HCC4052BD [STMICROELECTRONICS]

Rad-hard high voltage CMOS logic series;


型号：	HCC4052BD
厂家：	ST
描述：	Rad-hard high voltage CMOS logic series
文件：	总24页 (文件大小：303K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

HCC40xxx

HCC45xxx

Rad-hard high voltage CMOS logic series

Features

■ 3 to 20 V max operating voltage

■ Bufferized inputs and outputs

■ Standardized symmetrical outputs

characteristic

Flat-14

DIL-14

■ 50 ns typical propagation delays

■ 100 nA max 25 °C input current

■ 100% tested 20 V quiescent current

■ 5-10-15 V parametric testing

■ Hermetic packages

■ Rad-hard 100 kRad TID at 11rad/sec dose rate

■ SEL-SEU immune to 72 MeV/cm²/mg LET ions

■ ESCC qualified

DIL-16

Flat-16

Description

The HCC40xxx and HCC45xxx series are

composed of over 70 types of high voltage CMOS

functions, offering a set of highly noise tolerant

gates, Flip-Flops, multiplexers, counters, bus

interfaces and several other functions. The

radiation hardness, the single event latch-up

(SEL) and the single event upset (SEU) immunity

and the housing in hermetic packages of all types

of both series make them usable in the most

difficult environmental conditions.

Flat-24

DIL-24

The upper metallic lid is not electrically connected to any

pins, nor to the IC die inside the package.

The complete specification of each type is

available from the European Space Components

Coordination web site (ESCC):

https://spacecomponents.org/. ST guarantees full

compliance of qualified parts with these ESCC

detailed specifications.

August 2011

Doc ID 17102 Rev 3

1/24

www.st.com

Contents

HCC4xxx

Contents

HCC family overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Input equivalent circuit diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Maximum rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3.1

Recommended operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Order codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

2/24

Doc ID 17102 Rev 3

HCC family overview

Table 1.

Device summary

Description

Agency

Partnumber

Radiation level

EPPL ESCC specification

Package

qualification

HCC4001B Rad-hard quad 2-input NOR gate

HCC4002B Rad-hard dual 4-input NOR gate

HCC4008B Rad-hard 4-bit full adder

9201/041

9201/042

9202/039

9201/043

9201/044

9203/023

9306/014

9306/015

9202/050

9204/020

9204/021

9202/051

9204/022

9306/016

9204/023

9201/045

9204/024

9201/046

9203/022

9205/010

9204/025

Flat-14 - DIL-14

Flat-16 - DIL-16

Flat-14 - DIL-14

Flat-16 - DIL-16

Flat-14 - DIL-14

Flat-16 - DIL-16

Flat-14 - DIL-14

Flat-16 - DIL-16

HCC4011B Rad-hard quad 2-input NAND gate

HCC4012B Rad-hard dual 4-input NAND gate

HCC4013B Rad-hard dual D Flip-Flop

HCC4014B Rad-hard 8-stage static synchronous shift register

HCC4015B Rad-hard dual 4-stage static shift register

HCC4016B Rad-hard quad bilateral switch

HCC4017B Rad-hard decade counter/divider

HCC4018B Rad-hard presettable divide-by N counter

HCC4019B Rad-hard quad AND/OR select gate

HCC4020B Rad-hard 14-stage binary/ripple counter

HCC4021B Rad-hard 8-stage static shift register

HCC4022B Rad-hard divide-by-8 counter/divider

HCC4023B Rad-hard triple 3-input NAND gate

HCC4024B Rad-hard 7-stage binary/ripple counter

HCC4025B Rad-hard triple 3-input NOR gate

HCC4027B Rad-hard dual J-K master-slave Flip-Flop

HCC4028B Rad-hard BCD-to-decimal decoder

HCC4029B Rad-hard presettable up/down counter

100 krad (Si)

ESCC

Table 1.

Device summary (continued)

Description

Agency

Partnumber

Radiation level

EPPL ESCC specification

Package

qualification

HCC4030B Rad-hard quad exclusive OR gate

HCC4034B Rad-hard 8-stage static bidirectional bus register

HCC4035B Rad-hard 4-stage parallel I/O shift register

HCC4040B Rad-hard 12-stage binary/ripple counter

HCC4041UB Rad-hard quad true/complement buffer

HCC4042B Rad-hard quad clocked D latch

9201/047

9306/025

9306/018

9204/026

9202/040

9202/041

9202/042

9202/043

9202/044

9207/003

9202/045

9202/046

9202/047

9202/048

9202/049

9204/052

9209/001

9408/005

9408/009

9201/061

9401/010

9201/048

9201/063

9201/082

Flat-14 - DIL-14

Flat-24 - DIL-24

Flat-16 - DIL-16

Flat-14 - DIL-14

Flat-16 - DIL-16

Flat-14 - DIL-14

Flat-16 - DIL-16

Flat-14 - DIL-14

Flat-24 - DIL-24

Flat-14 - DIL-14

HCC4043B Rad-hard quad 3-state NOR R/S latch

HCC4044B Rad-hard quad 3-state NAND R/S latch

HCC4046B Rad-hard micropower phase locker loop

HCC4047B Rad-hard monostable/astable multivibrator

HCC4049UB Rad-hard hex inverting buffer/converter

HCC4050B Rad-hard hex non-inverting buffer/converter

HCC4051B Rad-hard single 8-channel analog mux/demux

HCC4052B Rad-hard different 4-channel analog mux/demux

HCC4053B Rad-hard triple 2-channel analog mux/demux

HCC4060B Rad-hard 14-stage counter/divider AND oscillator

HCC4063B Rad-hard 4-bit magnitude comparator

HCC4066B Rad-hard quad bilateral switch

100 krad (Si)

ESCC

HCC4067B Rad-hard single 16-channel analog mux/demux

HCC4068B Rad-hard 8-input NAND/AND gate

HCC4069UB Rad-hard hex inverter

HCC4070B Rad-hard quad exclusive OR gate

HCC4071B Rad-hard quad 2-input OR gate

HCC4072B Rad-hard dual 4-input OR gate

Table 1.

Device summary (continued)

Description

Agency

Partnumber

Radiation level

EPPL ESCC specification

Package

qualification

HCC4073B Rad-hard triple 3-input AND gate

9201/064

9201/065

9306/022

9201/055

9201/062

9201/052

9201/066

9409/002

9306/026

9206/002

9202/058

9204/036

9409/005

9401/013

9407/003

9204/054

9203/038

9204/041

9401/006

9401/030

9202/063

9408/006

Flat-14 - DIL-14

Flat-16 - DIL-16

Flat-14 - DIL-14

Flat-16 - DIL-16

Flat-14 - DIL-14

Flat-16 - DIL-16

Flat-24 - DIL-24

Flat-16 - DIL-16

HCC4075B Rad-hard triple 3-input OR gate

HCC4076B Rad-hard 4-bit D-type register

HCC4077B Rad-hard quad exclusive NOR gate

HCC4078B Rad-hard 8-input NOR/OR gate

HCC4081B Rad-hard quad 2-input AND gate

HCC4082B Rad-hard dual 4-input AND gate

HCC4093B Rad-hard quad 2-input NAND Schmitt trigger

HCC4094B Rad-hard 8-stage shift-and-store bus register

HCC4098B Rad-hard dual monostable multivibrator

HCC4099B Rad-hard 8-bit addressable latch

100 krad (Si)

ESCC

HCC40103B Rad-hard presettable 8-bit binary down counter

HCC40106B Rad-hard hex schmitt trigger

HCC40107B Rad-hard dual 2-input NAND buffer/driver

HCC40109B Rad-hard quad low-to-high voltage level shifter

HCC40161B Rad-hard binary counter with asynchronous clear

HCC40174B Rad-hard hex D Flip-Flop

HCC40193B Rad-hard presettable 4-bit binary up-down counter

HCC4502B Rad-hard strobed hex inverter/buffer

HCC4503B Rad-hard hex buffer 3-state non-inverter

HCC4508B Rad-hard dual 4-bit Latch 3-state outputs

HCC4512B Rad-hard 8-channel data selec. with 3-state output

Table 1.

Device summary (continued)

Description

Agency

Partnumber

Radiation level

EPPL ESCC specification

Package

qualification

HCC4514B Rad-hard 4-bit Latch / 4-to-16 line decoder output high

HCC4515B Rad-hard 4-bit Latch / 4-to-16 line decoder output low

HCC4516B Rad-hard presettable 4-bit binary up/down counter

HCC4520B Rad-hard dual binary up-down counter

9408/012

9205/011

9204/045

9204/028

9202/065

9207/007

9408/011

9408/025

Flat-24 - DIL-24

Flat-16 - DIL-16

100 krad (Si)

ESCC

HCC4532B Rad-hard 8-input priority encoder

HCC4538B Rad-hard dual precision monostable multivibrator

HCC4555B Rad-hard dual 1-of-4 decoder/demux output high

HCC4556B Rad-hard dual 1-of-4 decoder/demux output low

Note:

Contact ST sales office for information about the specific conditions for other CMOS4000 part numbers and product in die form

HCC4xxx

Input equivalent circuit diagram

Figure 1.

Input equivalent circuit diagram

Doc ID 17102 Rev 3

7/24

Maximum rating

HCC4xxx

Maximum rating

Stressing the device above the rating listed in the “absolute maximum ratings” table may

cause permanent damage to the device. These are stress ratings only and operation of the

device at these or any other conditions above those indicated in the operating sections of

this specification is not implied. Exposure to absolute maximum rating conditions for

extended periods may affect device reliability.

Table 2.

Symbol

Absolute maximum ratings

Parameter

Value

Unit

V_DD

V_I

Supply voltage

-0.5 to 22

-0.5 to V_DD+ 0.5

DC input voltage

I_I

DC input current

°C

P_D

Power dissipation per package

Operating temperature

Storage temperature

200

T_OP

T_STG

-55 to +125

-65 to +150

°C

Note:

All voltage values are referred to V pin voltage.

3.1

Recommended operating conditions

Table 3.

Symbol

Recommended operating conditions

Parameter

Value

Unit

V_DD

V_I

Supply voltage

Input voltage

0 to V_DD

-55 to +125

T_OP

Operating temperature

°C

8/24

Doc ID 17102 Rev 3

HCC4xxx

Package mechanical data

In order to meet environmental requirements, ST offers these devices in different grades of

ECOPACK packages, depending on their level of environmental compliance. ECOPACK

specifications, grade definitions and product status are available at: www.st.com.

ECOPACK is an ST trademark.

Doc ID 17102 Rev 3

9/24

Package mechanical data

HCC4xxx

Table 4.

Ceramic Flat-14 mechanical data

Typ

Dim

Min

Max

6.75

9.76

1.49

0.10

7.50

6.91

9.95

7.06

10.14

1.95

0.15

7.75

0.127

7.62

1.27

0.43

6.0

0.38

0.48

22.0

18.75

0.38

4.31

Figure 2.

Ceramic Flat-14 mechanical drawings

016029E

Note:

The upper metallic lid is not electrically connected to any pins, nor to the IC die inside the

package. Connecting unused pins or metal lid to ground or to the power supply will not affect

the electrical characteristics.

10/24

Doc ID 17102 Rev 3

HCC4xxx

Package mechanical data

Table 5.

Ceramic DIL-14 mechanical data

Dim.

Mm.

Typ

Min.

Max.

2.1

3.00

0.63

1.82

0.40

0.20

18.79

7.36

2.54

3.70

1.14

2.39

0.50

0.30

19.20

7.87

0.88

2.03

0.45

0.254

19.00

7.62

2.54

15.11

7.62

7.11

15.24

7.87

15.37

8.12

7.75

3.70

12.1 n

1.5

10.90

1.14

1.27

Figure 3.

Ceramic DIL-14 mechanical drawings

0016173H

Note:

The upper metallic lid is not electrically connected to any pins, nor to the IC die inside the

package. Connecting unused pins or metal lid to ground or to the power supply will not affect

the electrical characteristics.

Doc ID 17102 Rev 3

11/24

Package mechanical data

HCC4xxx

Table 6.

Ceramic Flat-16 mechanical data

mm.

Typ

Dim.

Min.

Max.

6.75

9.76

1.49

0.102

8.76

6.91

9.94

7.06

10.14

1.95

0.127

8.89

1.27

0.43

0.152

9.01

0.38

6.0

0.48

18.75

0.33

22.0

0.43

0.38

4.31

Figure 4.

Ceramic Flat-16 mechanical drawings

0016030E

Note:

The upper metallic lid is not electrically connected to any pins, nor to the IC die inside the

package. Connecting unused pins or metal lid to ground or to the power supply will not affect

the electrical characteristics.

12/24

Doc ID 17102 Rev 3

HCC4xxx

Package mechanical data

Table 7.

Ceramic DIL-16 package dimensions

Dim

Typ

Min

Max

2.10

3.00

0.63

1.82

0.40

0.20

20.06

7.36

2.71

3.70

1.14

2.39

0.50

0.30

20.58

7.87

0.88

0.45

0.254

20.32

7.62

2.54

17.65

7.62

7.29

17.78

7.87

17.90

8.12

7.70

3.83

12.10

1.50

7.49

10.90

1.14

Figure 5.

Ceramic DIL-16 package drawings

Note:

The upper metallic lid is not electrically connected to any pins, nor to the IC die inside the

package. Connecting unused pins or metal lid to ground or to the power supply will not affect

the electrical characteristics.

Doc ID 17102 Rev 3

13/24

Package mechanical data

HCC4xxx

Table 8.

Ceramic Flat-24 package dimensions

Typ

Dim

Min

Max

10.70

15.30

1.45

11.00

15.49

11.30

15.70

1.90

0.23

0.254

13.97

1.27

0.30

13.84

1.22

14.10

1.32

0.45

0.508

0.55

7.25

8.25

25.00

0.45

28.00

0.55

0.508

7.01

Figure 6.

Ceramic Flat-24 package drawings

Note:

The upper metallic lid is not electrically connected to any pins, nor to the IC die inside the

package. Connecting unused pins or metal lid to ground or to the power supply will not affect

the electrical characteristics.

14/24

Doc ID 17102 Rev 3

HCC4xxx

Package mechanical data

Table 9.

Ceramic DIL-24 package dimensions

Dim

Typ

Min

Max

2.159

1.270

0.307

1.270

0.457

.254

1.931

1.016

0.274

2.387

1.524

0.340

0.407

0.229

2.205

30.17

14.98

2.410

27.81

14.85

12.60

3.000

0.507

0.304

2.727

30.78

15.49

2.670

28.06

15.36

13.00

3.800

2.466

30.48

15.24

2.540

27.94

15.11

12.80

3.300

Figure 7.

Ceramic DIL-24 package drawings

0016179I

Note:

The upper metallic lid is not electrically connected to any pins, nor to the IC die inside the

package. Connecting unused pins or metal lid to ground or to the power supply will not affect

the electrical characteristics.

Doc ID 17102 Rev 3

15/24

Order codes

Table 10. Ordering information

ESCC detailed

Mass

(g)

Order code

Quality level

Comment

Package

Lead finish

Marking

EPPL Packing

specification

HCC4001BK 9201/041/01 or 02

HCC4001BD 9201/041/03 or 04

HCC4002BK 9201/042/01 or 02

HCC4002BD 9201/042/03 or 04

HCC4008BK 9202/039/01 or 02

HCC4008BD 9202/039/08 or 09

HCC4011BK 9201/043/01 or 02

HCC4011BD 9201/043/03 or 04

HCC4012BK 9201/044/01 or 02

HCC4012BD 9201/044/03 or 04

HCC4013BK 9203/023/01 or 02

HCC4013BD 9203/023/03 or 04

HCC4014BK 9306/014/01 or 02

HCC4014BD 9306/014/08 or 09

HCC4015BK 9306/015/01 or 02

HCC4015BD 9306/015/08 or 09

HCC4016BK 9202/050/01 or 02

HCC4016BD 9202/050/03 or 04

HCC4017BK 9204/020/01 or 02

HCC4017BD 9204/020/08 or 09

HCC4018BK 9204/021/01 or 02

HCC4018BD 9204/021/08 or 09

Flat-14

DIL-14

Flat-14

DIL-14

Flat-16

DIL-16

Flat-14

DIL-14

Flat-14

DIL-14

Flat-14

DIL-14

Flat-16

DIL-16

Flat-16

DIL-16

Flat-14

DIL-14

Flat-16

DIL-16

Flat-16

DIL-16

920104101 or 02 0.70

920104103 or 04 2.20

920104201 or 02 0.70

920104203 or 04 2.20

920203901 or 02 0.70

920203908 or 09 2.20

920104301 or 02 0.70

920104303 or 04 2.20

920104401 or 02 0.70

920104403 or 04 2.20

920302301 or 02 0.70

920302303 or 04 2.20

930601401 or 02 0.70

930601408 or 09 2.20

930601501 or 02 0.70

930601508 or 09 2.20

920205001 or 02 0.70

920205003 or 04 2.20

920402001 or 02 0.70

920402008 or 09 2.20

920402101 or 02 0.70

920402108 or 09 2.20

ESCC flight Specify ESCC variant number in PO

Gold or solder dip

Strip pack

Table 10. Ordering information (continued)

ESCC detailed

Mass

(g)

Order code

Quality level

Comment

Package

Lead finish

Marking

EPPL Packing

specification

HCC4019BK 9202/051/01 or 02

HCC4019BD 9202/051/08 or 09

HCC4020BK 9204/022/01 or 02

HCC4020BD 9204/022/08 or 09

HCC4021BK 9306/016/01 or 02

HCC4021BD 9306/016/08 or 09

HCC4022BK 9204/023/01 or 02

HCC4022BD 9204/023/08 or 09

HCC4023BK 9201/045/01 or 02

HCC4023BD 9201/045/03 or 04

HCC4024BK 9204/024/01 or 02

HCC4024BD 9204/024/03 or 04

Flat-16

DIL-16

Flat-16

DIL-16

Flat-16

DIL-16

Flat-16

DIL-16

Flat-14

DIL-14

Flat-14

DIL-14

920205101 or 02 0.70

920205108 or 09 2.20

920402201 or 02 0.70

920402208 or 09 2.20

930601601 or 02 0.70

930601608 or 09 2.20

920402301 or 02 0.70

920402308 or 09 2.20

920104501 or 02 0.70

920104503 or 04 2.20

920402401 or 02 0.70

920402403 or 04 2.20

HCC4025BK 9201/046/01 or 02 ESCC flight Specify ESCC variant number in PO Flat-14 Gold or solder dip 920104601 or 02 0.70

Strip pack

HCC4025BD 9201/046/03 or 04

HCC4027BK 9203/022/01 or 02

HCC4027BD 9203/022/08 or 09

HCC4028BK 9205/010/01 or 02

HCC4028BD 9205/010/08 or 09

HCC4029BK 9204/025/01 or 02

HCC4029BD 9204/025/08 or 09

HCC4030BK 9201/047/01 or 02

HCC4030BD 9201/047/03 or 04

HCC4034BK 9306/025/01 or 02

HCC4034BD 9306/025/03 or 04

HCC4035BK 9306/018/01 or 02

DIL-14

Flat-16

DIL-16

Flat-16

DIL-16

Flat-16

DIL-16

Flat-14

DIL-14

Flat-24

DIL-24

Flat-16

920104603 or 04 2.20

920302201 or 02 0.70

920302208 or 09 2.20

920501001 or 02 0.70

920501008 or 09 2.20

920402501 or 02 0.70

920402508 or 09 2.20

920104701 or 02 0.70

920104703 or 04 2.20

930602501 or 02 1.70

930602503 or 04 5.20

930601801 or 02 0.70

Table 10. Ordering information (continued)

ESCC detailed

Mass

(g)

Order code

Quality level

Comment

Package

Lead finish

Marking

EPPL Packing

specification

HCC4035BD 9306/018/08 or 09

HCC4040BK 9204/026/01 or 02

HCC4040BD 9204/026/08 or 09

HCC4041UBK 9202/040/01 or 02

HCC4041UBD 9202/040/03 or 04

HCC4042BK 9202/041/01 or 02

HCC4042BD 9202/041/08 or 09

HCC4043BK 9202/042/01 or 02

HCC4043BD 9202/042/08 or 09

HCC4044BK 9202/043/01 or 02

HCC4044BD 9202/043/08 or 09

HCC4046BK 9202/044/01 or 02

DIL-16

Flat-16

DIL-16

Flat-14

DIL-14

Flat-16

DIL-16

Flat-16

DIL-16

Flat-16

DIL-16

Flat-16

930601808 or 09 2.20

920402601 or 02 0.70

920402608 or 09 2.20

920204001 or 02 0.70

920204003 or 04 2.20

920204101 or 02 0.70

920204108 or 09 2.20

920204201 or 02 0.70

920204208 or 09 2.20

920204301 or 02 0.70

920204308 or 09 2.20

920204401 or 02 0.70

HCC4046BD 9202/044/08 or 09 ESCC flight Specify ESCC variant number in PO DIL-16 Gold or solder dip 920204408 or 09 2.20

Strip pack

HCC4047BK 9207/003/01 or 02

HCC4047BD 9207/003/03 or 04

HCC4049UBK 9202/045/01 or 02

HCC4049UBD 9202/045/08 or 09

HCC4050BK 9202/046/01 or 02

HCC4050BD 9202/046/08 or 09

HCC4051BK 9202/047/01 or 02

HCC4051BD 9202/047/08 or 09

HCC4052BK 9202/048/01 or 02

HCC4052BD 9202/048/08 or 09

HCC4053BK 9202/049/01 or 02

HCC4053BD 9202/049/08 or 09

Flat-14

DIL-14

Flat-16

DIL-16

Flat-16

DIL-16

Flat-16

DIL-16

Flat-16

DIL-16

Flat-16

DIL-16

920700301 or 02 0.70

920700303 or 04 2.20

920204501 or 02 0.70

920204508 or 09 2.20

920204601 or 02 0.70

920204608 or 09 2.20

920204701 or 02 0.70

920204708 or 09 2.20

920204801 or 02 0.70

920204808 or 09 2.20

920204901 or 02 0.70

920204908 or 09 2.20

Table 10. Ordering information (continued)

ESCC detailed

Mass

(g)

Order code

Quality level

Comment

Package

Lead finish

Marking

EPPL Packing

specification

HCC4060BK 9204/052/01 or 02

HCC4060BD 9204/052/08 or 09

HCC4063BK 9209/001/01 or 02

HCC4063BD 9209/001/08 or 09

HCC4066BK 9408/005/01 or 02

HCC4066BD 9408/005/03 or 04

HCC4067BK 9408/009/01 or 02

HCC4067BD 9408/009/03 or 04

HCC4068BK 9201/061/01 or 02

HCC4068BD 9201/061/03 or 04

HCC4069UBK 9401/010/01 or 02

HCC4069UBD 9401/010/03 or 04

Flat-16

DIL-16

Flat-16

DIL-16

Flat-14

DIL-14

Flat-24

DIL-24

Flat-14

DIL-14

Flat-14

DIL-14

920405201 or 02 0.70

920405208 or 09 2.20

920900101 or 02 0.70

920900108 or 09 2.20

940800501 or 02 0.70

940800503 or 04 2.20

940800901 or 02 1.70

940800903 or 04 5.20

920106101 or 02 0.70

920106103 or 04 2.20

940101001 or 02 0.70

940101003 or 04 2.20

HCC4070BK 9201/048/01 or 02 ESCC flight Specify ESCC variant number in PO Flat-14 Gold or solder dip 920104801 or 02 0.70

Strip pack

HCC4070BD 9201/048/03 or 04

HCC4071BK 9201/063/01 or 02

HCC4071BD 9201/063/03 or 04

HCC4072BK 9201/082/01 or 02

HCC4072BD 9201/082/03 or 04

HCC4073BK 9201/064/01 or 02

HCC4073BD 9201/064/03 or 04

HCC4075BK 9201/065/01 or 02

HCC4075BD 9201/065/03 or 04

HCC4076BK 9306/022/01 or 02

HCC4076BD 9306/022/08 or 09

HCC4077BK 9201/055/01 or 02

DIL-14

Flat-14

DIL-14

Flat-14

DIL-14

Flat-14

DIL-14

Flat-14

DIL-14

Flat-16

DIL-16

Flat-14

920104803 or 04 2.20

920106301 or 02 0.70

920106303 or 04 2.20

920108201 or 02 0.70

920108203 or 04 2.20

920106401 or 02 0.70

920106403 or 04 2.20

920106501 or 02 0.70

920106503 or 04 2.20

930602201 or 02 0.70

930602208 or 09 2.20

920105501 or 02 0.70

Table 10. Ordering information (continued)

ESCC detailed

Mass

(g)

Order code

Quality level

Comment

Package

Lead finish

Marking

EPPL Packing

specification

HCC4077BD 9201/055/03 or 04

HCC4078BK 9201/062/01 or 02

HCC4078BD 9201/062/03 or 04

HCC4081BK 9201/052/01 or 02

HCC4081BD 9201/052/03 or 04

HCC4082BK 9201/066/01 or 02

HCC4082BD 9201/066/03 or 04

HCC4093BK 9409/002/01 or 02

HCC4093BD 9409/002/03 or 04

HCC4094BK 9306/026/01 or 02

HCC4094BD 9306/026/08 or 09

DIL-14

Flat-14

DIL-14

Flat-14

DIL-14

Flat-14

DIL-14

Flat-14

DIL-14

Flat-16

DIL-16

920105503 or 04 2.20

920106201 or 02 0.70

920106203 or 04 2.20

920105201 or 02 0.70

920105203 or 04 2.20

920106601 or 02 0.70

920106603 or 04 2.20

940900201 or 02 0.70

940900203 or 04 2.20

930602601 or 02 0.70

930602608 or 09 2.20

HCC4098BK 9206/003/01 or 02 ESCC flight Specify ESCC variant number in PO Flat-16 Gold or solder dip 920600301 or 02 0.70

Strip pack

HCC4098BD 9206/003/08 or 09

HCC4099BK 9202/058/01 or 02

HCC4099BD 9202/058/08 or 09

HCC40103BK 9204/036/01 or 02

HCC40103BD 9204/036/08 or 09

HCC40106BK 9409/005/01 or 02

HCC40106BD 9409/005/03 or 04

HCC40107BK 9401/013/01 or 02

HCC40107BD 9401/013/03 or 04

HCC40109BK 9407/003/01 or 02

HCC40109BD 9407/003/08 or 09

DIL-16

Flat-16

DIL-16

Flat-16

DIL-16

Flat-14

DIL-14

Flat-14

DIL-14

Flat-16

DIL-16

920600308 or 09 2.20

920205801 or 02 0.70

920205808 or 09 2.20

920403601 or 02 0.70

920403608 or 09 2.20

940900501 or 02 0.70

940900503 or 04 2.20

940101301 or 02 0.70

940101303 or 04 2.20

940700301 or 02 0.70

940700308 or 09 2.20

Table 10. Ordering information (continued)

ESCC detailed

Mass

(g)

Order code

Quality level

Comment

Package

Lead finish

Marking

EPPL Packing

specification

HCC40161BK 9204/054/01 or 02

HCC40161BD 9204/054/08 or 09

HCC40174BK 9203/038/01 or 02

HCC40174BD 9203/038/08 or 09

HCC40193BK 9204/041/01 or 02

HCC40193BD 9204/041/08 or 09

HCC4502BK 9401/006/01 or 02

HCC4502BD 9401/006/08 or 09

HCC4503BK 9401/030/01 or 02

HCC4503BD 9401/030/08 or 09

HCC4508BK 9202/063/01 or 02

HCC4508BD 9202/063/03 or 04

Flat-16

DIL-16

Flat-16

DIL-16

Flat-16

DIL-16

Flat-16

DIL-16

Flat-16

DIL-16

Flat-24

DIL-24

920405401 or 02 0.70

920405408 or 09 2.20

920303801 or 02 0.70

920303808 or 09 2.20

920404101 or 02 0.70

920404108 or 09 2.20

940100601 or 02 0.70

940100608 or 09 2.20

940103001 or 02 0.70

940103008 or 09 2.20

920206301 or 02 1.70

920206303 or 04 5.20

HCC4512BK 9408/006/01 or 02 ESCC flight Specify ESCC variant number in PO Flat-16 Gold or solder dip 940800601 or 02 0.70

Strip pack

HCC4512BD 9408/006/08 or 09

HCC4514BK 9408/012/01 or 02

HCC4514BD 9408/012/03 or 04

HCC4515BK 9205/011/01 or 02

HCC4515BD 9205/011/03 or 04

HCC4516BK 9204/045/01 or 02

HCC4516BD 9204/045/08 or 09

HCC4520BK 9204/028/01 or 02

HCC4520BD 9204/028/08 or 09

HCC4532BK 9202/065/01 or 02

HCC4532BD 9202/065/08 or 09

HCC4538BK 9207/007/01 or 02

DIL-16

Flat-24

DIL-24

Flat-24

DIL-24

Flat-16

DIL-16

Flat-16

DIL-16

Flat-16

DIL-16

Flat-16

940800608 or 09 2.20

940801201 or 02 1.70

940801203 or 04 5.20

920501101 or 02 1.70

920501103 or 04 5.20

920404501 or 02 0.70

920404508 or 09 2.20

920402801 or 02 0.70

920402808 or 09 2.20

920206501 or 02 0.70

920206508 or 09 2.20

920700701 or 02 0.70

Table 10. Ordering information (continued)

ESCC detailed

Mass

(g)

Order code

Quality level

Comment

Package

Lead finish

Marking

EPPL Packing

specification

HCC4538BD 9207/007/08 or 09

HCC4555BK 9408/011/01 or 02

DIL-16

Flat-16

920700708 or 09 2.20

940801101 or 02 0.70

HCC4555BD 9408/011/08 or 09 ESCC flight Specify ESCC variant number in PO DIL-16 Gold or solder dip 940801108 or 09 2.20

Strip pack

HCC4556BK 9408/025/01 or 02

HCC4556BD 9408/025/08 or 09

Flat-16

DIL-16

940802501 or 02 0.70

940802508 or 09 2.20

Note:

Contact ST sales office for information about the specific conditions for other CMOS4000 part numbers and product in die form

HCC4xxx

Revision history

Table 11. Document revision history

Date

Revision

Changes

24-Mar-2010

29-Mar-2010

First release

Updated coverpage description

Added Note: on page 10, Note: on page 11, Note: on page 12, Note:

on page 13, Note: on page 14, Note: on page 15 and in the “Pin

connections” diagram on the coverpage.

10-Aug-2011

Doc ID 17102 Rev 3

23/24

HCC4xxx

Please Read Carefully:

Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the

right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any

time, without notice.

All ST products are sold pursuant to ST’s terms and conditions of sale.

Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no

liability whatsoever relating to the choice, selection or use of the ST products and services described herein.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this

document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products

or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such

third party products or services or any intellectual property contained therein.

UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED

WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS

OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.

UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT

RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING

APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,

DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE

GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.

Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void

any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any

liability of ST.

ST and the ST logo are trademarks or registered trademarks of ST in various countries.

Information in this document supersedes and replaces all information previously supplied.

The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.

STMicroelectronics group of companies

Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -

Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America

www.st.com

24/24

Doc ID 17102 Rev 3

HCC4052BD [STMICROELECTRONICS]

相关型号：

HCC4052BEY

HCC4052BF

HCC4052BK

HCC4052BM1

HCC4053B

HCC4053BC1

HCC4053BD

HCC4053BEY

HCC4053BF

HCC4053BK

HCC4053BKG

HCC4053BM1