LXOM-AT8N500KHZ(A/50PPM/200PPM/C) [STATEK]

CMOS/TTL Output Clock Oscillator, 0.5MHz Nom, HERMETIC SEALED, MINIATURE, METAL, DIP-8/4;
LXOM-AT8N500KHZ(A/50PPM/200PPM/C)
型号: LXOM-AT8N500KHZ(A/50PPM/200PPM/C)
厂家: STATEK CORPORATION    STATEK CORPORATION
描述:

CMOS/TTL Output Clock Oscillator, 0.5MHz Nom, HERMETIC SEALED, MINIATURE, METAL, DIP-8/4

文件: 总2页 (文件大小:55K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
LXOM-AT OSCILLATOR  
500 kHz to 120 MHz  
Low Power Crystal Oscillator  
DESCRIPTION  
The LXOM-AT consists of a TTL and CMOS-compatible  
hybrid circuit and a miniature quartz crystal packaged in a  
hermetically-sealed metal DIP. Permanent, precision tuning  
and a hermetically sealed AT quartz crystal allows for very tight  
calibration tolerance and eliminates the need for a tuning  
capacitor, a major source of long-term frequency drift.  
-32k  
2T  
FEATURES  
Low aging  
PACKAGE DIMENSIONS  
CMOS and TTL compatible  
Double hermetically sealed package  
Full military testing available  
3 Volt operation also available  
Optional Tri-State or Output Enable  
E
D
C
F
H
G
APPLICATIONS  
PIN  
NO.1  
PIN  
NO.4  
Industrial, Computer & Communications  
General purpose clock oscillator  
Military  
B
A
Flight recorder  
OUTPUT WAVE FORM  
PIN  
NO.8  
PIN  
NO.5  
VDD  
V
OH  
90%*  
10%*  
DIM  
A
INCHES  
mm  
12.83 MAX.  
0.505 MAX.  
+
_
+
_
B
0.300 0.005  
7.62 0.13  
V
OL  
C
0.430 TYP.  
0.225 MAX.  
0.025 MAX.  
0.150 MIN.  
10.92 TYP.  
5.72 MAX.  
0.64 TYP.  
3.81 MIN.  
0
D
t
r
t
f
* Of V  
DD  
E
F
+
_
+
_
G
0.018 0.002  
0.46 0.05  
PACKAGING  
H
0.063 TYP.  
1.60 TYP.  
* Position of bumps for reference only  
LXOM-AT - Tube Pack (Standard)  
10118 - Rev D  
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com  
SPECIFICATIONS  
ABSOLUTE MAXIMUM RATINGS  
o
Specifications are typical at 25 C unless otherwise noted.  
Specifications are subject to change without notice.  
Supply Voltage V  
-0.3V to 7V  
-55OC to +125OC  
DD  
Storage Temperature  
Supply Voltage (VDD)  
Calibration  
5V +_ 5% (3.3V available)  
TRUTH TABLE  
A:  
+_ 0.01% (100ppm)  
+_ 0.03%  
PIN 1*  
PIN 5  
Tolerance (@ 5V)*  
B:  
C :  
LXOM-AT-8E  
LXOM-AT-2E  
Low (0)  
High (1)  
Low (0)  
High (1)  
High (1)  
+_ 0.10%  
Freq. Output  
Low (0)  
+
+
Frequency -Temperature 0OC to +50OC from _ 5 to _ 30ppm  
Freq. Output  
High (Z)  
+
+
Stability*/**  
-10OC to +70OC from _ 10 to _ 50ppm  
LXOM-AT-10T Low (0)  
High (1)  
Freq. Output  
+
+
-40OC to +85OC from _ 20 to _ 100ppm  
* Normally high (internal pull-up resistor)  
+
+
O
O
_
-55 C to +125 C from 30 to _ 100ppm  
Supply Current  
Output Levels  
4 mA to 60 mA (Depending on freq.)  
ENABLE VS. TRI-STATE  
V
OL  
V
OH  
Enable: When pin 1 is low (0), the oscillator stops  
oscillation.  
TTL  
0.4V MAX.  
0.5V MAX.  
2.4V MIN.  
4.5V MIN.  
Tri-state: When pin 1 is low, the oscillator is running.  
However, the output buffer amplifier stops  
functioning and output is in high impedance  
(Z) state.  
CMOS  
Start-up Time  
Rise/ Fall Time  
Duty Cycle*  
5 msec. MAX.  
6 nsec. Typ., 10 nsec. MAX.  
40% Min., 60% MAX.  
Enable  
Low  
Tri-state  
High  
Current consumption  
when pin 1 is low  
Aging, first year  
Shock, survival  
Vibration survival  
5 ppm MAX.  
1,000g peak 1 msec., 1/ 2 sine  
10g rms 10-2000 Hz random  
Output recovery delay  
when pin 1 changes from  
low (0) to high (1)  
Delayed Immediate  
Operating Temperature -10OC to +70OC Commercial  
-40OC to +85OC Industrial  
-55OC to +125OC Military  
PIN CONNECTIONS  
Pin Connection  
-55OC to +125OC  
___  
Storage Temperature  
1. Output Enable, INH (Tri-State) or NC  
4. Ground  
5. Output  
* Tighter tolerances available for calibration, stability and duty cycle.  
** Does not include calibration tolerance.  
8.  
V
DD  
Note: All parameters are measured at ambient temperature  
with a 10Mand 10pF load at 5V  
HOW TO ORDER LXOM-AT CRYSTAL OSCILLATORS  
LXOM-AT  
S
10  
T
32 MHz  
(
100ppm  
/
100ppm  
/
200ppm  
/
I
)
Sif special  
or custom  
design.  
2 = 2 LS TTL Load  
8 = 8 TTL Load  
10 =10 TTL Load  
E = Enable  
T = Tri-State  
N = Neither  
Calibration  
Tolerance*  
@ 250C  
(A)  
Frequency  
Stability over  
Temp. Range  
Total Frequency  
Tolerance  
Temp. Range:  
C = Commercial  
I = Industrial  
M = Military  
Blank if Std.  
(B)  
(C)  
S = Specify  
Frequency  
* Other calibration fill in ppm  
10118 - Rev D  
STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com  

相关型号:

LXOM-AT8T0.5MHZ(C/100/200/I)

CMOS Output Clock Oscillator
EUROQUARTZ

LXOM-AT8T0.5MHZ(C/100/200/M)

CMOS Output Clock Oscillator
EUROQUARTZ

LXOM-AT8T120MHZ(A/100/200/M)

CMOS Output Clock Oscillator
EUROQUARTZ

LXOM-AT8T120MHZ(A/50/200/C)

CMOS Output Clock Oscillator
EUROQUARTZ

LXOM-AT8T120MHZ(A/50PPM/200PPM/C)

CMOS/TTL Output Clock Oscillator, 120MHz Nom, HERMETIC SEALED, MINIATURE, METAL, DIP-8/4
STATEK

LXOM-AT8T120MHZ(C/100/200/I)

CMOS Output Clock Oscillator
EUROQUARTZ

LXOM-AT8T32MHZ(A/100/200/I)

CMOS Output Clock Oscillator
EUROQUARTZ

LXOM-AT8T32MHZ(B/50PPM/200PPM/C)

CMOS/TTL Output Clock Oscillator, 32MHz Nom, HERMETIC SEALED, MINIATURE, METAL, DIP-8/4
STATEK

LXOM-AT8T500KHZ(A/50PPM/200PPM/C)

CMOS/TTL Output Clock Oscillator, 0.5MHz Nom, HERMETIC SEALED, MINIATURE, METAL, DIP-8/4
STATEK

LXOMAT1ESM3-120.0M,A3B1

CMOS Output Clock Oscillator, 120MHz Nom
STATEK

LXOMAT1ESM3-120.0M,F3B1

CMOS Output Clock Oscillator, 120MHz Nom
STATEK

LXOMAT1ESM3-250.0K,F1BB

CMOS Output Clock Oscillator, 0.25MHz Nom
STATEK