CXOX2NSM5-160.0M,-/-/200/I [STATEK]

CMOS Output Clock Oscillator,;


型号：	CXOX2NSM5-160.0M,-/-/200/I
厂家：	STATEK CORPORATION
描述：	CMOS Output Clock Oscillator,
文件：	总2页 (文件大小：200K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

CXOX/CXOXHG OSCILLATOR

1 MHz to 160 MHz

Ultra-Miniature, High Stability

High Shock Crystal Oscillator

DESCRIPTION

Statek’s ultra miniature and ultra low profile

CXOX/CXOXHG oscillators consist of a CMOS/TTL

compatible hybrid circuit and a state-of-the-art, miniature,

fundamental-mode crystal.

DIMENSIONS

FEATURES

High shock resistance (HG version)

CMOS and TTL compatible

TOP

BOTTOM

Low power consumption

Full military testing available

Low acceleration sensitivity (HG version)

Optional Output Enable/Disable with Tri-State

Low EMI emission

TYPICAL

MAXIMUM

DIM

inches

0.126

0.099

0.039

inches

0.136

3.40

2.70

3.20

2.50

Hermetically sealed ceramic package

Designed and manufactured in the USA

0.107

C (SM1)

1.00

1.12

0.043

0.048

1.09

1.21

C (SM3/SM5) 0.044

0.040

0.030

1.00

0.75

0.041

0.031

1.10

0.85

APPLICATIONS

Military & Aerospace

Smart munitions

PIN CONNECTIONS

Communications

1. Output Enable/Disable (E) or no connection (N)

Navigation

2. Ground

3. Output

4. V_DD

GPS

Industrial, Computer & Communications

Miniature clock oscillator

Handheld instrumentation

PDA

SUGGESTED LAND PATTERN

0.141 (3.6)

Transponder/Animal migration

Medical

Test & diagnostic equipment

Handheld devices

0.110 (2.9)

0.031 (0.8)

0.039 (1.05)

0.051

(1.3)

0.039

(1.0)

inches (mm)

10168 Rev C

STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com

SPECIFICATIONS

ABSOLUTE MAXIMUM RATINGS

Specifications below are examples. Specifications are subject

to change without notice. Tighter specifications available.

Please contact factory.

Supply Voltage V_DD

Storage Temperature

-0.5 V to 7.0 V

-55^OC to 125^OC

Maximum Process Temperature 260^OC for 20 seconds

Frequency Range¹

Supply Voltage

Calibration Tolerance²

1 MHz to 160 MHz

1.8 V to 5.0 V 10%

ENABLE/DISABLE OPTIONS (E/N)

100 ppm

Statek offers two enable/disable options: E and N. The E-

version has a Tri-State output and stops oscillating internally

when the output is put into the high Z state. The N-version

does not have PIN 1 connected internally and so has no

enable/disable capability. The following table describes the

Enable/Disable option E.

Frequency Stability

Over Temperature³

50 ppm for Commercial

100 ppm for Industrial

100 ppm for Military

Supply Current (Typical)

24 MHz

1.8 V

3.3 V

5.0 V

8.0 mA

10.0 mA

13.0 mA

39.0 mA

1.5 mA 3.0 mA

2.0 mA 5.0 mA

3.0 mA 6.0 mA

32 MHz

50 MHz

130 MHz 12.0 mA 23.0 mA

Output Load (CMOS)⁴

ENABLE/DISABLE OPTION E

FUNCTION TABLE

15 pF

Start-up Time

Rise/Fall Time

Duty Cycle⁵

5 ms MAX

6 ns MAX

Enable (Pin 1 High*) Disable (Pin 1 Low)

40% MIN 60% MAX

5 ppm MAX

5,000 g, 0.3 ms, ¹/₂sine

HG: 10,000 g, 0.3 ms, ¹/₂sine`

Output

Frequency Output

Oscillates

High Z State

Stops

Aging, first year

Shock, survival⁶

Oscillator

Current

Normal

Very Low

Vibration, survival⁷

20 g, 10-2,000 Hz swept sine

* When PIN 1 is allowed to float, it is held high by an internal pull-up resistor.

Operating Temp. Range -10^OC to 70^OC (Commerical)

-40^OC to 85^OC (Industrial)

-55^OC to 125^OC (Military)

PACKAGING OPTIONS

1. Not all frequencies available at all voltages. Contact factory.

2. Tighter tolerances available.

3. Does not include calibration tolerances. Tighter tolerances available.

4. Higher CMOS loads and TTL loads available. Contact factory.

5. 45/55 available upon request in most cases.

CXOX/

CXOXHG

- Tray Pack

- 12 mm tape, 7” or 13” reels

Per EIA 481 (see Tape and Reel data sheet

#10109)

6. Higher shock version available. Contact factory for requirements above 10,000 g

7. Per MIL-STD-202G, Method 204D, Condition D. Random vibration testing also

available.

Note: All parameters are measured at ambient temperature with a 10 M1, 15 pF load.

HOW TO ORDER CXOX/CXOXHG SURFACE MOUNT CRYSTAL OSCILLATORS

CXOX

SM3

40.0M , 100

100

“S” if special or Enable/Disable Terminations

Frequency Calibration

Frequency

Stability over

Temp. Range

(in ppm)

Temp. Range:

= -10^OC to +70^OC

custom design.

Blank if Std.

Option

E or N

Blank = SM1

= Gold Plated

K = kHz

M = MHz

Tolerance

@ 25⁰C

(in ppm)

Supply Voltage

1 = 1.8 V

2 = 2.5 V

3 = 3.0 V

4 = 3.3 V

5 = 5.0 V

I = -40^OC to +85^OC

HG = High

Shock.

Otherwise

leave blank

(Lead Free)

SM3 = Solder Dipped

SM5 = Solder Dipped

(Lead Free)

M = -55^OC to +125^OC

= Customer Specified

200

Total

Frequency

Tolerance

(in ppm)

Temp. Range:

= -10^OC to +70^OC

I = -40^OC to +85^OC

M = -55^OC to +125^OC

= Customer Specified

10168 Rev C

STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com

相关型号：