BTA08-400CRG [STMICROELECTRONICS]
TRIAC,400V V(DRM),8A I(T)RMS,TO-220;
| 型号： | BTA08-400CRG |
| 厂家： | 
ST |
| 描述： | TRIAC,400V V(DRM),8A I(T)RMS,TO-220 栅 三端双向交流开关 栅极 |
| 文件： | 总18页 (文件大小：615K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
BTA08, BTB08, T810, T835, T850
Snubberless™, logic level and standard 8 A Triacs
Datasheet - production data
Features
On-state rms current, IT(RMS) 8 A
Repetitive peak off-state voltage, VDRM
VRRM 600 V to 800 V
/
Triggering gate current, IGT (Q1) 5 to 50 mA
Description
Available either in through-hole and surface-
mount packages, these devices are suitable for
general purpose AC switching. They can be used
as an ON/OFF function in applications such as
static relays, heating regulation, induction motor
starting circuits or for phase control operation in
light dimmers and motor speed controllers, etc.
The Snubberless versions (BTA, BTB08_xxxxW
and T8 series) are specially recommended for
use on inductive loads, thanks to their high
commutation performance.
Logic level versions are designed to interface
directly with low power drivers such as
Microcontrollers.
By using an internal ceramic pad, the BTA series
provide voltage insulated tab (rated at 2500 VRMS
in compliance with UL standards (file ref.:
E81734).
)
April 2017
DocID7472 Rev 12
1/18
www.st.com
This is information on a product in full production.
Characteristics
BTA08, BTB08, T810, T835, T850
1
Characteristics
Table 1: Absolute maximum ratings (Tj = 25 °C unless otherwise stated)
Symbol
Parameter
Value
Unit
IPAK, DPAK,
TO-220AB,
D²PAK
Tc = 110 °C
RMS on-state current
(full sine wave)
IT(RMS)
8
A
TO-220ABIns.
f = 50 Hz
Tc = 100 °C
t = 20 ms
Non repetitive surge peak
on-state current
(full cycle, Tj initial = 25 °C)
80
84
36
ITSM
A
f = 60 Hz
tp = 16.7 ms
tp = 10 ms
I2t
I2t value for fusing
A2s
Critical rate of rise of on-state
current IG = 2 x IGT, tr ≤ 100 ns
dl/dt
f = 120 Hz
tp = 20 µs
Tj = 125 °C
50
A/µs
IGM
PG(AV)
Tstg
Peak gate current
Tj = 125 °C
Tj = 125 °C
4
A
Average gate power dissipation
Storage junction temperature range
1
W
°C
°C
-40 to +150
-40 to +125
Tj
Operating junction temperature range
Table 2: Electrical characteristics (Tj = 25 °C, unless otherwise specified) Snubberless and
logic level (3 quadrants)
T8
35
BTA08/BTB08
Symbol
Parameter
Quadrant
Unit
10
Max. 10
Max.
50
TW SW CW
BW
(1)
IGT
I - II - III
I - II - III
35
50
5
10
35
50
mA
V
VD = 12 V,
RL = 30 Ω
VGT
VGD
1.2
VD = VDRM
,
RL = 3.3 kΩ,
I - II - III
Min.
0.2
V
Tj = 125 °C
(2)
IH
IT = 100 mA
Max. 15
Max. 25
Max. 30
35
50
60
50
70
80
10
10
15
15
25
30
35
50
60
50
70
80
mA
mA
I - III
II
IL
IG = 1.2 x IGT
VD = 67% VDRM
gate open, Tj = 125 °C
,
dV/dt
Max. 40 400 1000 20
40
400 1000 V/µs
(dV/dt)c = 0.1 V/µs,
Tj = 125 °C
Min. 5.4
Min. 2.8
Min.
3.5
5.4
(dV/dt)c = 10 V/µs,
Tj = 125 °C
(dl/dt)c
1.5 2.98
A/ms
Without snubber,
Tj = 125 °C
4.5
7
4.5
7
Notes:
(1)Minimum IGT is guaranteed at 5 % of IGT max.
(2)For both polarities of A2 referenced to A1
2/18
DocID7472 Rev 12
BTA08, BTB08, T810, T835, T850
Symbol
Characteristics
Table 3: Standard (4 quadrants)
BTA08/BTB08
Parameter
Quadrant
Unit
C
B
I - II - III
IV
25
50
50
(1)
IGT
Max.
mA
VD = 12 V, RL = 33 Ω
100
VGT
VGD
All
Max.
Min.
Max.
1.3
0.2
V
V
VD = VDRM, RL = 33 Ω, Tj = 125 °C
All
(2)
IH
IT = 500 mA
25
40
80
200
5
50
50
mA
I - III - IV
II
IL
IG = 1.2 IGT
Max.
mA
100
400
10
dV/dt(2)
VD = 67 % VDRM gate open, Tj = 125 °C
Min.
Min.
(dI/dt)c(2) (dI/dt)c = 5.3 A/ms, Tj = 125 °C
V/µA
Notes:
(1) Minimum IGT is guaranteed at 5 % of IGT max.
(2) For both polarities of A2 referenced to A1
Table 4: Static electrical characteristics
Test conditions
Symbol
Value
1.55
0.85
50
Unit
V
(1)
VTM
ITM = 11 A, tp = 380 µs
Tj = 25 °C
Tj = 125 °C
Tj = 125 °C
Tj = 25 °C
Tj = 125 °C
Max.
Max.
Max.
Max.
Max.
(1)
threshold on-state voltage
Dynamic resistance
VTO
V
(1)
RD
mΩ
µA
mA
5
VDRM = VRRM
IDRM IRRM
1
Notes:
(1)For both polarities of A2 referenced to A1
Table 5: Thermal resistance
Parameter
Symbol
Value Unit
IPAK / D2PAK / DPAK / TO-220AB
TO-220AB Insulated
1.6
°C/W
2.5
Max. junction to case thermal
resistance (AC)
Rth(j-c)
S(1) = 1 cm² D²PAK
45
Junction to
ambient
S = 1 cm²
DPAK
70
Rth(j-a)
°C/W
60
TO-220AB / TO-220AB Insulated
IPAK
Junction to ambient
100
Notes:
(1)S = Copper surface under tab
DocID7472 Rev 12
3/18
Characteristics
BTA08, BTB08, T810, T835, T850
1.1
Characteristics (curves)
Figure 1: Maximum power dissipation versus
on-state RMS current (full cycle)
Figure 2: RMS on-state current versus temperature
(full cycle)
Figure 3: RMS on-state current versus ambient
temperature (full cycle)
Figure 4: Relative variation of thermal impedance
versus pulse duration
Figure 5: On-state characteristics
(maximum values)
Figure 6: Surge peak on-state current versus
number of cycles
ITSM(A)
90
80
t = 16.66 ms
70
Non repetitive
One cycle
Tj initial = 25 °C
60
50
40
30
20
10
0
Repetitive
TC = 110 °C
Number of cycles
1000
1
10
100
4/18
DocID7472 Rev 12
BTA08, BTB08, T810, T835, T850
Figure 7: Non repetitive surge peak on-state
Characteristics
Figure 8: Relative variation of gate trigger current
current for a sinusoidal pulse (tp < 10 ms)
Figure 9: Relative variation of critical rate of
decrease of main current versus (dV/dt)c
(typical values)
Figure 10: Relative variation of critical rate of
decrease of main current versus (dV/dt)c
(typical values)
Figure 11: Relative variation of critical rate of
decrease of main current versus junction
temperature
Figure 12: DPAK and D2PAK thermal resistance
junction to ambient versus copper surface under
tab
DocID7472 Rev 12
5/18
Package information
BTA08, BTB08, T810, T835, T850
2
Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
Epoxy meets UL94, V0
Lead-free package
Recommended torque: 0.4 to 0.6 N·m
2.1
DPAK package information
Figure 13: DPAK package outline
6/18
DocID7472 Rev 12
BTA08, BTB08, T810, T835, T850
Package information
Table 6: DPAK package mechanical data
Dimensions
Ref.
Millimeters
Typ.
Inches(1)
Min.
Max.
2.40
1.10
0.23
0.90
5.46
0.61
0.60
6.22
5.60
6.73
5.50
Min.
Typ.
Max.
A
A1
A2
b
2.18
0.90
0.03
0.64
4.95
0.46
0.46
5.97
4.95
6.35
4.32
0.0858
0.0354
0.0012
0.0252
0.1949
0.0181
0.0181
0.2350
0.1949
0.2500
0.1701
0.0945
0.0433
0.0091
0.354
b4
c
0.2150
0.0240
0.0236
0.2449
0.2205
0.2650
0.2165
c2
D
D1
E
E1
e
2.29
0.0900
0.1732
0.3681
0.0394
0.1850
0.4094
0.0701
0.0500
0.0402
+8°
e1
H
4.40
9.35
1.00
4.70
10.40
1.78
1.27
1.02
+8°
L
L2
L4
V2
0.60
-8°
0.0236
-8°
Notes:
(1)Dimensions in inches are given for reference only
Figure 14: DPAK recommended footprint (dimensions are in mm)
DocID7472 Rev 12
7/18
Package information
BTA08, BTB08, T810, T835, T850
2.2
IPAK package information
Figure 15: IPAK package outline
This package drawing may slightly differ from the physical package. However, all
the specified dimensions are guaranteed.
8/18
DocID7472 Rev 12
BTA08, BTB08, T810, T835, T850
Package information
Table 7: IPAK package mechanical data
Dimensions
Ref.
Millimeters
Typ.
Inches(1)
Min.
Max.
2.40
1.10
0.90
0.95
5.43
Min.
Typ.
Max.
A
A1
b
2.20
0.90
0.64
0.0866
0.0354
0.0252
0.0945
0.0433
0.0354
0.0374
0.2138
b2
b4
B5
c
5.20
0.2047
0.30
0.0118
0.45
0.46
6.00
6.40
0.60
0.60
6.20
6.65
0.0177
0.0181
0.2362
0.2520
0.0236
0.0236
0.2441
0.2618
c2
D
E
e
2.28
0.0898
0.6339
e1
H
4.40
4.60
0.1732
0.1811
16.10
L
9.00
0.80
9.60
1.20
1.25
0.3545
0.0315
0.3780
0.0472
0.0492
L1
L2
V1
0.80
10°
0.0315
10°
Notes:
(1)Inch dimensions are for reference only.
DocID7472 Rev 12
9/18
Package information
BTA08, BTB08, T810, T835, T850
2.3
TO-220AB (NIns. and Ins.) package information
Figure 16: TO-220AB (NIns. & Ins.) package outline
10/18
DocID7472 Rev 12
BTA08, BTB08, T810, T835, T850
Package information
Table 8: TO-220AB (NIns. & Ins.) package mechanical data
Dimensions
Ref.
Millimeters
Typ.
Inches(1)
Typ.
Min.
Max.
Min.
Max.
A
a1
a2
B
15.20
15.90
0.5984
0.6260
3.75
0.1476
13.00
10.00
0.61
1.23
4.40
0.49
2.40
2.40
6.20
3.73
2.65
1.14
1.14
15.80
14.00
10.40
0.88
1.32
4.60
0.70
2.72
2.70
6.60
3.88
2.95
1.70
1.70
16.80
0.5118
0.3937
0.0240
0.0484
0.1732
0.0193
0.0945
0.0945
0.2441
0.1469
0.1043
0.0449
0.0449
0.6220
0.5512
0.4094
0.0346
0.0520
0.1811
0.0276
0.1071
0.1063
0.2598
0.1528
0.1161
0.0669
0.0669
0.6614
b1
b2
C
c1
c2
e
F
I
L
I2
I3
I4
16.40
2.6
0.6457
0.1024
M
Notes:
(1)Inch dimensions are for reference only.
DocID7472 Rev 12
11/18
Package information
BTA08, BTB08, T810, T835, T850
2.4
D²PAK package information
Figure 17: D²PAK package outline
12/18
DocID7472 Rev 12
BTA08, BTB08, T810, T835, T850
Package information
Table 9: D²PAK package mechanical data
Dimensions
Ref.
Millimeters
Inches(1)
Typ.
Min.
Typ.
Max.
4.60
2.69
0.23
Min.
Max.
A
A1
A2
A3
B
4.30
2.49
0.03
0.1693
0.0980
0.0012
0.1811
0.1059
0.0091
0.0098
0.25
0.70
1.25
0.45
1.21
8.95
7.50
1.30
2.54
10.00
8.30
6.85
4.88
15
0.93
1.7
0.0276
0.0492
0.0177
0.0476
0.3524
0.2953
0.0512
0.1
0.0366
0.0669
0.0236
0.0535
0.3681
0.3150
0.0669
B2
C
0.60
1.36
9.35
8.00
1.70
C2
D
D1
D2
e
E
10.28
8.70
7.25
5.28
15.85
2.28
1.40
1.75
0.3937
0.3268
0.2697
0.1921
0.5906
0.0701
0.0500
0.0551
0.4047
0.3425
0.2854
0.2079
0.6240
0.0898
0.0551
0.0689
E1
E2
G
H
L
1.78
1.27
1.40
L2
L3
R
0.0157
0.40
V2
0°
8°
0°
8°
Notes:
(1)Dimensions in inches are given for reference only
Figure 18: D²PAK recommended footprint (dimensions are in mm)
DocID7472 Rev 12
13/18
Ordering information
BTA08, BTB08, T810, T835, T850
3
Ordering information
Figure 19: Ordering information scheme (BTA08 and BTB08 series)
Figure 20: Ordering information scheme (T8 series)
T
8
10 - 600
B
(-TR)
Triac series
Current
08 = 8A
Sensitivity
10 = 10 mA
35 = 35 mA
Voltage
600= 600 V
800= 800 V
Package
B = DPAK
H = IPAK
G = D²PAK
Packing mode
Blank = Tube
TR = Tape and reel
14/18
DocID7472 Rev 12
BTA08, BTB08, T810, T835, T850
Part Number
Ordering information
Table 10: Product selector
Voltage (xxx)
Sensitivity
Type
Package
600
800
T810-xxxB
T835-xxxH
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
10 mA
35 mA
10 mA
35 mA
50 mA
10 mA
35 mA
50 mA
5 mA
Logic Level
Snubberless™
Logic Level
Snubberless™
Snubberless™
Logic Level
Standard
DPAK
IPAK
T810-xxxG
D2PAK
T835-xxxG
X
X
D2PAK
T850-6G
D2PAK
BTA08-xxxS
BTA08-xxxC
BTA08-xxxB
BTA08-xxxTW
BTA08-xxxSW
BTA08-xxxCW
BTA08-xxxBW
BTB08-xxxS
BTB08-xxxC
BTB08-xxxB
BTB08-xxxTW
BTB08-xxxSW
BTB08-xxxCW
BTB08-xxxBW
TO-220AB Ins.
TO-220AB Ins.
TO-220AB Ins.
TO-220AB Ins.
TO-220AB Ins.
TO-220AB Ins.
TO-220AB Ins.
TO-220AB
TO-220AB
TO-220AB
TO-220AB
TO-220AB
TO-220AB
TO-220AB
Standard
Logic Level
Logic Level
Snubberless™
Snubberless™
Logic Level
Standard
10 mA
35 mA
50 mA
10 mA
35 mA
50 mA
5 mA
X
Standard
X
X
Logic Level
Logic Level
Snubberless™
Snubberless™
10 mA
35 mA
50 mA
DocID7472 Rev 12
15/18
Ordering information
Order code
BTA08, BTB08, T810, T835, T850
Table 11: Ordering information
Marking
T8 1060
Package
Weight
Base qty.
Delivery mode
T810-600B
T835-600B
T8 3560
75
Tube
T835-800B
T8 3580
T810-600B-TR
T810-800B-TR
T835-600B-TR
T835-800B-TR
T835-600H
T8 1060
DPAK
0.30
T8 1080
2500
Tape&Reel 13"
T8 3560
T8 3580
T8 3560
IPAK
0.40
1.50
75
50
Tube
Tube
T835-600G
T835-600G
T850-6G
T850-6G
T810-600G-TR
T835-600G-TR
T850-6G-TR
T810-600G
T835-600G
T850-6G
D2PAK
1000
Tape&Reel 13"
BTA08-600SRG
BTA08-600BRG
BTA08-600CRG
BTA08-800CRG
BTA08-600BWRG
BTA08-600CWRG
BTA08-600SWRG
BTA08-600TWRG
BTA08-800BWRG
BTB08-600BRG
BTB08-600CRG
BTB08-600SRG
BTB08-600BWRG
BTB08-600CWRG
BTB08-600SWRG
BTB08-600TWRG
BTB08-800CWRG
BTB08-800TWRG
BTA08-600S
BTA08-600B
BTA08-600C
BTA08-800C
BTA08-600BW
BTA08-600CW
BTA08-600SW
BTA08-600TW
BTA08-800BW
BTB08-600B
BTB08-600C
BTB08-600S
BTB08-600BW
BTB08-600CW
BTB08-600SW
BTB08-600TW
BTB08-800CW
BTB08-800TW
TO-220AB Ins.
2.30
50
Tube
TO-220AB
16/18
DocID7472 Rev 12
BTA08, BTB08, T810, T835, T850
Revision history
4
Revision history
Table 12: Document revision history
Date
Revision Changes
Apr-2002
5A
6
Last update.
TO-220AB delivery mode changed from bulk to tube.
ECOPACK statement added.
13-Feb-2006
10-Mar-2010
02-Jun-2014
07-Nov-2016
7
Updated ECOPACK statement and Figure 26
Updated DPAK and IPAK package information and
reformatted to current standard.
8
9
Updated Table 1 and reformatted to current standard.
Updated Figure 20: "Ordering information scheme (T8 series)",
Table 10: "Product selector" and Table 11: "Ordering
information".
06-Jan-2017
10
09-Feb-2017
24-Apr-2017
11
12
Added T850 package information.
Updated Figure 6.
Minor text changes to improve readability.
DocID7472 Rev 12
17/18
BTA08, BTB08, T810, T835, T850
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST
products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the
design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2017 STMicroelectronics – All rights reserved
18/18
DocID7472 Rev 12
相关型号：
©2020 ICPDF网 联系我们和版权申明