TPD-MR-04-36CDF5A [SOURCE]
Transponder, 1528nm Min, 1565nm Max, 9953Mbps(Tx), 9953Mbps(Rx), FC Connector, Panel Mount;
| 型号： | TPD-MR-04-36CDF5A |
| 厂家： | 
SOURCE PHOTONICS, INC. |
| 描述： | Transponder, 1528nm Min, 1565nm Max, 9953Mbps(Tx), 9953Mbps(Rx), FC Connector, Panel Mount 通信 光纤 |
| 文件： | 总12页 (文件大小：570K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TPD-MR-04-XXXXXXXX
Features
Description
Compliant with the 300 pin SFF MSA
TPD-MR-04-XXXXX C-band DWDM 300 pin SFF
transponder is intended for DWDM system
applications with reaches of up to 40km, which
provide multi-rate from 9.95Gbps to 11.3Gbps.
Support multi-rate from 9.953Gb/s to 11.3Gbps
C-band DWDM laser and PIN/APD receiver
100GHz channel spacing
800ps/nm chromatic dispersion
16-bit parallel 622.08Mbps LVDS data interface
Compliant I2C MSA (Edition 4.0) interface for
monitoring/control
The transmitter converts the electrical data into
10Gbit/s optical signal, which uses externally EA
modulated laser with specified driving circuit.
Supply voltage: +5.0V, +3.3V, +1.8V
Operating case temperature: -5℃ to +70℃
At the receiving side, the incoming data stream is
received at 10Gb/s PIN/APD receiver, which
converts it into a 10Gb/s electrical data stream.
Applications
Metro and Long haul DWDM system
The MUX section multiplexes 16 parallel 622Mb/s
electrical channels into a 10Gb/s series data stream
and sent it to the transmitter. And the DEMUX
section demultiplexes the 10Gb/s electrical data
stream into 16 parallel 622Mb/s electrical channels.
The parallel data is sent out to and get from the
300-pin MSA (Multi Source Agreement) compliant
connector.
Forward Error Correction (FEC) system
Optical Transport Network (OTN) System
Standard
Compliant with 300-PIN MSA
Compliant with ITU-T G.691
Compliant with ITU-T G.959.1
Compliant with Telcordia GR-253
Compliant with OIF SFI-4 interface
Compliant with Telcordia GR-468-Core
Compliant with IEC-60825-1 Class Ⅰ
The transmitter and receiver reference clock rates
are selectable for divide by 16 or 64.
DS-5229 Rev 00 2010-07-02
TPD-MR-04-XXXXXXXX
Function Block Diagram
Figure 1, Function Block Diagram
Absolute Maximum Ratings
Table 1- Absolute Maximum Ratings
Parameter
Symbol
TS
Min.
-40
-0.5
-0.5
-0.5
5
Max.
85
Unit
°C
V
Storage Temperature
Vcc
6.0
4.2
3.3
85
Supply Voltage
Vdd1
Vdd2
RH
V
V
Operating Relative Humidity (non-condensing)
Electro-Static Discharge
%
V
ESD
-
500
Recommended Operating Conditions
Table 2 - Recommended Operating Conditions
Parameter
Symbol
Min.
-5
Typ.
-
Max.
70
Unit
°C
V
Operating Case Temperature
TC
Vcc
4.75
3.13
1.71
5.0
3.3
1.8
5.25
3.46
1.89
Supply Voltage
Vdd1
Vdd2
V
V
DS-5229 Rev 00 2010-07-02
TPD-MR-04-XXXXXXXX
Icc
-
250
400
650
3.8
-
400
700
800
6.0
mA
mA
Supply Current
Idd1
Idd2
Pd
-
-
mA
Power consumption
Power supply noise rejection
Bit Rate
-
-
W
50
mVp-p
Gbps
BR
9.95
-
11.3
Optical Interface Characteristics
Table 3 - Optical Characteristics
Transmitter
Parameter
Symbol
Min.
Typical
Max.
Unit
nm
Notes
λC
fc
1528.773
-
1565.047
Wavelength Range
191.80
-
196.10
THz
dBm
dBm
dBm
GHz
pm
Output Power
POUT
ΔP
-2
-0.5
-
-
2
0.5
-30
-
1
1
Output Power Stability
Output Power at laser disable
Channel Spacing
-
P0UT-OFF
-
-
100
Wavelength Stability
Side Mode Suppression Ratio
Extinction Ratio
-100
45
8.2
-
-
-
-
-
100
-
SMSR
ER
dB
-
dB
Chromatic Dispersion
Output Optical Eye
800
ps/nm
Compliant with Telcordia GR-253-CORE and ITU-T G.691
20kHz~80MHz
Jitter Generation
-
-
-
-
0.3
0.1
UI
UI
2
2
4MHz~80MHz
Receiver
Centre Wavelength
λC
1528
-
1565
-17
-24
-
nm
PIN
-
-
-18
Receiver
PIN
dBm
3
3
Sensitivity
APD
PIN
-25
0
-9
-
-
-
-
-
Receiver
PIN-MAX
dBm
Overload
APD
-
Optical Path Penalty
2
dB
dB
Reflection of Receiver
Jitter Tolerance
-
-27
Compliant with Telcordia GR-253 and ITU-T G.825
Compliant with Telcordia GR-253 and ITU-T G.825
Jitter Transfer
Notes:
1. The optical power is launched into SMF.
2. Measured with a NRZ PRBS 231-1 test pattern @ 9.95328Gbps.
3. Measured with a NRZ PRBS 231-1 test pattern @ 9.95328Gbps, BER ≤1×10-12.
DS-5229 Rev 00 2010-07-02
TPD-MR-04-XXXXXXXX
Electrical Interface Characteristics
Table 4 - LVDS Input/Output Specification
Parameter
Input Differential Voltage
Input Differential impedance
Output Differential Voltage
Symbol
Min.
200
80
Typical
Max.
-
Unit
mV
Notes
VID
RID
VOD
-
100
-
120
800
500
mV
Output Differential impedance
Output Common Mode Voltage
Rise Time/Fall time
ROD
VCM
80
1.1
100
45
100
1.2
-
120
1.3
250
55
V
Trise/fall
TDC
ps
%
Clock Signal Duty Cycle
50
VP
Common Mode
Voltage
Differantial
Voltage
(VOD or VID)
(VCMI or VCMD
)
VN
Definition of Differantial Voltage Levels
Table 5 - LVTTL Input/Output Specification
Parameter
Input High Voltage
Symbol
Min.
2.0
Typical
Max.
Vdd1
0.8
Unit
V
Notes
VIH
VIL
-
-
Input Low Voltage
GND
V
Output High Voltage
Output Low Voltage
VIH
VIL
2.4
-
-
Vdd1
0.4
V
V
GND
Clock and Data Interfaces
Table 6 - Reference Clock characteristics
Transmitter
Parameter
Symbol
Min.
Typical
Max.
Unit
Notes
TxREFCLKP
TxREFCLKN
Frequency
155.52/622.08
-
MHz
Serial data-rate is 9.953Gbps
Frequency
tolerance
-100
+100
ppm
Rise/Fall time
Duty Cycle
Tr/Tf
TDC
-
-
500
60
ps
%
40
50
Receiver
RxREFCLKP
RxREFCLKN
Frequency
155.52/622.08
MHz
Serial data-rate is 9.953Gbps
DS-5229 Rev 00 2010-07-02
TPD-MR-04-XXXXXXXX
Frequency
tolerance
-100
-
+100
ppm
Rise/Fall time
Duty Cycle
Tr/Tf
TDC
-
-
500
60
ps
%
40
50
Table 7 - Transmitter/Receiver Parallel Data/Clock Interface
Parameter
Symbol
Level
Notes
Transmitter 16-bit parallel Date Input
TxDin[0:15]P/N
LVDS
TxDin0:LSB, TxDin15:MSB
Transmitter
Source
synchronous
TxPICLKP/N
LVDS
ParallelInput Clock
Transmitter Counter Clock
LVDS
LVDS
TxPCLKP/N
Receiver 16-bit parallel Date Output
Receiver Source synchronous Parallel
Output Clock
RxDout[0:15]P/N
RxDout0:LSB, RxDout15:MSB
RxPOCLKP/N
LVDS
Table 8 - Transmitter/Receiver Parallel Data/Clock Timing
Transmitter Data/Clock Timing: SERDES Input Timing at SERDES pin
Parameter
Duty Cycle(TW/TO)
Symbol
TDC
Min.
40
Typical
Max.
60
Unit
%
Notes
50
-
TxPICLK
TxDin
Rise and Fall time
Setup time
Tr/Tf
Ts
100
250
300
-
ps
20 – 80%
-
ps
Hold time
Th
250
-
-
ps
To
Tw
TxPICLKP
TxDin[0:15]P/N
Th
Ts
Ts: Measuring from the LHS inner data eye to the immediate rising edge of clock pulse
Th: Measuring from the rising edge of clock pulse to the inner RHS of data eye
Receiver Data/Clock Timing: SERDES Output Timing at SERDES pin
RxPOCLK
RxDout
Duty Cycle(TW/TO)
Rise and Fall time
TDC
40
-
-
-
-
60
%
ps
ps
ps
Tr/Tf
100
250
200
200
20 – 80%
Data/Clock skew
Tcq_min,
Tcq_max
-
-
DS-5229 Rev 00 2010-07-02
TPD-MR-04-XXXXXXXX
To
Tw
RxPOCLKP
Tcq_max
RxDout[0:15]P/N
Tcq_min
Table 9 - Monitor Clock
Parameter
Symbol
Level
Notes
Transmitter
The LVDS TxMCLK is either a 1/16 or 1/64 replica of the
clock used to time the serial data output. The rate of the
TxMCLK is always the same as that of the TxREFCLK
The LVDS RxMCLK is a 1/16 or 1/64 replica of the clock
recovered from the incoming data
monitor clock
TxMCLKP/N
LVDS
Receiver
RxMCLKP/N
LVDS
monitor clock
Digital Control Signal
Table 10 - Input Digital signals
Function
Module
Symbol
Level
Description
Module reset
Note
L
H
L
Reset both Tx and Rx section
(LVTTL with pull-up resistor)
MOD_RESET
LVTTL
LVTTL
LVTTL
RESET
Normal operation
Enable Loopback
Normal operation
Enable Loopback
Normal operation
Diagnostic
Loopback
DLOOPENB
LLOOPENB
(LVTTL with pull-up resistor)
(LVTTL with pull-up resistor)
H
L
Line Loopback
H
Transmitter
L
Reset MUX
Reset MUX
TxRESET
LVTTL
LVTTL
(LVTTL with pull-up resistor)
(LVTTL with pull-up resistor)
H
Normal operation
10.3G
0,0
0,1
1,0
1,1
L
11.1/11.3G
10.7G
Transmitter Bit
Rate Select
TxRATESEL1
TxRATESEL0
9.9G
Select
the
1/64 data-rate
frequency of
TxREFCLK
Enable internal
Line Timing
Enable/Disable
Laser
TxREFSEL
LVTTL
(LVTTL with pull-up resistor)
H
1/16 data-rate
L
H
L
Enable
TxLINETIMSEL LVTTL
(LVTTL with pull-up resistor)
Normal operation
Normal operation
Laser disabled
LsENABLE
LVTTL
(LVTTL with pull-down resistor)
H
DS-5229 Rev 00 2010-07-02
TPD-MR-04-XXXXXXXX
Internally TxFIFOERR is
L
MUX FIFO reset
connected to TxFIFORES,
TxFIFOERR will initiate a FIFO
reset
MUX
reset
FIFO
TxFIFORES
RxRESET
LVTTL
H
Normal operation
Receiver
(LVTTL with pull-up resistor)
L
Reset DEMUX
Normal operation
10.3G
Reset DEMUX
LVTTL
LVTTL
(LVTTL with pull-up resistor)
(LVTTL with pull-up resistor)
H
0,0
0,1
1,0
1,1
L
11.1/11.3G
10.7G
Receiver
Bit
RxRATESEL1
RxRATESEL0
Rate Select
9.9G
Select
the
1/64 data-rate
frequency of
RxREFCLK
RxREFSEL
RxMCLKSEL
RxLCKREF
LVTTL
LVTTL
LVTTL
(LVTTL with pull-down resistor)
(LVTTL with pull-up resistor)
(LVTTL with pull-up resistor)
(LVTTL with pull-up resistor)
(LVTTL with pull-up resistor)
H
1/16 data-rate
Select
the
L
H
L
1/64 data-rate
1/16 data-rate
frequency of
RxMCLK
Lock
Lock to RxREFCLK
Normal operation
RxPOCLK to
RxREFCLK
H
Mutes
the
Mutes the
L
RxDOUT[0:15]
RxDOUT[0:15]
Normal operation
RxMUTEDOUT LVTTL
H
L
Mutes
the
Mutes the RxMCLK
Normal operation
receiver output RxMUTEMCLK LVTTL
monitor clock
H
L
Mutes receiver
Mutes the
RxPOCLK
parallel output
RxMUTEPOCLK LVTTL
(LVTTL with pull-up resistor)
clock
H
Normal operation
RxPOCLK
Digital Alarm Signal
Table 11 - Alarms Digital signals
Function
Symbol
Level
Description
Note
Any alarm from
L
both transmitter
and receiver
Indicates
all
Activation Time: 10ms
Deactivation Time: 10ms
ALMINT
LVTTL
alarm active
H
Normal operation
Transmitter
DS-5229 Rev 00 2010-07-02
TPD-MR-04-XXXXXXXX
L
Alarm active
Loss of transmitter PLL lock
Activation Time: 10ms
Loss of Tx PLL
lock
TxLOCKERR LVTTL
H
Normal operation
Deactivation Time: 10ms
Alarm active
(FIFO overflow)
Normal operation
Alarm active
L
Internally TxFIFOERR is connected to
TxFIFORES,
MUX FIFO error TxFIFOERR LVTTL
H
Alarm when laser bias changes by a
factor of 2 from beginning of life
Activation Time: 10 ms
L
(laser bias
Laser bias out
LsBIASALM LVTTL
of range
current alarm)
Normal operation
Deactivation Time: 10 ms
H
L
Laser
Laser temperature 5°C from nominal,
Activation Time : 10ms
Alarm active
Normal operation
Alarm active
temperature out LsTEMPALM LVTTL
of range
H
L
Deactivation Time : 10ms
Laser
output
Output power degrades 3dB below the
BOL Activation Time : 10ms
Deactivation Time : 10ms
power out of LsPOWALM LVTTL
range
H
Normal operation
Alarm from
transmitter
L
Activation Time: 10 ms;
Deactivation Time: 10 ms
Tx alarms
TxALMINT
LVTTL
H
Normal operation
Receiver
Loss of Rx PLL
lock
L
H
L
Alarm active
Normal operation
Alarm active
Activation Time: 10ms
RxLOCKERR LVTTL
Deactivation Time: 20ms
Loss of receiver
Activation Time: <10ms
average power RxPOWALM LVTTL
alarm
Deactivation Time: <10ms
H
Normal operation
L
Alarm active
Loss of receiver
Activation Time: 10 ms;
Deactivation Time: 10 ms
RxSIGALM
LVTTL
a.c.power alarm
Rx alarms
H
Normal operation
Alarm from
L
Activation Time: 10 ms;
Deactivation Time: 10 ms
Receiver
RxALMINT
LVTTL
H
Normal operation
Analog Monitoring Signal
Table 12 - Monitor Signals
Transmitter
Symbol
Function
Min.
0.47
Typ.
0.5
Max.
Unit
Normalized laser power monitor voltage BOL
Laser power monitor voltage slope
0.53
V
LsPOWMON
0.25 V change for 50% power variation
Laser bias monitor voltage offset
0.2
18
0
2
V
mV/mA
V
LsBIASMON
LsTEMPMON
Laser bias monitor voltage slope
20
2.5
22
2.6
Normalized laser temperature Monitor voltage
2.4
DS-5229 Rev 00 2010-07-02
TPD-MR-04-XXXXXXXX
Laser temperature monitor voltage slop
Normalized laser wavelength monitor voltage
Laser temperature monitor voltage slop
23
-
25
27
-
mV/℃
V
1.25
200
LsWAVEMON
-
-
mV/GHz
Receiver
Input optical power monitor voltage PIN
0.8
6
1
8
-
1.0
10
+2
V/mW
V/mW
dB
slope
APD
RxPOWMON
Input optical power monitor error
-2
I2C Serial Interface
Table 13 – I2C Interface
Function
Symbol
Level
Description
Note
I2C address input for module
addressing (LSB)
(LVTTL with pull-down
resistor)
I2CAD0
LVTTL
LVTTL
LVTTL
I2C address input for module
addressing
(LVTTL with pull-down
resistor)
I2C Address
I2CAD1
I2CAD2
I2C address input for module
addressing (MSB)
(LVTTL with pull-down
resistor)
Open
collector
Open
I2C clock input/output for
remote access
I2C Clock
I2C Data
I2CCLOCK
I2CDATA
N/A
N/A
I2C data input/output for
remote access
collector
DS-5229 Rev 00 2010-07-02
TPD-MR-04-XXXXXXXX
Pin Definitions
Table 15 - Pin Function Definitions
K
J
H
GND
G
F
+1.8V
E
D
GND
C
B
A
1
2
3
4
5
6
7
8
+5V
+5V
NUC
FFU
RxDout12P
RxDout12N
GND
RxDout8P
RxDout8N
GND
RxDout4P
RxDout4N
GND
GND
GND
FFU
GND
GND
RxDout0P
RxDout0N
GND
GND
+1.8V
GND
RxRATESEL0 RxRATESEL1
FFU
RxPOWMON
+3.3V
I2CAD0
GND
+3.3V
+3.3V
NUC
NUC
GND
RxDout13P
RxDout13N
GND
RxDout9P
RxDout9N
GND
RxDout5P
RxDout5N
RxDout1P
RxDout1N
GND
GND
+3.3V
GND
RxRESET
+3.3V
NUC
DLOOPENB
GND
RxPOWALM
+3.3V
I2CAD1
GND
GND RxMUTE Dout
FFU
RxDout14P
RxDout14N
GND
RxDout10P
RxDout10N
GND
RxDout6P
GND
GND
RxDout2P
RxDout2N
GND
+3.3V
FFU
GND
+3.3V
GND
RxDout6N
GND
9 RxMUTEPOCLK
NUC
FFU
NUC
I2CAD2
GND
RxLCKREF
GND
10
11
NUC
NUC
NUC
GND
RxDout15P
RxDout15N
GND
NUC
RxDout11P
RxDout11N
GND
RxDout7P
RxDout7N
GND
RxDout3P
RxDout3N
GND
NUC
GND
NUC
GND
GND
12 RxMUTEMCLK
NUC
FFU
RxSIGALM
NUC
MOD RESET
GND
RxMCLKSEL
GND
13
14
NUC
NUC
FFU
GND
FFU
RxPOCLKP
RxPOCLKN
GND
RxMCLKP
RxMCLKN
GND
RxREFCLKP
RxREFCLKN
GND
RxALMINT
NUC
GND
FFU
NUC
GND
GND
15 I2CCLOCK
ALM INT
GND
GND
RxREFSEL
+1.8V
FFU
RxLOCKERR
GND
16
17
18
19
20
+5V
+5V
TxALMINT
FFU
TxDin12P
TxDin12N
GND
TxDin8P
TxDin8N
GND
GND
TxDin4P
TxDin4N
GND
TxDin0P
TxDin0N
GND
GND
+1.8V
GND
GND
I2CDATA
+3.3V
+3.3V
NUC
FFU
LsBIASMON
+3.3V
LsPOWMON
GND
NUC
FFU
GND
TxDin13P
TxDin13N
GND
TxDin9P
TxDin9N
GND
TxDin5P
TxDin5N
GND
TxDin1P
TxDin1N
GND
FFU
GND
+3.3V
GND
GND
21 TxRATESEL0 TxRATESEL1
FFU
LsENABLE
+3.3V
LsTEMPMON GND
NUC
22
23
24
25
26
+3.3V
+3.3V
FFU
FFU
GND
TxDin14P
TxDin14N
GND
TxDin10P
TxDin10N
GND
GND
GND
TxDin6P
TxDin6N
GND
GND
TxDin2P
TxDin2N
GND
GND
+3.3V
GND
TxRESET
NUC
NUC
FFU
LsBIASALM
NUC
FFU
FFU
NUC
GND
TxDin15P
TxDin15N
GND
TxDin11P
TxDin11N
GND
GND
TxDin7P
TxDin7N
GND
GND
TxDin3P
TxDin3N
GND
NUC
NUC
GND
NUC
GND
GND
27 TxFIFORES
NUC
LLOOPENB
GND
LsTEMPALM
NUC
FFU
TxPICLKSEL
GND
28
29
NUC
NUC
LsWAVEMON
FFU
TxPICLKP
TxPICLKN
GND
TxPCLKP
TxPCLKN
GND
GND
TxMCLKP
TxMCLKN
GND
TxREFCLKP
TxREFCLKN
GND
GND
NUC
GND
GND
30 TxFIFOERR
NUC
TxLINETIMESEL
TxREFSEL
LsPOWALM
TxLOCKERR
FFU: Reserved For Future Use
NUC: No Use Connection
DS-5229 Rev 00 2010-07-02
TPD-MR-04-XXXXXXXX
Mechanical Diagram
The mechanical design diagram is shown in Figure 2.
Figure 2, Mechanical Diagram
Ordering Information
Part No.
Product Description
C-band DWDM Wavelength, 9.95~11.3Gbps, 40km, PIN receiver, 10G SFF 300pin,
LC connector, -5°C~+70°C,
TPD-MR-04-XXCDL5A
C-band DWDM Wavelength, 9.95~11.3Gbps, 40km, APD receiver, 10G SFF
300pin, LC connector, -5°C~+70°C,
TPD-MR-04-XXCDL5B
TPD-MR-04-XXCDS5A
TPD-MR-04-XXCDS5B
TPD-MR-04-XXCDF5A
TPD-MR-04-XXCDF5B
C-band DWDM Wavelength, 9.95~11.3Gbps, 40km, PIN receiver, 10G SFF 300pin,
SC connector, -5°C~+70°C,
C-band DWDM Wavelength, 9.95~11.3Gbps, 40km, APD receiver, 10G SFF
300pin, SC connector, -5°C~+70°C,
C-band DWDM Wavelength, 9.95~11.3Gbps, 40km, PIN receiver, 10G SFF 300pin,
FC connector, -5°C~+70°C,
C-band DWDM Wavelength, 9.95~11.3Gbps, 40km, APD receiver, 10G SFF
300pin, FC connector, -5°C~+70°C,
Note: XX is from 18 (191.80THz) to 61(196.10THz)，100GHz spacing.
DS-5229 Rev 00 2010-07-02
TPD-MR-04-XXXXXXXX
Warnings
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A
static free environment is highly recommended. Follow guidelines according to proper ESD procedures.
Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to
direct or indirect radiation.
Legal Notice
IMPORTANT NOTICE!
All information contained in this document is subject to change without notice, at Source Photonics’s sole and
absolute discretion. Source Photonics warrants performance of its products to current specifications only in
accordance with the company’s standard one-year warranty; however, specifications designated as
“preliminary” are given to describe components only, and Source Photonics expressly disclaims any and all
warranties for said products, including express, implied, and statutory warranties, warranties of
merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the
company’s Terms and Conditions of Sale for further warranty information.
Source Photonics assumes no liability for applications assistance, customer product design, software
performance, or infringement of patents, services, or intellectual property described herein. No license, either
express or implied, is granted under any patent right, copyright, or intellectual property right, and Source
Photonics makes no representations or warranties that the product(s) described herein are free from patent,
copyright, or intellectual property rights. Products described in this document are NOT intended for use in
implantation or other life support applications where malfunction may result in injury or death to persons.
Source Photonics customers using or selling products for use in such applications do so at their own risk and
agree to fully defend and indemnify Source Photonics for any damages resulting from such use or sale.
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer
agrees that Source Photonics is not liable for any actual, consequential, exemplary, or other damages arising
directly or indirectly from any use of the information contained in this document. Customer must contact
Source Photonics to obtain the latest version of this publication to verify, before placing any order, that the
information contained herein is current.
Contact
U.S.A Headquaters
20550 Nordhoff Street
Chatsworth, CA 91311
USA
China
Taiwan
Building #2&5, West Export Processing
Zone No. 8 Kexin Road, Hi-Tech Zone
Chengdu, 611731, China
Tel: +86-28-8795-8788Fax:
+86-28-8795-8789
9F, No 81, Shui Lee Rd.
Hsinchu, Taiwan, R.O.C.
Tel: +886-3-5169222
Fax: +886-3-5169213
Tel: +1-818-773-9044
Fax: +1-818-773-0261
© Copyright Source Photonics, Inc. 2007~2010
All rights reserved
DS-5229 Rev 00 2010-07-02
相关型号：
TPD-MR-04-36CDL5A
Transponder, 1528nm Min, 1565nm Max, 9953Mbps(Tx), 9953Mbps(Rx), LC Connector, Panel Mount
SOURCE
TPD-MR-04-36CDL5B
Transponder, 1528nm Min, 1565nm Max, 9953Mbps(Tx), 9953Mbps(Rx), LC Connector, Panel Mount
SOURCE
TPD-MR-04-37CDF5B
Transponder, 1528nm Min, 1565nm Max, 9953Mbps(Tx), 9953Mbps(Rx), FC Connector, Panel Mount
SOURCE
TPD-MR-04-42CDS5A
Transponder, 1528nm Min, 1565nm Max, 9953Mbps(Tx), 9953Mbps(Rx), SC Connector, Panel Mount
SOURCE
TPD-MR-04-43CDS5B
Transponder, 1528nm Min, 1565nm Max, 9953Mbps(Tx), 9953Mbps(Rx), SC Connector, Panel Mount
SOURCE
TPD-MR-04-46CDL5A
Transponder, 1528nm Min, 1565nm Max, 9953Mbps(Tx), 9953Mbps(Rx), LC Connector, Panel Mount
SOURCE
TPD-MR-04-47CDS5A
Transponder, 1528nm Min, 1565nm Max, 9953Mbps(Tx), 9953Mbps(Rx), SC Connector, Panel Mount
SOURCE
TPD-MR-04-48CDF5B
Transponder, 1528nm Min, 1565nm Max, 9953Mbps(Tx), 9953Mbps(Rx), FC Connector, Panel Mount
SOURCE
TPD-MR-04-48CDL5B
Transponder, 1528nm Min, 1565nm Max, 9953Mbps(Tx), 9953Mbps(Rx), LC Connector, Panel Mount
SOURCE
TPD-MR-04-48CDS5B
Transponder, 1528nm Min, 1565nm Max, 9953Mbps(Tx), 9953Mbps(Rx), SC Connector, Panel Mount
SOURCE
TPD-MR-04-50CDS5B
Transponder, 1528nm Min, 1565nm Max, 9953Mbps(Tx), 9953Mbps(Rx), SC Connector, Panel Mount
SOURCE
TPD-MR-04-55CDL5A
Transponder, 1528nm Min, 1565nm Max, 9953Mbps(Tx), 9953Mbps(Rx), LC Connector, Panel Mount
SOURCE
©2020 ICPDF网 联系我们和版权申明