CXOX4N-160.0M,100/50/-/M [STATEK]
CMOS Output Clock Oscillator,;型号: | CXOX4N-160.0M,100/50/-/M |
厂家: | STATEK CORPORATION |
描述: | CMOS Output Clock Oscillator, |
文件: | 总2页 (文件大小:200K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CXOX/CXOXHG OSCILLATOR
1 MHz to 160 MHz
Ultra-Miniature, High Stability
High Shock Crystal Oscillator
DESCRIPTION
Statek’s ultra miniature and ultra low profile
CXOX/CXOXHG oscillators consist of a CMOS/TTL
compatible hybrid circuit and a state-of-the-art, miniature,
fundamental-mode crystal.
DIMENSIONS
A
C
D
FEATURES
4
1
3
2
High shock resistance (HG version)
CMOS and TTL compatible
4
3
2
E
TOP
BOTTOM
B
Low power consumption
1
Full military testing available
Low acceleration sensitivity (HG version)
Optional Output Enable/Disable with Tri-State
Low EMI emission
TYPICAL
MAXIMUM
DIM
A
inches
0.126
0.099
0.039
mm
inches
0.136
mm
3.40
2.70
3.20
2.50
Hermetically sealed ceramic package
Designed and manufactured in the USA
B
0.107
C (SM1)
1.00
1.12
0.043
0.048
1.09
1.21
C (SM3/SM5) 0.044
D
E
0.040
0.030
1.00
0.75
0.041
0.031
1.10
0.85
APPLICATIONS
Military & Aerospace
Smart munitions
PIN CONNECTIONS
Communications
1. Output Enable/Disable (E) or no connection (N)
Navigation
2. Ground
3. Output
4. VDD
GPS
Industrial, Computer & Communications
Miniature clock oscillator
Handheld instrumentation
PDA
SUGGESTED LAND PATTERN
0.141 (3.6)
Transponder/Animal migration
Medical
Test & diagnostic equipment
Handheld devices
0.110 (2.9)
0.031 (0.8)
0.039 (1.05)
0.051
(1.3)
0.039
(1.0)
inches (mm)
10168 Rev C
E
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com
SPECIFICATIONS
ABSOLUTE MAXIMUM RATINGS
Specifications below are examples. Specifications are subject
to change without notice. Tighter specifications available.
Please contact factory.
Supply Voltage VDD
Storage Temperature
-0.5 V to 7.0 V
-55OC to 125OC
Maximum Process Temperature 260OC for 20 seconds
Frequency Range1
Supply Voltage
Calibration Tolerance2
1 MHz to 160 MHz
1.8 V to 5.0 V 10%
ENABLE/DISABLE OPTIONS (E/N)
100 ppm
Statek offers two enable/disable options: E and N. The E-
version has a Tri-State output and stops oscillating internally
when the output is put into the high Z state. The N-version
does not have PIN 1 connected internally and so has no
enable/disable capability. The following table describes the
Enable/Disable option E.
Frequency Stability
Over Temperature3
50 ppm for Commercial
100 ppm for Industrial
100 ppm for Military
Supply Current (Typical)
24 MHz
1.8 V
3.3 V
5.0 V
8.0 mA
10.0 mA
13.0 mA
39.0 mA
1.5 mA 3.0 mA
2.0 mA 5.0 mA
3.0 mA 6.0 mA
32 MHz
50 MHz
130 MHz 12.0 mA 23.0 mA
Output Load (CMOS)4
ENABLE/DISABLE OPTION E
FUNCTION TABLE
15 pF
Start-up Time
Rise/Fall Time
Duty Cycle5
5 ms MAX
6 ns MAX
Enable (Pin 1 High*) Disable (Pin 1 Low)
40% MIN 60% MAX
5 ppm MAX
5,000 g, 0.3 ms, 1/2 sine
HG: 10,000 g, 0.3 ms, 1/2 sine`
Output
Frequency Output
Oscillates
High Z State
Stops
Aging, first year
Shock, survival6
Oscillator
Current
Normal
Very Low
Vibration, survival7
20 g, 10-2,000 Hz swept sine
* When PIN 1 is allowed to float, it is held high by an internal pull-up resistor.
Operating Temp. Range -10OC to 70OC (Commerical)
-40OC to 85OC (Industrial)
-55OC to 125OC (Military)
PACKAGING OPTIONS
1. Not all frequencies available at all voltages. Contact factory.
2. Tighter tolerances available.
3. Does not include calibration tolerances. Tighter tolerances available.
4. Higher CMOS loads and TTL loads available. Contact factory.
5. 45/55 available upon request in most cases.
CXOX/
CXOXHG
- Tray Pack
- 12 mm tape, 7” or 13” reels
Per EIA 481 (see Tape and Reel data sheet
#10109)
6. Higher shock version available. Contact factory for requirements above 10,000 g
7. Per MIL-STD-202G, Method 204D, Condition D. Random vibration testing also
available.
Note: All parameters are measured at ambient temperature with a 10 M1, 15 pF load.
HOW TO ORDER CXOX/CXOXHG SURFACE MOUNT CRYSTAL OSCILLATORS
CXOX
HG
4
S
N
SM3
40.0M , 100
/
100
/
/
I
“S” if special or Enable/Disable Terminations
Frequency Calibration
Frequency
Stability over
Temp. Range
(in ppm)
Temp. Range:
C
= -10OC to +70OC
custom design.
Blank if Std.
Option
E or N
Blank = SM1
= Gold Plated
K = kHz
M = MHz
Tolerance
@ 250C
(in ppm)
Supply Voltage
1 = 1.8 V
2 = 2.5 V
3 = 3.0 V
4 = 3.3 V
5 = 5.0 V
I = -40OC to +85OC
HG = High
Shock.
Otherwise
leave blank
(Lead Free)
SM3 = Solder Dipped
SM5 = Solder Dipped
(Lead Free)
M = -55OC to +125OC
S
= Customer Specified
OR
/
/
200
Total
Frequency
Tolerance
(in ppm)
/
I
Temp. Range:
C
= -10OC to +70OC
I = -40OC to +85OC
M = -55OC to +125OC
S
= Customer Specified
10168 Rev C
E
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com
相关型号:
CXOX4N-40.0M,100/50/-/C
XO, Clock, CRYSTAL OSCILLATOR, CLOCK, 40 MHz, CMOS/TTL OUTPUT, LEAD FREE, HERMETIC SEALED, ULTRA-MINIATURE, SMD, 4 PIN
EUROQUARTZ
CXOX4N-40.0M,100/50/-/C
CMOS/TTL Output Clock Oscillator, LEAD FREE, HERMETIC SEALED, ULTRA-MINIATURE, SMD, 4 PIN
STATEK
CXOX4N-FREQ,100/100/-/I
CMOS/TTL Output Clock Oscillator, 1MHz Min, 160MHz Max, LEAD FREE, HERMETIC SEALED, ULTRA-MINIATURE, SMD, 4 PIN
EUROQUARTZ
CXOX4N-FREQ,100/100/-/M
XO, Clock, CRYSTAL OSCILLATOR, CLOCK, 1 MHz - 160 MHz, CMOS/TTL OUTPUT, LEAD FREE, HERMETIC SEALED, ULTRA-MINIATURE, SMD, 4 PIN
EUROQUARTZ
CXOX4N-SM3-40.0M,100/100/-/M
CMOS/TTL Output Clock Oscillator, 40MHz Nom, HERMETIC SEALED, ULTRA-MINIATURE, SMD, 4 PIN
STATEK
CXOX4N-SM3-40.0M,100/50/-/C
CMOS/TTL Output Clock Oscillator, 40MHz Nom, HERMETIC SEALED, ULTRA-MINIATURE, SMD, 4 PIN
STATEK
©2020 ICPDF网 联系我们和版权申明