SW1305A [STANLEY]
3.5 x 3.5 mm (h=1.6 mm) Type White LED; 3.5 ×3.5毫米（ H = 1.6毫米）式白光LED
| 型号： | SW1305A |
| 厂家： | 
STANLEY ELECTRIC CO.,LTD. |
| 描述： | 3.5 x 3.5 mm (h=1.6 mm) Type White LED |
| 文件： | 总14页 (文件大小：306K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SW1305A
3.5 x 3.5 mm (h=1.6 mm) Type White LED
Features
Package
3.5 x 3.5 mm (h=1.6 mm) Type, Water clear resin
Product features
・Outer Dimension 3.5 x 3.5 x 1.6mm ( L x W x H )
・Temperature range
Storage Temperature : -40℃～100℃
Operating Temperature : -30℃～85℃
・Lead–free soldering compatible
・RoHS compliant
Chromaticity coordinates
x = 0.34TYP., y = 0.34TYP.
(Condition : IF=20mA)
Spatial distribution
Die materials
52 deg.
InGaN
Optical efficiency
68 lm/W
Rank grouping parameter
Sorted by luminous intensity and chromaticity per rank taping
Assembly method
Soldering methods
Taping and reel
Auto pick & place machine (Auto Mounter)
Reflow soldering and manual soldering
1,000pcs per reel in a 12mm width tape. (Standard)
Reel diameter:φ180mm
ESD
1kV (HBM)
Recommended Applications
Cellular Phone, Mobile Equipment, Electric Household Appliances, Other General Applications
Page 1
2009.1.26
SW1305A
3.5 x 3.5 mm (h=1.6 mm) Type White LED
Color and Luminous Intensity
(Ta=25℃)
Luminous Intens ity
Iv (mc d)
Luminous Flux
Emitted
Color
Lens
Color
Part No.
Material
InGaN
v (lm)
φ
MIN.
TYP.
IF
TYP.
IF
Water
Clear
White
S W1305A
8,500 13,000 20/chip
13
20/chip
※Note : The above luminous intensity(Iv) is the setup values of the sorting machine.
(Tolerance : IV…±10%)
Page 2
2009.1.26
SW1305A
3.5 x 3.5 mm (h=1.6 mm) Type White LED
Absolute Maximum Ratings
(Ta=25℃)
Item
Symbol Absolute Maximum Ratings
Unit
mW
225(3chips)
75(1chip)
20(1chip)
Power Dissipation
Pd
Forward Current
Pulse Forward
IF
mA
mA
100(1chip)
IFRM
Current ※
1
I
0.5
2.5
mA/
⊿
℃
Derating※
2
F
(Ta=60 or higher)
℃
I
mA/
V
⊿
℃
FRM
Reverse Voltage
VR
5(1chip)
Operating
Temperature
Topr
Tstg
-30 +85
～
℃
℃
Storage Temperature
-40 +100
～
※1 IFRM Measurement condition : Pulse Width≦1ms, Duty≦1/20
※2 Three dies are lit simultaneously.
Page 3
2009.1.26
SW1305A
3.5 x 3.5 mm (h=1.6 mm) Type White LED
Electro-Optical Characteristics
(Ta=25℃)
Item
S ymbol Characteristics
Unit
V
Condition
TYP.
MAX .
MAX .
3.2
3.6
Forward Voltage IF =20mA/1chip
VF
IR
Reverse Current
VR =5V/1chip
100
52
A
μ
Half Intensity
Angle
IF =20mA/1chip
2
1/2 TYP.
TYP.
deg.
θ
x
0.34
0.34
-
-
Chromaticity
Coordinates
IF =20mA/1chip
y
TYP.
Page 4
2009.1.26
SW1305A
3.5 x 3.5 mm (h=1.6 mm) Type White LED
(Ta=25℃)
Luminous Intensity Rank
Intensity Tolerance each Rank : +/-10%
Rank
IV（mcd）
MIN. MAX.
8,500 10,000
Condition
DZ
E 1
E 2
E 3
10,000
12,000
15,000
12,000
15,000
18,000
IF=20mA/1chip
※Please contact our sales staff concerning rank designation.
Page 5
2009.1.26
SW1305A
3.5 x 3.5 mm (h=1.6 mm) Type White LED
(Ta=25℃)
Sorting Chart for Chromaticity Coordinates
Chromaticity Coordinates Tolerance Each Rank : +/-0.02
LEFT DOWNpoint
LEFT UP point
RIGHT UP point
RIGHT UP point
Rank
4A
x
y
x
y
x
y
x
y
0.3305
0.2595
0.2915
0.3045
0.3175
0.3305
0.3435
0.3565
0.3065
0.3045
0.3265
0.3135
0.2795
4B
4C
4D
4E
4F
0.3135
0.3265
0.3395
0.3525
0.3655
0.2795
0.2995
0.3195
0.3395
0.3595
0.3265
0.3465
0.3665
0.3865
0.4065
0.3175
0.3305
0.3435
0.3565
0.3695
0.3465
0.3665
0.3865
0.4065
0.4265
0.3265
0.3395
0.3525
0.3655
0.3785
0.2995
0.3195
0.3395
0.3595
0.3795
※ Please contact our sales staff concerning rank designation.
Page 6
2009.1.26
SW1305A
3.5 x 3.5 mm (h=1.6 mm) Type White LED
Technical Data
Spectral Distribution
Relative Intensity vs. Wavelength
Spatial Distribution Example
Condition : Ta = 25℃, IF = 20mA/chip
Condition : Ta = 25℃
Wavelength [nm]
Forward Voltage vs. Forward Current
Forward Current vs. Relative Intensity
Condition : Ta = 25℃
Condition : Ta = 25℃
Forward Voltage VF(V)/chip
Forward Current IF(mA)/chip
Page 7
2009.1.26
SW1305A
3.5 x 3.5 mm (h=1.6 mm) Type White LED
Technical Data
Derating
Derating
Ambient Temperature vs. Maximum Forward Current
Ambient Temperature vs. Maximum Forward Current
Repetition Frequency : f ≧ 50Hz
Repetition Frequency : f ≧ 50Hz
Ambient Temperature : Ta(℃)
Ambient Temperature : Ta(℃)
Ambient Temperature vs. Relative Intensity
Power Dissipation vs. Ambient Temperature
Condition : IF=20mA/chip
Ambient Temperature : Ta(℃)
Ambient Temperature : Ta(℃)
Page 8
2009.1.26
SW1305A
3.5 x 3.5 mm (h=1.6 mm) Type White LED
Technical Data
Dynamic Drive Rating
Duty cycle vs. Maximum Forward Current
Pulse Width vs. Maximum Tolerable Peak Current
Condition : Ta = 25℃
Condition : Ta = 25℃
Duty (%)
Pulse Width : tw (μs)
Ambient Temperature vs. Forward Voltage
Forward Current vs. Chromaticity
Condition : IF = 20mA/chip
Condition : Ta = 25℃
Ambient Temperature : Ta(℃)
x
Page 9
2009.1.26
SW1305A
3.5 x 3.5 mm (h=1.6 mm) Type White LED
Technical Data
Ambient Temperature vs. Chromaticity
Condition : IF = 20mA/chip
x
Page 10
2009.1.26
SW1305A
3.5 x 3.5 mm (h=1.6 mm) Type White LED
(Unit: mm)
Package Dimensions
Weight: (24)mg
(Unit: mm)
Recommended Soldering Pattern
Taping Specification
(Unit: mm)
・Quantity: 1,000pcs/ reel (standard)
Page 11
2009.1.26
SW1305A
3.5 x 3.5 mm (h=1.6 mm) Type White LED
Reflow Soldering Conditions
1) The above profile temperature gives the maximum temperature of the LED resin surface.
Please set the temperature so as to avoid exceeding this range.
2) Total times of reflow soldering process shall be no more than 2 times.
When the second reflow soldering process is performed, intervals between the first
and second reflow should be short as possible (while allowing some time for the
component to return to normal temperature after the first reflow) in order to prevent the
LED from absorbing moisture.
Manual Soldering Conditions
Iron tip temp.
Soldering time and frequency
(MAX.)
(MAX.)
350 ℃
3 s
1 time (MAX.)
Page 12
2009.1.26
SW1305A
3.5 x 3.5 mm (h=1.6 mm) Type White LED
Reliability Testing Result
Reliability Testing Result Applicable Standard
Testing Conditions
Duration
Failure
0/24
0/24
0/24
0/24
0/24
0/24
0/24
0/24
0/24
Room Temp.
EIAJ ED-
F
Ta = 25℃, I = 20mA/1chip
500 h
500 h
500 h
500 h
Operating Life
4701/100(101)
High Temp.
EIAJ ED-
F
Ta = 85℃ ,I = 5mA/1chip
Operating Life
4701/100(101)
Low Temp.
EIAJ ED-
F
Ta = -30℃, I = 20mA/1chip
Operating Life
4701/100(101)
Wet High Temp.
Operating Life
EIAJ ED-
4701/100(102)
F
Ta = 60℃, 90%, I = 20mA/1chip
Wet High Temp.
Storage Life
EIAJ ED-
4701/100(103)
Ta = 60℃, 90%
1,000 h
200 cycles
1,000 h
EIAJ ED-
4701/100(105)
Thermal Shock
Ta = -40℃ ～ 100℃ (each 15min.)
Ta = 100℃
High Temp.
Storage Life
EIAJ ED-
4701/200(201)
Low Temp.
Storage Life
EIAJ ED-
4701/200(202)
Ta = -40℃
1,000 h
Cycled Temp.
Humidity Life
EIAJ ED-
4701/200(203)
Ta = -10℃ ～ 65℃, 95%, 24h/cycle
10 cycles
Preheat : 150 ～ 180℃(120s Max.)
Soldering Temp. : 260℃(5s)
Moisture Soak : 30℃, 70%, 72h
Resistance to
Reflow Soldering
EIAJ ED-
4701/300(301)
Twice
0/24
Electric Static Discharge
(ESD)
EIAJ ED-
4701/300(304)
C = 100pF, R2 = 1.5KΩ, ±1,000V
once each polarity
2 h
0/24
0/12
98.1m/s2 (10G), 100 ～ 2KHz, 20min,
XYZ each direction
Vibration,
Variable Frequency
EIAJ ED-
4701/400(403)
Failure Criteria
Items
Symbols
Conditions
Failure criteria
F
Luminous Intensity
Iv
I =20mA/1chip
Testing Min. Value ＜ Spec. Min. Value x 0.5
Testing Max. Value ≧ Spec. Max. Value x 1.2
Testing Max. Value ≧ Spec. Max. Value x 2.5
F
Forward Voltage
Reverse Current
V
IF=20mA/1chip
R
I
R
V =5V/1chip
Occurrence of notable decoloration,
deformation and cracking
Cosmetic Appearance
-
-
Page 13
2009.1.26
SW1305A
3.5 x 3.5 mm (h=1.6 mm) Type White LED
Special Notice to Customers Using the Products and
Technical Information Shown in This Data Sheet
1) The technical information shown in the data sheets are limited to the typical characteristics and circuit
examples of the referenced products. It does not constitute the warranting of industrial property nor the
granting of any license.
2) For the purpose of product improvement, the specifications, characteristics and technical data described in
the data sheets are subject to change without prior notice. Therefore it is recommended that the most
updated specifications be used in your design.
3) When using the products described in the data sheets, please adhere to the maximum ratings for operating
voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any
damage which may occur if these specifications are exceeded.
4) The products that have been described to this catalog are manufactured so that they will be used for the
electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home
appliance and measuring instrument).
The application of aircrafts, space borne application, transportation equipment, medical equipment and
nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong
operation might influence the life or the human body. Please consult us beforehand if you plan to use our
product for the usages of aircrafts, space borne application, transportation equipment, medical equipment
and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV
machine, home appliance and measuring instrument.
5) In order to export the products or technologies described in this data sheet which are under the
“Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the
Japanese government.
6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley
Electric Co., Ltd.
7) The most updated edition of this data sheet can be obtained from the address below:
http://www.stanley-components.com
Page 14
2009.1.26
相关型号：
SW14-04-T-S-250-150
14 CONTACT(S), MALE, STRAIGHT BOARD STACKING CONNECTOR, SOLDER, ROHS COMPLIANT
SAMTEC
©2020 ICPDF网 联系我们和版权申明