HCF4060YM013TR [STMICROELECTRONICS]
14-stage ripple carry binary counter/divider and oscillator; 14级纹波进位二进制计数器/除法器和振荡器
| 型号： | HCF4060YM013TR |
| 厂家： | 
ST |
| 描述： | 14-stage ripple carry binary counter/divider and oscillator |
| 文件： | 总15页 (文件大小：625K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HCF4060
14-stage ripple carry binary counter/divider and oscillator
Datasheet - production data
Applications
• Automotive
• Industrial
• Computer
• Consumer
Description
The HCF4060 device is a monolithic integrated
circuit fabricated in MOS (metal oxide
semiconductor) technology available in SO16 and
PDIP16 packages.
Features
• Medium speed operation
• Common reset
The HCF4060 device consists of an oscillator
section and 14 ripple carry binary counter stages.
• Fully static operation
The oscillator configuration allows design of either
RC or crystal oscillator circuits. A RESET input is
provided which resets the counter to the all 0’s
state and disables the oscillator. A high level on
the RESET line accomplishes the reset function.
All counter stages are master slave flip-flops. The
state of the counter is advanced one step in
• Buffered inputs and outputs
• Quiescent current specified up to 20 V
• 5 V, 10 V and 15 V parametric ratings
• Input leakage current: I = 100 nA (max.)
I
at V = 18 V, T = 25 °C
DD
A
• 100% tested for quiescent current
binary order on the negative transition of φ (and
1
• ESD performance
– HBM: 1 kV
φ ). All inputs and outputs are fully buffered.
0
Schmitt trigger action on the clock pin permits
unlimited clock rise and fall time.
– MM: 200 V
– CDM: 1 kV
Table 1. Device summary
Temperature range Package
Order code
Packaging
Marking
HCF4060M013TR
HCF4060YM013TR(1)
HCF4060BEY
-55/+125 °C
-40/+125 °C
-55/+125 °C
SO16
SO16 (automotive version)
PDIP16
Tape and reel
Tape and reel
Tube
HCF4060
HCF4060Y
HCF4066BE
1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC
Q001 and Q002 or equivalent.
May 2013
DocID2055 Rev 6
1/15
This is information on a product in full production.
www.st.com
15
Contents
HCF4060
Contents
1
2
3
4
Pin information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Functional description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.1
4.2
PDIP16 (0.25) package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
SO16 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5
6
Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2/15
DocID2055 Rev 6
HCF4060
Pin information
1
Pin information
Figure 1. Pin connection
Table 2. Pin description
Symbol
Pin no.
Name and function
1, 2, 3 ,4, 5, 6, 7, 13, 14, 15
Q
12, Q13, Q14, Q6, Q5, Q7, Q4, Q9, Q8, Q10
Outputs
Oscillator input
9, 10, 11
Φ , Φ , Φ
1
0
0
12
8
RESET
VSS
Reset
Negative supply voltage
Positive supply voltage
16
VDD
DocID2055 Rev 6
3/15
Functional description
HCF4060
2
Functional description
Figure 2. Logic diagram
Figure 3. Functional diagram
/&ꢀꢁꢂꢀꢁ
4/15
DocID2055 Rev 6
HCF4060
Functional description
Figure 4. Input equivalent circuit
DocID2055 Rev 6
5/15
Electrical characteristics
HCF4060
3
Electrical characteristics
Absolute maximum ratings are those values beyond which damage to the device may occur.
Functional operation under these conditions is not implied. All voltage values are referred to
V
pin voltage.
SS
Table 3. Absolute maximum ratings
Parameter
Symbol
Value
Unit
VDD
VI
Supply voltage
DC input voltage
DC input current
-0.5 to +22
-0.5 to VDD + 0.5
10
V
II
mA
mW
Power dissipation per package
Power dissipation per output transistor
Operating temperature
200
PD
100
Top
-55 to +125
-65 to +150
°C
Tstg
Storage temperature
Table 4. Recommended operating conditions
Symbol
Parameter
Value
Unit
VDD
VI
Supply voltage
3 to 20
0 to VDD
-55 to 125
V
Input voltage
Top
Operating temperature
°C
6/15
DocID2055 Rev 6
HCF4060
Electrical characteristics
(1)
Table 5. DC specifications
Test condition
Value
-40 to 85 °C -55 to 125 °C Unit
Min. Typ. Max. Min. Max. Min. Max.
Symbol
Parameter
TA = 25 °C
VI
VO
(V)
|IO| VDD
(μA) (V)
(V)
0/5
0/10
0/15
0/20
0/5
5
0.04
0.04
0.04
5
5
150
300
10
15
20
10
20
10
Quiescent
current
IL
μA
20
600
0.08 100
100
3000
<1
<1
5
4.95
4.95
9.95
4.95
9.95
High level output 0/10
voltage
0/15
10 9.95
VOH
14.9
14.9
5
14.9
5
<1
15
5
5/0
<1
<1
<1
<1
<1
5
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
0.05
Low level output
voltage
VOL
VIH
VIL
10/0
10
15
15/0
V
0.5/4.5
1/9
5
10
15
5
3.5
7
3.5
7
3.5
7
High level input
voltage
1.5/13.5 <1
11
11
11
4.5/0.5
9/1
<1
<1
1.5
3
1.5
3
1.5
3
Low level input
voltage
10
15
5
13.5/1.5 <1
4
4
4
0/5
2.5
4.6
9.5
13.5
0.4
0.5
1.5
<1
<1
<1
<1
<1
<1
<1
-1.36 -3.2
-0.44 -1
-1.15
-0.36
-0.9
-2.4
0.36
0.9
-1.1
-0.36
-0.9
-2.4
0.36
0.9
0/5
5
Output drive
current
IOH
0/10
10 -1.1 -2.6
15 -3.0 -6.8
0/15
0/5
mA
5
0.44
1.1
1
Output sink
current
IOL
0/10
10
15
2.6
6.8
0/15
3.0
2.4
2.4
Input leakage
0/18
II
Any input
Any input
18
±10-5 ±0.3
±0.3
1
μA
current
Input
capacitance
CI
5
7.5
pF
1. The noise margin for both “1” and “0” level is: 1 V min. with VDD = 5 V, 2 V min. with VDD = 10 V, 2.5 V min. with VDD = 15 V.
DocID2055 Rev 6
7/15
Electrical characteristics
(T
HCF4060
Unit
Table 6. Dynamic electrical characteristics
= 25 °C, C = 50 pF, R = 200 KΩ, t = t = 20 ns)
amb
L
L
r
f
Test condition
Value(1)
Symbol
Parameter
VDD (V)
Min. Typ. Max.
5
100 200
tTLH, tTHL Output transition time
10
15
5
50
40
100
80
370 740
150 300
100 200
100 200
tPLH, tPHL Propagation delay time (φ to Q4 out)
10
15
5
ns
tPLH, tPHL Propagation delay time (Qn to Qn+1
)
10
15
5
50
40
50
20
15
100
80
100
40
tW
Input pulse width
10
15
5
f = 100 KHz
30
tr, tf
Input pulse rise and fall time
Maximum clock input frequency
10
15
5
Unlimited
μs
3.5
8
7
fmax
10
15
16
24
MHz
12
Reset operation
5
180 360
tPHL
Propagation delay time
10
15
5
80
50
60
30
20
160
100
120
60
ns
tW
Input pulse width
10
15
40
RC operation
5
18 21.5 25
Variation of frequency
(unit-to-unit)
Cx = 200 pF, Rs = 560 KΩ,
Rx = 50 KΩ
10
15
20
23
26
27
2
21.1 24
KHz
Variation of frequency with voltage
change
5 to 10 Cx= 200 pF, Rs = 560 KΩ,
Rx = 50 KΩ
10 to 15
1
(the same unit)
8/15
DocID2055 Rev 6
HCF4060
Electrical characteristics
Table 6. Dynamic electrical characteristics
= 25 °C, C = 50 pF, R = 200 KΩ, t = t = 20 ns) (continued)
(T
amb
L
L
r
f
Test condition
Value(1)
Unit
Symbol
Parameter
VDD (V)
Min. Typ. Max.
5
Cx = 10 μF
Cx = 50 μF
Cx = 10 μF
Rx = 500 KΩ
Rx = 300 KΩ
Rx = 300 KΩ
20
RX
10
15
5
20
MΩ
10
1000
50
CX
10
15
10
15
μF
50
530 650 810
690 800 940
Maximum oscillator frequency(2)
Rx = 5 KΩ, Cx = 15 pF
pF
1. Typical temperature coefficient for all VDD values is 0.3 %/°C, all input rise and fall times = 20 ns.
2. RC oscillator applications are not recommended at supply voltages below 7 V for RX = 50 KΩ.
DocID2055 Rev 6
9/15
Electrical characteristics
HCF4060
Figure 5. Detail of typical flip-flop stage
/&ꢀꢁꢂꢃꢁ
Figure 6. Typical RC oscillator circuit
Figure 7. Typical crystal oscillator circuit
10/15
DocID2055 Rev 6
HCF4060
Package information
4
Package information
In order to meet environmental requirements, ST offers these devices in different grades of
®
ECOPACK packages, depending on their level of environmental compliance. ECOPACK
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK is an ST trademark.
DocID2055 Rev 6
11/15
Package information
HCF4060
4.1
PDIP16 (0.25) package information
Figure 8. PDIP16 (0.25) package mechanical drawing
Table 7. PDIP16 (0.25) package mechanical data
Dimensions
Symbol
mm
inch
Typ.
Min.
Typ.
Max.
Min.
Max.
a1
B
b
0.51
0.77
0.020
0.030
1.65
0.065
0.5
0.020
0.010
b1
D
E
e
0.25
20
0.787
8.5
2.54
17.78
0.335
0.100
0.700
e3
F
7.1
5.1
0.280
0.201
I
L
3.3
0.130
Z
1.27
0.050
12/15
DocID2055 Rev 6
HCF4060
Package information
4.2
SO16 package information
Figure 9. SO16 package mechanical drawing
32ꢀꢃ+
Table 8. SO16 package mechanical data
Dimensions
Symbol
mm
inch
Min.
Typ.
Max.
Min.
Typ.
Max.
A
a1
a2
b
1.75
0.2
0.068
0.008
0.064
0.018
0.010
0.1
0.004
1.65
0.46
0.25
0.35
0.19
0.013
0.007
b1
C
0.5
0.019
c1
D
45° (typ.)
9.8
5.8
10
0.385
0.228
0.393
0.244
E
6.2
e
1.27
8.89
0.050
0.350
e3
F
3.8
4.6
0.5
4.0
5.3
0.149
0.181
0.019
0.157
0.208
0.050
0.024
G
L
1.27
0.62
M
S
8 ° (max.)
DocID2055 Rev 6
13/15
Ordering information
HCF4060
5
Ordering information
Table 9. Order codes
Temperature
Order code
Package
Packaging
Marking
range
HCF4060M013TR
HCF4060YM013TR(1)
HCF4060BEY
-55/+125 °C
SO16
HCF4060
HCF4060Y
HCF4066BE
Tape and reel
Tube
SO16
(automotive version)
-40/+125 °C
-55/+125 °C
PDIP16
1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening
according to AEC Q001 and Q002 or equivalent.
6
Revision history
Table 10. Document revision history
Date
Revision
Changes
Updated Features (added ESD values), added Applications.
Updated Table 1 (reformatted table, added order codes, temperature
range, marking, updated package and packaging, added note 1.).
Moved Description to page 2, updated Description (unified part
29-Oct-2012
5
numbers and package names).
Updated Section 2 to Section 4 (added titles and numbering).
Reformatted Section 4 (added ECOPACK text, Figure 8, Figure 9,
Table 7 and Table 8, unified package names).
Minor corrections throughout document.
Updated Features (ESD values)
Added Ordering information
02-May-2013
6
14/15
DocID2055 Rev 6
HCF4060
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT AUTHORIZED FOR USE IN WEAPONS. NOR ARE ST PRODUCTS DESIGNED OR AUTHORIZED FOR USE
IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH
PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B) AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR
ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED
FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN
WRITING OF SUCH USAGE, UNLESS A PRODUCT IS EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE,
AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS.
PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE DEEMED SUITABLE FOR USE IN AEROSPACE BY THE
CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2013 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
DocID2055 Rev 6
15/15
©2020 ICPDF网 联系我们和版权申明