B-13/15-155-T-SFC-7 [SOURCE]
Transceiver, 1260nm Min, 1360nm Max, 155Mbps(Tx), 155Mbps(Rx), FC Connector, Through Hole Mount;
| 型号： | B-13/15-155-T-SFC-7 |
| 厂家： | 
SOURCE PHOTONICS, INC. |
| 描述： | Transceiver, 1260nm Min, 1360nm Max, 155Mbps(Tx), 155Mbps(Rx), FC Connector, Through Hole Mount |
| 文件： | 总8页 (文件大小：632K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
155 Mbps Bi-directional Receptacle
Single Fiber Transceiver
B-13/15-155(C)-T(3)-Sxx5(7)
Features
• Diplexer Single Mode Single Fiber 1x9 SC/SF/ST Receptacle
Connector
• Wavelength Tx 1310nm/Rx 1530 nm
• SONET OC-3 SDH STM-1 Compliant
• Single +5V Power Supply [B-13/15-155-T-Sxx5(7)]
• Single +3.3V Power Supply [B-13/15-155-T3-Sxx5(7)]
• PECL/LVPECL Differential Inputs and Outputs
[B-13/15-155-T(3)-Sxx5(7)]
• TTL/LVTTL Differential Inputs and Outputs
[B-13/15-155C-T(3)-Sxx5(7)]
• Wave Solderable and Aqueous Washable
• LED Multisourced 1x9 transceiver interchangeable
• Class 1 Laser Int. Safety Standard IEC 825 Compliant
• Uncooled Laser diode with MQW structure
• Complies with Telcordia(Bellcore) GR-468-CORE
• RoHS compliance available
Absolute Maximum Rating
Parameter
Symbol
Vcc
Min.
Max.
6
Unit
V
Note
Power Supply Voltage
Power Supply Voltage
Output Current
0
0
B-13/15-155-T-Sxx5(7)
B-13/15-155-T3-Sxx5(7)
Vcc
3.6
30
V
Iout
-
mA
ºC
ºC
Soldering Temperature
Storage Temperature
-
260
85
10 seconds on leads only
-
Tstg
-40
Recommended Operating Condition
Parameter
Symbol
Min.
4.75
3.1
0
Typ.
5
Max.
5.25
3.5
70
Unit
V
Power Supply Voltage
Power Supply Voltage
Operating Temperature (Case)
Operating Temperature (Case)
Data Rate
Vcc
Vcc
Topr
Topr
-
3.3
-
V
ºC
0
-
70
ºC
-
155
-
Mbps
Transmitter Specifications
Parameter
Symbol
Min
Typical
Max
Unit
Notes
Optical
Output power is coupled into a 9/125 µm single
mode fiber (B-13/15-155-T(3)-Sxx5)
Po
Po
-5
-3
-
-
0
dBm
dBm
Optical Transmit Power
Optical Transmit Power
Output power is coupled into a 9/125 µm single
mode fiber (B-13/15-155-T(3)-Sxx7)
+2
Output center Wavelength
Output Spectrumt Width
Extinction Ratio
λ
1260
-
1310
1360
nm
nm
dB
∆λ
ER
-
-
3
-
RMS (σ)
10
Output Eye
Compliant with ITU-T recommendation G.957/STM-1
Optical Rise Time
Optical Fall Time
tr
tf
-
-
-
-
2
2
ns
ns
10% to 90% Values
10% to 90% Values
Isolation potential between 1480-1580nm at
least 30dB
-
Optical Isolation
Relative Intensity Noise
Total Jitter
30
-
-
-
-
-
dB
dB/Hz
ns
RIN
TJ
-116
1.2
Measured with 223-1 PRBS with 72 ones and 72
zeros.
-
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
LUMINENTOIC.COM
LUMNDS617-Apr0908
Rev A.4
1
155 Mbps Bi-directional Receptacle
Single Fiber Transceiver
B-13/15-155(C)-T(3)-Sxx5(7)
Transmitter Specifications
Parameter
Symbol
Min
Typical
Max
Unit
Notes
Electrical
Maximum current is specified at Vcc=
Maximum @ maximum temperature
ICC
IIL
-
-
200
mA
Power Supply Current
Data Input Current-Low
Data Input Current-High
Differential Input Voltage
Data Input Voltage-Low
Data Input Voltage-High
-350
-
-
-
-
-
-
-
µA
µA
mV
V
I
350
-
IH
VIH-VIL
VIL-VCC
VIH-VCC
300
-2.0
-1.1
-1.58
-0.74
These inputs are compatible with 10K, 10KH
and 100K ECL and PECL inputs
V
Receiver Specifications
Parameter
Symbol
Min
Typical
Max
Unit
Notes
Optical
23
-10
,
Measured with 2 -1 PRBS, BER = 10
Sensitivity
-
-
-
-33
dBm
B-13/15-155-T(3)-SSC5
Measured with 223-1 PRBS, BER = 10-10
B-13/15-155-T(3)-SSC7
,
Sensitivity
-
-
-
-
-35
-
dBm
dBm
Maximum Input Power
Pin
-3
MEasured on transition : low to high
B-13/15-155-T(3)-SSC5
Signal Detect-Asserted (Note 1)
Signal Detect-Asserted (Note 1)
Signal Detect-Deasserted (Note 1)
Pa
Pa
Pd
-
-
-
-
-
-33
-35
-
dBm
dBm
dBm
MEasured on transition : low to high
B-13/15-155-T(3)-SSC7
Measured on transition: high to low
B-13/15-155-T(3)-SSC5
-45
Signal Detect-Hysteresis
Wavelength of Operation
1.0
-
-
4.0
dB
1480
1600
nm
Note 1: Regardless of whether the Tx is on or not, SD should be asserted at less than -33 or -35 dBm of input power level and deasserted at
higher than -45 dBm of input power level from the outside Tx.
Receiver Specifications
Parameter
Symbol
Min
Typical
Max
Unit
Note
Electrical
ICC
-
-
-
-
-
-
100
mA
V
The current excludes the output load current
Power Supply Current
Data Output Voltage-Low
VOL -Vcc
-2.0
-1.1
-2.0
-1.1
-1.58
-0.74
-1.58
-0.74
Data Output Voltage-High
VOH-
V
Vcc
VSDL-Vcc
Vcc
These outputs are compatible with 10K,
10KH and 100KECL and PECL outputs
Signal Detect Output Voltage-Low
Signal Detect Output Voltage-High
V
V
VSDH-
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
LUMINENTOIC.COM
LUMNDS617-Apr0908
Rev A.4
2
155 Mbps Bi-directional Receptacle
Single Fiber Transceiver
B-13/15-155(C)-T(3)-Sxx5(7)
Connection Diagram
Receiver Signal Ground
Receiver Data Out
Receiver Data Out Bar
Signal Detect
Receiver Power Supply
Transmitter Power Supply
Transmitter Data In Bar
Transmitter Data in
1. (Rx GND)
2. (Rx +)
3. (Rx-)
NC
4. (SD)
5. (Rx Vcc)
6. (Tx Vcc)
7. (Tx-)
8. (Tx+)
9. (Tx GND)
Top View
NC
Transmitter Signal Ground
PIN
Symbol
RxGND
RD+
Notes
Directly connect this pin to the receiver ground plane
1
2
3
4
5
6
7
See recommended circuit schematic
RD-
See recommended circuit schematic
SD
Active high on this indicates a received optical signal
DC power for the receiver section
RxVcc
TxVcc
TD-
DC power for the transmitter section
See recommended circuit schematic
8
TD+
See recommended circuit schematic
9
TxGND
Directly connect this pin to the transmitter ground plane
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
LUMINENTOIC.COM
LUMNDS617-Apr0908
Rev A.4
3
155 Mbps Bi-directional Receptacle
Single Fiber Transceiver
B-13/15-155(C)-T(3)-Sxx5(7)
Recommended Circuit Schematic (3.3V/5V)
B-13/15-155-T(3)-Sxx5(7)
Tx Vcc
Rx Vcc
9
8
7
6 5 4 3
2
1
C6
C5
R1 R3
R9
R5 R7
RD +
RD -
SD
TD +
TD -
Tx Vcc
Rx Vcc
R2 R4
R10 R6 R8
No internal
connection
No internal
connection
Transceiver
Top view
L1
Rx Vcc
Tx Vcc
C3
L2
C1
C2
Notes +3.3V:
Notes +5V:
Vcc
R1=R3=R5=R7=R9=130
R2=R4=R6=R8=R10=82
C1=C2=C3=C5=C6=0.1F
C4=10F
R1=R3=R5=R7=R9=82
R2=R4=R6=R8=R10=130
C1=C2=C3=C5=C6=0.1F
C4=10F
C4
L1=L2=1H
L1=L2=1H
Recommended Circuit Schematic (3.3V/5V)
B-13/15-155C-T(3)-Sxx5(7)
Tx Vcc
Rx Vcc
9
8
7
6 5 4 3
2
1
C6
C5
R1
R3
R5 R7
RD +
RD -
SD
TD +
TD -
Tx Vcc
Rx Vcc
R6
R8
R2
R4
No internal
connection
No internal
connection
Transceiver
Top view
L1
Rx Vcc
Tx Vcc
C3
L2
C1
Notes +3.3V:
Notes +5V:
Vcc
R1=R3=R5=R7=130
R2=R4=R6=R8=82
C1=C2=C3=C5=C6=0.1F
C4=10F
R1=R3=R5=R7=82
R2=R4=R6=R8=130
C1=C2=C3=C5=C6=0.1F
C4=10F
C4
C2
L1=L2=1H
L1=L2=1H
The split-loaded terminations for ECL signals need to be located at the input of devices receiving those ECL signals.
The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc.
A GND plane under the module is required for good EMI and sensitivity performance.
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
LUMINENTOIC.COM
LUMNDS617-Apr0908
Rev A.4
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
4
155 Mbps Bi-directional Receptacle
Single Fiber Transceiver
B-13/15-155(C)-T(3)-Sxx5(7)
Package Diagram
B-13/15-155-T(3)-SSC5(7)
Units in mm
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
LUMINENTOIC.COM
LUMNDS617-Apr0908
Rev A.4
5
155 Mbps Bi-directional Receptacle
Single Fiber Transceiver
B-13/15-155(C)-T(3)-Sxx5(7)
Package Diagram
B-13/15-155-T(3)-SFC5(7)
Top View
Front View
Package Diagram
B-13/15-155-T(3)-SST5(7)
Top View
Front View
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
LUMINENTOIC.COM
LUMNDS617-Apr0908
Rev A.4
6
155 Mbps Bi-directional Receptacle
Single Fiber Transceiver
B-13/15-155(C)-T(3)-Sxx5(7)
Ordering Information
Available Options:
B-13/15-155(C)-T-SSC5(7)(A)
B-13/15-155(C)-T-SFC5(7)(A)
B-13/15-155(C)-T-SST5(7)(A)
B-13/15-155(C)-T-SSC5(7)(A)-G5
B-13/15-155(C)-T-SFC5(7)(A)-G5
B-13/15-155(C)-T-SST5(7)(A)-G5
B-13/15-155(C)-T3-SSC5(7)(A) B-13/15-155(C)-T3-SSC5(7)(A)-G5
B-13/15-155(C)-T3-SFC5(7)(A) B-13/15-155(C)-T3-SFC5(7)(A)-G5
B-13/15-155(C)-T3-SST5(7)(A) B-13/15-155(C)-T3-SST5(7)(A)-G5
Part Numbering Definitions:
B - 15/13 - 155 - T(3) - S xx Tx Power Temperature and Package -RoHS
• Wavelength
Tx Wavelength=1530nm
Rx Wavelength=1310nm
• Communication protocol
(155 Mbps)
• T = +5V Transceiver
• T3 = +3.3V Transceiver
• Single mode fiber
• Connector options
SC/ST/FC
• Tx Power
5 = -5 to 0 dBm
7 = -3 to +2 dBm
• Temperature range and package
Blank = commercial temperature(0 to 70 ºC)
A = industrial temperature(-40 to 85 ºC)
• RoHS
Blank = RoHS non-compliant product
G5 = RoHS 5/6-compliant product (lead exemption)
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
LUMINENTOIC.COM
LUMNDS617-Apr0908
Rev A.4
7
155 Mbps Bi-directional Receptacle
Single Fiber Transceiver
B-13/15-155(C)-T(3)-Sxx5(7)
Warnings
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow
guidelines according to proper ESD procedures.
Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.
Legal Noice
IMPORTANT NOTICE!
All information contained in this document is subject to change without notice, at LuminentOIC’s sole and absolute discretion. LuminentOIC warrants performance
of its products to current specifications only in accordance with the company’s standard one-year warranty; however, specifications designated as “preliminary” are
given to describe components only, and LuminentOIC expressly disclaims any and all warranties for said products, including express, implied, and statutory warran-
ties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the company’s Terms and Conditions of
Sale for further warranty information.
LuminentOIC assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual
property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and LuminentOIC makes
no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this docu-
ment are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. LuminentOIC customers
using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify LuminentOIC for any damages resulting from
such use or sale.
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer agrees that LuminentOIC is not liable for any
actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact
LuminentOIC to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current.
© LuminentOIC, Inc. 2003
All rights reserved
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
LUMINENTOIC.COM
LUMNDS617-Apr0908
Rev A.4
8
相关型号：
B-13/15-155-T-SFC-7A-G5
Transceiver, 1260nm Min, 1360nm Max, 155Mbps(Tx), 155Mbps(Rx), FC Connector, Through Hole Mount
SOURCE
©2020 ICPDF网 联系我们和版权申明