CXOM4NSM3-300.0K,H1BA
更新时间:2024-09-19 00:15:32
品牌:STATEK
描述:CMOS Output Clock Oscillator, 0.3MHz Nom, CERAMIC, MINIATURE PACKAGE-4
CXOM4NSM3-300.0K,H1BA 概述
CMOS Output Clock Oscillator, 0.3MHz Nom, CERAMIC, MINIATURE PACKAGE-4
CXOM4NSM3-300.0K,H1BA 数据手册
通过下载CXOM4NSM3-300.0K,H1BA数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载MILITARY PRODUCTS
HIGH FREQUENCY OSCILLATORS WITH
STANDARD MILITARY TESTING
E
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com
OVERVIEW
For over 35 years, Statek has supported military programs with both standard products (normally purchased without a drawing and
without modifications or special testing) and specialized products (normally purchased to a drawing and requiring modifications or
special testing). For those desiring standard products (not governed by a source control document) but still desiring construction
and testing to military standards, Statek offers a portfolio of oscillators manufactured and tested to MIL-PRF-55310, Product
Level B. Because of our dedication to servicing specialized needs and continued support of the military market over the years,
Statek is a preferred supplier to a number of major defense contractors.
GUIDELINES FOR MILITARY PRODUCTS
Materials
Statek uses only the highest quality materials from carefully selected suppliers. Whenever possible, we use domestic suppliers
and try to cultivate a long-term relationship to provide stable sources of high-quality materials. Statek’s incoming inspection
assures compliance to our requirements. We manufacture our crystals with ultra-pure synthetically grown alpha-quartz bars.
(Swept quartz is also available, e.g., for applications requiring radiation hardness.) To simplify and minimize the device circuitry,
we use oscillator-dedicated integrated circuits. Lastly, we design our own ceramic packages, which are then manufactured for us
by our package supplier.
Assembly
Statek optimizes its manufacturing process to guarantee high quality. Our time-proven assembly process includes many
proprietary techniques to ensure robust parts suitable for the harshest environments. All military oscillators are inspected to
MIL-STD-883 prior to seal.
Testing
In order to meet COTS (commercial-off-the-shelf) requirements, Statek offers oscillators meeting the testing requirements of
MIL-PRF-55310 Product Level B. However, Statek gladly accepts fully customized testing to meet your needs; just contact us
with your requirements.
Continuity
Statek offers the continuity of support required for long-term military programs. We maintain records so that we can trace each
delivery back through its manufacturing history. Statek also has production redundancy and an established Business Continuity
Plan, which will allow us to recover in the event of an unforeseen occurrence.
Quality Assurance
Statek uses the ISO 9001:2000 process approach model and plans its continual improvements in order to achieve total customer
satisfaction.
IN-HOUSE TEST CAPABILITIES FOR OSCILLATORS: (INCLUDE BUT NOT LIMITED TO)
Aging (Elevated Temp) . . . . . . . . . . . . . . . . . . . . . . . . . . . .(MIL-PRF-55310, Paragraph 4.8.35)
Burn-in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(MIL-PRF-55310, Table III)
Die Shear Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(MIL-STD-883, Method 2019)
Fine/Gross Leak Testing . . . . . . . . . . . . . . . . . . . . . . . . .(MIL-STD-883, Method 1014; MIL-STD-202, Method 112)
Lead Integrity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(MIL-STD-883, Method 2004)
Mechanical Shock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(MIL-STD-883, Method 2002)
Moisture Resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(MIL-STD-202, Method 106)
PIND (Particle Impact Noise Detection) . . . . . . . . . . . . . . .(MIL-STD-883, Method 2020; MIL-STD-202, Method 217)
Salt Atmosphere . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(MIL-STD-883, Method 1009)
Solderability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(MIL-STD-883, Method 2003)
Temperature Cycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(MIL-STD-883, Method 1010)
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(MIL-PRF-55310, Paragraph 1.2.1.3, Table III)
Thermal Shock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(MIL-STD-202, Method 107)
Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(MIL-STD-202, Method 204)
Wirebond Pull Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(MIL-STD-883, Method 2023)
PRODUCT FAMILY DESCRIPTIONS
Statek’s high-frequency military grade oscillators are designed specifically to meet the demanding
requirements of today’s precision military applications.
The CXO oscillator is compatible with
conventional soldering, epoxy attachment and
wirebonding. It has high shock resistance and
excellent long-term reliability.
The HGXO is a miniature surface mount
oscillator that can survive extremely high shocks
up to 100,000 g. In addition, due to its design
and construction, it is available in tighter
frequency calibrations than Statek’s other
oscillators.
The CXOX oscillator is a miniaturized version
of the CXOM, with a low profile ceramic
package and one of the smallest footprints
available in the industry.
The LXOAT and LXOMAT are thru-hole
oscillators.
The CXOHG, CXOMHG and CXOXHG
oscillators are high-shock versions of the CXO,
CXOM and CXOX oscillators that can survive
shocks up to 10,000 g (and higher if required.)
For applications requiring other types of
crystals, oscillators, or sensors, please contact
the factory.
MILITARY PROGRAM
PARTICIPATION
MILITARY APPLICATIONS
AMRAAM (Advanced Medium-Range Air to Air Missile)
ASRAAM (Advance Short-Range Air to Air Missile)
CSEL (Combat Survivor Evader Locator)
DAS (Distributed Aperture System)
ERGM (Extended Range Guided Munitions)
EXCALIBER (Next Generation Fuze)
JASSM (Joint Air to Surface Standoff Missile)
JCM (Joint Common Missile)
Smart Munitions
Airborne Communication Systems
Battlefield Simulation
Portable Field Equipment
Projectile Electronics
Robust Computing Platform
Telemetry
JTRS (Joint Tactical Radio System)
JSF (Joint Strike Fighter)
Navigation
GPS
LGB (Laser Guided Bomb)
MRM (Medium Range Munition)
PAC-3 (Patriot Advanced Capabilities)
PREDATOR (Hand-Held Missile)
SFW (Sensor Fuzed Weapons)
WCMD (Wind Corrected Munitions Dispenser)
MAXIMUM RATINGS
Supply Voltage VDD
Storage Temperature
-0.5 V to 7.0 V
-55OC to +125OC
ENABLE/DISABLE OPTIONS (E/T/N)
Statek offers three enable/disable options: E, T, and N. Both the E-version and T-version have Tri-State outputs and
differ in whether the oscillator continues to run internally when the output is put into the high Z state: it stops in the
E-version and continues to run in the T-version. So, the E-version offers very low current consumption when the oscillator
is disabled and the T-version offers very fast output recovery when the oscillator is re-enabled. The N-version does not
have PIN 1 connected internally and so has no enable/disable capability. The following table summarizes the three
options.
SUMMARY OF ENABLE/DISABLE OPTIONS E/T/N
E
T
N
When enabled (PIN 1 is high*)
Output
Freq. output
Oscillates
Normal
Freq.output
Oscillates
Normal
Freq. output
Oscillates
Normal
Oscillator
Current consumption
When disabled (PIN 1 is low)
Output
High Z state
Stops
High Z state
Oscillates
Freq. output
Oscillates
Normal
Oscillator
Current consumption
Very low
Lower than normal
When re-enabled (PIN 1 changes from low to high)
Output recovery Delayed
Immediate
N/A
* When PIN 1 is allowed to float, it is held high by an internal pull-up resistor.
3
2
2
3
0.275 (6.99)
E
DIMENSIONS
TYP.
MAX.
DIM
A
inches
0.400
0.180
0.051
0.340
0.125
0.050
mm
10.16
4.57
1.30
8.64
3.18
1.27
inches
0.405
0.190
0.055
0.350
0.135
0.060
mm
10.29
4.83
1.40
8.89
3.43
1.52
TOP
A
D
BOTTOM
0.130 (3.30)
0.070 (1.78)
0.060 (1.52)
CXO/
CXOHG
B
C*
D
4
1
1
F
4
B
C
E
F
PIN CONNECTIONS
0.140 (3.56)
0.135 (3.43)
GRID
PLACEMENT
COURTYARD
* SM1 Termination
1. Enable/Disable (E or T) or not connected (N)
2. Ground
3. Output
4. VDD
G
DIMENSIONS
0.060 (1.52)
0.040 (1.02)
TYP.
MAX.
D
D
2
1
3
4
DIM
A
inches
0.295
0.197
0.089
0.055
0.040
0.240
0.100
mm
inches
0.302
0.204
0.098
mm
0.075 (1.91)
0.165 (4.19)
7.50
5.00
2.25
1.40
1.02
6.10
2.54
7.68
5.18
2.50
A
F
TOP
B
C*
D
0.240 (6.10)
HGXO
B
C
E
E
F
PIN CONNECTIONS
G
1. Enable/Disable (E or T) or not connected (N)
GRID
PLACEMENT
COURTYARD
* SM1 Termination
0.100 (2.54)
2. Ground
3. Output
4. VDD
inches (mm)
SPECIFICATIONS Specifications are typical at 25OC unless otherwise noted. Specifications are subject to change without notice.
SURFACE MOUNT PRODUCTS
CXO/CXOHG
CXOM/CXOMHG
CXOX/CXOXHG
0
3
M
G
3
0
M
9
1
.
4
M
0
6
T
Frequency Range
300 kHz to 120 MHz (up to 220 MHz for 3.3V) 300 kHz to 120 MHz (up to 220 MHz for 3.3V) 1 MHz to 160 MHz
Supply Voltage
1.8 V to 5.0 V
1.8 V to 5.0 V
1.8 V to 5.0 V
+
+
+
+
+
+
Standard Calibration Tolerances1
+_ 25 ppm, _ 50 ppm, _ 100 ppm
+_ 25 ppm, _ 50 ppm, _ 100 ppm
+_ 25 ppm, _ 50 ppm, _ 100 ppm
+
+
+
+
Frequency Stability Over Temp. Range 2 _ 25 ppm to _ 100 ppm
+_ 25 ppm to _ 100 ppm
+_ 25 ppm to _ 100 ppm
5.0 V
3.3 V
5.0 V
3.3 V
5.0 V
3.3 V
Supply Current (Typical)
13 mA for 50 MHz
12 mA for 40 MHz
10 mA for 32 MHz
8 mA for 24 MHz
6 mA for 50 MHz
5.5 mA for 40 MHz
5 mA for 32 MHz
3 mA for 24 MHz
14 mA for 50 MHz
12 mA for 40 MHz
10 mA for 30 MHz
8 mA for 24 MHz
10 mA for 50 MHz
8 mA for 40 MHz
6 mA for 30 MHz
4 mA for 24 MHz
13 mA for 50 MHz
12 mA for 40 MHz
10 mA for 32 MHz
8 mA for 24 MHz
6 mA for 50 MHz
5.5 mA for 40 MHz
5 mA for 320 MHz
3 mA for 24 MHz
Output Load (CMOS) 3
Start-up Time
15 pF
15 pF
15 pF
5 ms MAX
5 ms MAX
5 ms MAX
Rise/Fall Time
3 ns TYP, 6 ns MAX
40% MIN, 60% MAX
3 ns TYP, 6 ns MAX
40% MIN, 60% MAX
3 ns TYP, 6 ns MAX
40% MIN, 60% MAX
Duty Cycle1
Aging, first year
For high frequency oscillators, aging is dependent on frequency and
Shock, survival 4
3,000 g / 10,000 g, 0.3 ms, / sine
20 g, 10-2000 Hz swept sine
260OC for 20 seconds
3,000 g / 10,000 g, 0.3 ms, / sine
20 g, 10-2000 Hz swept sine
260OC for 20 seconds
5,000 g / 10,000 g, 0.3 ms, / sine
20 g, 10-2000 Hz swept sine
260OC for 20 seconds
1
2
1
1
2
2
Vibration, survival5
Maximum Process Temperature
1. Other tolerances available
2. Does not include calibration tolerance. Other tolerances available.
3. TTL loads and higher CMOS loads available. Contact Factory.
4. Higher shock version available.
5. Per MIL-STD-202G, Method 204D, Condition D. Random vibration testing also available.
NOTE: All combinations may not be available. All parameters are measured at an ambient temperature with a 10 M
Ω, 15 pF load.
DIMENSIONS
0.070 (1.78)
0.065 (1.65)
0.067 (1.70)
D
TYP.
MAX.
2
3
DIM
A
inches
0.256
0.197
0.051
0.055
0.060
mm
inches
0.263
0.204
0.055
mm
A
TOP
BOTTOM
6.50
5.00
1.30
1.40
1.52
6.68
5.18
1.40
1
4
B
CXOM/
D
C*
D
CXOMHG
0.201 (5.11)
0.136 (3.45)
B
C
E
E
0.070
1.78
* SM1 Termination
PIN CONNECTIONS
1. Enable/Disable (E or T) or not connected (N)
2. Ground
3. Output
4. VDD
GRID
PLACEMENT
COURTYARD
0.137 (3.48)
G
DIMENSIONS
F
E
DIM
A
inches
mm
20.57 MAX
H
I
J
0.810 MAX
0.510 MAX
0.300 0.005
0.600 0.005
0.430 TYP
B
C
D
E
12.95 MAX
7.62 0.13
15.24 0.13
10.92 TYP
6.10 MAX
1.02 TYP
A
PIN
NO.7
PIN
NO.1
D
LXOAT
C
B
F
0.240 MAX
0.040 TYP
PIN
NO.8
PIN
NO.14
G
H
I
0.150 MIN
3.81 MIN
PIN CONNECTIONS
0.018 0.002
0.070 TYP
0.46 0.05
1.78 TYP
1. Enable/Disable (E or T) or not connected (N)
J
7. Ground
8. Output
14. VDD
THRU-HOLE PRODUCTS
HGXO
LXOAT
LXOMAT
z
H
M
0
.
k
2
0
3
7
-
-
T
2
0
X
L
460 kHz to 50 MHz
250 kHz to 120 MHz (up to 220 MHz for 3.3V) 250 kHz to 120 MHz (up to 220 MHz for 3.3V)
1.8 V to 5.0 V
1.8 V to 5.0 V
1.8 V to 5.0 V
+
+
+
+
+
+
+_ 25 ppm, _ 50 ppm, _ 100 ppm
+_ 25 ppm, _ 50 ppm, _ 100 ppm
+_ 25 ppm, _ 50 ppm, _ 100 ppm
+
+
+
+_ 25 ppm to _ 100 ppm
+_ 25 ppm to _ 100 ppm
+_ 25 ppm to _ 100 ppm
5.0 V
3.3 V
5.0 V
3.3 V
5.0 V
3.3 V
14 mA for 50 MHz
12 mA for 40 MHz
10 mA for 30 MHz
8 mA for 24 MHz
10 mA for 50 MHz
8 mA for 40 MHz
6 mA for 30 MHz
4 mA for 24 MHz
14 mA for 50 MHz
12 mA for 40 MHz
10 mA for 30 MHz
8 mA for 24 MHz
10 mA for 50 MHz
8 mA for 40 MHz
6 mA for 30 MHz
4 mA for 24 MHz
14 mA for 50 MHz
12 mA for 40 MHz
10 mA for 30 MHz
8 mA for 24 MHz
10 mA for 50 MHz
8 mA for 40 MHz
6 mA for 30 MHz
4 mA for 24 MHz
15 pF
15 pF
15 pF
5 ms MAX
5 ms MAX
5 ms MAX
8 ns MAX
6 ns TYP, 10 ns MAX
40% MIN, 60% MAX
6 ns TYP, 10 ns MAX
40% MIN, 60% MAX
40% MIN, 60% MAX
d other design considerations. Please contact factory.
1
2
1
1
2
2
Up to 100,000 g, 0.5 ms, / sine
20 g, 10-2000 Hz swept sine
260OC for 20 seconds
1,000 g peak, 1 ms, / sine
20 g, 10-2000 Hz swept sine
175OC for 20 seconds
1,000 g peak, 1 ms, / sine
20 g, 10-2000 Hz swept sine
175OC for 20 seconds
DIMENSIONS
0.141 (3.6)
A
C
D
TYP.
MAX.
DIM
inches
0.126
0.099
0.039
mm
3.20
2.50
1.00
1.12
1.00
0.75
inches
0.136
0.107
0.043
0.048
0.041
0.031
mm
3.40
2.70
1.09
1.21
1.10
0.85
4
1
3
2
4
3
2
E
A
B
TOP
BOTTOM
B
CXOX/
0.110 (2.9)
0.031 (0.8)
C (SM1)
1
CXOXHG
C (SM3/SM5) 0.044
0.039 (1.05)
D
E
0.040
0.030
PIN CONNECTIONS
1. Output Enable/Disable (E) or no connection (N)
0.051
(1.3)
0.039
(1.0)
2. Ground
3. Output
4. VDD
inches (mm)
E
D
C
F
DIMENSIONS
H
G
DIM
A
inches
mm
PIN
NO.1
PIN
NO.4
0.505 MAX
0.300 0.005
0.430 TYP
0.225 MAX
0.025 MAX
0.150 MIN
0.018 0.002
0.063 TYP
12.83 MAX
7.62 0.13
10.92 TYP
5.72 MAX
0.64 MAX
3.81 MIN
B
C
B
A
LXOMAT
D
E
PIN
NO.8
PIN
NO.5
F
G
0.46 0.05
1.60 TYP
PIN CONNECTIONS
H
1. Enable/Disable (E or T) or not connected (N)
4. Ground
5. Output
8. VDD
PRODUCT LEVEL B TEST OPTIONS
MIL-STD
883 & 202
Methods
Sample Size
Test Options
Standard Testing includes: Internal Visual, Stabilization Bake, Seal Test,
B0
Electrical and Function Test
883 Method
Internal Visual (Pre-Seal)
2017 & 2032
1008, Cond C
1010, Cond B
100%
Stabilization Bake (150OC)
Temperature Cycling
100%
100%
100%
100%
2001, Cond A
Constant Acceleration
(5000g, Y1 Axis only)
B1
1014, Cond A1& C
Seal Test (Fine and Gross Leak)
Electrical and Function Test
Burn-in, operating (MIL-PRF-55310, Table III)
Final Electrical Test
---
---
---
100%
BA
100%
100%
BB
202 Method
As specified in
MIL-PRF-55310
Electrical Tests
Visual & Mechanical
Solderability
---
---
As specified in
MIL-PRF-55310
BC
As specified in
MIL-PRF-55310
208
As specified in
MIL-PRF-55310
Group B
30-day Age (MIL-PRF-55310, Para.4.7.1.5)
---
Vibration
204, Cond D
213, Cond I
107, Cond B
8 units
4 units
Shock
Thermal Shock
Ambient Pressure (MIL-PRF-55310, Para.4.8.46)
Storage Temperature (MIL-PRF-55310, Para.4.8.47)
---
---
Resistance to Soldering Heat
210, Cond B
2 units
2 units
Moisture Resistance
106
---
Salt Atmosphere (MIL-STD-883 Method 1009, Cond A)
Terminal Strength (as applicable)
Resistance to Solvents
211, Cond C
215
• The paragraph numbers listed in this table refer to MIL-PRF-55310, Revision D
• Please contact factory for a description of the standard “Electrical and Functional” battery of tests and the Statek internal visual test
• Sampling is performed as per MIL-PRF-55310 Table VI at this time
• Please contact factory for additional tests, including MIL-PRF-55310 Level S tests
HOW TO ORDER
CXOM
5
S
T
SM3
–
32.0M
,
A
1
BA
Enable/Disable Option SM3 = Solder Dipped
Frequency
K = kHz
M = MHz
Frequency/Temp Stability Codes
Test Options
“S” if special
or custom
design.
Accuracy @ 250C
A = 100 ppm
H = 50 ppm
F = 25 ppm
(Contact factory for
other tolerances.)
CXO
CXOHG
CXOM
CXOMHG
CXOX
CXOXHG
HGXO
Supply Voltage
1 = 1.8V
2 = 2.5V
3 = 3.0V
4 = 3.3V
1 = 100 ppm over -40OC to +85OC B0 = Standard Testing Only
E, T, or N
Blank otherwise
2 = 50 ppm over -40OC to +85OC
3 = 25 ppm over -40OC to +85OC
B1 = Screening (MIL-PRF-55310)
BA = Screening + Group A
HGXO
only
E and T are not
available in all
frequencies; contact
factory with specific
requirements.
Blank if Std.
4 = 100 ppm over -55OC to +125OC BB = Screening + Groups A & B
5 = 50 ppm over -55OC to +125OC BC = Screening + Groups A, B, & C
5 = 5.0V
Shock Level
A = 5,000 g
LXOAT
LXOMAT
B = 10,000 g
C = 20,000 g
D = 30,000 g
F = 50,000 g
G = 75,000 g
H = 100,000 g
512 N. Main Street
Orange, California
1449 Orange Grove
Orange, California
All products made in the USA.
10175 Rev C 08/08
E
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com
CXOM4NSM3-300.0K,H1BA 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
CXOM4NSM3-300.0K,H3B0 | STATEK | CMOS Output Clock Oscillator, 0.3MHz Nom, CERAMIC, MINIATURE PACKAGE-4 | 获取价格 | |
CXOM4TSM3-120.0M,A1BA | STATEK | CMOS Output Clock Oscillator, 120MHz Nom, CERAMIC, MINIATURE PACKAGE-4 | 获取价格 | |
CXOM4TSM3-120.0M,F3BA | STATEK | 暂无描述 | 获取价格 | |
CXOM4TSM3-220.0M,F2BA | STATEK | CMOS Output Clock Oscillator, 220MHz Nom, CERAMIC, MINIATURE PACKAGE-4 | 获取价格 | |
CXOM4TSM3-300.0K,F2B1 | STATEK | CMOS Output Clock Oscillator, 0.3MHz Nom, CERAMIC, MINIATURE PACKAGE-4 | 获取价格 | |
CXOM5ESM3-120.0M,A4B1 | STATEK | CMOS Output Clock Oscillator, 120MHz Nom, CERAMIC, MINIATURE PACKAGE-4 | 获取价格 | |
CXOM5ESM3-120.0M,A5BA | STATEK | CMOS Output Clock Oscillator, 120MHz Nom, CERAMIC, MINIATURE PACKAGE-4 | 获取价格 | |
CXOM5ESM3-120.0M,F1B0 | STATEK | CMOS Output Clock Oscillator, 120MHz Nom, CERAMIC, MINIATURE PACKAGE-4 | 获取价格 | |
CXOM5ESM3-120.0M,F1B1 | STATEK | CMOS Output Clock Oscillator, 120MHz Nom, CERAMIC, MINIATURE PACKAGE-4 | 获取价格 | |
CXOM5ESM3-300.0K,A5B0 | STATEK | CMOS Output Clock Oscillator, 0.3MHz Nom, CERAMIC, MINIATURE PACKAGE-4 | 获取价格 |
CXOM4NSM3-300.0K,H1BA 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6