ESD0603E002M24 [SOCAY]
Surface Mount Polymer ESD Suppressors;型号: | ESD0603E002M24 |
厂家: | Socay Electornics Co., Ltd. |
描述: | Surface Mount Polymer ESD Suppressors |
文件: | 总4页 (文件大小:184K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Surface Mount Polymer ESD Suppressors
Low Capacitance
ESD0402E - ESD0603E
Description
This specification is applied to electrostatic discharge (ESD)
protection. It is designed to protect the high-speed data lines
against ESD transients. It has very low capacitance and fast
turn on times makes it ideal for data and transmission lines
with high data rates. According to the special property of
device, we recommend not to use on such application as
DC/AC power line.
Features
u
u
RoHS compliant, lead-free and available halogen-free
Protection against ESD voltages and currents (IEC
61000-4-2 Level 4)
Equivalent Circuits
u
Extremely quick response time (<1 ns) present ideal
ESD protection
u
u
u
u
u
Extremely low capacitance
Extremely low leakage current
Bi-directional device
Surface mount device
Zero signal distortion
Product Model
Applicable
u
u
u
u
u
Antenna circuit
USB2.0 / USB3.0
IEEE-1394
DVI
u
Digital Video Equipment
Mobil Phone
GPS Antenna
u
u
u
Bluetooth Communication Equipment
HDMI
Electrical Characteristics
Leakage
Peak
Trigger Clamping Capacitance
ESD Voltage Capability
ESD
Pulse
Rated
Voltage
VDC
Response
Time
Current Voltage Voltage Voltage
CP
Contact
Contact
IL
VP
VT
VC
@1MHz
(pF)
Withstand
(Pulses)
Part Number
Discharge Discharge
(ns)
(V)
(μA)
(V)
(V)
(V)
(KV)
(KV)
Max.
5
Typical
0.01
0.01
0.01
0.01
0.01
Typical
300
Typical
300
Typical Typical Max.
Max.
Typical
Typical
Typical
1000
1000
1000
1000
1000
ESD0402E002M05
ESD0402E002M12
ESD0603E002M05
ESD0603E002M12
ESD0603E002M24
30
30
30
30
30
0.2
0.2
0.2
0.2
0.2
0.5
0.5
0.5
0.5
0.5
1
1
1
1
1
8
8
8
8
8
15
15
15
15
15
12
5
300
300
300
300
12
24
300
300
300
250
VP - The Peak voltage value shall be measured under the following conditions. ESD test conditions:IEC61000-4-2, 8KV contact discharge
VT - Measurement by using Transmission Line Pulse (TLP)
VC - Measurement by using Transmission Line Pulse (TLP)
CP - Device Capacitance measured with 1Vrms
SOCAY Electronics Co., Ltd.
www.socay.com
@SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.
Revision November 28, 2013
1 / 4
Surface Mount Polymer ESD Suppressors
Low Capacitance
ESD0402E - ESD0603E
Explanation of Part Number
ESD
0402
E
002
M
05
(1)
(2)
(3)
(4) (5) (6)
(1) Series Type: ESD Guard TM Series
(2) Chip Size (EIA): 0402 / 0603
(3) Series Type: EMI / ESD Protection
(4) Capacitance: Value - Exxx, E002=0.2pF
(5) Capacitance Tolerance: N - ±30%, M - ±20%
(6) Rated Voltage, VDC
Construction & Dimensions
Unit: mm
Substrate
Ceramic (Alumina)
Symbol
0201
0402
0603
Encapsulate
End termination
Polymer
L
W
H
B
A
C
D
0.63±0.05
0.30±0.03
0.23±0.05
0.165±0.05
0.35±0.05
0.35±0.05
0.35±0.05
1.00±0.10
0.50±0.10
0.34±0.10
0.20±0.15
0.50±0.10
0.50±0.10
0.50±0.10
1.60±0.1
0.85±0.15
0.51±0.05
0.30±0.20
0.75±0.10
0.75±0.10
0.75±0.10
Ag / Ni / Sn
Recommended pad outline
SOCAY Electronics Co., Ltd.
www.socay.com
@SOCAY Electronics Co., Ltd. 2013
Revision November 28, 2013
2 / 4
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.
Surface Mount Polymer ESD Suppressors
Low Capacitance
ESD0402E - ESD0603E
Temperature Specifications
Environmental Specifications
Item
Bias
Specifications
Test Condition
Reference
Parameter
Value
Unit
°C
Operating Temperature
Storage Temperature
-55 to +125
--55 to +125
90%RH, 40°C ,Rated
MIL-STD-202
Method 103
IL≤ 10μA
Humidity
Voltage, 1000hrs
°C
Storage Temperature
5 to 40
<65
°C
Thermal
Shock
-40°C to +85°C,30 min. JIS C0025
IL≤ 10μA
IL≤ 10μA
IL≤ 10μA
Taping Package
cycle, 5 cycles
(1998)Test Na
Relative Humidity
Storage Time
%RH
Month
Storage Condition
12 Max
High
Rated Voltage, 85°C,
MIL-STD-202G
Method 108
Temperature
1000hrs
Solder leach
Resistance
MIL-STD-202G
Method 210F
260°C, 10s
IL - Leakage current at rated voltage, the maximum leakage current was
measured after reliability test.
Construction & Dimensions
Unit: mm
Reflow Condition
Pb free assembly
+150°C
TP
Critical Zone
TL to TP
Ramp-up
-Temperature Min (Ts(min)
)
-Temperature Max (Ts(max)
-Time (min to max) (TS)
TL
Pre Heat
)
+200°C
TS(max)
Ramp-down
60 -180 Seconds
TS(min)
Average ramp up rate ( Liquidus Temp TL)
to peak
3°C/Second Max
Preheat
TS(max) to TL - Ramp-up Rate
3°C/Second Max
+217°C
25
Time to peak temperature
Time
(t 25℃ to peak)
- Temperature (TL) (Liquidus)
Reflow
- Time (min to max) (TL)
60 -150 Seconds
Precaution for soldering
Note that this product will be easily damaged by rapid heating,
rapid cooling or local heating.
Do not give heat shock over 100°C in the process of soldering.
We recommend to take preheating and gradual cooling
Peak Temperature (TP)
260 +0/-5°C
Time within 5°C of actual peak
Temperature (TP)
20-40 Seconds
Ramp-down Rate
6°C/Second Max
Soldering gun procedure
Note the follows, in case of using solder gun for replacement.
1) The tip temperature must be less than 280 for the period
within 3 seconds by using soldering gun under 30W
2) The soldering gun tip shall not touch this product directly.
Time 25°C to peak Temperature (TP)
8 minutes Max
Soldering volume
Note that excess of soldering volume will easily get crack the
body of this product.
SOCAY Electronics Co., Ltd.
www.socay.com
@SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.
Revision November 28, 2013
3 / 4
Surface Mount Polymer ESD Suppressors
Low Capacitance
ESD0402E - ESD0603E
Packaging Information
Carrier Tape Dimensions Unit: mm
Symbol
A
0201
0402
0603
8.00±0.30
8.00±0.30
8.00±0.30
B
C
D
E
F
3.50±0.05
1.75±0.10
2.00±0.05
4.00±0.10
1.50±0.10
0.71±0.02
0.39±0.03
0.42±0.03
3.50±0.05
1.75±0.10
2.00±0.05
4.00±0.10
1.50±0.10
1.19±0.05
0.69±0.05
0.48±0.03
3.50±0.05
1.75±0.10
4.00±0.05
4.00±0.10
1.50±0.10
2.02±0.20
1.27±0.15
0.60±0.03
L
Packaging method
W
T
- Products shall be heat-sealed in the chip pocket, spacing
pitch 2-mm of paper carrier tape with cover tape, and carrier
tape shall be reeled to the reel.
- Tape material to be paper.
- Cover Tape adhesion to be 40±15 grams.
Taping Reel Dimensions
Taping Specifications
Unit: mm
There Shall be the portion having no product in
both the head and the end of taping, and there
shall be the cover tape in the heat of taping.
Quantity of products in the taping package
0402
0603
10000PCS / Reel
5000PCS / Reel
Standard Quantity
Shipping quantity is a multiple of standard quantity
SOCAY Electronics Co., Ltd.
www.socay.com
@SOCAY Electronics Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.socay.com for current information.
Revision November 28, 2013
4 / 4
相关型号:
©2020 ICPDF网 联系我们和版权申明