ETP01-1621 [STMICROELECTRONICS]
Differential and common mode protection;型号: | ETP01-1621 |
厂家: | ST |
描述: | Differential and common mode protection |
文件: | 总7页 (文件大小:119K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ETP01-xx21
Protection for Ethernet lines
Features
■ Differential and common mode protection
■ Telcordia GR1089 Intrabuilding: 150 A, 2/10 µs
■ ITU-T K20/21: 40 A, 5/310 µs
■ Low capacitance: 13 pF max at 0 V
■ UL94 V0 approved resin
■ SO-8 package is JEDEC registered
SO-8
Benefits
■ Trisil™ technology is not subject to ageing and
provides a fail safe mode in short circuit for a
better protection.
Figure 1.
Schematic diagram (top view)
■ This series is used to help equipment to meet
main standards such as UL61950, IEC 950 /
CSA C22.2 and UL1459.
T1
GND
GND
T2
T1
Complies with the following standards
■ IEC 61000-4-2: Level 4
– 15 kV (air discharge)
– 8 kV (contact discharge)
GND
GND
T2
■ MIL STD 883E-Method 3015-7: class3:
– 25 kV (Human body model)
■ Telcordia GR-1089 Core: 100 A, 2/10 µs
■ ITU-T K20/21: 37.5 A, 5/310 µs
■ IEC 61000-4-5: 4 kV, 42 Ω, 96 A, 8/20 µs
■ IEC 61000-4-4 EFT : 40A (5/50ns)
Description
The ETP01 series is a low capacitance transient
surge arrestor designed for protection of high
debit rate communication network. Planar
technology used combines a high surge capability
to comply with Telcordia GR1089 Intrabuilding
and ITU-T K20/21, and low capacitance to avoid
distortion of high speed signals such as Ethernet.
Applications
This series can meet subscriber and central office
requirements.
■ Protection against telecommunications surge
standards on:
– 10/100 Mbps Ethernet
– T1 / E1 line cards
TM: Trisil is a trademark of STMicroelectronics
May 2011
Doc ID 14515 Rev 4
1/7
www.st.com
7
Characteristics
ETP01-xx21
1
Characteristics
Table 1.
Symbol
Absolute ratings (T
= 25 °C)
amb
Parameter
Value
Unit
5/310 µs
8/20 µs
40
100
150
8
A
A
A
A
Ipp
Peak pulse current(1)
2/10 µs
ITSM
Non repetitive surge peak on state current
t = 20 ms
Storage temperature range
-55 to 150
-40 to 150
Tstg
Tj
°C
°C
Operating junction temperature range
TL
Maximum temperature for soldering during 10 s
260
1. Surge capability tested according to ITU-T K20/21 and Telcordia GR1089 Intrabuilding connections
(Metallic and Longitudinal tests).
Table 2.
Electrical characteristics (T
= 25 °C)
amb
I
RM @ VRM
IRM @ VRM
Vbo
IH
C
C
Order code
µA
µA
V
mA
pF
pF
V
V
typ.
max.
max.
min.
max.(1) max.(2)
ETP01-1621
ETP01-2821
0.01
0.01
3.3
3.3
1
1
16
28
25
36
30
30
16
16
13
13
1. Test conditions: Capacitance between I/O and GND, VR = 0 V bias, VRMS = 1 V, F = 1 MHz
2. Test conditions: Capacitance between I/O and I/O, VR = 0 V bias, VRMS = 1 V, F = 1 MHz
2/7
Doc ID 14515 Rev 4
ETP01-xx21
Figure 2.
Characteristics
Non repetitive surge peak on-state current versus overload duration
ITSM(A)
100
10
1
F=50Hz
Tj initial=25°C
t(s)
0
1.E-02
1.E-01
1.E+00
Figure 3.
Junction capacitance versus
reverse voltage applied for
ETP01-1621 (typical values)
Figure 4.
Junction capacitance versus
reverse voltage applied for
ETP01-2821 (typical values)
C(pF)
C(pF)
15
16
15
14
13
12
11
10
9
8
7
6
5
ETP01-2821
ETP01-1621
14
13
12
11
10
9
8
7
6
5
F=1MHz
OSC=30mVRMS
Tj=25°C
F=1MHz
VOSC=30mVRMS
Tj=25°C
V
I/O - Gnd
I/O – I/O
I/O - Gnd
I/O – I/O
4
3
2
1
4
3
2
1
VLINE(V)
15
VLINE(V)
0
0
0
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16
0
5
10
20
25
30
Doc ID 14515 Rev 4
3/7
Application information
ETP01-xx21
2
Application information
Figure 5.
Application schematic for Ethernet 10/100 Mbps
RX-
RX-
75
RX+
RX+
75
TX-
TX-
75
TX+
TX+
75
DVIULC6-4SC6
2 x ETP01-xx21
Figure 6.
Recommended layout
T1
T1
GND
GND
GND
GND
T2
T2
4/7
Doc ID 14515 Rev 4
ETP01-xx21
Package information
3
Package information
●
●
Epoxy meets UL94, V0
Lead-free package
In order to meet environmental requirements, ST offers these devices in different grades of
®
®
ECOPACK packages, depending on their level of environmental compliance. ECOPACK
specifications, grade definitions and product status are available at: www.st.com.
®
ECOPACK is an ST trademark.
Table 3.
SO-8 dimensions
Dimensions
Millimeters
Min. Typ. Max. Min. Typ. Max.
Ref.
Inches
Seating
Plane
C
h x 45°
A
1.75
0.069
0.010
A2
A1
A
A1
0.1
0.25 0.004
0.049
C
A2 1.25
L
e
k
b
b
C
D
E
0.28
0.17
0.48 0.011
0.23 0.007
0.019
0.009
ppp C
L1
D
4.80 4.90 5.00 0.189 0.193 0.197
5.80 6.00 6.20 0.228 0.236 0.244
8
1
5
4
E1 3.80 3.90 4.00 0.150 0.154 0.157
E1
E
e
h
1.27
0.050
0.25
0.40
0.50 0.010
1.27 0.016
0.020
0.050
L
L1
k
1.04
0.041
0°
8°
0°
8°
ppp
0.10
0.004
Figure 7.
Footprint dimensions
in mm (inches)
Figure 8.
Marking
6.8
(0.268)
0.6
XXXXX : Marking
ECOPAK status
ZZ : Manufacturing location
Y : Year
x x x x x x
(0.024)
4.2
(0.165)
WW : week
z z y w w
1.27
(0.050)
Pin 1
Doc ID 14515 Rev 4
5/7
Ordering information
ETP01-xx21
4
Ordering information
Table 4.
Order code
ETP01-1621RL
ETP01-2821RL
Ordering information
Marking
Weight
Base qty
Delivery mode
ETP162
ETP282
0.08 g
0.08 g
2500
2500
Tape and reel
Tape and reel
5
Revision history
Table 5.
Date
Document revision history
Revision
Changes
04-Mar-2008
24-Sep-2009
1
2
Initial release.
Updated order code in Table 4 and surge values.
Updated Figure 1 caption to indicate top view. Updated graphic in
Table 3 to facilitate pin 1 identification. Updated Figure 8 to show
ECOPACK status marking.
19-Feb-2010
10-May-2011
3
4
Updated: Applications on page 1.
6/7
Doc ID 14515 Rev 4
ETP01-xx21
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2011 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Doc ID 14515 Rev 4
7/7
相关型号:
©2020 ICPDF网 联系我们和版权申明