LM2931BZ50R
更新时间:2024-09-18 06:59:47
描述:Very low drop voltage regulators with inhibit function
LM2931BZ50R 概述
Very low drop voltage regulators with inhibit function 非常低压降稳压器与抑制功能 线性稳压器IC
LM2931BZ50R 规格参数
是否无铅: | 不含铅 | 是否Rohs认证: | 符合 |
生命周期: | Obsolete | 零件包装代码: | TO-92 |
包装说明: | LEAD FREE, TO-92, 3 PIN | 针数: | 3 |
Reach Compliance Code: | not_compliant | ECCN代码: | EAR99 |
HTS代码: | 8542.39.00.01 | 风险等级: | 5.64 |
Is Samacsys: | N | 可调性: | FIXED |
最大回动电压 1: | 0.6 V | 标称回动电压 1: | 0.25 V |
最大绝对输入电压: | 40 V | 最大输入电压: | 26 V |
最小输入电压: | 6 V | JESD-30 代码: | O-PBCY-W3 |
JESD-609代码: | e3 | 最大电网调整率: | 0.03% |
最大负载调整率: | 0.05% | 功能数量: | 1 |
输出次数: | 1 | 端子数量: | 3 |
工作温度TJ-Max: | 125 °C | 工作温度TJ-Min: | -40 °C |
最大输出电流 1: | 0.1 A | 最大输出电压 1: | 5.5 V |
最小输出电压 1: | 4.5 V | 标称输出电压 1: | 5 V |
封装主体材料: | PLASTIC/EPOXY | 封装代码: | TO-92 |
封装等效代码: | SIP3,.1,50 | 封装形状: | ROUND |
封装形式: | CYLINDRICAL | 包装方法: | TAPE AND REEL |
峰值回流温度(摄氏度): | NOT SPECIFIED | 认证状态: | Not Qualified |
调节器类型: | FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR | 子类别: | Other Regulators |
表面贴装: | NO | 技术: | BIPOLAR |
端子面层: | Tin (Sn) | 端子形式: | WIRE |
端子节距: | 1.27 mm | 端子位置: | BOTTOM |
处于峰值回流温度下的最长时间: | NOT SPECIFIED | 最大电压容差: | 10% |
Base Number Matches: | 1 |
LM2931BZ50R 数据手册
通过下载LM2931BZ50R数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载LM2931XX - LM2931AXX33
LM2931AXX50 - LM2931BXX50
Very low drop voltage regulators with inhibit function
Features
■ Very low dropout voltage (0.15 V typ. at 10 mA
load)
■ Low quiescent current (typ. 2.5 mA, at 100 mA
load)
■ Output current up to 100 mA
DPAK
TO-92
■ Adjustable (from V
= 2.5 V only SO-8) and
OUT
fixed (3.3 V & 5 V) output voltage version
■ Internal current and thermal limit
■ Load dump protection up to 60 V
■ Reverse transient protection up to -50 V
■ Temperature range: -40 to 125 °C
SO-8
■ Package available: TO-92, DPAK, SO-8 (with
inhibit control)
board in stand-by decreasing the total power
consumption. Ideal for automotive application the
LM2931xx is protected from reverse battery
installations or 2 battery jumps. During the
transient, such as a a load dump (60 V) when the
input voltage can exceed the specified maximum
operating input voltage (26 V), the regulator will
automatically shut down to protect both internal
circuit and the load.
Description
The LM2931xx are very low drop regulators. The
very low drop voltage and the low quiescent
current make them particular suitable for low
noise, low power applications and in battery
powered systems. In the 8 pin configuration (SO-
8), fully compatible to the older L78Lxx family, a
shut down logic control function is available.
This means that when the device is used as a
local regulator is possible to put a part of the
Table 1.
Device summary
Order codes
Packages
Output voltage
DPAK
TO-92 (BAG)
TO-92 (Ammopak) (1)
SO-8
LM2931AZ33R
LM2931AZ50R
LM2931BZ50R
LM2931AD33R
LM2931AD50R
LM2931BD50R
LM2931D-R
3.3 V
5.0 V
LM2931ADT50R
LM2931BZ50AP
5.0 V
2.5 to 26 V
1. Please note that in these cases pins are shaped according to tape & reel specifications.
July 2008
Rev 18
1/23
www.st.com
23
Contents
LM2931XX - LM2931AXX33 - LM2931AXX50 - LM2931BXX50
Contents
1
2
3
4
5
6
7
8
9
Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Truth tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Application circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Timing diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Order code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2/23
LM2931XX - LM2931AXX33 - LM2931AXX50 - LM2931BXX50
Diagram
1
Diagram
Figure 1.
Schematic diagram
3/23
Pin configuration
LM2931XX - LM2931AXX33 - LM2931AXX50 - LM2931BXX50
2
Pin configuration
Figure 2.
Pin connections (top view)
DPAK
SO-8
PIN 1 = VOUT
PIN 2 = GND
PIN 3 = VIN
BOTTOM VIEW
TO-92
4/23
LM2931XX - LM2931AXX33 - LM2931AXX50 - LM2931BXX50
Maximum ratings
3
Maximum ratings
Table 2.
Absolute maximum ratings
Symbol
Parameter
Value
Unit
VI
VI
VI
VI
DC positive input voltage
40
-15
60
V
V
V
V
V
DC reverse input voltage
Transient input voltage (τ < 100 ms)
Transient reverse input voltage (τ < 100 ms)
Inhibit input voltage
-50
40
VINH
IO
Output current
Internally limited
-65 to 150
TSTG
TOP
Storage temperature range
Operating junction temperature range
°C
°C
-40 to 125
Note:
Absolute maximum ratings are those values beyond which damage to the device may occur.
Functional operation under these condition is not implied
Table 3.
Symbol
Thermal data
Parameter
SO-8
DPAK
TO-92
Unit
RthJC
RthJA
Thermal resistance junction-case
Thermal resistance junction-ambient
20
8
°C/W
°C/W
55 (1)
100
200
1. Considering 6 cm2 of copper board heat-sink.
5/23
Application circuits
LM2931XX - LM2931AXX33 - LM2931AXX50 - LM2931BXX50
4
Application circuits
Figure 3.
Application circuit for fixed output
Figure 4.
Application circuit for adjustable output
R suggested value = 27 kΩ
1
V = V
(R + R )/R
1 2 1
O
REF
6/23
LM2931XX - LM2931AXX33 - LM2931AXX50 - LM2931BXX50
Electrical characteristics
5
Electrical characteristics
Table 4.
Electrical characteristics of LM2931Axx33 (refer to the application circuit Figure 3,
T = 25 °C, C = 0.1 µF, C = 100 µF, V = 14 V, I = 10 mA, V
= 0 V, unless otherwise
J
I
O
I
O
INH
specified).
Symbol
Parameter
Test conditions
IO = 10 mA, TJ = -40 to 125°C
Min.
Typ.
Max.
Unit
Maximum operating input
voltage
VI
26
37
3.3
3.3
V
V
V
VO
VO
Output voltage
Output voltage
3.135
3.135
3.425
3.465
IO = 100 mA, VI = 6 to 26 V
TJ = -40 to 125°C
VI = 9 to 16 V
VI = 6 to 26 V
IO = 5 to 100 mA
IO = 10 mA
2
4
10
33
ΔVO
ΔVO
Vd
Line regulation
mV
mV
mV
Load regulation
10
90
250
33
250
600
Dropout voltage (1) (2)
IO = 100 mA
Quiescent current
ON MODE
I
O = 100 mA
2.5
30
1
mA
Id
OFF MODE
VINH = 2.5 V, RLOAD = 330 Ω
0.3
mA
mA
ISC
Short circuit current
100
55
300
IO = 100 mA, VI = 14 2 V
f = 120 Hz, TJ = -40 to 125°C
SVR Supply voltage rejection
78
dB
VIL
VIH
IINH
VI
Control input voltage low
TJ = -40 to 125°C
2
2
1.2
50
V
V
Control input voltage high TJ = -40 to 125°C
3.25
Inhibit input current
VINH = 2.5 V
22
70
µA
V
Transient input voltage
RLOAD = 330 Ω, τ < 100ms
60
Reverse polarity input
voltage
VI
VO = 0.3 V, RLOAD = 330 Ω
-15
-50
V
Reverse polarity input
voltage transient
VI
RLOAD = 330 Ω, τ < 100ms
-50
V
eN
Output noise voltage
B =10 Hz to 100 kHz
330
µVRMS
1. Reference voltage is measured from VOUT to ADJ pin.
2. Vd measured when the output voltage has dropped 100 mV from the nominal value obtained at 14 V.
7/23
Electrical characteristics
LM2931XX - LM2931AXX33 - LM2931AXX50 - LM2931BXX50
Table 5.
Electrical characteristics of LM2931Axx50 (refer to the application circuit Figure 3,
T = 25 °C, C = 0.1 µF, C = 100 µF, V = 14 V, I = 10 mA, V
= 0 V, unless otherwise
J
I
O
I
O
INH
specified).
Symbol
Parameter
Test conditions
Min.
Typ.
Max.
Unit
Maximum operating input
voltage
VI
IO = 10 mA, TJ = -40 to 125°C
26
37
5
V
V
V
VO
VO
Output voltage
Output voltage
4.81
4.75
5.19
5.25
IO = 100 mA, VI = 6 to 26 V
TJ = -40 to 125°C
5
VI = 9 to 16 V
VI = 6 to 26 V
IO = 5 to 100 mA
IO = 10 mA
2
4
10
30
ΔVO
ΔVO
Vd
Line regulation
mV
mV
mV
Load regulation
15
90
250
50
200
600
Dropout voltage (1) (2)
IO = 100 mA
Quiescent current
ON MODE
I
O = 100 mA
2.5
30
1
mA
Id
OFF MODE
VINH = 2.5 V, RLOAD = 500 Ω
0.3
mA
mA
ISC
Short circuit current
100
55
300
IO = 100 mA, VI = 14 2 V
f = 120 Hz, TJ = -40 to 125°C
SVR Supply voltage rejection
75
dB
VIL
VIH
IINH
VI
Control input voltage low
TJ = -40 to 125°C
2
2
1.2
50
V
V
Control input voltage high TJ = -40 to 125°C
3.25
Inhibit input current
VINH = 2.5 V
22
70
µA
V
Transient input voltage
RLOAD = 500 Ω, τ < 100ms
60
Reverse polarity input
voltage
VI
VO = 0.3 V, RLOAD = 500 Ω
-15
-50
V
Reverse polarity input
voltage transient
VI
RLOAD = 500 Ω, τ < 100ms
-50
V
eN
Output noise voltage
B =10 Hz to 100 kHz
500
µVRMS
1. Reference voltage is measured from VOUT to ADJ pin.
2. Vd measured when the output voltage has dropped 100 mV from the nominal value obtained at 14 V.
8/23
LM2931XX - LM2931AXX33 - LM2931AXX50 - LM2931BXX50
Electrical characteristics
Table 6.
Electrical characteristics of LM2931Bxx50 (refer to the application circuit Figure 3,
T = 25 °C, C = 0.1 µF, C = 100 µF, V = 14 V, I = 10 mA, V
= 0 V, unless otherwise
J
I
O
I
O
INH
specified).
Symbol
Parameter
Test conditions
Min.
Typ.
Max.
Unit
Maximum operating input
voltage
VI
IO = 10 mA, TJ = -40 to 125°C
26
4.75
4.5
37
5
V
V
V
VO
VO
Output voltage
Output voltage
5.25
5.5
IO = 100 mA, VI = 6 to 26 V
TJ = -40 to 125°C
5
VI = 9 to 16 V
VI = 6 to 26 V
IO = 5 to 100 mA
IO = 10 mA
2
4
10
30
ΔVO
ΔVO
Vd
Line regulation
mV
mV
mV
Load regulation
15
90
250
50
200
600
Dropout voltage (1) (2)
IO = 100 mA
Quiescent current
ON MODE
I
O = 100 mA
2.5
30
1
mA
Id
OFF MODE
VINH = 2.5 V, RLOAD = 500 Ω
0.3
mA
mA
ISC
Short circuit current
100
55
300
IO = 100 mA, VI = 14 2 V
f = 120 Hz, TJ = -40 to 125°C
SVR Supply voltage rejection
75
dB
VIL
VIH
IINH
VI
Control input voltage low
TJ = -40 to 125°C
2
2
1.2
50
V
V
Control input voltage high TJ = -40 to 125°C
3.25
Inhibit input current
VINH = 2.5 V
22
70
µA
V
Transient input voltage
RLOAD = 500 Ω, τ < 100ms
60
Reverse polarity input
voltage
VI
VO = 0.3 V, RLOAD = 500 Ω
-15
-50
V
Reverse polarity input
voltage transient
VI
RLOAD = 500 Ω, τ < 100ms
-50
V
eN
Output noise voltage
B =10 Hz to 100 kHz
500
µVRMS
1. Reference voltage is measured from VOUT to ADJ pin.
2. Vd measured when the output voltage has dropped 100 mV from the nominal value obtained at 14 V.
9/23
Electrical characteristics
LM2931XX - LM2931AXX33 - LM2931AXX50 - LM2931BXX50
Table 7.
Electrical characteristics of LM2931xx (refer to the application circuit Figure 4 with
R = 27 KΩ and R = 40.5 kΩ, T = 25 °C, C = 0.1 µF, C = 100 µF, V = 14 V, I = 10 mA,
1
2
J
I
O
I
O
V
= 0 V, unless otherwise specified).
INH
Symbol
Parameter
Test conditions
Min.
Typ.
Max.
Unit
Maximum operating input
voltage
VI
IO = 10 mA, TJ = -40 to 125°C
26
37
V
VREF Reference voltage (1)
VREF Reference voltage (1)
1.14
1.08
1.2
1.2
0.6
9
1.26
1.32
4.5
V
V
IO = 100 mA, TJ = -40 to 125°C
VI = 3.6 to 26 V
ΔVO
ΔVO
Line regulation
Load regulation
mV
mV
IO = 5 to 100 mA
IO = 10 mA
30
90
200
600
Vd
Dropout voltage (1) (2)
mV
mA
IO = 100 mA
250
Quiescent current
ON MODE
IO = 100 mA
2.5
30
1
Id
OFF MODE
VINH = 2.5 V, RLOAD = 300 Ω
0.3
mA
mA
ISC
Short circuit current
100
55
300
IO = 100 mA, VI = 14 2 V
f = 120 Hz, TJ = -40 to 125°C
SVR Supply voltage rejection
80
dB
VIL
VIH
IINH
VI
Control input voltage low
TJ = -40 to 125°C
2
2
1.2
50
V
V
Control input voltage high TJ = -40 to 125°C
3.25
Inhibit input current
VINH = 2.5 V
22
70
µA
V
Transient input voltage
RLOAD = 300 Ω, τ < 100ms
60
Reverse polarity input
voltage
VI
VO = 0.3 V, RLOAD = 300 Ω
-15
-50
V
Reverse polarity input
voltage transient
VI
RLOAD = 300 Ω, τ < 100ms
-50
V
eN
Output noise voltage
B = 10 Hz to 100 kHz
330
µVRMS
1. Reference voltage is measured from VOUT to ADJ pin.
2. Vd measured when the output voltage has dropped 100 mV from the nominal value obtained at 14 V.
10/23
LM2931XX - LM2931AXX33 - LM2931AXX50 - LM2931BXX50
Typical characteristics
6
Typical characteristics
(unless otherwise specified C = 0.1 µF, C = 100 µF)
I
O
Figure 5.
Output voltage vs temperature
Figure 6.
Output voltage vs temperature
Figure 7.
Reference voltage vs temperature Figure 8.
Line regulation vs temperature
Figure 9.
Load regulation vs temperature
Figure 10. Dropout voltage vs temperature
11/23
Typical characteristics
LM2931XX - LM2931AXX33 - LM2931AXX50 - LM2931BXX50
Figure 11. Dropout voltage vs temperature
Figure 12. Dropout voltage vs output current
Figure 13. Output voltage vs input voltage
Figure 14. Short circuit current vs drop
voltage
Figure 15. Quiescent current vs temperature Figure 16. Quiescent current vs input voltage
12/23
LM2931XX - LM2931AXX33 - LM2931AXX50 - LM2931BXX50
Typical characteristics
Figure 17. Quiescent current vs output current Figure 18. Supply voltage rejection vs
temperature
Figure 19. Supply voltage rejection vs
frequency
Figure 20. Supply voltage rejection vs output
current
Figure 21. Stability vs C
Figure 22. Line transient
O
VI = 6 to 20 V, RL = 500 Ω, TJ = 25°C, CI = 0, CO = 100 µF,
Rise Fall-Time = 200 ns
13/23
Typical characteristics
LM2931XX - LM2931AXX33 - LM2931AXX50 - LM2931BXX50
Figure 23. Line transient
VI = 14 V, IO = 100 mA, TJ = 25°C, CI = 0.1 µF, CO = 100 µF,
Rise Time = 500 ns, Fall-Time = 1 µs
14/23
LM2931XX - LM2931AXX33 - LM2931AXX50 - LM2931BXX50
Package mechanical data
7
Package mechanical data
®
In order to meet environmental requirements, ST offers these devices in ECOPACK
packages. These packages have a lead-free second level interconnect. The category of
second Level Interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com.
15/23
Package mechanical data
LM2931XX - LM2931AXX33 - LM2931AXX50 - LM2931BXX50
TO-92 mechanical data
mm.
Typ.
mils.
Dim.
Min.
Max.
4.95
0.51
4.95
3.94
2.67
1.40
15.49
2.41
1.52
0.56
Min.
170.1
14.2
Typ.
Max.
194.9
20.1
A
b
4.32
0.36
4.45
3.30
2.41
1.14
12.7
2.16
0.92
0.41
D
E
175.2
129.9
94.9
194.9
155.1
105.1
55.1
e
e1
L
44.9
500.0
85.0
609.8
94.9
R
S1
W
α
36.2
59.8
16.1
22.0
5°
5°
0102782/D
16/23
LM2931XX - LM2931AXX33 - LM2931AXX50 - LM2931BXX50
Package mechanical data
DPAK mechanical data
mm.
inch.
Dim.
Min.
Typ.
Max.
Min.
Typ.
Max.
A
A1
A2
B
2.2
0.9
2.4
1.1
0.23
0.9
5.4
0.6
0.6
6.2
0.086
0.035
0.001
0.025
0.204
0.017
0.019
0.236
0.094
0.043
0.009
0.035
0.212
0.023
0.023
0.244
0.03
0.64
5.2
b4
C
0.45
0.48
6
C2
D
D1
E
5.1
0.200
6.4
6.6
0.252
0.260
E1
e
4.7
0.185
0.090
2.28
e1
H
4.4
9.35
1
4.6
0.173
0.368
0.039
0.181
0.397
10.1
L
(L1)
L2
L4
R
2.8
0.8
0.110
0.031
0.6
0°
1
0.023
0.039
8°
0.2
0.008
V2
8°
0°
0068772-F
17/23
Package mechanical data
LM2931XX - LM2931AXX33 - LM2931AXX50 - LM2931BXX50
SO-8 mechanical data
mm.
Typ.
inch.
Typ.
Dim.
Min.
Max.
Min.
Max.
A
A1
A2
B
1.35
0.10
1.10
0.33
0.19
4.80
3.80
1.75
0.053
0.069
0.25
1.65
0.51
0.25
5.00
4.00
0.04
0.010
0.065
0.020
0.010
0.197
0.157
0.043
0.013
0.007
0.189
0.150
C
D
E
e
1.27
0.050
H
5.80
0.25
0.40
6.20
0.50
1.27
0.228
0.010
0.016
0.244
0.020
0.050
h
L
k
8° (max.)
ddd
0.1
0.04
0016023/C
18/23
LM2931XX - LM2931AXX33 - LM2931AXX50 - LM2931BXX50
Package mechanical data
Tape & reel DPAK-PPAK mechanical data
mm.
Typ.
inch.
Dim.
Min.
Max.
330
Min.
Typ.
Max.
12.992
0.519
A
C
12.8
20.2
60
13.0
13.2
0.504
0.795
2.362
0.512
D
N
T
22.4
7.00
10.60
2.75
4.1
0.882
0.2.76
0.417
0.105
0.161
0.319
Ao
Bo
Ko
Po
P
6.80
10.40
2.55
3.9
6.90
10.50
2.65
4.0
0.268
0.409
0.100
0.153
0.311
0.272
0.413
0.104
0.157
0.315
7.9
8.0
8.1
19/23
Package mechanical data
LM2931XX - LM2931AXX33 - LM2931AXX50 - LM2931BXX50
Tape & reel SO-8 mechanical data
mm.
Typ.
inch.
Typ.
Dim.
Min.
Max.
330
Min.
Max.
12.992
0.519
A
C
D
12.8
20.2
60
13.2
0.504
0.795
2.362
N
T
22.4
8.5
5.9
2.3
4.1
8.1
0.882
0.335
0.232
0.090
0.161
0.319
Ao
Bo
Ko
Po
P
8.1
5.5
2.1
3.9
7.9
0.319
0.216
0.082
0.153
0.311
20/23
LM2931XX - LM2931AXX33 - LM2931AXX50 - LM2931BXX50
Package mechanical data
Tape & reel for TO-92 mechanical data
mm.
inch.
Dim.
Min.
Typ.
Max.
Min.
Typ.
Max.
A1
T
T1
T2
d
4.80
3.80
1.60
2.30
0.48
0.189
0.150
0.063
0.091
0.019
P0
P2
12.5
5.65
2.44
12.9
7.05
2.94
0.492
0.222
0.096
0.508
0.278
0.116
F1, F2
delta H
W
W0
W1
W2
H
H0
H1
D0
t
L1
delta P
u
Φ1
Φ2
2.54
2
18.00
0.100
0.079
0.709
17.5
5.7
8.5
19.0
6.3
9.25
0.689
0.224
0.335
0.748
0.248
0.364
0.50
18.50
0.20
0.728
18.70
16.50
0.726
0.650
15.50
0.610
0.150
25.00
0.984
3.8
4.2
0.165
0.90
3
1
50
360
30
0.035
0.118
0.039
1.968
14.173
1.181
delta P
T
A1
T2
T1
H1
delta H
H
H0
d
L
W2
l1
W
W0
W1
F1
F2
P0
D0
t
P2
DRAWING NOT IN SCALE
21/23
Revision history
LM2931XX - LM2931AXX33 - LM2931AXX50 - LM2931BXX50
8
Revision history
Table 8.
Document revision history
Revision
Date
Changes
21-Jun-2004
16-Jun-2006
27-Jul-2007
21-Aug-2007
22-Nov-2007
11-Feb-2008
10-Jul-2008
12
13
14
15
16
17
18
Document updated.
Order codes updated.
Added Table 1 in cover page.
Added root part number - (see Table 1)
Modified: Table 1.
Modified: Table 1 on page 1.
Removed package TO-220, modified Table 1 on page 1.
22/23
LM2931XX - LM2931AXX33 - LM2931AXX50 - LM2931BXX50
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2008 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
23/23
LM2931BZ50R 替代型号
型号 | 制造商 | 描述 | 替代类型 | 文档 |
LM2931AZ-5.0RAG | ONSEMI | 100 mA, Adjustable Output, LDO Voltage Regulator with 60 V Load Dump Protection | 功能相似 | |
LM2931AZ50R | STMICROELECTRONICS | Very low drop voltage regulators with inhibit function | 功能相似 | |
LM2931AZ-5.0/NOPB | TI | LM2931-N Series Low Dropout Regulators | 功能相似 |
LM2931BZ50R 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
LM2931C/AC | ONSEMI | AC-DC Offline Switching Controllers/Regulators | 获取价格 | |
LM2931CD | ONSEMI | LOW DROPOUT VOLTAGE REGULATORS | 获取价格 | |
LM2931CD | MOTOROLA | LOW DROPOUT VOLTAGE REGULATORS | 获取价格 | |
LM2931CD2T | ONSEMI | LOW DROPOUT VOLTAGE REGULATORS | 获取价格 | |
LM2931CD2T | MOTOROLA | LOW DROPOUT VOLTAGE REGULATORS | 获取价格 | |
LM2931CD2TG | ONSEMI | 100 mA, Adjustable Output, LDO Voltage Regulator with 60 V Load Dump Protection | 获取价格 | |
LM2931CD2TR4 | ONSEMI | 100 mA, Adjustable Output, LDO Voltage Regulator with 60 V Load Dump Protection | 获取价格 | |
LM2931CD2TR4 | MOTOROLA | Adjustable Positive LDO Regulator, 24V Min, 24V Max, 0.6V Dropout, BIPolar, PSSO5, PLASTIC, D2PAK-5 | 获取价格 | |
LM2931CD2TR4G | ONSEMI | 100 mA, Adjustable Output, LDO Voltage Regulator with 60 V Load Dump Protection | 获取价格 | |
LM2931CD2TT4 | MOTOROLA | 24 V-ADJUSTABLE POSITIVE LDO REGULATOR, 0.6V DROPOUT, PSSO5, PLASTIC, D2PAK-5 | 获取价格 |
LM2931BZ50R 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6