SPG-FE-LX-IDFC [SOURCE]
Built-in PHY supporting SGMII Interface;![SPG-FE-LX-IDFC](http://pdffile.icpdf.com/pdf2/p00339/img/icpdf/SPG-FE-LX-ID_2088907_icpdf.jpg)
型号: | SPG-FE-LX-IDFC |
厂家: | ![]() |
描述: | Built-in PHY supporting SGMII Interface 光纤 |
文件: | 总10页 (文件大小:253K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
SPG-FE-LX-IDFC
Features
z
z
Built-in PHY supporting SGMII Interface
Built-in high performance MCU supporting easier
configuration
z
Support more link status monitor, such as CRC error
counter, package counter
z
z
z
z
z
z
z
z
100BASE-LX operation
1310nm FP laser and PIN photo-detector
Up to10km transmission with SMF
Standard serial ID information Compatible with SFP MSA
SFP MSA package with duplex LC connector
With Spring-Latch for high density application
+3.3V single power supply
Operating case temperature:
I-temp: -40 to +85°C; C-temp:-5 to 70°C
Regulatory Compliance
Table 1 - Regulatory Compliance
Feature
Standard
Performance
Electrostatic Discharge
MIL-STD-883E
Method 3015.7
Class 1
(ESD) to the Electrical Pins
Electrostatic Discharge (ESD) to the IEC 61000-4-2
Compatible with standards
Compatible with standards
Duplex LC Receptacle
Electromagnetic
GR-1089-CORE
FCC Part 15 Class B
Interference (EMI)
FDA 21CFR 1040.10 and 1040.11
EN (IEC) 60825-1,2
Compatible with Class I laser
product.
Laser Eye Safety
RoHS
2011/65/EU
Compliant with RoHS
Absolute Maximum Ratings
Table 2 - Absolute Maximum Ratings
Parameter
Symbol
Min.
Typical
Max.
Unit
Notes
Storage Temperature
Supply Voltage
TS
VCC
RH
-40
-0.5
5
-
-
-
+85
+3.6
+95
1.2
°C
V
Operating Relative Humidity
Power consumption
%
W
DS-7362 Rev 02 2013-11-21
SPG-FE-LX-IDFC
Recommended Operating Conditions
Table 3 – Recommended Operating Conditions
Parameter
Symbol
Min.
Typical
Max.
Unit
Notes
I-temp
TC
TC
-40
-5
-
-
+85
+70
3.50
350
°C
°C
Operating Case
Temperature
C-temp
Power Supply Voltage
Power Supply Current
Date Rate
VCC
ICC
3.10
-
3.3
-
V
mA
Mbps
1
125
Note 1: The max. power supply current after module work stable.
Optical Characteristics
Table 4 – Optical Characteristics
Transmitter
Parameter
Centre Wavelength
Symbol
λC
Min.
1260
-15
Typical
Max.
Unit
Notes
1310
1360
-8
nm
dBm
dBm
nm
Average Output Power
P0ut@TX Disable Asserted
Spectral Width (RMS)
Extinction Ratio
P0ut
P0ut
σ
1
1
-45
7.7
EX
9
dB
Rise/Fall Time (20%~80%)
Output Optical Eye
tr/tf
3
ns
2
3
Compatible with IEEE 802.3-2002
Receiver
Centre Wavelength
Receiver Sensitivity
Receiver Overload
Return Loss
λC
1260
1310
1570
-31.5
nm
dBm
dBm
dB
4
4
-8
12
LOS De-Assert
LOS Assert
LOSD
LOSA
-32.5
dBm
dBm
dB
-45
0.5
LOS Hysteresis
Total Jitter
4.5
0.43
UI
TJ
(SGMII Series Interface)
Notes:
1. The optical power is launched into 9/125um SMF.
2. Unfiltered, measured with 4B/5B code for 125Mbps
3. Measured with 4B/5B code for 125Mbps.
DS-7362 Rev 02 2013-11-21
SPG-FE-LX-IDFC
4. Measured with 4B/5B code for 125Mbps, worst-case extinction ratio, and BER ≤1 × 10-10.
Electrical Characteristics
Table 5 – Electrical Characteristics
Transmitter
Min.
Parameter
Symbol
Typical
Max.
Unit
Notes
Data Input Swing Differential
(SGMII Series interface)
VIN
200
2100
mV
1
ZIN
80
100
120
Vcc
Ω
Input Differential Impedance
Disable
2.0
TX Disable
V
Enable
Vee
2.0
Vee+0.8
Vcc
Fault
TX Fault
V
Vee
Receiver
370
Vee+0.5
Normal
DataOutput Swing Differential
(SGMII Series Interface)
VOUT
2000
mV
V
1
High
LOS
2.0
Vcc+0.3
Vee+0.5
Low
Vee
Notes:
1. PECL logic, internally AC coupled.
Recommended Host Board Power Supply Circuit
Figure 1, Recommended Host Board Power Supply Circuit
DS-7362 Rev 02 2013-11-21
SPG-FE-LX-IDFC
Recommended Interface Circuit
Figure 2, Recommended Interface Circuit
Pin Definitions
P in 20
P in 11
TO P V IE W
O F B O A R D
P in 10
B O T TO M V IE W
O F B O A R D
P in
1
Figure 3, Pin View
Table 6–Pin Function Definitions
Pin No.
Name
VeeT
Function
Plug Seq.
Notes
1
2
3
4
5
Transmitter Ground
1
3
3
3
3
TX Fault
Transmitter Fault Indication
Transmitter Disable
Module Definition 2
Module Definition 1
Note 1
Note 2
Note 3
Note 3
TX Disable
MOD-DEF2
MOD-DEF1
DS-7362 Rev 02 2013-11-21
SPG-FE-LX-IDFC
6
7
MOD-DEF0
Rate Select
LOS
Module Definition 0
Not Use
3
3
3
1
1
1
3
3
1
2
2
1
3
3
1
Note 3
Note 4
8
Loss of Signal
9
VeeR
VeeR
VeeR
RD-
Receiver Ground
Receiver Ground
Receiver Ground
Inv. Received Data Out
Received Data Out
Receiver Ground
Receiver Power
Transmitter Power
Transmitter Ground
Transmit Data In
Inv. Transmit Data In
Transmitter Ground
10
11
12
13
14
15
16
17
18
19
20
Notes:
Note 5
Note 5
RD+
VeeR
VccR
VccT
VeeT
TD+
Note 6
Note 6
TD-
VeeT
1. TX Fault is an open collector output, which should be pulled up with a 4.7k~10kΩ resistor on the host
board to a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; logic 1 indicates a
laser fault of some kind. In the low state, the output will be pulled to less than 0.8V.
2. TX Disable is an input that is used to shut down the transmitter optical output. It is pulled up within the
module with a 4.7k~10kΩ resistor. Its states are:
Low (0~0.8V):
(>0.8V, <2.0V):
High (2.0~3.465V):
Open:
Transmitter on
Undefined
Transmitter Disabled
Transmitter Disabled
3. MOD-DEF 0, 1, 2 are the module definition pins. They should be pulled up with a 4.7k~10kΩ resistor on
the host board. The pull-up voltage shall be VccT or VccR.
MOD-DEF 0 is grounded by the module to indicate that the module is present
MOD-DEF 1 is the clock line of two wire serial interface for serial ID
MOD-DEF 2 is the data line of two wire serial interface for serial ID
4. LOS is an open collector output, which should be pulled up with a 4.7k~10kΩ resistor on the host board
to a voltage between 2.0V and Vcc+0.3V. Logic 0 indicates normal operation; logic 1 indicates loss of
signa or link down with partner l. In the low state, the output will be pulled to less than 0.8V.
5. These are the differential receiver output. They are internally AC-coupled 100Ω differential lines which
should be terminated with 100Ω (differential) at host with SGMII interface.
6. These are the differential transmitter inputs. They are AC-coupled, differential lines with 100Ω
differential termination inside the module.
DS-7362 Rev 02 2013-11-21
SPG-FE-LX-IDFC
EEPROM Information
Table 7 –EEPROM Serial ID Memory Contents (A0h)
Field Size
Addr.
Name of Field
Hex
Description
(Bytes)
0
1
1
1
1
8
1
1
1
1
1
1
1
1
1
Identifier
03
SFP
MOD4
Ext. Identifier 04
Connector 07
Transceiver 00 00 00 10 00 00 00 00
2
LC
3—10
11
100BASE-LX
4B5B
Encoding
BR, nominal
Reserved
02
01
00
12
13
14
15
16
17
18
19
125Mbps
Length (9um)-km0A
Length (9um) 64
Length (50um) 00
Length (62.5um) 00
Length (copper) 00
10(Unit:km)
100(Unit:100m)
Reserved
Vendor name
Reserved
00
53 4F 55 52 43 45 50 48
4F 54 4F 4E 49 43 53 20
00
20—35
16
“SOURCEPHOTONICS “(ASCⅡ)
36
1
3
37—39
Vendor OUI 00 1F 22
53 50 47 46 45 4C 58 xx
“SPGFELXIDFC”
40—55
16
Vendor PN
Vendor rev
44 46 43 20 20 20 20 20
31 30 20 20
“SPGFELXCDFC” (ASCⅡ)
ASCⅡ( “31 30 20 20” means 1.0 revision)
1310nm
56—59
60-61
62
4
2
1
1
2
1
1
Wavelength 05 1E
Reserved
CC BASE
Options
00
63
xx
Check sum of bytes 0 - 62
64—65
66
00 1A
LOS, TX_FAULT and TX_DISABLE
BR, max
BR, min
00
67
00
xx xx xx xx xx xx xx xx
xx xx xx xx xx xx xx xx
68—83
16
Vendor SN
ASCⅡ.
84—91
92
8
1
Vendor date codexx xx xx xx xx xx 20 20 Year (2 bytes), Month (2 bytes), Day (2 bytes)
Reserved
Reserved
Reserved
68
B0
02
xx
93
1
94
1
95
1
CC_EXT
Vendor specific
Check sum of bytes 64 - 94
96—255
160
DS-7362 Rev 02 2013-11-21
SPG-FE-LX-IDFC
Recommended Software configuration
How to configure auto-negotiation, loopback, work speed
The module can support auto-negotiation, loopback configuration.
Please refer the following steps to configure:
Step 1: Access the module at 0xA2 via two-wire serial interface.
Step 2: Configure 0x6Dh/6Eh (Byte 109~110) as below table. Addr.109 default is “5Fh”. Addr.110 default is
“00h”.
Addr. 109
Function
“1”
FEFI condition detected
Disable
“0”
Default Value
(BIN)
bit7
FEFI Status
FEFI condition not ‘0’
detected
bit6
Fiber
Enable
‘1’
Auto-Negotiation
MAC
Bit5
Disable
Enable
‘0’
Auto-Negotiation
FEFI function
CRC checker
Fiber loop back
MAC loop back
Reserved
bit4
bit3
bit2
bit1
bit0
Disable
Enable
Enable
Enable
Enable
Reserved
‘1’
‘1’
‘1’
‘1’
‘1’
Disable/Reset
Disable
Disable
Reserved
Addr. 110
Function
“1”
“0”
Default Value
(BIN)
bit7
bit6
TX Disable State
TX-Disable
TX-Disable
TX-Disable
Reserved
TX-Enable
TX-Enable
Reserved
100Base
No fault
‘0’
‘0’
‘0’
‘0’
‘0’
Bit5~Bit4 Reserved
Bit3
Bit2
Work speed mode 1000Base
TX fault output
status
TX fault indication
Bit1
Bit0
LOS pin output
status
LOS asserted
(Link down)
LOS de-asserted
(Link up)
‘0’
‘0’
Data Ready status Not ready
Ready
Notes: “1” is invalid for Bit 3 in address 110(work speed is only 100Base).
Monitoring Specification
The digital diagnostic monitoring interface also defines another 256-byte memory map in EEPROM,
which makes use of the 8 bit address 1010001X (A2h). Please see
Figure 4. For detail EEPROM information, please refer to the related document of
SFF-8472 Rev 9.5. The monitoring specification of this product is described in Table 8.
DS-7362 Rev 02 2013-11-21
SPG-FE-LX-IDFC
Figure 4, EEPROM Memory Map Specific Data Field Descriptions
Table 8- Monitoring Specification
Parameter
Range
-40 to 95°C
-10 to 80°C
2.97 to 3.63V
3 to 80mA
Accuracy
Calibration
Internal
Internal
Internal
Internal
Internal
Internal
I-temp
±3°C
±3°C
±3%
Temperature
C-temp
Voltage
Bias Current
TX Power
RX Power
±10%
±3dB
±3dB
-15to -8 dBm
-32.5 to -8 dBm
Mechanical Diagram
Figure 4, Mechanical Diagram of SFP
DS-7362 Rev 02 2013-11-21
SPG-FE-LX-IDFC
Order Information
Table 9 – Order Information
Transmission
Part No.
Media
Data Rate(Mbps)
Temperature
Distance(km)
SPG-FE-LX-IDFC
SPG-FE-LX-CDFC
SMF
SMF
125
125
10
10
-40~+85°C
-5~+70°C
Warnings
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD).
A static free environment is highly recommended. Follow guidelines according to proper ESD procedures.
Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to
direct or indirect radiation.
Legal Notice
IMPORTANT NOTICE!
All information contained in this document is subject to change without notice, at Source Photonics’s sole
and absolute discretion. Source Photonics warrants performance of its products to current specifications
only in accordance with the company’s standard one-year warranty; however, specifications designated as
“preliminary” are given to describe components only, and Source Photonics expressly disclaims any and all
warranties for said products, including express, implied, and statutory warranties, warranties of
merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to
the company’s Terms and Conditions of Sale for further warranty information.
Source Photonics assumes no liability for applications assistance, customer product design, software
performance, or infringement of patents, services, or intellectual property described herein. No license,
either express or implied, is granted under any patent right, copyright, or intellectual property right, and
Source Photonics makes no representations or warranties that the product(s) described herein are free
from patent, copyright, or intellectual property rights. Products described in this document are NOT
intended for use in implantation or other life support applications where malfunction may result in injury or
death to persons. Source Photonics customers using or selling products for use in such applications do so
at their own risk and agree to fully defend and indemnify Source Photonics for any damages resulting from
such use or sale.
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer
agrees that Source Photonics is not liable for any actual, consequential, exemplary, or other damages
arising directly or indirectly from any use of the information contained in this document. Customer must
contact Source Photonics to obtain the latest version of this publication to verify, before placing any order,
that the information contained herein is current.
DS-7362 Rev 02 2013-11-21
SPG-FE-LX-IDFC
Contact
U.S.A. Headquarters
20550 Nordhoff Street
Chatsworth, CA 91311
USA
China
Taiwan
Building #2&5, West Export Processing Zone
No. 8 Kexin Road, Hi-Tech Zone
Chengdu, 611731, China
Tel: +86-28-8795-8788
9F, No 81, Shui Lee Rd.
Hsinchu, Taiwan, R.O.C.
Tel: +886-3-5169222
Fax: +886-3-5169213
Tel: +1-818-773-9044
Fax: +1-818-773-0261
Fax: +86-28-8795-8789
© Copyright Source Photonics, Inc. 2007~2013
All rights reserved
DS-7362 Rev 02 2013-11-21
相关型号:
©2020 ICPDF网 联系我们和版权申明