TS206-350.000K500/I [STATEK]

Parallel - Fundamental Quartz Crystal,;


型号：	TS206-350.000K500/I
厂家：	STATEK CORPORATION
描述：	Parallel - Fundamental Quartz Crystal,
文件：	总2页 (文件大小：191K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

TS Series

Miniature Quartz

Temperature Sensor

160 kHz to 350 kHz

DESCRIPTION

TS1

TS2

The TS Quartz Temperature Sensors are tuning-fork quartz

crystals vibrating in a torsional mode. They are designed so

that their frequency is both extremely sensitive to

temperature and highly linear. For example, the 172.0 kHz

design has a sensitivity of roughly +46.4 ppm/^OC. This high

sensitivity offers the ability to detect fine changes in

temperature; the degree depending on the implementation.

Further, this frequency-based technique has the advantage

of being immune to amplitude noise in the measurement

system; a feature not shared by thermocouple, thermistor,

or RTD based temperature sensing techniques. Lastly,

remote temperature sensing is possible by using an antenna

to pick up the frequency of the EM waves emitted by the

sensor.

TS3

TS6

TS1 AND TS2 AVAILABLE WITH THE

FOLLOWING LEAD CONFIGURATIONS:

03 & 06

(TS1 & TS2)

(TS2 only)

04 & 07

(TS2 only)

FEATURES

Frequency-based sensing

High shock resistance

Low aging

DIMENSIONS

Designed and manufactured in the USA

For detailed dimensions and lead spacing see

Statek CX1 (10121), CX1 (10101), CX1-CX2

(10202), CX2 (10134), CX2 (10138), CX3

(10104), and CX6 (10132) data sheets.

APPLICATIONS

High resolution temperature measurement

Temperature-critical process control/monitoring

Wireless temperature measurement

Human health monitoring

SMD TERMINATIONS

Designation Termination

SM1

SM2

SM3

SM4

SM5

Gold Plated

Solder Plated

Solder Dipped

Solder Plated (Lead Free)

Solder Dipped (Lead Free)

10162 - Rev B

STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com

SPECIFICATIONS

FREQUENCY VS. TEMPERATURE

Specifications are typical at 25^OC unless otherwise noted.

Specifications are subject to change without notice. Tighter

specifications available. Please contact factory.

262.144 kHz Frequency vs. Temperature Curve

2500

2000

1500

1000

500

TYPICAL PARAMETERS

Parameters will vary according to frequency.

Standard Frequencies¹

172.0 kHz

262.144 kHz

Standard Calibration

Tolerances²

200 ppm (0.02%) 200 ppm (0.02%)

500 ppm (0.05%) 500 ppm (0.05%)

10000 ppm (1.0%) 10000 ppm (1.0%)

-500

-1000

-1500

-2000

-2500

Load Capacitance

Quality Factor Q

5 pF

4 pF

170,000

0.3 fF

130,000

0.3 fF

Motional Capacitance C₁

Motional Resistance R₁³

Shunt Capacitance C₀

Drive Level

kΩ

5 kΩ

1.4 pF

1.0 pF

-35

-15

Temperature [°C]

0.5 µ

0.5 µW

Aging, first year⁴

3 ppm MAX

3 ppm MAX.

5,000 g

STANDARD FREQUENCIES

Shock, Survival

5,000 g

172.0 kHz, 190.5 kHz, 262.144 kHz, 300.0 kHz,

325.0 kHz, and 350.0 kHz.

Vibration, Survival

Max Process Temperature⁵

20 g, 10-2,000 Hz swept sine

Surface Mount: 260^OC for 20 sec.

Thru-hole: 1) 175^OC for 10 sec.

PACKAGE HANDLING THRU-HOLE

2) 200^OC for 10 sec. (06HT & 07HT only)

1) Lead to package solder interface temperature should

not exceed 175^OC. (02, 03 & 04)

1. Other frequencies available. Please contact factory.

2. Other calibration tolerances available. Please contact factory.

3. Motional resistance varies with temperature.

2) Take proper soldering consideration as the melting

temperature of the lead-attach solder is 217^OC. (06 &

07 only)

4. Aging data from similar quartz oscillator crystal.

5. For detailed information refer to Tech Note 27. HT (High Temp. Lead-Package Attach Solder)

FREQUENCY-TEMPERATURE MODEL

Although the frequency-temperature characteristic of the TS sensor is nearly linear, it is not exactly so. A better model is a

second-order polynomial in temperature:

F(T) = F (T₀) [1 + α (T - T₀) + β (T - T₀)²]

While higher-order polynomial models are possible, a second-order model is usually sufficient. Taking T₀= 25^OC, typical values

for α and β are as follows:

Frequency

kHz

ppm/^OC

ppm/^OC²

172.000

262.144

46.4

34.5

0.036

0.018

HOW TO ORDER TS TEMPERATURE SENSORS

TS2

SM1

262.144K

200

Blank = Glass Lid

C = Ceramic Lid

End Lead

Side Lead

Half-Side Lead

Side Lead (HT)

Half Side Lead (HT)

Frequency

K = kHz

TS1 = CX1 Leaded & SMD

TS2 = CX2 Leaded & SMD

TS3 = CX3 SMD only

Calibration

Tolerance

@ 25^OC

Operating Temp. Range:

“S” if special or

custom design.

Blank if Std.

= -10^OC to +70^OC

= -40^OC to +85^OC

M = -55^OC to +125^OC

TS6 = CX6 SMD only

(in ppm)

= Customer Specified

SM1 = Gold Plated (Lead-free)

SM2 = Solder Plated

SM3 = Solder Dipped

SM4 = Solder Plated

(Lead-free)

SM5 = Solder Dipped

(Lead-free)

10162 - Rev B

STATEK CORPORATION 512 N. MAIN ST., ORANGE, CA 92868 714-639-7810 FAX: 714-997-1256 www.statek.com

相关型号：