HCC4067BK [STMICROELECTRONICS]
Rad-hard high voltage CMOS logic series;型号: | HCC4067BK |
厂家: | ST |
描述: | Rad-hard high voltage CMOS logic series |
文件: | 总24页 (文件大小:303K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HCC40xxx
HCC45xxx
Rad-hard high voltage CMOS logic series
Features
■ 3 to 20 V max operating voltage
■ Bufferized inputs and outputs
■ Standardized symmetrical outputs
characteristic
Flat-14
DIL-14
■ 50 ns typical propagation delays
■ 100 nA max 25 °C input current
■ 100% tested 20 V quiescent current
■ 5-10-15 V parametric testing
■ Hermetic packages
■ Rad-hard 100 kRad TID at 11rad/sec dose rate
■ SEL-SEU immune to 72 MeV/cm²/mg LET ions
■ ESCC qualified
DIL-16
Flat-16
Description
The HCC40xxx and HCC45xxx series are
composed of over 70 types of high voltage CMOS
functions, offering a set of highly noise tolerant
gates, Flip-Flops, multiplexers, counters, bus
interfaces and several other functions. The
radiation hardness, the single event latch-up
(SEL) and the single event upset (SEU) immunity
and the housing in hermetic packages of all types
of both series make them usable in the most
difficult environmental conditions.
Flat-24
DIL-24
The upper metallic lid is not electrically connected to any
pins, nor to the IC die inside the package.
The complete specification of each type is
available from the European Space Components
Coordination web site (ESCC):
https://spacecomponents.org/. ST guarantees full
compliance of qualified parts with these ESCC
detailed specifications.
August 2011
Doc ID 17102 Rev 3
1/24
www.st.com
24
Contents
HCC4xxx
Contents
1
2
3
HCC family overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Input equivalent circuit diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Maximum rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.1
Recommended operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4
5
6
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Order codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
2/24
Doc ID 17102 Rev 3
1
HCC family overview
Table 1.
Device summary
Description
Agency
Partnumber
Radiation level
EPPL ESCC specification
Package
qualification
HCC4001B Rad-hard quad 2-input NOR gate
HCC4002B Rad-hard dual 4-input NOR gate
HCC4008B Rad-hard 4-bit full adder
Y
-
9201/041
9201/042
9202/039
9201/043
9201/044
9203/023
9306/014
9306/015
9202/050
9204/020
9204/021
9202/051
9204/022
9306/016
9204/023
9201/045
9204/024
9201/046
9203/022
9205/010
9204/025
Flat-14 - DIL-14
Flat-14 - DIL-14
Flat-16 - DIL-16
Flat-14 - DIL-14
Flat-14 - DIL-14
Flat-14 - DIL-14
Flat-16 - DIL-16
Flat-16 - DIL-16
Flat-14 - DIL-14
Flat-16 - DIL-16
Flat-16 - DIL-16
Flat-16 - DIL-16
Flat-16 - DIL-16
Flat-16 - DIL-16
Flat-16 - DIL-16
Flat-14 - DIL-14
Flat-14 - DIL-14
Flat-14 - DIL-14
Flat-16 - DIL-16
Flat-16 - DIL-16
Flat-16 - DIL-16
-
HCC4011B Rad-hard quad 2-input NAND gate
HCC4012B Rad-hard dual 4-input NAND gate
HCC4013B Rad-hard dual D Flip-Flop
Y
-
Y
Y
Y
-
HCC4014B Rad-hard 8-stage static synchronous shift register
HCC4015B Rad-hard dual 4-stage static shift register
HCC4016B Rad-hard quad bilateral switch
HCC4017B Rad-hard decade counter/divider
HCC4018B Rad-hard presettable divide-by N counter
HCC4019B Rad-hard quad AND/OR select gate
HCC4020B Rad-hard 14-stage binary/ripple counter
HCC4021B Rad-hard 8-stage static shift register
HCC4022B Rad-hard divide-by-8 counter/divider
HCC4023B Rad-hard triple 3-input NAND gate
HCC4024B Rad-hard 7-stage binary/ripple counter
HCC4025B Rad-hard triple 3-input NOR gate
HCC4027B Rad-hard dual J-K master-slave Flip-Flop
HCC4028B Rad-hard BCD-to-decimal decoder
HCC4029B Rad-hard presettable up/down counter
Y
-
100 krad (Si)
ESCC
Y
Y
Y
-
Y
Y
-
Y
Y
Y
Table 1.
Device summary (continued)
Description
Agency
Partnumber
Radiation level
EPPL ESCC specification
Package
qualification
HCC4030B Rad-hard quad exclusive OR gate
HCC4034B Rad-hard 8-stage static bidirectional bus register
HCC4035B Rad-hard 4-stage parallel I/O shift register
HCC4040B Rad-hard 12-stage binary/ripple counter
HCC4041UB Rad-hard quad true/complement buffer
HCC4042B Rad-hard quad clocked D latch
Y
-
9201/047
9306/025
9306/018
9204/026
9202/040
9202/041
9202/042
9202/043
9202/044
9207/003
9202/045
9202/046
9202/047
9202/048
9202/049
9204/052
9209/001
9408/005
9408/009
9201/061
9401/010
9201/048
9201/063
9201/082
Flat-14 - DIL-14
Flat-24 - DIL-24
Flat-16 - DIL-16
Flat-16 - DIL-16
Flat-14 - DIL-14
Flat-16 - DIL-16
Flat-16 - DIL-16
Flat-16 - DIL-16
Flat-16 - DIL-16
Flat-14 - DIL-14
Flat-16 - DIL-16
Flat-16 - DIL-16
Flat-16 - DIL-16
Flat-16 - DIL-16
Flat-16 - DIL-16
Flat-16 - DIL-16
Flat-16 - DIL-16
Flat-14 - DIL-14
Flat-24 - DIL-24
Flat-14 - DIL-14
Flat-14 - DIL-14
Flat-14 - DIL-14
Flat-14 - DIL-14
Flat-14 - DIL-14
Y
Y
-
-
HCC4043B Rad-hard quad 3-state NOR R/S latch
HCC4044B Rad-hard quad 3-state NAND R/S latch
HCC4046B Rad-hard micropower phase locker loop
HCC4047B Rad-hard monostable/astable multivibrator
HCC4049UB Rad-hard hex inverting buffer/converter
HCC4050B Rad-hard hex non-inverting buffer/converter
HCC4051B Rad-hard single 8-channel analog mux/demux
HCC4052B Rad-hard different 4-channel analog mux/demux
HCC4053B Rad-hard triple 2-channel analog mux/demux
HCC4060B Rad-hard 14-stage counter/divider AND oscillator
HCC4063B Rad-hard 4-bit magnitude comparator
HCC4066B Rad-hard quad bilateral switch
-
-
-
Y
Y
Y
Y
-
100 krad (Si)
ESCC
-
-
Y
Y
-
HCC4067B Rad-hard single 16-channel analog mux/demux
HCC4068B Rad-hard 8-input NAND/AND gate
HCC4069UB Rad-hard hex inverter
-
Y
-
HCC4070B Rad-hard quad exclusive OR gate
HCC4071B Rad-hard quad 2-input OR gate
Y
-
HCC4072B Rad-hard dual 4-input OR gate
Table 1.
Device summary (continued)
Description
Agency
Partnumber
Radiation level
EPPL ESCC specification
Package
qualification
HCC4073B Rad-hard triple 3-input AND gate
Y
-
9201/064
9201/065
9306/022
9201/055
9201/062
9201/052
9201/066
9409/002
9306/026
9206/002
9202/058
9204/036
9409/005
9401/013
9407/003
9204/054
9203/038
9204/041
9401/006
9401/030
9202/063
9408/006
Flat-14 - DIL-14
Flat-14 - DIL-14
Flat-16 - DIL-16
Flat-14 - DIL-14
Flat-14 - DIL-14
Flat-14 - DIL-14
Flat-14 - DIL-14
Flat-14 - DIL-14
Flat-16 - DIL-16
Flat-16 - DIL-16
Flat-16 - DIL-16
Flat-16 - DIL-16
Flat-14 - DIL-14
Flat-14 - DIL-14
Flat-16 - DIL-16
Flat-16 - DIL-16
Flat-16 - DIL-16
Flat-16 - DIL-16
Flat-16 - DIL-16
Flat-16 - DIL-16
Flat-24 - DIL-24
Flat-16 - DIL-16
HCC4075B Rad-hard triple 3-input OR gate
HCC4076B Rad-hard 4-bit D-type register
Y
-
HCC4077B Rad-hard quad exclusive NOR gate
HCC4078B Rad-hard 8-input NOR/OR gate
-
HCC4081B Rad-hard quad 2-input AND gate
Y
-
HCC4082B Rad-hard dual 4-input AND gate
HCC4093B Rad-hard quad 2-input NAND Schmitt trigger
HCC4094B Rad-hard 8-stage shift-and-store bus register
HCC4098B Rad-hard dual monostable multivibrator
HCC4099B Rad-hard 8-bit addressable latch
Y
Y
-
Y
Y
Y
Y
Y
Y
Y
-
100 krad (Si)
ESCC
HCC40103B Rad-hard presettable 8-bit binary down counter
HCC40106B Rad-hard hex schmitt trigger
HCC40107B Rad-hard dual 2-input NAND buffer/driver
HCC40109B Rad-hard quad low-to-high voltage level shifter
HCC40161B Rad-hard binary counter with asynchronous clear
HCC40174B Rad-hard hex D Flip-Flop
HCC40193B Rad-hard presettable 4-bit binary up-down counter
HCC4502B Rad-hard strobed hex inverter/buffer
HCC4503B Rad-hard hex buffer 3-state non-inverter
HCC4508B Rad-hard dual 4-bit Latch 3-state outputs
HCC4512B Rad-hard 8-channel data selec. with 3-state output
Y
Y
Y
Y
Table 1.
Device summary (continued)
Description
Agency
Partnumber
Radiation level
EPPL ESCC specification
Package
qualification
HCC4514B Rad-hard 4-bit Latch / 4-to-16 line decoder output high
HCC4515B Rad-hard 4-bit Latch / 4-to-16 line decoder output low
HCC4516B Rad-hard presettable 4-bit binary up/down counter
HCC4520B Rad-hard dual binary up-down counter
-
-
9408/012
9205/011
9204/045
9204/028
9202/065
9207/007
9408/011
9408/025
Flat-24 - DIL-24
Flat-24 - DIL-24
Flat-16 - DIL-16
Flat-16 - DIL-16
Flat-16 - DIL-16
Flat-16 - DIL-16
Flat-16 - DIL-16
Flat-16 - DIL-16
-
-
100 krad (Si)
ESCC
HCC4532B Rad-hard 8-input priority encoder
-
HCC4538B Rad-hard dual precision monostable multivibrator
HCC4555B Rad-hard dual 1-of-4 decoder/demux output high
HCC4556B Rad-hard dual 1-of-4 decoder/demux output low
-
Y
-
Note:
Contact ST sales office for information about the specific conditions for other CMOS4000 part numbers and product in die form
HCC4xxx
Input equivalent circuit diagram
2
Input equivalent circuit diagram
Figure 1.
Input equivalent circuit diagram
Doc ID 17102 Rev 3
7/24
Maximum rating
HCC4xxx
3
Maximum rating
Stressing the device above the rating listed in the “absolute maximum ratings” table may
cause permanent damage to the device. These are stress ratings only and operation of the
device at these or any other conditions above those indicated in the operating sections of
this specification is not implied. Exposure to absolute maximum rating conditions for
extended periods may affect device reliability.
Table 2.
Symbol
Absolute maximum ratings
Parameter
Value
Unit
VDD
VI
Supply voltage
-0.5 to 22
-0.5 to VDD + 0.5
10
V
V
DC input voltage
II
DC input current
mA
mW
°C
PD
Power dissipation per package
Operating temperature
Storage temperature
200
TOP
TSTG
-55 to +125
-65 to +150
°C
Note:
All voltage values are referred to V pin voltage.
SS
3.1
Recommended operating conditions
Table 3.
Symbol
Recommended operating conditions
Parameter
Value
Unit
VDD
VI
Supply voltage
20
V
V
Input voltage
0 to VDD
-55 to +125
TOP
Operating temperature
°C
8/24
Doc ID 17102 Rev 3
HCC4xxx
Package mechanical data
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
®
®
ECOPACK packages, depending on their level of environmental compliance. ECOPACK
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK is an ST trademark.
Doc ID 17102 Rev 3
9/24
Package mechanical data
HCC4xxx
Table 4.
Ceramic Flat-14 mechanical data
mm
Typ
Dim
Min
Max
A
B
C
D
E
F
6.75
9.76
1.49
0.10
7.50
6.91
9.95
7.06
10.14
1.95
0.15
7.75
0.127
7.62
1.27
0.43
6.0
G
H
L
0.38
0.48
22.0
18.75
en
M
N
0.38
4.31
Figure 2.
Ceramic Flat-14 mechanical drawings
G
D
F
H
14
8
L
N
A
H
7
1
M
E
B
C
016029E
Note:
The upper metallic lid is not electrically connected to any pins, nor to the IC die inside the
package. Connecting unused pins or metal lid to ground or to the power supply will not affect
the electrical characteristics.
10/24
Doc ID 17102 Rev 3
HCC4xxx
Package mechanical data
Table 5.
Ceramic DIL-14 mechanical data
Dim.
Mm.
Typ
Min.
Max.
A
a1
a2
B
2.1
3.00
0.63
1.82
0.40
0.20
18.79
7.36
2.54
3.70
1.14
2.39
0.50
0.30
19.20
7.87
0.88
2.03
b
0.45
b1
D
E
0.254
19.00
7.62
e
2.54
e1
e2
F
15.11
7.62
7.11
15.24
7.87
15.37
8.12
7.75
3.70
12.1 n
1.5
I
K
10.90
1.14
L
1.27
Figure 3.
Ceramic DIL-14 mechanical drawings
0016173H
Note:
The upper metallic lid is not electrically connected to any pins, nor to the IC die inside the
package. Connecting unused pins or metal lid to ground or to the power supply will not affect
the electrical characteristics.
Doc ID 17102 Rev 3
11/24
Package mechanical data
HCC4xxx
Table 6.
Ceramic Flat-16 mechanical data
mm.
Typ
Dim.
Min.
Max.
A
B
C
D
E
F
6.75
9.76
1.49
0.102
8.76
6.91
9.94
7.06
10.14
1.95
0.127
8.89
1.27
0.43
0.152
9.01
G
H
L
0.38
6.0
0.48
18.75
0.33
en
22.0
0.43
M
N
0.38
4.31
Figure 4.
Ceramic Flat-16 mechanical drawings
G
D
F
H
16
9
A
H
N
L
1
8
M
E
B
C
0016030E
Note:
The upper metallic lid is not electrically connected to any pins, nor to the IC die inside the
package. Connecting unused pins or metal lid to ground or to the power supply will not affect
the electrical characteristics.
12/24
Doc ID 17102 Rev 3
HCC4xxx
Package mechanical data
Table 7.
Ceramic DIL-16 package dimensions
Dim
mm
Typ
Min
Max
A
a1
a2
B
2.10
3.00
0.63
1.82
0.40
0.20
20.06
7.36
2.71
3.70
1.14
2.39
0.50
0.30
20.58
7.87
0.88
b
0.45
0.254
20.32
7.62
b1
D
E
e
2.54
e1
e2
F
17.65
7.62
7.29
17.78
7.87
17.90
8.12
7.70
3.83
12.10
1.50
7.49
I
K
10.90
1.14
L
Figure 5.
Ceramic DIL-16 package drawings
Note:
The upper metallic lid is not electrically connected to any pins, nor to the IC die inside the
package. Connecting unused pins or metal lid to ground or to the power supply will not affect
the electrical characteristics.
Doc ID 17102 Rev 3
13/24
Package mechanical data
HCC4xxx
Table 8.
Ceramic Flat-24 package dimensions
mm
Typ
Dim
Min
Max
A
B
C
D
E
F
10.70
15.30
1.45
11.00
15.49
11.30
15.70
1.90
0.23
0.254
13.97
1.27
0.30
13.84
1.22
14.10
1.32
G
H
L
0.45
0.508
0.55
7.25
8.25
25.00
0.45
28.00
0.55
M
N
0.508
7.01
Figure 6.
Ceramic Flat-24 package drawings
Note:
The upper metallic lid is not electrically connected to any pins, nor to the IC die inside the
package. Connecting unused pins or metal lid to ground or to the power supply will not affect
the electrical characteristics.
14/24
Doc ID 17102 Rev 3
HCC4xxx
Package mechanical data
Table 9.
Ceramic DIL-24 package dimensions
Dim
mm
Typ
Min
Max
A
a1
a2
B
2.159
1.270
0.307
1.270
0.457
.254
1.931
1.016
0.274
2.387
1.524
0.340
b1
b2
C
0.407
0.229
2.205
30.17
14.98
2.410
27.81
14.85
12.60
12.60
3.000
0.507
0.304
2.727
30.78
15.49
2.670
28.06
15.36
13.00
13.00
3.800
2.466
30.48
15.24
2.540
27.94
15.11
12.80
12.80
3.300
D
E
e
e3
F
K
K1
L
Figure 7.
Ceramic DIL-24 package drawings
0016179I
Note:
The upper metallic lid is not electrically connected to any pins, nor to the IC die inside the
package. Connecting unused pins or metal lid to ground or to the power supply will not affect
the electrical characteristics.
Doc ID 17102 Rev 3
15/24
5
Order codes
Table 10. Ordering information
ESCC detailed
Mass
(g)
Order code
Quality level
Comment
Package
Lead finish
Marking
EPPL Packing
specification
HCC4001BK 9201/041/01 or 02
HCC4001BD 9201/041/03 or 04
HCC4002BK 9201/042/01 or 02
HCC4002BD 9201/042/03 or 04
HCC4008BK 9202/039/01 or 02
HCC4008BD 9202/039/08 or 09
HCC4011BK 9201/043/01 or 02
HCC4011BD 9201/043/03 or 04
HCC4012BK 9201/044/01 or 02
HCC4012BD 9201/044/03 or 04
HCC4013BK 9203/023/01 or 02
HCC4013BD 9203/023/03 or 04
HCC4014BK 9306/014/01 or 02
HCC4014BD 9306/014/08 or 09
HCC4015BK 9306/015/01 or 02
HCC4015BD 9306/015/08 or 09
HCC4016BK 9202/050/01 or 02
HCC4016BD 9202/050/03 or 04
HCC4017BK 9204/020/01 or 02
HCC4017BD 9204/020/08 or 09
HCC4018BK 9204/021/01 or 02
HCC4018BD 9204/021/08 or 09
Flat-14
DIL-14
Flat-14
DIL-14
Flat-16
DIL-16
Flat-14
DIL-14
Flat-14
DIL-14
Flat-14
DIL-14
Flat-16
DIL-16
Flat-16
DIL-16
Flat-14
DIL-14
Flat-16
DIL-16
Flat-16
DIL-16
920104101 or 02 0.70
920104103 or 04 2.20
920104201 or 02 0.70
920104203 or 04 2.20
920203901 or 02 0.70
920203908 or 09 2.20
920104301 or 02 0.70
920104303 or 04 2.20
920104401 or 02 0.70
920104403 or 04 2.20
920302301 or 02 0.70
920302303 or 04 2.20
930601401 or 02 0.70
930601408 or 09 2.20
930601501 or 02 0.70
930601508 or 09 2.20
920205001 or 02 0.70
920205003 or 04 2.20
920402001 or 02 0.70
920402008 or 09 2.20
920402101 or 02 0.70
920402108 or 09 2.20
Y
-
-
-
-
-
Y
-
-
-
Y
ESCC flight Specify ESCC variant number in PO
Gold or solder dip
Strip pack
-
Y
-
Y
-
-
-
Y
-
-
-
Table 10. Ordering information (continued)
ESCC detailed
Mass
(g)
Order code
Quality level
Comment
Package
Lead finish
Marking
EPPL Packing
specification
HCC4019BK 9202/051/01 or 02
HCC4019BD 9202/051/08 or 09
HCC4020BK 9204/022/01 or 02
HCC4020BD 9204/022/08 or 09
HCC4021BK 9306/016/01 or 02
HCC4021BD 9306/016/08 or 09
HCC4022BK 9204/023/01 or 02
HCC4022BD 9204/023/08 or 09
HCC4023BK 9201/045/01 or 02
HCC4023BD 9201/045/03 or 04
HCC4024BK 9204/024/01 or 02
HCC4024BD 9204/024/03 or 04
Flat-16
DIL-16
Flat-16
DIL-16
Flat-16
DIL-16
Flat-16
DIL-16
Flat-14
DIL-14
Flat-14
DIL-14
920205101 or 02 0.70
920205108 or 09 2.20
920402201 or 02 0.70
920402208 or 09 2.20
930601601 or 02 0.70
930601608 or 09 2.20
920402301 or 02 0.70
920402308 or 09 2.20
920104501 or 02 0.70
920104503 or 04 2.20
920402401 or 02 0.70
920402403 or 04 2.20
Y
-
Y
-
Y
-
-
-
Y
-
Y
-
HCC4025BK 9201/046/01 or 02 ESCC flight Specify ESCC variant number in PO Flat-14 Gold or solder dip 920104601 or 02 0.70
-
-
Strip pack
HCC4025BD 9201/046/03 or 04
HCC4027BK 9203/022/01 or 02
HCC4027BD 9203/022/08 or 09
HCC4028BK 9205/010/01 or 02
HCC4028BD 9205/010/08 or 09
HCC4029BK 9204/025/01 or 02
HCC4029BD 9204/025/08 or 09
HCC4030BK 9201/047/01 or 02
HCC4030BD 9201/047/03 or 04
HCC4034BK 9306/025/01 or 02
HCC4034BD 9306/025/03 or 04
HCC4035BK 9306/018/01 or 02
DIL-14
Flat-16
DIL-16
Flat-16
DIL-16
Flat-16
DIL-16
Flat-14
DIL-14
Flat-24
DIL-24
Flat-16
920104603 or 04 2.20
920302201 or 02 0.70
920302208 or 09 2.20
920501001 or 02 0.70
920501008 or 09 2.20
920402501 or 02 0.70
920402508 or 09 2.20
920104701 or 02 0.70
920104703 or 04 2.20
930602501 or 02 1.70
930602503 or 04 5.20
930601801 or 02 0.70
Y
-
Y
-
Y
-
Y
-
-
-
Y
Table 10. Ordering information (continued)
ESCC detailed
Mass
(g)
Order code
Quality level
Comment
Package
Lead finish
Marking
EPPL Packing
specification
HCC4035BD 9306/018/08 or 09
HCC4040BK 9204/026/01 or 02
HCC4040BD 9204/026/08 or 09
HCC4041UBK 9202/040/01 or 02
HCC4041UBD 9202/040/03 or 04
HCC4042BK 9202/041/01 or 02
HCC4042BD 9202/041/08 or 09
HCC4043BK 9202/042/01 or 02
HCC4043BD 9202/042/08 or 09
HCC4044BK 9202/043/01 or 02
HCC4044BD 9202/043/08 or 09
HCC4046BK 9202/044/01 or 02
DIL-16
Flat-16
DIL-16
Flat-14
DIL-14
Flat-16
DIL-16
Flat-16
DIL-16
Flat-16
DIL-16
Flat-16
930601808 or 09 2.20
920402601 or 02 0.70
920402608 or 09 2.20
920204001 or 02 0.70
920204003 or 04 2.20
920204101 or 02 0.70
920204108 or 09 2.20
920204201 or 02 0.70
920204208 or 09 2.20
920204301 or 02 0.70
920204308 or 09 2.20
920204401 or 02 0.70
-
Y
-
-
-
-
-
-
-
-
-
-
HCC4046BD 9202/044/08 or 09 ESCC flight Specify ESCC variant number in PO DIL-16 Gold or solder dip 920204408 or 09 2.20
-
Y
-
Strip pack
HCC4047BK 9207/003/01 or 02
HCC4047BD 9207/003/03 or 04
HCC4049UBK 9202/045/01 or 02
HCC4049UBD 9202/045/08 or 09
HCC4050BK 9202/046/01 or 02
HCC4050BD 9202/046/08 or 09
HCC4051BK 9202/047/01 or 02
HCC4051BD 9202/047/08 or 09
HCC4052BK 9202/048/01 or 02
HCC4052BD 9202/048/08 or 09
HCC4053BK 9202/049/01 or 02
HCC4053BD 9202/049/08 or 09
Flat-14
DIL-14
Flat-16
DIL-16
Flat-16
DIL-16
Flat-16
DIL-16
Flat-16
DIL-16
Flat-16
DIL-16
920700301 or 02 0.70
920700303 or 04 2.20
920204501 or 02 0.70
920204508 or 09 2.20
920204601 or 02 0.70
920204608 or 09 2.20
920204701 or 02 0.70
920204708 or 09 2.20
920204801 or 02 0.70
920204808 or 09 2.20
920204901 or 02 0.70
920204908 or 09 2.20
Y
-
Y
-
Y
-
-
-
-
-
Table 10. Ordering information (continued)
ESCC detailed
Mass
(g)
Order code
Quality level
Comment
Package
Lead finish
Marking
EPPL Packing
specification
HCC4060BK 9204/052/01 or 02
HCC4060BD 9204/052/08 or 09
HCC4063BK 9209/001/01 or 02
HCC4063BD 9209/001/08 or 09
HCC4066BK 9408/005/01 or 02
HCC4066BD 9408/005/03 or 04
HCC4067BK 9408/009/01 or 02
HCC4067BD 9408/009/03 or 04
HCC4068BK 9201/061/01 or 02
HCC4068BD 9201/061/03 or 04
HCC4069UBK 9401/010/01 or 02
HCC4069UBD 9401/010/03 or 04
Flat-16
DIL-16
Flat-16
DIL-16
Flat-14
DIL-14
Flat-24
DIL-24
Flat-14
DIL-14
Flat-14
DIL-14
920405201 or 02 0.70
920405208 or 09 2.20
920900101 or 02 0.70
920900108 or 09 2.20
940800501 or 02 0.70
940800503 or 04 2.20
940800901 or 02 1.70
940800903 or 04 5.20
920106101 or 02 0.70
920106103 or 04 2.20
940101001 or 02 0.70
940101003 or 04 2.20
-
-
Y
-
Y
-
-
-
-
-
Y
-
HCC4070BK 9201/048/01 or 02 ESCC flight Specify ESCC variant number in PO Flat-14 Gold or solder dip 920104801 or 02 0.70
-
-
Strip pack
HCC4070BD 9201/048/03 or 04
HCC4071BK 9201/063/01 or 02
HCC4071BD 9201/063/03 or 04
HCC4072BK 9201/082/01 or 02
HCC4072BD 9201/082/03 or 04
HCC4073BK 9201/064/01 or 02
HCC4073BD 9201/064/03 or 04
HCC4075BK 9201/065/01 or 02
HCC4075BD 9201/065/03 or 04
HCC4076BK 9306/022/01 or 02
HCC4076BD 9306/022/08 or 09
HCC4077BK 9201/055/01 or 02
DIL-14
Flat-14
DIL-14
Flat-14
DIL-14
Flat-14
DIL-14
Flat-14
DIL-14
Flat-16
DIL-16
Flat-14
920104803 or 04 2.20
920106301 or 02 0.70
920106303 or 04 2.20
920108201 or 02 0.70
920108203 or 04 2.20
920106401 or 02 0.70
920106403 or 04 2.20
920106501 or 02 0.70
920106503 or 04 2.20
930602201 or 02 0.70
930602208 or 09 2.20
920105501 or 02 0.70
Y
-
-
-
Y
-
-
-
Y
-
-
Table 10. Ordering information (continued)
ESCC detailed
Mass
(g)
Order code
Quality level
Comment
Package
Lead finish
Marking
EPPL Packing
specification
HCC4077BD 9201/055/03 or 04
HCC4078BK 9201/062/01 or 02
HCC4078BD 9201/062/03 or 04
HCC4081BK 9201/052/01 or 02
HCC4081BD 9201/052/03 or 04
HCC4082BK 9201/066/01 or 02
HCC4082BD 9201/066/03 or 04
HCC4093BK 9409/002/01 or 02
HCC4093BD 9409/002/03 or 04
HCC4094BK 9306/026/01 or 02
HCC4094BD 9306/026/08 or 09
DIL-14
Flat-14
DIL-14
Flat-14
DIL-14
Flat-14
DIL-14
Flat-14
DIL-14
Flat-16
DIL-16
920105503 or 04 2.20
920106201 or 02 0.70
920106203 or 04 2.20
920105201 or 02 0.70
920105203 or 04 2.20
920106601 or 02 0.70
920106603 or 04 2.20
940900201 or 02 0.70
940900203 or 04 2.20
930602601 or 02 0.70
930602608 or 09 2.20
-
-
-
Y
-
-
-
Y
-
Y
-
HCC4098BK 9206/003/01 or 02 ESCC flight Specify ESCC variant number in PO Flat-16 Gold or solder dip 920600301 or 02 0.70
Y
-
Strip pack
HCC4098BD 9206/003/08 or 09
HCC4099BK 9202/058/01 or 02
HCC4099BD 9202/058/08 or 09
HCC40103BK 9204/036/01 or 02
HCC40103BD 9204/036/08 or 09
HCC40106BK 9409/005/01 or 02
HCC40106BD 9409/005/03 or 04
HCC40107BK 9401/013/01 or 02
HCC40107BD 9401/013/03 or 04
HCC40109BK 9407/003/01 or 02
HCC40109BD 9407/003/08 or 09
DIL-16
Flat-16
DIL-16
Flat-16
DIL-16
Flat-14
DIL-14
Flat-14
DIL-14
Flat-16
DIL-16
920600308 or 09 2.20
920205801 or 02 0.70
920205808 or 09 2.20
920403601 or 02 0.70
920403608 or 09 2.20
940900501 or 02 0.70
940900503 or 04 2.20
940101301 or 02 0.70
940101303 or 04 2.20
940700301 or 02 0.70
940700308 or 09 2.20
Y
-
Y
-
Y
-
Y
-
Y
-
Table 10. Ordering information (continued)
ESCC detailed
Mass
(g)
Order code
Quality level
Comment
Package
Lead finish
Marking
EPPL Packing
specification
HCC40161BK 9204/054/01 or 02
HCC40161BD 9204/054/08 or 09
HCC40174BK 9203/038/01 or 02
HCC40174BD 9203/038/08 or 09
HCC40193BK 9204/041/01 or 02
HCC40193BD 9204/041/08 or 09
HCC4502BK 9401/006/01 or 02
HCC4502BD 9401/006/08 or 09
HCC4503BK 9401/030/01 or 02
HCC4503BD 9401/030/08 or 09
HCC4508BK 9202/063/01 or 02
HCC4508BD 9202/063/03 or 04
Flat-16
DIL-16
Flat-16
DIL-16
Flat-16
DIL-16
Flat-16
DIL-16
Flat-16
DIL-16
Flat-24
DIL-24
920405401 or 02 0.70
920405408 or 09 2.20
920303801 or 02 0.70
920303808 or 09 2.20
920404101 or 02 0.70
920404108 or 09 2.20
940100601 or 02 0.70
940100608 or 09 2.20
940103001 or 02 0.70
940103008 or 09 2.20
920206301 or 02 1.70
920206303 or 04 5.20
Y
-
Y
-
-
-
Y
-
Y
-
Y
-
HCC4512BK 9408/006/01 or 02 ESCC flight Specify ESCC variant number in PO Flat-16 Gold or solder dip 940800601 or 02 0.70
Y
-
-
-
-
-
-
-
-
-
-
-
-
Strip pack
HCC4512BD 9408/006/08 or 09
HCC4514BK 9408/012/01 or 02
HCC4514BD 9408/012/03 or 04
HCC4515BK 9205/011/01 or 02
HCC4515BD 9205/011/03 or 04
HCC4516BK 9204/045/01 or 02
HCC4516BD 9204/045/08 or 09
HCC4520BK 9204/028/01 or 02
HCC4520BD 9204/028/08 or 09
HCC4532BK 9202/065/01 or 02
HCC4532BD 9202/065/08 or 09
HCC4538BK 9207/007/01 or 02
DIL-16
Flat-24
DIL-24
Flat-24
DIL-24
Flat-16
DIL-16
Flat-16
DIL-16
Flat-16
DIL-16
Flat-16
940800608 or 09 2.20
940801201 or 02 1.70
940801203 or 04 5.20
920501101 or 02 1.70
920501103 or 04 5.20
920404501 or 02 0.70
920404508 or 09 2.20
920402801 or 02 0.70
920402808 or 09 2.20
920206501 or 02 0.70
920206508 or 09 2.20
920700701 or 02 0.70
Table 10. Ordering information (continued)
ESCC detailed
Mass
(g)
Order code
Quality level
Comment
Package
Lead finish
Marking
EPPL Packing
specification
HCC4538BD 9207/007/08 or 09
HCC4555BK 9408/011/01 or 02
DIL-16
Flat-16
920700708 or 09 2.20
940801101 or 02 0.70
-
Y
HCC4555BD 9408/011/08 or 09 ESCC flight Specify ESCC variant number in PO DIL-16 Gold or solder dip 940801108 or 09 2.20
-
-
-
Strip pack
HCC4556BK 9408/025/01 or 02
HCC4556BD 9408/025/08 or 09
Flat-16
DIL-16
940802501 or 02 0.70
940802508 or 09 2.20
Note:
Contact ST sales office for information about the specific conditions for other CMOS4000 part numbers and product in die form
HCC4xxx
Revision history
6
Revision history
Table 11. Document revision history
Date
Revision
Changes
24-Mar-2010
29-Mar-2010
1
2
First release
Updated coverpage description
Added Note: on page 10, Note: on page 11, Note: on page 12, Note:
on page 13, Note: on page 14, Note: on page 15 and in the “Pin
connections” diagram on the coverpage.
10-Aug-2011
3
Doc ID 17102 Rev 3
23/24
HCC4xxx
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2011 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
24/24
Doc ID 17102 Rev 3
相关型号:
©2020 ICPDF网 联系我们和版权申明