LD39115SJ12R [STMICROELECTRONICS]
1.2V FIXED POSITIVE LDO REGULATOR, PBGA4, 0.80 X 0.80 MM, ROHS COMPLIANT, FC-4;
| 型号： | LD39115SJ12R |
| 厂家： | 
ST |
| 描述： | 1.2V FIXED POSITIVE LDO REGULATOR, PBGA4, 0.80 X 0.80 MM, ROHS COMPLIANT, FC-4 输出元件 调节器 |
| 文件： | 总23页 (文件大小：1041K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
LD39115Jxx
LD39115SJxx
150 mA low quiescent current
low noise voltage regulator
Features
■ Input voltage from 1.5 to 5.5 V
■ Ultra low dropout voltage (80 mV typ. at 100
mA load)
■ Very low quiescent current (20 µA typ. at no
load, 35 µA typ. at 150 mA load, 1 µA max in off
mode)
■ Very low noise (33 µV
from 1 kHz to 100
Flip-chip 4
RMS
kHz at V
= 1.8 V)
OUT
■ Output voltage tolerance: 2.0% @ 25 °C
■ 150 mA guaranteed output current
Description
■ Wide range of output voltages available on
request: 0.8 V to 4.5 V with 100 mV step
The LD39115Jxx provides 150 mA maximum
current from an input voltage ranging from 1.5 V
to 5.5 V with a typical dropout voltage of 80 mV. It
is stablized with a ceramic capacitor. The ultra low
drop voltage, low quiescent current and low noise
features make it suitable for low power battery-
powered applications. Power supply rejection is
65 dB at low frequencies and starts to roll off at 10
kHz. An enable logic control function puts the
LD39115Jxx in shutdown mode allowing a total
current consumption lower than 1 µA. The device
also includes a short-circuit constant current
limiting and thermal protection.
■ Logic-controlled electronic shutdown
■ Compatible with ceramic capacitor
C
= 1 µF
OUT
■ Internal current and thermal limit
■ Flip-chip 4 bumps 0.8 x 0.8 mm. pitch
■ Temperature range: -40 °C to 125 °C
Applications
■ Mobile phones
■ Personal digital assistants (PDAs)
■ Cordless phones and similar battery-powered
systems
Table 1.
Device summary
Part numbers
Order codes
Output voltages
LD39115JXX12
LD39115SJXX12
LD39115JXX13
LD39115JXX28
LD39115JXX30
LD39115JXX33
LD39115J12R
LD39115SJ12R
LD39115J13R
LD39115J28R
LD39115J30R
LD39115J33R
1.2 V
1.2 V
1.5 V
2.8 V
3.0 V
3.3 V
August 2009
Doc ID 15527 Rev 3
1/23
www.st.com
23
Contents
LD39115Jxx, LD39115SJxx
Contents
1
2
3
4
5
6
7
8
Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Typical application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Typical performance characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Different output voltage versions of the LD39115Jxx,
LD39115SJxx available on request . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
9
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
2/23
Doc ID 15527 Rev 3
LD39115Jxx, LD39115SJxx
Diagram
1
Diagram
Figure 1.
Block diagram
OUT
IN
BandGap
1.22 V
R1
R2
Trimming
Thermal
Protection
Enable
EN
GND
Doc ID 15527 Rev 3
3/23
Pin configuration
LD39115Jxx, LD39115SJxx
2
Pin configuration
Figure 2.
Pin connection (top view)
Table 2.
Pin description
Symbol
Pin n°
Function
A2
A1
B2
B1
EN
GND
IN
Enable pin logic input: Low = shutdown, High = active
Common ground
Input voltage of the LDO
OUT
Output voltage
4/23
Doc ID 15527 Rev 3
LD39115Jxx, LD39115SJxx
Typical application
3
Typical application
Figure 3.
Typical application circuit
VOUT
Load
VIN
IN
OUT
1 µF
1 µF
EN
GND
VEN
Doc ID 15527 Rev 3
5/23
Maximum ratings
LD39115Jxx, LD39115SJxx
4
Maximum ratings
Table 3.
Absolute maximum ratings
Parameter
Symbol
Value
Unit
VIN
VOUT
VEN
IOUT
PD
DC input voltage
- 0.3 to 6
V
V
DC output voltage
- 0.3 to VI + 0.3
- 0.3 to VI + 0.3
Internally limited
Internally limited
- 65 to 150
Enable input voltage
Output current
V
mA
mW
°C
°C
Power dissipation
TSTG
TOP
Storage temperature range
Operating junction temperature range
- 40 to 125
Note:
Absolute maximum ratings are those values beyond which damage to the device may occur.
Functional operation under these conditions is not implied. All values are referred to GND.
Table 4.
Symbol
RthJA
Thermal data
Parameter
Value
Unit
Thermal resistance junction-ambient
180
°C/W
6/23
Doc ID 15527 Rev 3
LD39115Jxx, LD39115SJxx
Electrical characteristics
5
Electrical characteristics
T = 25 °C, V = V
+ 1 V, C = C
= 1 µF, I
= 1 mA, V = V , unless
J
IN
OUT(NOM)
IN
OUT
OUT
EN
IN
otherwise specified.
(1)
Table 5.
Symbol
Electrical characteristics for LD39115Jxx
Parameter
Test conditions
Min.
Typ.
Max.
Unit
VIN
Operating input voltage
Turn-on threshold
1.5
5.5
V
V
1.45
1.35
1.48
VUVLO
Turn-off threshold
1.30
-2.0
mV
%
VOUT>1.5V, IOUT=1mA, TJ=25°C
2.0
3.0
VOUT>1.5V, IOUT=1mA,
-40°C<TJ<125°C
-3.0
%
VOUT
VOUT accuracy
VOUT ≤ 1.5V, IOUT=1mA
10
30
mV
VOUT ≤ 1.5V, IOUT=1mA,
-40°C<TJ<125°C
mV
ΔVOUT
ΔVOUT
ΔVOUT
ΔVOUT
Static line regulation
VOUT +1V ≤ VIN ≤ 5.5V, IOUT=1mA
0.01
10
%/V
Transient line regulation ΔVIN=+500mV, IOUT=1mA,
mVpp
%/mA
mVpp
(2)
TR=TF=5µs
Static load regulation
IOUT=1mA to 150mA
0.002
40
Transient load
regulation (2)
IOUT=1mA to 150mA, tR=tF=5µs
IOUT=100mA, VOUT>1.5V
-40°C<TJ<125°C
VDROP
eN
Dropout voltage (3)
80
30
110
mV
Output noise voltage
10Hz to 100kHz, IOUT=10mA
µVRMS/V
VIN=VOUTNOM+1V+/-VRIPPLE
VRIPPLE=0.1V Freq.=1kHz
IOUT = 10mA
74
Supply voltage rejection
VOUT = 1.5V
SVR
dB
µA
VIN=VOUTNOM+0.5V+/-VRIPPLE
VRIPPLE=0.1V Freq.=10kHz
IOUT=10mA
67
20
I
OUT=0mA
IOUT=0mA, -40°C<TJ<125°C
OUT=0 to 150mA
50
I
35
IQ
Quiescent current
IOUT=0 to 150mA, -40°C<TJ<125°C
70
1
VIN input current in OFF MODE:
VEN=GND
0.001
ISC
Short circuit current
RL=0
200
0.9
mA
V
Enable input logic low
VIN=1.5V to5.5V, -40°C<TJ<125°C
0.4
VEN
Enable input logic high VIN=1.5V to 5.5V, -40°C<TJ<125°C
Enable pin input current VSHDN=VIN
Turn on time (4)
IEN
0.1
30
100
nA
µs
TON
Doc ID 15527 Rev 3
7/23
Electrical characteristics
LD39115Jxx, LD39115SJxx
(1)
Table 5.
Symbol
Electrical characteristics for LD39115Jxx (continued)
Parameter
Test conditions
Min.
Typ.
Max.
Unit
Thermal shutdown
Hysteresis
160
20
TSHDN
°C
Capacitance (see Section 6: Typical
performance characteristics)
COUT
Output capacitor
1
22
µF
1. For VOUT(NOM) < 1.2 V, VIN = 1.5 V.
2. All transient values are guaranteed by design, not production tested.
3. Dropout voltage is the input-to-output voltage difference at which the output voltage is 100 mV below its nominal value. This
specification does not apply for output voltages below 1.5 V.
4. Turn-on time is time measured between the enable input just exceeding VEN high value and the output voltage just
reaching 95 % of its nominal value.
8/23
Doc ID 15527 Rev 3
LD39115Jxx, LD39115SJxx
T = 25 °C, V = V
Electrical characteristics
+ 1 V, C = C
= 1 µF, I
= 1 mA, V = V , unless
J
IN
OUT(NOM)
IN
OUT
OUT EN IN
otherwise specified.
(1)
Table 6.
Symbol
Electrical characteristics for LD39115SJxx
Parameter
Test conditions
Min.
Typ.
Max.
Unit
VIN
Operating input voltage
Turn-on threshold
1.5
5.5
V
V
1.45
1.35
1.48
VUVLO
Turn-off threshold
1.30
-2.0
mV
%
VOUT >1.5V, IOUT=1mA, TJ=25°C
2.0
3.0
VOUT >1.5V, IOUT=1mA,
-40°C<TJ<125°C
-3.0
%
VOUT
VOUT accuracy
VOUT ≤ 1.5V, IOUT=1mA
10
30
mV
VOUT ≤ 1.5V, IOUT=1mA,
-40°C<TJ<125°C
mV
ΔVOUT
ΔVOUT
ΔVOUT
ΔVOUT
Static line regulation
VOUT +1V ≤ VIN ≤ 5.5V, IOUT=1mA
0.01
10
%/V
Transient line regulation
ΔVIN=+500mV, IOUT=1mA, TR=TF=5µs
IOUT = 1mA to 150mA
mVpp
%/mA
mVpp
(2)
Static load regulation
0.002
40
Transient load
regulation (2)
IOUT = 1mA to 150mA, TR=TF=5µs
IOUT = 100mA, VOUT>1.5V
-40°C<TJ<125°C
VDROP
eN
Dropout voltage (3)
80
30
110
mV
µVRMS
/V
Output noise voltage
10Hz to 100kHz, IOUT=10mA
VIN = VOUTNOM+1V+/-VRIPPLE
VRIPPLE = 0.1V Freq.=1kHz
IOUT=10mA
74
Supply voltage rejection
VOUT = 1.5V
SVR
dB
µA
VIN = VOUTNOM+0.5V+/-VRIPPLE
VRIPPLE=0.1V Freq.=10kHz
IOUT=10mA
67
20
IOUT=0mA
I
OUT=0mA, -40°C<TJ<125°C
IOUT=0 to 150mA
OUT=0 to 150mA, -40°C<TJ<125°C
50
35
IQ
Quiescent current
I
70
1
VIN input current in OFF MODE:
VEN=GND
0.001
ISC
Short circuit current
RL=0
200
0.9
mA
V
Enable input logic low
VIN=1.5V to 5.5V, -40°C<TJ<125°C
0.4
VEN
Enable input logic high VIN = 1.5V to 5.5V, -40°C<TJ<125°C
Enable pin input current VSHDN=VIN
Turn on time (4)
IEN
0.1
100
nA
µs
TON
100
Doc ID 15527 Rev 3
9/23
Electrical characteristics
LD39115Jxx, LD39115SJxx
(1)
Table 6.
Symbol
Electrical characteristics for LD39115SJxx (continued)
Parameter
Test conditions
Min.
Typ.
Max.
Unit
Thermal shutdown
Hysteresis
160
20
TSHDN
°C
Capacitance (see Section 6: Typical
performance characteristics)
COUT
Output capacitor
1
22
µF
1. For VOUT(NOM) < 1.2 V, VIN = 1.5 V.
2. All transient values are guaranteed by design, not production tested.
3. Dropout voltage is the input-to-output voltage difference at which the output voltage is 100 mV below its nominal value. This
specification does not apply for output voltages below 1.5 V.
4. Turn-on time is time measured between the enable input just exceeding VEN high value and the output voltage just
reaching 95 % of its nominal value.
10/23
Doc ID 15527 Rev 3
LD39115Jxx, LD39115SJxx
Typical performance characteristics
6
Typical performance characteristics
(C = C
= 1 µF, V to V )
EN IN
IN
OUT
Figure 4.
Output voltage vs. temperature
Figure 5.
Output voltage vs. temperature
3
2.95
2.9
1.3
1.28
1.26
1.24
1.22
1.2
VIN = 2.2 V, IOUT = 1 mA
VIN = 3.8 V, IOUT = 1 mA
2.85
2.8
1.18
1.16
1.14
1.12
1.1
2.75
2.7
VOUT = 2.8 V
V
OUT = 1.2 V
2.65
2.6
-75 -50 -25
0
25 50 75 100 125 150 175
T [°C]
-75 -50 -25
0
25
50 75 100 125 150 175
T [°C]
Figure 6.
Line regulation vs. temperature
Figure 7.
Load regulation vs. temperature
0.004
0.0035
0.003
0.0025
0.002
0.0015
0.001
0.0005
0
0.05
0.04
0.03
0.02
0.01
0
VIN = 2.2 V, IOUT = from 1 to 150 mA
VIN = from 2.2 V to 5.5 V, IOUT = 1 mA
VOUT=1.2V
VOUT=1.2 V
-75 -50 -25
0
25 50 75 100 125 150 175
T [°C]
-75 -50 -25
0
25
50 75 100 125 150 175
T [°C]
Figure 8.
Short-circuit current vs. drop
voltage
Figure 9.
Dropout voltage vs. temperature
0.09
0.08
0.07
0.06
0.05
0.04
0.03
0.02
0.01
0
I
OUT = 0.1 A
0.45
0.4
125
85
55
25
0
0.35
0.3
0.25
0.2
-25
-40
0.15
0.1
C
IN = 1 µF COUT = 1 µF(+ 10 µF electrolitycs)
VOUT = 2.8 V
0.05
0
0
1
2
3
4
5
6
-75 -50 -25
0
25 50 75 100 125 150 175
TEMPERATURE [°C]
DROP [V]
Doc ID 15527 Rev 3
11/23
Typical performance characteristics
LD39115Jxx, LD39115SJxx
Figure 10. Dropout voltage vs. output current Figure 11. Output voltage vs. input voltage
0.14
1.4
125
85
55
25
0
0.12
1.2
IOUT = 0.15 A
0.1
1
0.08
0.8
0.06
0.04
0.02
0
0.6
0.4
0.2
0
-25
-40
VOUT = 1.3 V
VOUT = 2.8 V
0
1
2
3
4
5
6
0
0.05
0.1
0.15
IOUT [A]
0.2
0.25
VIN [V]
Figure 12. Output voltage vs. input voltage
Figure 13. Output voltage vs. input voltage
1.4
3
125
85
55
25
0
125
85
55
25
0
IOUT = 0.15 A
1.2
2.5
2
IOUT = 0.15 A
1
0.8
0.6
0.4
1.5
1
-25
-40
-25
-40
VOUT = 2.8 V
0.5
0
0.2
VOUT = 1.3 V
0
0
1
2
3
4
5
6
0
1
2
3
4
5
6
VIN [V]
V
IN [V]
Figure 14. Enable threshold vs. temperature
Figure 15. Quiescent current vs. temperature
45
1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
VIN = 2.2 V, No Load
40
35
30
25
20
15
10
5
0.2
VIN = 2.2 V, IOUT = 1 mA
0.1
0
VOUT = 1.2 V
0
-75 -50 -25
0
25 50 75 100 125 150 175
TEMPERATURE [°C]
-75 -50 -25
0
25 50 75 100 125 150 175
TEMPERATURE [°C]
12/23
Doc ID 15527 Rev 3
LD39115Jxx, LD39115SJxx
Typical performance characteristics
Figure 16. Quiescent current vs. temperature Figure 17. Quiescent current vs. temperature
70
60
50
40
30
20
10
0
70
60
50
40
30
20
10
0
V
IN = 3.8 V, IOUT = 0.15 A
VIN = 2.2 V, IOUT = 0.15 A
VOUT = 2.8 V
VOUT = 1.2 V
-75 -50 -25
0
25 50 75 100 125 150 175
TEMPERATURE [°C]
-75 -50 -25
0
25 50 75 100 125 150 175
TEMPERATURE [°C]
Figure 18. Quiescent current vs. input voltage Figure 19. Quiescent current vs. output
current
25
22.5
20
50
45
40
35
30
25
20
15
10
5
I
OUT = 1 mA
VIN = 2.3 V
17.5
15
12.5
10
7.5
5
VOUT = 1.3 V
VOUT = 2.8 V
2.5
0
0
0
0.025 0.05 0.075 0.1 0.125 0.15 0.175 0.2 0.225
IOUT [A]
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5 6
V
IN [V]
Figure 20. Supply voltage rejection vs.
temperature
Figure 21. Supply voltage rejection vs.
temperature
100
100
VIN from 2.2 V to 2.4 V, IOUT = 10 mA, Freq. = 1 kHz
VIN from 2.1 V to 2.3 V IOUT = 10 mA, Freq. = 1 kHz
90
80
70
60
90
80
70
60
VOUT = 1.2 V
V
OUT = 1.3 V
50
40
50
40
-75 -50 -25
0
25 50 75 100 125 150 175
T [°C]
-75 -50 -25
0
25 50 75 100 125 150 175
T [°C]
Doc ID 15527 Rev 3
13/23
Typical performance characteristics
LD39115Jxx, LD39115SJxx
Figure 22. Supply voltage rejection vs.
temperature
Figure 23. Supply voltage rejection vs.
temperature
100
100
90
80
70
60
50
40
VIN from 3.7 V to 3.9 V, IOUT = 10 mA, Freq. = 1 kHz
VIN from 1.7 V to 1.9 V, IOUT = 10 mA, Freq. = 10 kHz
90
80
70
60
50
VOUT = 2.8 V
VOUT = 1.3 V
40
-75 -50 -25
0
25 50 75 100 125 150 175
T [°C]
-75 -50 -25
0
25 50 75 100 125 150 175
T [°C]
Figure 24. Supply voltage rejection vs.
temperature
Figure 25. Supply voltage rejection vs.
frequency
100
100
VIN from 2.1 V to 2.3 V, IOUT = 10 mA
VIN from 3.2 V to 3.4 V, IOUT = 10 mA, Freq. = 10 kHz
90
80
70
60
50
40
90
80
70
60
30
VOUT = 1.2 V
V
OUT = 2.8 V
20
10
0
50
40
-75 -50 -25
0
25 50 75 100 125 150 175
T [°C]
0
10 20 30 40 50 60 70 80 90 100 110
Frequency [kHz]
Figure 26. Supply voltage rejection vs.
frequency
Figure 27. Supply voltage rejection vs.
frequency
100
100
VIN from 1.7 V to 1.9 V, IOUT = 10 mA
VIN from 3.2 V to 3.4 V, IOUT = 10 mA
90
80
70
60
50
40
90
80
70
60
50
40
30
30
VOUT = 1.3 V
VOUT = 2.8 V
20
10
0
20
10
0
0
10 20 30 40 50 60 70 80 90 100 110
Frequency [KHz]
0
10 20 30 40 50 60 70 80 90 100 110 120
Frequency [kHz]
14/23
Doc ID 15527 Rev 3
LD39115Jxx, LD39115SJxx
Typical performance characteristics
Figure 28. Supply voltage rejection vs. output Figure 29. LD39115J noise
current
100
1
0.8
0.6
0.4
0.2
0
VIN from 1.7 V to 1.9 V, F = 10 kHz
90
80
70
60
50
40
30
20
10
0
VOUT = 1.3 V, VIN = 2.3 V, TA = 25 °C
VOUT = 1.3 V
0
20000
40000
60000
80000
100000
0
0.025 0.05 0.075 0.1 0.125 0.15 0.175 0.2 0.225 0.25
IOUT [A]
Freq [Hz]
Figure 30. Line regulation transient
Figure 31. Start up transient
VIN
VIN
VOUT
VOUT
VIN from 2.2 V to 2.7 V, IOUT = 1 mA, COUT = 1 µF, No CIN
tRISE/FALL = 5 µs
VIN from 0 to 2.3 V, IOUT = 1 mA COUT = 1 µF No CIN
tRISE = 60 µs
,
Figure 32. Enable transient
Figure 33. Enable transient
VEN
VEN
VOUT = 1.2 V
VOUT
VOUT = 2.8 V
VOUT
VIN = 2.3 V, VEN from 0 to 2 V, IOUT = 1 mA, tRISE = 6 µs
VIN = 2.3 V, VEN from 0 to 2 V, IOUT = 1 mA
Doc ID 15527 Rev 3
15/23
Typical performance characteristics
Figure 34. Load transient
LD39115Jxx, LD39115SJxx
Figure 35. Load transient
IOUT
IOUT
VOUT = 1.2 V
VOUT = 2.8 V
VOUT
VOUT
VIN = 2. 2 V, IOUT = from 1 to 150 mA, tRISE/FALL = 5 µs
Vin = 3.8 V, IOUT = from 1 to 150 mA, tRISE/FALL = 5 µs
Figure 36. ESR required for stability with
ceramics capacitors
2.5
2.25
UNSTABLE ZONE
2
1.75
1.5
IOUT = from 1 mA to 150 mA, CIN = 1µF (ceramic)
1.25
1
0.75
STABLE ZONE
0.5
0.25
0
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22
COUT [µF] (nominal value)
16/23
Doc ID 15527 Rev 3
LD39115Jxx, LD39115SJxx
Package mechanical data
7
Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
®
®
ECOPACK packages, depending on their level of environmental compliance. ECOPACK
specifications, grade definitions and product status are available at: www.st.com.
®
ECOPACK is an ST trademark.
Doc ID 15527 Rev 3
17/23
Package mechanical data
LD39115Jxx, LD39115SJxx
Flip-chip 4 mechanical data
mm.
Dim.
Min.
0.52
0.17
0.35
0.23
0.758
Typ.
0.56
0.20
0.36
0.25
0.788
0.4
Max.
0.60
0.23
0.37
0.29
0.818
A
A1
A2
b
D
D1
E
0.758
0.788
0.4
0.818
E1
SD
SE
f
0.18
0.18
0.2
0.22
0.22
0.2
0.199
0.075
ccc
7504896/M
18/23
Doc ID 15527 Rev 3
LD39115Jxx, LD39115SJxx
Package mechanical data
Tape and reel Flip-chip 4 mechanical data
mm.
Typ.
inch.
Typ.
Dim.
Min.
Max.
178
Min.
Max.
6.926
0.519
A
C
D
12.8
20.2
59
13.2
0.504
0.795
2.323
N
60
61
8.4
2.362
2.401
0.331
0.036
0.036
0.029
0.161
0.161
T
Ao
Bo
Ko
Po
P
0.82
0.82
0.64
3.9
0.87
0.87
0.69
4
0.92
0.92
0.74
4.1
0.032
0.032
0.025
0.153
0.153
0.034
0.034
0.027
0.157
0.157
3.9
4
4.1
Doc ID 15527 Rev 3
19/23
Package mechanical data
Figure 37. Foot print data
LD39115Jxx, LD39115SJxx
20/23
Doc ID 15527 Rev 3
LD39115Jxx, LD39115SJxx
Different output voltage versions of the LD39115Jxx, LD39115SJxx
8
Different output voltage versions of the LD39115Jxx,
LD39115SJxx available on request
Table 7.
Options available on request
Order codes
Output voltages
LD39115J08R
LD39115J10R
LD39115J15R
LD39115J18R
0.8 V
1.0 V
1.5 V
1.8 V
Doc ID 15527 Rev 3
21/23
Revision history
LD39115Jxx, LD39115SJxx
9
Revision history
Table 8.
Document revision history
Revision
Date
Changes
26-Mar-2009
12-Jun-2009
05-Aug-2009
1
2
3
Initial release.
Modified: Table 1 on page 1 and Table 7 on page 21.
Modified: tape and reel mechanical data on page 19.
22/23
Doc ID 15527 Rev 3
LD39115Jxx, LD39115SJxx
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2009 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Doc ID 15527 Rev 3
23/23
相关型号：
©2020 ICPDF网 联系我们和版权申明