C-13-622-T-SSC-G5 [SOURCE]
Transceiver, 1274nm Min, 1356nm Max, 622Mbps(Tx), 622Mbps(Rx), SC Connector, Through Hole Mount, 10.40 MM HEIGHT, PACKAGE-9;
| 型号： | C-13-622-T-SSC-G5 |
| 厂家： | 
SOURCE PHOTONICS, INC. |
| 描述： | Transceiver, 1274nm Min, 1356nm Max, 622Mbps(Tx), 622Mbps(Rx), SC Connector, Through Hole Mount, 10.40 MM HEIGHT, PACKAGE-9 通信 光纤 |
| 文件： | 总7页 (文件大小：545K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
622 Mbps Single Mode Transceiver
C-13-622(C)-T(3)-SSC
Features
• SC Duplex Single Mode Transceiver
• Industry Standard 1x9 Footprint
• Complies with SONET OC-12 SDH STM-4
• Single +3.3V/+5V Power Supply
• OperatingTemperature Range: 0 to 70ºC and -40 to 85ºC
• PECL Differential Inputs and Outputs
• PECL/LVPECL Signal Detection Output [C-13-622-T(3)-SSC]
• TTL/LVTTL Signal Detection Output [C-13-622C-T(3)-SSC]
• Wave Solderable and Aqueous Washable
• Uncooled laser diode with MQW structure
• Complies with Telcordia (Bellcore) GR-468-CORE
• SONET OC-12 Application
• RoHS compliance available
Absolute Maximum Rating
Parameter
Symbol
Min.
Max.
Unit
Note
Power Supply Voltage
Vcc
0
6
V
C-13-622(C)-T-SSC
Power Supply Voltage
Output Current
Vcc
Iout
0
0
3.6
30
V
mA
ºC
C-13-622(C)-T3-SSC
Soldering Temperature
Storage Temperature
-
260
85
10 seconds on leads only
-
Tstg
-40
ºC
Recommended Operating Condition
Parameter
Symbol
Min.
Typ.
Max.
Unit
Note
Power Supply Voltage
Vcc
Vcc
Topr
Topr
-
4.75
3.1
0
5
5.25
3.5
70
85
-
V
C-13-622(C)-T-SSC
Power Supply Voltage
Operating Temperature (Case)
Operating Temperature (Case)
Data Rate
3.3
V
C-13-622(C)-T3-SSC
C-13-622(C)-T(3)-SSC(D/E)
C-13-622(C)-T(3)-SSCA(B/C)
-
-
ºC
-40
-
ºC
622
Mbps
Transmitter Specifications
Parameter
Symbol
Min
Typical
Max
Unit
Notes
Optical
Optical Transmit Power
Po
λp
-15
1274
-
-
-8
1356
2.5
-
dBm
nm
nm
dB
Output center Wavelength
1310
Output Spectrum Width
Extinction Ratio
∆λrms
ER
-
-
RMS(σ)
8.2
Output Eye
Compliant with ITU-T G.957/STM-4 Eye Mask
Optical Rise Time
Optical Fall Time
Relative Intensity Noise
tr
tf
-
-
-
-
-
-
1.2
1.2
ns
ns
10% to 90% Values
10% to 90% Values
RIN
-120
dB/Hz
Measured with 223-1 PRBS with 72 ones and
72 zeros.
Total Jitter
TJ
-
-
0.55
ns
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
LUMINENTOIC.COM
LUMNDS616-Jun2106
Rev A.1
1
622 Mbps Single Mode Transceiver
C-13-622(C)-T(3)-SSC
Transmitter Specifications
Parameter
Symbol
Min
Typical
Max
Unit
Notes
Electrical
Maximum current is specified at Vcc=
Maximum @ maximum temperature
ICC
IIL
-
-
180
mA
Power Supply Current
Data Input Current-Low
Data Input Current-High
Differential Input Voltage
Data Input Voltage-Low
-350
-
-
-
-
-
-
350
-
µA
µA
mV
V
I
IH
V -VIL
IH
300
-2.0
VIL-VCC
-1.58
These inputs are compatible with 10K, 10KH
and 100K ECL and PECL inputs
Data Input Voltage-High
VIH-VCC
-1.1
-
-0.74
V
Receiver Specifications
Parameter
Symbol
Min
Typical
Max
Unit
Notes
Optical
Sensitivity
-10
-
-
-3
-
-
-
-
-
-
-28
dBm
dBm
dBm
dBm
dB
Measured with 223-1 PRBS,BER= 10
Maximum Input Power
Signal Detect-Asserted
Signal Detect-Deasserted
Signal Detect-Hysteresis
Wavelength of Operation
Pin
Pa
Pd
-
-28
-
-
Measured on transition: low to high
Measured on transition: high to low
-40
1
5
1100
1600
nm
Receiver Specifications
Parameter
Symbol
Min
Typical
Max
Unit
Note
Electrical
ICC
-
-
100
mA
The current excludes the output load current
Power Supply Current
Data output Voltage-Low
VOL -Vcc
-2
-1.1
-
-
-
-
-
-
-
-1.58
-0.74
0.5
V
V
V
These outputs are compatible with 10K,
10KH and 100KECL and LVPECL outputs
Data Output Voltage-High
VOH-
Vcc
VSDL
VSDH
Signal Detect Output Voltage-Low
Signal Detect Output Voltage-High
C-13-622C-T(3)-SSC
C-13-622-T(3)-SSC
2.0
-2.0
-1.1
-
Signal Detect Output Voltage-Low VSDL-Vcc
Signal Detect Output Voltage-High Vcc
-1.58
-0.74
V
V
VSDH-
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
LUMINENTOIC.COM
LUMNDS616-Jun2106
Rev A.1
2
622 Mbps Single Mode Transceiver
C-13-622(C)-T(3)-SSC
Connection Diagram
Receiver Signal Ground
Receiver Data Out
1. (Rx GND)
2. (Rx +)
3. (Rx-)
NC
Receiver Data Out Bar
Signal Detect
4. (SD)
Receiver Power Supply
Transmitter Power Supply
Transmitter Data In Bar
Transmitter Data in
5. (Rx Vcc)
6. (Tx Vcc)
7. (TX-)
8. (TX+)
9. (Tx GND)
Top View
NC
Transmitter Signal Ground
Warnings
PIN
Symbol
RxGND
RD+
Notes
Directly connect this pin to the receiver ground plane
See recommended circuit schematic
1
2
3
4
5
6
7
8
9
RD-
See recommended circuit schematic
SD
Active high on this indicates a received optical signal
DC power for the receiver section
RxVcc
TxVcc
TD-
DC power for the transmitter section
See recommended circuit schematic
TD+
See recommended circuit schematic
TxGND
Directly connect this pin to the transmitter ground plane
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
LUMINENTOIC.COM
LUMNDS616-Jun2106
Rev A.1
3
622 Mbps Single Mode Transceiver
C-13-622(C)-T(3)-SSC
Recommended Circuit Schematic
C-13-622-T(3)-SSC
Tx Vcc
Rx Vcc
9 8 7 6 5 4 3 2
1
C6
C5
R1 R3
R9
R5 R7
RD +
RD -
SD
TD +
TD -
Tx Vcc
Rx Vcc
R2 R4
R10 R6 R8
No internal
connection
No internal
connection
Transceiver
Top view
L1
Rx Vcc
Tx Vcc
C3
L2
C1
C2
Notes +3.3V:
Notes +5V:
Vcc
R1=R3=R5=R7=R9=130
R2=R4=R6=R8=R10=82
C1=C2=C3=C5=C6=0.1F
C4=10F
R1=R3=R5=R7=R9=82
R2=R4=R6=R8=R10=130
C1=C2=C3=C5=C6=0.1F
C4=10F
C4
L1=L2=1H
L1=L2=1H
C-13-622C-T(3)-SSC
Tx Vcc
Rx Vcc
9
8
7
6 5 4 3 2
1
C6
C5
R1
R3
R5 R7
RD +
RD -
SD
TD +
TD -
Tx Vcc
Rx Vcc
R6
R8
R2
R4
No internal
connection
No internal
connection
Transceiver
Top view
L1
Rx Vcc
Tx Vcc
C3
L2
C1
Notes +3.3V:
Notes +5V:
Vcc
R1=R3=R5=R7=130
R2=R4=R6=R8=82
C1=C2=C3=C5=C6=0.1F
C4=10F
R1=R3=R5=R7=82
R2=R4=R6=R8=130
C1=C2=C3=C5=C6=0.1F
C4=10F
C4
C2
L1=L2=1H
L1=L2=1H
The split-loaded terminations for ECL signals need to be located at the input of devices receiving those ECL signals.
The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc.
A GND plane under the module is required for good EMI and sensitivity performance.
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
LUMINENTOIC.COM
LUMNDS616-Jun2106
Rev A.1
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
4
622 Mbps Single Mode Transceiver
C-13-622(C)-T(3)-SSC
Package Diagram (10.4 mm SC transceiver assembly)
SC Transceiver Assembly 10.4mm
Front View
Top View
Blank: Black case
A : Black case
Rear View
Side View
Package Diagram (9.8 mm SC transceiver assembly)
SC Transceiver Assembly 9.8mm
Front View
Top View
x8
C, D: Black case
B, E: Blue case
Rear View
Side View
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
LUMINENTOIC.COM
LUMNDS616-Jun2106
Rev A.1
5
622 Mbps Single Mode Transceiver
C-13-622(C)-T(3)-SSC
Ordering Information
Available Options:ꢀ
C-13-622-T-SSC(A/B/C/D/E)
C-13-622-T3-SSC(A/B/C/D/E)
C-13-622C-T-SSC(A/B/C/D/E)
C-13-622C-T3-SSC(A/B/C/D/E)
C-13-622-T-SSC(A/B/C/D/E)-G5
C-13-622-T3-SSC(A/B/C/D/E)-G5
C-13-622C-T-SSC(A/B/C/D/E)-G5
C-13-622C-T3-SSC(A/B/C/D/E)-G5
Part unmbering Definition:
C - 13 - 622(C) - T(3) - S SC Temperature and Package
-RoHS
• Wavelength
13= 1310 nm
• Communication protocol
(622 Mbps)
622 = PECL/LVPEC Signal Detection Output
622C =TTL/LVTTL Signal Detection Output
• +3.3V / 5V FP Transceiver
T = 5V transceiver
T3 = 3.3V transceiver
• Single mode fiber
• Connector options
• Temperature range and package
Blank = commercial temperature(0 to 70 ºC), 10.4 mm, Black case
A = industrial temperature(-40 to 85 ºC), 10.4 mm, Black case
B = industrial temperature(-40 to 85 ºC), 9.8 mm, Blue case
C = industrial temperature(-40 to 85 ºC), 9.8 mm, Black case
D = commercial temperature(0 to 70 ºC), 9.8 mm, Black case
E = commercial temperature(0 to 70 ºC), 9.8 mm, Blue case
• Ordering Information
Blank = RoHS non-compliant product
G5 = RoHS 5/6-compliant product (lead exemption)
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
LUMINENTOIC.COM
LUMNDS616-Jun2106
Rev A.1
6
622 Mbps Single Mode Transceiver
C-13-622(C)-T(3)-SSC
Warnings:
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow
guidelines according to proper ESD procedures.
Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.
Legal Notes:
IMPORTANT NOTICE!
All information contained in this document is subject to change without notice, at LuminentOIC’s sole and absolute discretion. LuminentOIC warrants performance
of its products to current specifications only in accordance with the company’s standard one-year warranty; however, specifications designated as “preliminary” are
given to describe components only, and LuminentOIC expressly disclaims any and all warranties for said products, including express, implied, and statutory warran-
ties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the company’s Terms and Conditions of
Sale for further warranty information.
LuminentOIC assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual
property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and LuminentOIC makes
no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this docu-
ment are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. LuminentOIC customers
using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify LuminentOIC for any damages resulting from
such use or sale.
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer agrees that LuminentOIC is not liable for any
actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact
LuminentOIC to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current.
© LuminentOIC, Inc. 2003
All rights reserved
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
LUMINENTOIC.COM
LUMNDS616-Jun2106
Rev A.1
7
相关型号：
©2020 ICPDF网 联系我们和版权申明