KD1084DT-R [STMICROELECTRONICS]
5A Low drop positive voltage regulator adjustable and fixed; 图5A低压差正电压调节器调节和固定型号: | KD1084DT-R |
厂家: | ST |
描述: | 5A Low drop positive voltage regulator adjustable and fixed |
文件: | 总22页 (文件大小:350K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
KD1084 series
5A Low drop positive voltage regulator adjustable and fixed
Features
■ Typical dropout 1.3V (at 5A)
■ Three terminal adjustable or fixed output
voltage 1.8V, 2.5V, 3.3V.
■ Guaranteed output current up to 5A
DPAK
TO-220
■ Output tolerance 1ꢀ at 25°C and 2ꢀ in full
temperature range for the "A" version
■ Output tolerance 2ꢀ at 25°C and 3ꢀ ꢁn full
temperature range internal power and thermal
limit
D2PAK
■ Wide operating temp. range -40°C to 125°C
2
■ Package available: TO-220, D PAK, DPAK
better performances in term of drop and output
tolerance. A 2.85V output version is suitable for
SCSꢁ-2 active termination. Unlike PNP regulators,
where a part of the output current is wasted as
quiescent current, the KD1084 quiescent current
flows into the load, so increase efficiency. Only a
10µF minimum capacitor is need for stability.
■ Pinout compatibility with standard adjustable
VREG
Description
The KD1084 is a LOW DROP Voltage Regulator
able to provide up to 5A of Output Current.
Dropout is guaranteed at a maximum of 1.5V at
the maximum output current, decreasing at lower
loads. The KD1084 is pin to pin compatible with
he older 3-terminal adjustable regulators but has
2
The devices are supplied in TO-220, D PAK and
DPAK. On chip trimming allows the regulator to
reach a very tight output voltage tolerance, within
1ꢀ at 25°C for "A" version and 2ꢀ at 25°C for
standard version.
Schematic diagram
May 2007
Rev. 6
1/22
www.st.com
22
KD1084 series
Contents
1
2
3
4
5
6
7
8
Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Schematic application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Typical application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Order codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2/22
KD1084 series
Pin configuration
1
Pin configuration
Figure 1.
Pin connections (top view)
TO-220
DPAK
D2PAK
3/22
Maximum ratings
KD1084 series
2
Maximum ratings
Table 1.
Absolute maximum ratings
Parameter
Symbol
Value
Unit
Vꢁ
ꢁO
DC ꢁnput voltage
12
V
mA
mW
°C
Output current
ꢁnternally Limited
ꢁnternally Limited
-55 to +150
PD
Power dissipation
TSTG
TOP
Storage temperature range
Operating junction temperature range
-40 to +125
°C
Note:
Absolute Maximum Ratings are those values beyond which damage to the device may
occur. Functional operation under these condition is not implied
Table 2.
Symbol
Thermal Data
Parameter
TO-220
DPAK
D2PAK
Unit
RthJC
RthJA
Thermal resistance junction-case
Thermal resistance junction-ambient
3
8
3
°C/W
°C/W
50
100
62.5
4/22
KD1084 series
Schematic application
3
Schematic application
Figure 2.
Application circuit
R2
⎛
⎝
⎞
⎠
VO = VREF
⋅
1 + ------
R1
5/22
Electrical characteristics
KD1084 series
4
Electrical characteristics
Table 3.
Electrical characteristics of KD1084A#18 (V = 4.8V, C = C = 10µF(Tant.),
ꢁ ꢁ O
T = -40 to 125°C, unless otherwise specified)
A
Symbol
Parameter
Test Conditions
O = 0 mA, TJ = 25°C
ꢁO = 0 to 5A, Vꢁ = 3.4 to 10V
O = 0 mA, Vꢁ = 3.4 to 10V TJ = 25°C
ꢁO = 0 mA, Vꢁ = 3.4 to 10V
Min.
Typ.
Max.
Unit
ꢁ
1.782
1.764
1.8
1.8
0.5
1
1.818
1.836
6
V
V
VO
Output voltage
ꢁ
mV
mV
mV
V
ΔVO
ΔVO
Line regulation
Load regulation
6
ꢁ
O = 0 to 5A, TJ = 25°C
O = 0 to 5A
3
15
ꢁ
7
20
Vd
ꢁq
Dropout voltage
ꢁO = 5 A
1.3
5
1.5
10
V
Quiescent current
Short circuit current
Thermal regulation
Vꢁ ≤10V
mA
A
ꢁsc
Vꢁ - VO = 5V
TA = 25°C, 30ms pulse
5.5
60
7
0.003 0.015
75
ꢀ/W
f = 120 Hz, CO = 25µF, ꢁO = 5A
Vꢁ = 5.3 ± ± 1.5V
SVR Supply voltage rejection
dB
ꢀ
RMS Output noise voltage
(ꢀ of VO)
eN
TA = 25°C, f = 10Hz to 10KHz
TA = 125°C, 1000Hrs
0.003
S
S
Temperature stability
Long term stability
0.5
0.5
ꢀ
ꢀ
6/22
KD1084 series
Electrical characteristics
Table 4.
Electrical characteristics of KD1084A#25 (V = 5.5V, C = C = 10µF(Tant.),
ꢁ
ꢁ
O
T = -40 to 125°C, unless otherwise specified)
A
Symbol
Parameter
Test Conditions
O = 0 mA, TJ = 25°C
ꢁO = 0 to 5A, Vꢁ = 4.1 to 10V
O = 0 mA, Vꢁ = 4.1 to 10V TJ = 25°C
ꢁO = 0 mA, Vꢁ = 4.1 to 10V
Min.
Typ.
Max.
Unit
ꢁ
2.475
2.45
2.5
2.5
0.5
1
2.525
2.55
6
V
V
VO
Output voltage
ꢁ
mV
mV
mV
V
ΔVO
ΔVO
Line regulation
Load regulation
6
ꢁ
O = 0 to 5A, TJ = 25°C
O = 0 to 5A
3
15
ꢁ
7
20
Vd
ꢁq
Dropout voltage
ꢁO = 5 A
1.3
5
1.5
10
V
Quiescent current
Short circuit current
Thermal regulation
Vꢁ ≤10V
mA
A
ꢁsc
Vꢁ - VO = 5V
TA = 25°C, 30ms pulse
5.5
60
7
0.003 0.015
72
ꢀ/W
f = 120 Hz, CO = 25µF, ꢁO = 5A
Vꢁ = 6 ± ± 1.5V
SVR Supply voltage rejection
dB
ꢀ
RMS Output noise voltage
(ꢀ of VO)
eN
TA = 25°C, f = 10Hz to 10KHz
TA = 125°C, 1000Hrs
0.003
S
S
Temperature stability
Long term stability
0.5
0.5
ꢀ
ꢀ
Table 5.
Electrical characteristics of KD1084A#33 (V = 6.3V, C = C = 10µF(Tant.),
ꢁ ꢁ O
T = -40 to 125°C, unless otherwise specified)
A
Symbol
Parameter
Test Conditions
O = 0 mA, TJ = 25°C
O = 0 to 5A, Vꢁ = 4.9 to 10V
O = 0 mA, Vꢁ = 4.9 to 10V TJ = 25°C
Min.
Typ.
Max.
Unit
ꢁ
ꢁ
ꢁ
3.267
3.234
3.3
3.35
0.5
1
3.333
3.366
6
V
V
VO
Output voltage
mV
mV
mV
V
ΔVO
ΔVO
Line regulation
Load regulation
ꢁO = 0 mA, Vꢁ = 4.9 to 10V
ꢁO = 0 to 5A, TJ = 25°C
ꢁO = 0 to 5A
6
3
15
7
20
Vd
ꢁq
Dropout voltage
ꢁO = 5 A
1.3
5
1.5
10
V
Quiescent current
Short circuit current
Thermal regulation
Vꢁ ≤10V
mA
A
ꢁsc
Vꢁ - VO = 5V
5.5
60
7
TA = 25°C, 30ms pulse
0.003 0.015
72
ꢀ/W
f = 120 Hz, CO = 25µF, ꢁO = 5A
Vꢁ = 6.8 ± ± 1.5V
SVR Supply voltage rejection
dB
ꢀ
RMS Output noise voltage
(ꢀ of VO)
eN
TA = 25°C, f = 10Hz to 10KHz
TA = 125°C, 1000Hrs
0.003
S
S
Temperature stability
Long term stability
0.5
0.5
ꢀ
ꢀ
7/22
Electrical characteristics
KD1084 series
Table 6.
Electrical characteristics of KD1084A (V = 4.25V, C = C = 10µF(Tant.),
ꢁ ꢁ O
T = -40 to 125°C, unless otherwise specified)
A
Symbol
Parameter
Test Conditions
O = 10 mA, TJ = 25°C
ꢁO = 10 mA to 5A, Vꢁ = 2.85 to 10V
O = 10 mA, Vꢁ = 2.85 to 10V TJ = 25°C
ꢁO = 10 mA, Vꢁ = 2.85 to 10V
Min.
Typ.
Max.
Unit
ꢁ
1.237
1.225
1.25
1.25
0.015
0.035
0.1
1.263
1.275
0.2
V
V
VO
Output voltage
ꢁ
mV
mV
mV
V
ΔVO
Line regulation
0.2
ꢁ
O = 10 mA to 5A, TJ = 25°C
O = 10 mA to 5A
0.3
ΔVO
Load regulation
Dropout voltage
ꢁ
0.2
0.4
Vd
ꢁO = 5 A
1.3
1.5
V
ꢁO(min) Quiescent current
Vꢁ ≤10V
3
10
mA
A
ꢁsc
Short circuit current
Thermal regulation
Vꢁ - VO = 5V
TA = 25°C, 30ms pulse
5.5
60
7
0.003 0.015
72
ꢀ/W
f = 120 Hz, CO = 25µF, CADJ = 25µF,
ꢁO = 5A, Vꢁ = 4.75 ± ± 1.5V
SVR Supply voltage rejection
ꢁADJ Adjust pin current
dB
Vꢁ = 4.25V, ꢁO = 10 mA
55
120
5
µA
µA
ΔꢁADJ Adjust pin current change Vꢁ = 2.85 to 10V, ꢁO = 10 mA to 5A
0.2
RMS Output noise voltage
(ꢀ of VO)
eN
TA = 25°C, f = 10Hz to 10KHz
TA = 125°C, 1000Hrs
0.003
ꢀ
S
S
Temperature stability
Long term stability
0.5
0.5
ꢀ
ꢀ
8/22
KD1084 series
Electrical characteristics
Table 7.
Electrical characteristics of KD1084#18 (V = 4.8V, C = C = 10µF(Tant.),
ꢁ ꢁ O
T = -40 to 125°C, unless otherwise specified)
A
Symbol
Parameter
Test Conditions
O = 0 mA, TJ = 25°C
ꢁO = 0 to 5A, Vꢁ = 3.4 to 10V
O = 0 mA, Vꢁ = 3.4 to 10V TJ = 25°C
ꢁO = 0 mA, Vꢁ = 3.4 to 10V
Min.
Typ.
Max.
Unit
ꢁ
1.764
1.746
1.8
1.8
0.5
1
1.836
1.854
6
V
V
VO
Output voltage
ꢁ
mV
mV
mV
V
ΔVO
ΔVO
Line regulation
Load regulation
6
ꢁ
O = 0 to 5A, TJ = 25°C
O = 0 to 5A
3
15
ꢁ
7
20
Vd
ꢁq
Dropout voltage
ꢁO = 5 A
1.3
5
1.5
10
V
Quiescent current
Short circuit current
Thermal regulation
Vꢁ ≤10V
mA
A
ꢁsc
Vꢁ - VO = 5V
TA = 25°C, 30ms pulse
5.5
60
7
0.003 0.015
75
ꢀ/W
f = 120 Hz, CO = 25µF, ꢁO = 5A
Vꢁ = 5.3 ± ± 1.5V
SVR Supply voltage rejection
dB
ꢀ
RMS Output noise voltage
(ꢀ of VO)
eN
TA = 25°C, f = 10Hz to 10KHz
TA = 125°C, 1000Hrs
0.003
S
S
Temperature stability
Long term stability
0.5
0.5
ꢀ
ꢀ
Table 8.
Electrical characteristics of KD1084#25 (V = 5.5V, C = C = 10µF(Tant.),
ꢁ ꢁ O
T = -40 to 125°C, unless otherwise specified)
A
Symbol
Parameter
Test Conditions
O = 0 mA, TJ = 25°C
O = 0 to 5A, Vꢁ = 4.1 to 10V
O = 0 mA, Vꢁ = 4.1 to 10V TJ = 25°C
Min.
Typ.
Max.
Unit
ꢁ
ꢁ
ꢁ
2.45
2.5
2.5
0.5
1
2.55
2.575
6
V
V
VO
Output voltage
2.425
mV
mV
mV
V
ΔVO
ΔVO
Line regulation
Load regulation
ꢁO = 0 mA, Vꢁ = 4.1 to 10V
O = 0 to 5A, TJ = 25°C
6
ꢁ
3
15
ꢁO = 0 to 5A
ꢁO = 5 A
7
20
Vd
ꢁq
Dropout voltage
1.3
5
1.5
10
V
Quiescent current
Short circuit current
Thermal regulation
Vꢁ ≤10V
mA
A
ꢁsc
Vꢁ - VO = 5V
TA = 25°C, 30ms pulse
5.5
60
7
0.003 0.015
72
ꢀ/W
f = 120 Hz, CO = 25µF, ꢁO = 5A
Vꢁ = 6 ± ± 1.5V
SVR Supply voltage rejection
dB
ꢀ
RMS Output noise voltage
(ꢀ of VO)
eN
TA = 25°C, f = 10Hz to 10KHz
TA = 125°C, 1000Hrs
0.003
S
S
Temperature stability
Long term stability
0.5
0.5
ꢀ
ꢀ
9/22
Electrical characteristics
KD1084 series
Table 9.
Electrical characteristics of KD1084#33 (V = 5.85V, C = C = 10µF(Tant.),
ꢁ ꢁ O
T = -40 to 125°C, unless otherwise specified)
A
Symbol
Parameter
Test Conditions
O = 0 mA, TJ = 25°C
ꢁO = 0 to 5A, Vꢁ = 4.9 to 10V
O = 0 mA, Vꢁ = 4.9 to 10V TJ = 25°C
ꢁO = 0 mA, Vꢁ = 4.9 to 10V
Min.
Typ.
Max.
Unit
ꢁ
3.234
3.2
3.3
3.3
0.5
1
3.366
3.4
6
V
V
VO
Output voltage
ꢁ
mV
mV
mV
V
ΔVO
ΔVO
Line regulation
Load regulation
6
ꢁ
O = 0 to 5A, TJ = 25°C
O = 0 to 5A
3
15
20
1.5
10
ꢁ
7
Vd
ꢁq
Dropout voltage
ꢁO = 5 A
1.3
5
V
Quiescent current
Short circuit current
Thermal regulation
Vꢁ ≤10V
mA
A
ꢁsc
Vꢁ - VO = 5V
TA = 25°C, 30ms pulse
5.5
60
7
0.003 0.015
72
ꢀ/W
f = 120 Hz, CO = 25µF, ꢁO = 5A
Vꢁ = 6.8 ± ± 1.5V
SVR Supply voltage rejection
dB
ꢀ
RMS Output noise voltage
(ꢀ of VO)
eN
TA = 25°C, f = 10Hz to 10KHz
TA = 125°C, 1000Hrs
0.003
S
S
Temperature stability
Long term stability
0.5
0.5
ꢀ
ꢀ
10/22
KD1084 series
Electrical characteristics
Table 10. Electrical characteristics of KD1084 (V = 4.25V, C = C = 10µF(Tant.),
ꢁ
ꢁ
O
T = -40 to 125°C, unless otherwise specified)
A
Symbol
Parameter
Test Conditions
O = 10 mA, TJ = 25°C
ꢁO = 10 mA to 5A, Vꢁ = 2.85 to 10V
O = 10 mA, Vꢁ = 2.85 to 10V TJ = 25°C
ꢁO = 10 mA, Vꢁ = 2.85 to 10V
Min.
Typ.
Max.
Unit
ꢁ
1.225
1.213
1.25
1.25
0.015
0.035
1
1.275
1.287
0.2
V
V
VO
Output voltage
ꢁ
mV
mV
mV
V
ΔVO
Line regulation
0.2
ꢁ
O = 10 mA to 5A, TJ = 25°C
O = 10 mA to 5A
0.3
ΔVO
Load regulation
Dropout voltage
ꢁ
0.2
1.3
3
0.4
Vd
ꢁO = 5 A
1.5
V
ꢁO(min) Quiescent current
Vꢁ ≤10V
10
mA
A
ꢁsc
Short circuit current
Thermal regulation
Vꢁ - VO = 5V
TA = 25°C, 30ms pulse
5.5
60
7
0.003 0.015
72
ꢀ/W
f = 120 Hz, CO = 25µF, CADJ = 25µF,
ꢁO = 5A, Vꢁ = 4.75 ± ± 1.5V
SVR Supply voltage rejection
ꢁADJ Adjust pin current
dB
Vꢁ = 4.25V, ꢁO = 10 mA
55
120
5
µA
µA
ΔꢁADJ Adjust pin current change Vꢁ = 2.85 to 10V, ꢁO = 10 mA to 5A
0.2
RMS Output noise voltage
(ꢀ of VO)
eN
TA = 25°C, f = 10Hz to 10KHz
TA = 125°C, 1000Hrs
0.003
ꢀ
S
S
Temperature stability
Long term stability
0.5
0.5
ꢀ
ꢀ
11/22
Typical application
KD1084 series
5
Typical application
Unless otherwise specified T = 25°C, C = C = 10µF (tant.)
J
ꢁ
O
Figure 3.
Dropout voltage vs output current Figure 4.
Dropout voltage vs temperature
Figure 5.
Short circuit current vs dropout
voltage
Figure 6.
Line regulation vs temperature
Figure 7.
Output voltage vs temperature
Figure 8.
Load regulation vs temperature
12/22
KD1084 series
Typical application
Figure 9.
Supply voltage rejection vs
frequency
Figure 10. Adjust pin current vs output
current
Figure 11. Line transient
Figure 12. Load transient
Vꢁ=4 to 6V, ꢁO=200mA,Cꢁ = 1µF(tant), CO=10µF(tant),
ts=tf=5µs
Vꢁ=7 V, ꢁO=0.1 to 5 A, Cꢁ = 1µF(tant), CO=10µF(tant)
ts=tf=3.5µs
13/22
Package mechanical data
KD1084 series
6
Package mechanical data
®
ꢁn order to meet environmental requirements, ST offers these devices in ECOPACK
packages. These packages have a Lead-free second level interconnect. The category of
second Level ꢁnterconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com.
14/22
KD1084 series
Package mechanical data
TO-220 MECHANICAL DAT
A
mm.
inch
DIM.
MIN.
4.40
1.23
2.40
TYP
MAX.
4.60
1.32
2.72
MIN.
TYP.
MAX.
0.181
0.051
0.107
A
C
0.173
0.048
0.094
D
D1
E
1.27
0.050
0.49
0.61
1.14
1.14
4.95
2.4
0.70
0.88
1.70
1.70
5.15
2.7
0.019
0.024
0.044
0.044
0.194
0.094
0.393
0.027
0.034
0.067
0.067
0.203
0.106
0.409
F
F1
F2
G
G1
H2
L2
L4
L5
L6
L7
L9
DꢁA.
10.0
10.40
16.4
0.645
13.0
2.65
15.25
6.2
14.0
2.95
15.75
6.6
0.511
0.104
0.600
0.244
0.137
0.147
0.551
0.116
0.620
0.260
0.154
0.151
3.5
3.93
3.85
3.75
P011C
15/22
Package mechanical data
KD1084 series
DPAK MECHANICAL DATA
mm.
inch
TYP.
DIM.
MIN.
TYP
MAX.
MIN.
MAX.
A
A1
A2
B
2.2
0.9
2.4
1.1
0.23
0.9
5.4
0.6
0.6
6.2
0.086
0.035
0.001
0.025
0.204
0.017
0.019
0.236
0.094
0.043
0.009
0.035
0.212
0.023
0.023
0.244
0.03
0.64
5.2
b4
C
0.45
0.48
6
C2
D
D1
E
5.1
0.200
6.4
6.6
0.252
0.260
E1
e
4.7
0.185
0.090
2.28
e1
H
4.4
9.35
1
4.6
0.173
0.368
0.039
0.181
0.397
10.1
L
(L1)
L2
L4
R
2.8
0.8
0.110
0.031
0.6
0°
1
0.023
0°
0.039
8°
0.2
0.008
V2
8°
0068772-F
16/22
KD1084 series
Package mechanical data
D2PAK MEC
HANICAL DATA
mm.
inch
DIM.
MIN.
TYP
MAX.
MIN.
TYP.
MAX.
A
A1
A2
B
4.4
2.49
0.03
0.7
4.6
2.69
0.23
0.93
1.7
0.173
0.098
0.001
0.027
0.044
0.017
0.048
0.352
0.181
0.106
0.009
0.036
0.067
0.023
0.053
0.368
B2
C
1.14
0.45
1.23
8.95
0.6
C2
D
1.36
9.35
D1
E
8
0.315
0.335
10
10.4
0.393
0.409
E1
G
8.5
4.88
15
5.28
15.85
1.4
0.192
0.590
0.050
0.055
0.094
0.208
0.624
0.055
0.068
0.126
L
L2
L3
M
1.27
1.4
1.75
3.2
2.4
R
0.4
0.016
V2
0˚
8˚
0˚
8˚
011P6G
17/22
Package mechanical data
KD1084 series
Tape & Reel DPAK-PPAK MECHANICAL DATA
mm.
TYP
inch
TYP.
DIM.
MIN.
MAX.
330
MIN.
MAX.
12.992
0.519
A
C
D
12.8
20.2
60
13.0
13.2
0.504
0.795
2.362
0.512
N
T
22.4
7.00
10.60
2.75
4.1
0.882
0.2.76
0.417
0.105
0.161
0.319
Ao
Bo
Ko
Po
P
6.80
10.40
2.55
3.9
6.90
10.50
2.65
4.0
0.268
0.409
0.100
0.153
0.311
0.272
0.413
0.104
0.157
0.315
7.9
8.0
8.1
18/22
KD1084 series
Package mechanical data
Tape & Reel D2PAK-P2PAK-D2PAK/A-P2PAK/A MECHANICAL DATA
mm.
TYP
inch
TYP.
DIM.
MIN.
MAX.
180
MIN.
MAX.
7.086
0.519
A
C
12.8
20.2
60
13.0
13.2
0.504
0.795
2.362
0.512
D
N
T
14.4
10.70
15.90
5.00
4.1
0.567
0.421
0.626
0.197
0.161
0.476
Ao
Bo
Ko
Po
P
10.50
15.70
4.80
3.9
10.6
15.80
4.90
4.0
0.413
0.618
0.189
0.153
0.468
0.417
0.622
0.193
0.157
0.472
11.9
12.0
12.1
19/22
Order codes
KD1084 series
7
Order codes
Table 11. Order codes
Part numbers
DPAK
TO-220
D2PAK
Output voltage
Tolerance
KD1084DT18R
KD1084ADT18R
KD1084DT25R
KD1084ADT25R
KD1084DT33R
KD1084ADT33R
KD1084DT-R
1.8 V
1.8 V
2.5 V
2.5 V
3.3 V
3.3 V
ADJ
2ꢀ
1ꢀ
2ꢀ
1ꢀ
2ꢀ
1ꢀ
2ꢀ
1ꢀ
KD1084AD2T18R
KD1084D2T25R
KD1084AV33
KD1084AD2T-R
KD1084ADT-R
ADJ
20/22
KD1084 series
Revision history
8
Revision history
Table 12. Revision history
Date
Revision
Changes
06-Sep-2005
02-Apr-2007
30-May-2007
4
5
6
Order Codes has been updated.
Order Codes has been updated and the document has been reformatted.
Order Codes has been updated.
21/22
KD1084 series
Please Read Carefully:
ꢁnformation in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. ꢁf any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
ꢁnformation in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - ꢁndia - ꢁsrael - ꢁtaly - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
22/22
相关型号:
©2020 ICPDF网 联系我们和版权申明