首页 |元器件品牌

LSM3200.000KHZ(C/M) [STATEK]

Oscillator, 0.03MHz Min, 0.2MHz Max, 0.2MHz Nom, Hybrid;
LSM3200.000KHZ(C/M)
型号： LSM3200.000KHZ(C/M)
厂家： STATEK CORPORATION    STATEK CORPORATION
描述：

Oscillator, 0.03MHz Min, 0.2MHz Max, 0.2MHz Nom, Hybrid
文件： 总2页 (文件大小：37K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
LSM OSCILLATOR  
30 kHz to 200 kHz  
Low Power Surface Mount Crystal Oscillator  
TM  
DESCRIPTION  
actual size  
side view  
The LSM oscillator has the highest accuracy, stability and  
lowest current of all STATEK surface mount oscillators.  
The design consists of a hermetically-sealed CX-4  
STATEK crystal, and a CMOS-compatible integrated  
circuit. The hybrid design is hermetically-sealed with a  
kovar lid in a surface mount ceramic package. Permanent  
precision tuning of the oscillator is accomplished by laser  
trimming the crystal.  
PACKAGE DIMENSIONS  
2
1
3
4
FEATURES  
Low power consumption  
Low aging  
CMOS compatible  
Double hermetically sealed package  
Full military testing available  
3.3 Volt operation available  
Optional Tri-State  
F
TYP.  
INCHES  
MAX.  
DIM  
A
mm  
10.16  
4.57  
1.80  
5.08  
2.03  
1.27  
1.40  
INCHES  
mm  
10.29  
4.70  
2.00  
5.21  
2.16  
1.47  
1.60  
.400  
.180  
.071  
.200  
.080  
.050  
.055  
.405  
.185  
.079  
.205  
.085  
.058  
.063  
B
Low harmonic noise  
C*  
D
APPLICATIONS  
E
F
Industrial, Computer & Communications  
General purpose clock oscillator  
Data logger  
G
Termination material is Au over Ni (SM1), solder dip  
(SM3) also available.  
Remote sensor  
*SM1 Termination; SM3 = .084 in. (2.13mm) Max.  
Real Time Clock  
SUGGESTED LAND PATTERN  
Medical test and diagnostics  
Military  
GRID  
PLACEMENT  
COURTYARD  
Portable field communication  
Military high speed modem  
.075 [1.91]  
.068 [1.73]  
.064 [1.63]  
Flight recorder  
.132 [3.35]  
INCHES[mm]  
.200 [5.08]  
10151 - Rev B  
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com  
SPECIFICATIONS: LSM 32.768 kHz****  
o
ABSOLUTE MAXIMUM RATINGS  
Specifications are typical at 25 C unless otherwise noted.  
Supply Voltage V  
-0.3V to 7V  
DD  
Storage Temperature  
Process Temperature  
-55OC to +125OC  
260OC 20 sec.  
Specifications are subject to change without notice.  
+
_
Supply Voltage*  
5V 10% (3.3V available)  
+
A: _ .001% (10ppm)  
ELECTRICAL CHARACTERISTICS  
LSM 32.768 kHz  
Calibration Tolerance**  
+
B: _ .0025%  
All parameters are measured at ambient temperature  
with a 10M⍀ and 10pF load at 5V.  
+
C: _ .01%  
Frequency Stability***  
0OC to +50OC  
+_ 0.0025% Typ.  
+_ 25ppm  
SYMBOL PARAMETER  
MIN. TYP. MAX. UNIT  
+
+_ 0.004% MAX. _ 40ppm  
V
Output Voltage Hi  
Output Voltage Lo  
4.8  
4.95  
V
OH  
-20OC to+70OC  
Voltage Coefficient  
Aging  
+_ 0.007% Typ.  
+_ 70ppm  
V
OL  
0.05 0.2  
V
+_ 0.01% MAX. _ 100ppm  
+
tr  
tf  
Rise Time (10%-90%)  
Fall Time (10%-90%)  
12  
12  
50  
25  
25  
60  
nsec.  
nsec.  
%
+_ 1 ppm/ V Typ.  
+_ 3 ppm/ V MAX.  
SYM Duty Cycle  
40  
+_ 1 ppm/ year Typ.  
I
Supply Current  
DD  
+_ 3 ppm/ year MAX.  
V
DD =5V  
8.3 15  
5.5 10  
␮
A
A
Shock  
1000g, 1msec.,1/ 2 sine  
+_ 3 ppm MAX.  
V
DD =3.3V  
␮
Vibration  
10g rms, 10 -2000 Hz  
+_ 3 ppm MAX.  
PIN CONNECTIONS  
Pin  
1
Connection  
Output Enable or NC  
Ground  
Frequency Change vs  
+
10%Output Load Change _ 1 ppm MAX.  
Operating Temperature -10OC to +70OC Commercial  
2
-40OC to +85OC Industrial  
-55OC to +125OC Military  
3
Output  
4
V
DD  
* Contact the factory for lower voltage.  
** Tighter tolerances available.  
PACKAGING  
*** Does not include calibration tolerance. Positive variations small compared  
to negative variations (See data sheet 10103).  
LSM -Tray Pack (Standard)  
**** Contact the factory for other frequencies.  
-16mm tape, 7” or 13” reels (Optional)  
Per EIA 481 (see data sheet 10109)  
TYPICAL CURRENT CONSUMPTION, LSM-32.768 kHz  
OUTPUT WAVE FORM  
12  
10  
8
V
VOH  
DD  
90%*  
10%*  
6
V
OL  
4
2
3
4
5
6
0
7
t
r
t
f
V
DD (Volts)  
* Of V  
DD  
HOW TO ORDER LSM SURFACE MOUNT CRYSTAL OSCILLATORS  
LSM  
3
S
T
SM3  
32.768 kHz  
(
A
/
I
)
Frequency  
**Calibration  
Tolerance  
@ 25OC  
(A)  
Temp. Range:  
Blank= SM1 (Std.)  
SM1 = Gold Plated  
SM3 = Solder Dipped  
*T = Tri-State  
Blank = Pin 1  
no connection  
3=3.3V  
Blank=5V (Std.)  
“S” if special  
or custom  
design.  
C = Commercial  
I = Industrial  
M = Military  
Blank if Std.  
(B)  
S = Specify  
(C)  
Frequencies other than 32.768 kHz  
*Tri-state not available 100 kHz to 200 kHz  
**Other calibration fill in ppm  
+
_
A: 0.01%  
B: +_ 0.03%  
C: +_ 0.1%  
10151 - Rev B  
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com  

相关型号：

LSM320DLTR

 IC,ACCELERATION DETECTOR,LLCC,28PIN,PLASTIC
STMICROELECTR

LSM320HAY30

 MEMS motion sensor module: 3D digital accelerometer and 2D pitch and yaw analog gyroscope
STMICROELECTR

LSM320HAY30TR

 MEMS motion sensor module: 3D digital accelerometer and 2D pitch and yaw analog gyroscope
STMICROELECTR

LSM330.000KHZ(B/C)

 Oscillator, 0.03MHz Min, 0.2MHz Max, 0.03MHz Nom, Hybrid
STATEK

LSM330.000KHZ(B/I)

 Oscillator, 0.03MHz Min, 0.2MHz Max, 0.03MHz Nom, Hybrid
STATEK

LSM330.000KHZ(B/M)

 Oscillator, 0.03MHz Min, 0.2MHz Max, 0.03MHz Nom, Hybrid
STATEK

LSM330.000KHZ(C/I)

 Oscillator, 0.03MHz Min, 0.2MHz Max, 0.03MHz Nom, Hybrid
STATEK

LSM330.000KHZ(C/M)

 Oscillator, 0.03MHz Min, 0.2MHz Max, 0.03MHz Nom, Hybrid
STATEK

LSM330DL

 Linear sensor module 3D accelerometer sensor and 3D gyroscope sensor
STMICROELECTR

LSM330DLC

 iNEMO inertial module: 3D accelerometer and 3D gyroscope
STMICROELECTR

LSM330DLCTR

 iNEMO inertial module: 3D accelerometer and 3D gyroscope
STMICROELECTR

LSM330DLTR

 Linear sensor module 3D accelerometer sensor and 3D gyroscope sensor
STMICROELECTR
©2020 ICPDF网 联系我们和版权申明