up Time  
18 ms min. @ 115VAC  
Overvoltage Protection  
Built-in  
Inrush Current  
Inrush limiting provided.  
Input Fuses  
Internal Primary Current Fuse is provided.  
Overload Protection  
Hiccup Mode  
Efficiency  
Meet EISA Requirements – see page 2  
Short Circuit Protection  
Hiccup Mode  
Output Voltage  
See chart.  
Topology  
Switching – Fixed Frequency Flyback  
Output Power  
See chart  
Approvals and Safety Standards  
EN/IEC/CSA/UL60950-1, EMC: EN55022/55024/61000  
Dielectric Withstand  
Ripple and Noise  
1% pk-pk max., 20MHz BW  
Line & Load Voltage Regulation  
Excluding Cord: Line: +/- 1%, Load: +/-5%.  
Input-Output: 3000VAC, Input-GND: 1500VAC, Output-GND: 500VDC  
Operating Temperature  
0° to 40°C, no derating  
Transient Response  
Storage Temperature  
-30 to +85°C.  
500µs max., 50% load step, typical  
Minimum Load  
Not required.  
Relative Humidity  
5% to 95%, non-condensing  
Case Material:  
Altitude  
0 to 10,000 ft.  
Black 94V0 Polycarbonate  
Case Dimensions:  
See outline drawing.  
Output Connections:  
Cable: 18AWG, 1800mm (5V & 6V models: 1500mm), 2 conductor.  
Connector: 2.5mm barrel type (Ault #3) connector, center contact (+).  
Other connector options are available.  
Model Number Key  
PW170 K B 05 03 F 01  
Modification Designator. "01" is standared part, "02" and higher denotes a modified model.  
Input Receptacle. See Below for options. "F" receptacle (IEC320, C14 type, grounded) noted above.  
Output Connector. "03" connector is standard. Other output connectors available. Contact the factory for more details  
Output Voltage  
Design Revision Changes  
Manufacturing Location  
1 of 3  
Product Family  
______________________________________________________________________________________________________________________________  
SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info@slpower.com www.slpower.com  
PW170KB  
Universal 10-15 Watt Series  
ITE Switch Mode Power Supply  
3 Year Warranty  
Model Number  
PW170KB0503F01  
PW170KB0603F01  
PW170KB0903F01  
PW170KB1203F01  
PW170KB1503F01  
PW170KB1803F01  
PW170KB2403F01  
PW170KB4803F01  
Volts (V)  
5 V  
Output Current (max)  
Max Watts  
10.0 W  
Ripple (Vp-p max)  
50mV  
2.00 A  
1.67 A  
1.50 A  
1.20 A  
1.00 A  
0.84 A  
0.63 A  
0.32 A  
6 V  
12.0 W  
60mV  
9 V  
13.5 W  
90mV  
12 V  
15 V  
18 V  
24 V  
48 V  
15.0 W  
120mV  
15.0 W  
150mV  
15.0 W  
180mV  
15.12 W  
14.88 W  
240mV  
480mV  
Note: Part numbers above include #3 output connector and IEC320 C14 grounded input receptacle. See below for other options.  
Input Receptacle Options  
Output Connector  
DESKTOP OPTIONS  
WALL-PLUG OPTIONS  
IEC320  
C14  
IEC320  
C18  
IEC320  
N. America  
Japan  
N. America  
Japan  
Fixed  
Europe  
United  
Kingdom  
Fixed  
Australia  
C8  
"Shaver"  
(N)  
Grounded Ungrounded  
Interchangeable  
(B)  
Fixed  
(M)  
Fixed  
(H)  
(F)  
(Q)  
(C)  
(G)  
Notes:  
1 Ault #3 Connector  
1. For Desktop options, choose the applicable letter above.  
Notes:  
2. Center Contact = Positive  
3. Connector is Switchcraft 760 plug or equivalent.  
2. For Wall-plug options, choose the applicable letter above. The model will then be fitted only with the  
receptacle chosen. The North American blade version (B) will be an interchangeable blade. The other  
options (C), (M), (G), and (H), will be fixed blades molded in the case.  
4. Suggested Mating Connector is Switchcraft 712A jack or  
equivalent.  
5. Other output connector options are available. Contact your  
local representative for details.  
3. Blade Kit is available which will include one each of a EU, UK, and Aust blade. Kit part number is  
KT1027K . Can be used with (B) version only, to allow blades to be interchanged.  
2007 Energy Independence and Security Act - EISA  
The Energy Independence and Security Act of 2007 was passed in December of 2007 and addresses minimum efficiency standards and standby  
levels for Class A external power supplies that are 250 Watts and under. This law stipulates that external power supplies manufactured on July 1,  
2008 and beyond meet certain minimum efficiency and standby criteria as defined below.  
Minimum Efficiency Criteria:  
Active mode is defined as when a power supply’s input is connected to a line voltage AC and it’s output is connected to a DC or AC load, drawing a  
portion of the product’s power output. Depending upon the power rating for the power supply, it must meet the minimum efficiency criteria outlined  
below.  
Energy-Efficiency Criteria for Active Mode:  
Output Power on Adapter Label  
0 to < 1 Watt  
Minimum Average Efficiency Percentage  
0.50 * output power on the label  
[0.09 * Ln (output power on adapter label)] + 0.50  
0.85  
> 1 watt to 51 watts  
> 51 watts  
Energy Consumption Criteria for No Load Mode:  
The power supply must also meet a requirement for when its input is connected to line voltage AC but its output is not connected to a load.  
Depending upon the power output of the supply, it must keep its energy consumption below the following values:  
Output Power on Adapter Label  
0 to < 250 Watts  
Maximum Power Consumption in No-Load Mode  
0.50 watts  
2 of 3  
______________________________________________________________________________________________________________________________  
SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info@slpower.com www.slpower.com  
PW170KB  
Universal 10-15 Watt Series  
ITE Switch Mode Power Supply  
3 Year Warranty  
Outline Drawings  
Dimensions are in mm  
Desktop Style (Option “F” shown)  
Wallplug Style (Option “B” shown)  
Data Sheet © 2008 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication.  
However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice.  
Rev. 8-10-2009  
3 of 3  
______________________________________________________________________________________________________________________________  
SL Power Electronics Corp 6050 King Drive Ventura, CA 93003 Phone 805.486.4565 Fax 858.712.2040 Email: info@slpower.com www.slpower.com  

相关型号:

PW170KB0503F01

Universal 10 – 15 Watt Series
SLPOWER

PW170KB0603F01

Universal 10 – 15 Watt Series
SLPOWER

PW170KB0903F01

Universal 10 – 15 Watt Series
SLPOWER

PW170KB1203F01

Universal 10 – 15 Watt Series
SLPOWER

PW170KB1503F01

Universal 10 – 15 Watt Series
SLPOWER

PW170KB1803F01

Universal 10 – 15 Watt Series
SLPOWER

PW170KB2403F01

Universal 10 – 15 Watt Series
SLPOWER

PW170KB4803F01

Universal 10 – 15 Watt Series
SLPOWER

PW172KB

Universal 15 – 19 Watt Series
SLPOWER

PW172KB0503F01

Universal 15 – 19 Watt Series
SLPOWER

PW172KB0603F01

Universal 15 – 19 Watt Series
SLPOWER

PW172KB0903F01

Universal 15 – 19 Watt Series
SLPOWER