SC-12-21CG [SLPOWER]
Power Supply Module;
| 型号： | SC-12-21CG |
| 厂家： | 
SL Power Electronics |
| 描述： | Power Supply Module |
| 文件： | 总2页 (文件大小：85K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
1 0 0 , 1 5 0 , 1 6 5 , 1 8 0 , 2 5 0 , 3 5 0 ,
3 6 0 , 5 0 0 , 5 2 0 WATTS
S INGLE OUTP UT
SC-100 SC-350
SC-150 SC-360
SC-165 SC-500
SC-180 SC-520
SC-250
Featuring:
• Output voltages from 3.3 V to 48 V
• Power density to 3.6 watts/in3
• Meets international safety agency
requirements
• Remote sense, thermal protection,
and OVP
• Cannot be damaged by no load or
low line conditions
• AC automatic line selection option
• System air or self cooling options
• Available in 48 Vdc input
STANDARD SC SERIES
150 WATTS 9” x 5” x 2.5” L FRAME 250 WATTS 9” x 5” x 2.5”
MODEL OUTPUT RATING
PWR OUT
MODEL
OUTPUT RATING
PWR OUT
SC-3.3-30
SC-5-30
3.3V @ 30A
5V @ 30A
100
150
180
180
180
180
180
SC-3.3-50
SC-5-50
SC-12-21
SC-15-17
SC-24-11
SC-28-9
3.3V @ 50A
5V @ 50A
12V @ 21A
15V @ 17A
24V @ 11A
28V @ 9A
48V @ 5.5A
165
250
250
250
250
250
250
Option C
SC-12-15
SC-15-12
SC-24-7.5
SC-28-6.5
SC-48-3.7
12V @ 15A
15V @ 12A
24V @ 7.5A
28V @ 6.5A
48V @ 3.7A
SC-48-5.5
350 WATTS 11.5” x 5” x 2.5”
500 WATTS 11.5” x 5” x 2.5”
MODEL
OUTPUT RATING
PWR OUT
MODEL OUTPUT RATING
PWR OUT
SC-5-100
SC-12-42
SC-15-34
SC-24-21
SC-28-18
SC-48-11
5V @ 100A
12V @ 42A
15V @ 34A
24V @ 21A
28V @ 18A
48V @ 11A
500
500
500
500
500
520
SC-5-70
SC-12-30
SC-15-24
SC-24-15
SC-28-13
SC-48-8
5V@ 70A
12V@ 30A
15V@ 24A
24V@ 15A
28V@ 13A
48V@ 8A
350
360
360
360
360
360
Option F
withstand the harsh environments that
typify industrial control applications. They
also incorporate the sophistication and
advance design features needed to
power computer and telecommunications
systems.
Check out the specifications of this
series, your single choice for single output
switchers.
Consider this series of single output
switching power supplies for the design
of your high end OEM products ranging
from process controls to sophisticated
telecommunications systems.
Incorporating Condor design features
such as surface mount components and
single PCB construction for high reliability,
these switchers are rugged enough to
Condor D.C. Power Supplies, Inc., A subsidiary of SL Industries, Inc. 805-486-4565 • (800) 235-5929 Fax: (805) 487-8911 http://www.condorpower.com
1 0 0 , 1 5 0 , 1 6 5 , 1 8 0 , 2 5 0 WATTS 3 5 0 , 3 6 0 , 5 0 0 , 5 2 0 WATTS
9 ” x 5 ” x 2 .5 ”
S C -1 0 0 ,1 5 0 , 1 8 0 , 2 5 0
1 1 .5 ” x 5 ” x 2 .5 ”
S C -3 5 0 , 3 6 0 , 5 0 0 , 5 2 0
SC-100, 150, 165, 180, 250
SC-350, 360, 500, 520
2.0 lbs - 0.9 kgs
3.8 lbs - 1.7 kgs
Dimensions:
Inches
Millimeters
SPECIFICATIONS: ALL MODELS
INPUT
Option “G”, DC Power Good ( 5 V outputs)*: Provides a TTL “1” open collector when output
is above 4.6 V nominal. Not available if option “P” is selected.
Option “P”, AC Power Fail: Provides TTL “0” 5 ms before output voltage goes out of
regulation band upon loss of AC power. VMEbus compatible, provides 48 mA sink
current capability. Not available if option “G” is selected.
AC Input: 90-132 Vac/180-264 Vac, 47 to 63 Hz. User selectable. See option “A” for automatic
line selection. 150 watt units fused for 7 A. 250 watt units fused for 10 A. 350 and 500
watt units fused for 15 A.
Inrush: Cold start AC current is less than 16 A at 115 Vac and 32 A at 230 Vac for 150 watt
models; 10 A at 115 Vac and 18 A at 230 Vac for 250 watt models; 80 A at 115 Vac and
20 A at 230 Vac for 350 and 500 watt models. Limited by thermistor.
Holdup Time: 16 ms minimum after removal of power, at nominal line, full load.
Efficiency: 80% typical.
Option “V”, Fan/Cover Assembly*: Low profile, end venting cover with integral ball-bearing
fan.
*Options C, F, G, and V not available on 150 and 180 watt models.
Consult factory for other available options.
Brownout Protection: Holds regulation to 85 Vac or 170 Vac.
OUTPUT
Adjustability: User adjustable ±10% minimum.
Line & Load Reg: ±1% over AC input range and 0 to 100% load change.
Ripple & Noise: Less than 1% p-p or 100 mV, whichever is greater.
Remote Sense: Compensates for 250 mV total line drop. Open sense lead protection.
Temperature Coefficient: 0.02% per degree C.
Stability: 0.1% over 8 hours after 30 minutes warm-up.
Transient Response: Output voltage returns to within 1% in less than 500 µs for a 50% load
change. Peak transient does not exceed 5%.
Overload Protection: All outputs are protected against overload and short circuit. Automatic
recovery upon removal of fault.
Overvoltage Protection: Protects load against power supply induced overvoltage. Trip point is
factory set so that output voltage cannot exceed 136% of nominal.
Remote Inhibit: Contact closure to the negative sense line drops output power to nominal
zero. Not available in 150 or 180 watt units.
AC INPUT
FUNCTION
Input Select
115 VAC
230 VAC
CONNECTOR
Short
Line
Open
0.110,0.187, or 0.250
male Fastons
TB1-(L)
TB1-(N)
Line 1
Line 2
Barrier strip
#6-32 screws
3/8” centers
Neutral
TB1-(
)
Safety Ground
Safety Ground
DC OUTPUT
FUNCTION
MODEL
LOCATION
Terminal +5V
Terminal COM
Terminal +V
CONNECTOR
All SC-150W models
Bus bars
#6-32 screws
Reverse Voltage: Protected against reverse voltage up to supply current rating.
ENVIRONMENTAL
Output
Voltage
All SC-250W models
Bus bars
#8-32 screws
Thermal Protection: Shuts down power supply if overheated. Automatic recovery.
Temperature Range: 0° to 50°C at full ratings. Derate to half power at 70 °C.
Safety Agencies: Most models are approved to UL1950; CSA 22.2 #234; IEC 950 and TÜV
EN60950, Class 1 SELV., CE 72/23/EEC/93/68EEC (low voltage directive).
Conducted RFI: Meets FCC Part 15, Subpart J, Class A; EN55022 Class B; CISPR 22 Class B.
Output Isolation: Isolated from ground 50 Vdc, except 100 Vdc for 48 Vdc models.
Cooling: 30 CFM required to achieve full ratings.
Terminal COM
All SC-350W and 500W Terminal +V
Bus bars
#1/4-20 screws
models
Terminal COM
STATUS AND CONTROL
FUNCTION SC-150W CONNECTOR SC-250W SC-350 & 500W
CONNECTOR
OPTIONS:
Remote Sense
+S
–S
PF
#6-32 screw J1-1 (+S)
J1-4 (+S)
J1-3 (–S)
J1-2 (PF)
AMP MTA type
640456-4
pin header
(locking)
terminals
J1-2 (–S)
Option “A”, AC Auto-Range: Automatically selects proper AC line voltage range to enable
power operation at either 115 or 230 Vac without user intervention.
Option “C”, Cover*: Limits contact with power supply interior.
Option “F”, Fan/Cover Assembly*: Cover with integral ball-bearing fan provides proper
cooling to achieve full ratings at 50°C ambient temperature.
AC Power Fail
DC Power Good
Inhibit
J1-3 (PF)
J1-4 (IH)
J1-1 (INH)
Condor D.C. Power Supplies, Inc., A subsidiary of SL Industries, Inc. 805-486-4565 • (800) 235-5929 Fax: (805) 487-8911 http://www.condorpower.com
相关型号：
©2020 ICPDF网 联系我们和版权申明