C-13-155-T-SSC7B-G5 [SOURCE]
155 Mbps Single Mode Transceiver; 155 Mbps的单模收发器型号: | C-13-155-T-SSC7B-G5 |
厂家: | SOURCE PHOTONICS, INC. |
描述: | 155 Mbps Single Mode Transceiver |
文件: | 总7页 (文件大小:1100K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
155 Mbps Single Mode Transceiver
C-13-155(C)-T3-SXX3(5)
Features
• Duplex SC Single Mode Transceiver
• Industry Standard 1x9 Footprint
• Intermediate Reach SONET OC-3 SDH STM-1 Compliant
• Single 3.3V Power Supply
• LVPECL Differential Inputs and Outputs
• Wave Solderable and Aqueous Washable
• LED Multisourced 1x9 Transceiver Interchangeable
• Class 1 Laser Int. Safety Standard IEC 825 Compliant
• Uncooled Laser Diode with MQW Structure
• Complies with Telcordia (Bellcore) GR-468-CORE
• Temperature Range: 0 to 70ºC
• C-13-155(C)-T3-SSC3(5) black case 10.4 mm
• SD LVPECL level C-13-155-T3-SXX3(5)
• SD LVTTL level C-13-155C-T3-SXX3(5)
• ATM 155 Mbps Links Application
• SONET/SDH Equipment Interconnect Application
Absolute Maximum Rating
Parameter
Symbol
Vcc
Min.
Max.
3.6
30
Unit
V
Note
Power Supply Voltage
Output Current
0
0
Iout
mA
ºC
Soldering Temperature
Operating Temperature
Storage Temperature
-
-
260
70
10 seconds on leads only
Topr
Tstg
0
ºC
-40
85
ºC
Recommended Operating Condition
Parameter
Symbol
Vcc
Min.
3.1
0
Typ.
3.3
-
Max.
3.5
70
Unit
V
Power Supply Voltage
Operating Temperature
Data Rate
Topr
ºC
-
155
-
Mbps
Transmitter Specifications, (0<Topr<70ºC, 3.1V<VCC<3.5V)
Parameter
Optical
Symbol
Min
Typical
Max
Unit
Notes
C-13-155(C)-T3-SXX3, output power is coupled
into a 9/125 µm single mode fiber
Po
Po
-15
-5
-
-
-8
0
dBm
dBm
Optical Transmit Power
Optical Transmit Power
C-13-155(C)-T3-SXX5, output power is coupled
into a 9/125 µm single mode fiber
λ
Output Center Wavelength
Output Center Wavelength
Output Spectrum Width
Output Spectrum Width
Extinction Ratio
1261
1263
-
1310
1310
-
1360
nm
nm
nm
nm
dB
C-13-155(C)-T3-SXX3
λ
1360
C-13-155(C)-T3-SXX5
Δλ
Δλ
ER
ER
7.7
RMS(σ), C-13-155(C)-T3-SXX3
RMS(σ), C-13-155(C)-T3-SXX5
C-13-155(C)-T3-SXX3
5
-
8.2
10
-
-
Extinction Ratio
-
dB
C-13-155(C)-T3-SXX5
Output Pulse Mask
Output Eye
Compliant with FDDI SMF-PMD1
Compliant with ITU-T recommendation G.957
Optical Rise Time
tr
tf
-
-
-
-
-
-
2
2
ns
ns
10% to 90% Values
10% to 90% Values
Optical Fall Time
Relative Intensity Noise
RIN
-116
dB/Hz
Measured with 223-1 PRBS with 72 ones and 72
zeros.
Total Jitter
TJt
-
-
1.2
ns
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
LUMINENTOIC.COM
LUMNDS272-JAN2904
rev. 0
1
155 Mbps Single Mode Transceiver
C-13-155(C)-T3-SXX3(5)
Transmitter Specifications, (0<Topr<70ºC, 3.1V<VCC<3.5V)
Parameter
Electrical
Symbol
Min
Typical
Max
Unit
Notes
Maximum current is specified at Vcc= Maximum @
maximum temperature
ICC
IIL
-
-
160
mA
Power Supply Current
Data Input Current-Low
Data Input Current-High
Differential Input Voltage
Data Input Voltage-Low
-350
-
-
-
-
-
-
350
-
µA
µA
mV
V
I
IH
V -VIL
IH
300
-2.0
VIL-VCC
-1.58
These inputs are compatible with 10K, 10KH and
100K ECL and PECL inputs
Data Input Voltage-High
VIH-VCC
-1.1
-
-0.74
V
Receiver Specifications, (0<Topr<70ºC, 3.1V<VCC<3.5V)
Parameter
Optical
Symbol
Min
Typical
Max
Unit
Notes
measured with 223-1 PRBS with 72 ones
and 72 zeros. C-13-155-T3-SXX3
measured with 223-1 PRBS with 72 ones
and 72 zeros. C-13-155(C)-T3-SXX5
Sensitivity
Sensitivity
-
-
-
-
-
-
-34
-35
dBm
dBm
Maximum Input Power
Maximum Input Power
Pin
Pin
-7
0
-
-
-
-
dBm
dBm
C-13-155(C)-T3-SXX3
C-13-155(C)-T3-SXX5
C-13-155(C)-T3-SXX3, Measured on
transition: low to high
Signal Detect-Asserted
Signal Detect-Asserted
Signal Detect-Deasserted
Pa
Pa
Pd
-
-
-
-
-
-34
-35
-
dBm
dBm
dBm
C-13-155(C)-T3-SXX5, Measured on
transition: low to high
C-13-155-T3-SXX3(5)
-47
Measured on transition: high to low
Signal Detect-Hysteresis
Wavelength of Operation
1.0
-
-
4.0
dB
1100
1600
nm
Receiver Specifications, (0<Topr<70ºC, 3.1V<VCC<3.5V)
Parameter
Symbol
Min
Typical
Max
Unit
Notes
Electrical
ICC
-
-
-
-
-
-
-
-
100
-1.58
-0.74
-1.58
-0.74
0.5
mA
V
The current excludes the output load current
Power Supply Current
Data Output Voltage-Low
VOL -Vcc
-2
These outputs are compatible with 10K,
10KH and 100KECL and LVPECL outputs.
Data Output Voltage-High
VOH-
-1.1
-2
V
Vcc
VSDL-Vcc
Vcc
Signal Detect Output Voltage-Low
Signal Detect Output Voltage-High
Signal Detect Output Voltage-Low
Signal Detect Output Voltage-High
V
C-13-155-T3-SXX3(5) LVPECL SD Output
C-13-155(C)-T3-SXX3(5) LVTTL SD Output
-1.1
-
V
VSDH-
VSDL
VSDH
V
2.0
-
V
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
LUMINENTOIC.COM
LUMNDS272-JAN2904
rev. 0
2
155 Mbps Single Mode Transceiver
C-13-155(C)-T3-SXX3(5)
Connection Diagram
Receiver Signal Ground
Receiver Data Out
1. (Rx GND)
2. (RD +)
3. (RD-)
NC
Receiver Data Out Bar
Signal Detect
4. (SD)
Receiver Power Supply
Transmitter Power Supply
Transmitter Data In Bar
Transmitter Data in
5. (Rx Vcc)
6. (Tx Vcc)
7. (TD-)
8. (TD+)
9. (Tx GND)
Top View
NC
Transmitter Signal Ground
PIN
Symbol
RxGND
RD+
Notes
Directly connect this pin to the receiver ground plane
1
2
3
4
5
6
7
See recommended circuit schematic
RD-
See recommended circuit schematic
SD
Active high on this indicates a received optical signal
+3.3V dc power for the receiver section
+3.3V dc power for the transmitter section
See recommended circuit schematic
RxVcc
TxVcc
TD-
8
TD+
See recommended circuit schematic
9
TxGND
Directly connect this pin to the transmitter ground plane
Legal Notice
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
LUMINENTOIC.COM
LUMNDS272-JAN2904
rev. 0
3
155 Mbps Single Mode Transceiver
C-13-155(C)-T3-SXX3(5)
Recommended Circuit Schematic
The split-loaded terminations for ECL signals need to be located at the input of devices receiving those ECL signals.
The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc.
A GND plane under the module is required for good EMI and sensitivity performance.
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
LUMINENTOIC.COM
LUMNDS272-JAN2904
rev. 0
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
4
155 Mbps Single Mode Transceiver
C-13-155(C)-T3-SXX3(5)
Package Diagram
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
LUMINENTOIC.COM
LUMNDS272-JAN2904
rev. 0
5
155 Mbps Single Mode Transceiver
C-13-155(C)-T3-SXX3(5)
Package Diagram
ST Transceiver Assembly
Top View
Front View
Rear View
Side View
Qualification Information
The 155 Mbps SM Transceiver has passed the following qualification tests and meets the intent of Telcordia (Bellcore) GR-468-CORE.
Qualification Test
Mechanical Shock
Vibration
Condition
Sample Size
Reference
500 g
11
11
11
11
11
11
11
6
MIL-STD-883
20g, 20 Hz-2,000 Hz
MIL-STD-883D Method 2007
MIL-STD-883E Method 2003.7
MIL-STD-883 Method 1011
MIL-STD-883 Method 1010
MIL-STD-202 Method 103
MIL-STD-883 Method 1004
MIL-STD-883D Method 3015.7
Solderability
-
25ºC
Thermal Shock
Temperature Cycling
Damp Heat
500 cycles
40ºC, 95% RH, 1344 hrs
10 cycles
Cyclic Moisture Resistance
ESD
± 500V
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
LUMINENTOIC.COM
LUMNDS272-JAN2904
rev. 0
6
155 Mbps Single Mode Transceiver
C-13-155(C)-T(3)-SXX3(5)
Ordering Information
C -13 - 155(C) - T(3) - SXX 3(5)
• Wavelength = 1310 nm
• Communication protocol
(155 Mbps)
• +3.3V Transceiver
• Single mode fiber
• Connector options(SC/ST)
• Intermediate Reach
Warnings
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow
guidelines according to proper ESD procedures.
Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.
Legal Notice
IMPORTANT NOTICE!
All information contained in this document is subject to change without notice, at Luminentʼs sole and absolute discretion. Luminent warrants performance of its
products to current specifications only in accordance with the companyʼs standard one-year warranty; however, specifications designated as “preliminary” are given to
describe components only, and Luminent expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties
of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the companyʼs Terms and Conditions of Sale for further
warranty information.
Luminent assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property
described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and Luminent makes no representa-
tions or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT
intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. Luminent customers using or selling
products for use in such applications do so at their own risk and agree to fully defend and indemnify Luminent for any damages resulting from such use or sale.
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer agrees that Luminent is not liable for any actual,
consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact Lumi-
nent to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current.
© Luminent, Inc. 2003
All rights reserved
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
LUMINENTOIC.COM
LUMNDS272-JAN2904
rev. 0
7
相关型号:
C-13-155-T-SSC7BG5
FIBER OPTIC TRANSCEIVER, 1290-1330nm, 155Mbps(Tx), 155Mbps(Rx), THROUGH HOLE MOUNT, SC CONNECTOR
SOURCE
C-13-155-T-SSC7BGR
Transceiver, 1290nm Min, 1330nm Max, 155Mbps(Tx), 155Mbps(Rx), SC Connector, Through Hole Mount, 9.8 NM HEIGHT, ROHS COMPLIANT-9
SOURCE
C-13-155-T-SSC7DG5
FIBER OPTIC TRANSCEIVER, 1290-1330nm, 155Mbps(Tx), 155Mbps(Rx), THROUGH HOLE MOUNT, SC CONNECTOR
SOURCE
C-13-155-T-SSC7DGR
Transceiver, 1290nm Min, 1330nm Max, 155Mbps(Tx), 155Mbps(Rx), SC Connector, Through Hole Mount, 9.8 NM HEIGHT, ROHS COMPLIANT-9
SOURCE
C-13-155-T-SSC7EG5
FIBER OPTIC TRANSCEIVER, 1290-1330nm, 155Mbps(Tx), 155Mbps(Rx), THROUGH HOLE MOUNT, SC CONNECTOR, 9.80 MM HEIGHT, PACKAGE-9
SOURCE
C-13-155-T-SSC7EGR
Transceiver, 1290nm Min, 1330nm Max, 155Mbps(Tx), 155Mbps(Rx), SC Connector, Through Hole Mount, 9.8 NM HEIGHT, ROHS COMPLIANT-9
SOURCE
©2020 ICPDF网 联系我们和版权申明