NUCLEO-G071RB [STMICROELECTRONICS]
SPI display expansion board for STM32 Nucleo;型号: | NUCLEO-G071RB |
厂家: | ST |
描述: | SPI display expansion board for STM32 Nucleo |
文件: | 总5页 (文件大小:9126K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
X-NUCLEO-GFX01M1
Data brief
SPI display expansion board for STM32 Nucleo
Features
•
•
•
•
2.2” SPI QVGA TFT LCD
64-Mbit SPI NOR Flash memory
Joystick for easy menu navigation
Compatible with selected STM32 Nucleo boards using the ST morpho interface
Description
The X-NUCLEO-GFX01M1 expansion board adds graphic user interface (GUI)
capability to STM32 Nucleo boards.
X-NUCLEO-GFX01M1 top view.
Picture is not contractual.
It features a 2.2” SPI QVGA TFT display as well as a 64-Mbit SPI NOR Flash
memory for storing graphic images, texts and texture. The expansion board also
offers a joystick for GUI navigation.
X-NUCLEO-GFX01M1 uses the ST morpho connector. It is compatible with the
NUCLEO-F030R8, NUCLEO-F070RB, NUCLEO-F072RB, NUCLEO-F091RC,
NUCLEO-F401RE, NUCLEO-F410RB, NUCLEO-F411RE, NUCLEO-F446RE,
NUCLEO-G071RB, NUCLEO-L053R8, NUCLEO-L073RZ, NUCLEO-L412RB-P,
NUCLEO-L433RC-P, NUCLEO-L452RE, NUCLEO-L452RE-P and NUCLEO-
L476RG Nucleo boards.
Product status link
X-NUCLEO-GFX01M1
DB4236 - Rev 1 - August 2020
www.st.com
For further information contact your local STMicroelectronics sales office.
X-NUCLEO-GFX01M1
Ordering information
1
Ordering information
To order the X-NUCLEO-GFX01M1 module, refer to Table 1.
Table 1. Ordering information
Order code
Board reference
MB1642
User manual
UM2750
Target STM32
X-NUCLEO-GFX01M1
Not applicable
The STM32 Nucleo boards feature STM32 32-bit microcontrollers based on the Arm® Cortex®‑M processor.
Note:
Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
1.1
Product marking
The sticker located on the top or bottom side of the PCB board shows the information about product identification
such as board reference, revision and serial number.
The first identification line has the following format: “MBxxxx-Variant-yzz”, where “MBxxxx” is the board reference,
“Variant” (optional) identifies the mounting variant when several exist, "y" is the PCB revision and "zz" is the
assembly revision: for example B01.
The second identification line is the board serial number used for traceability.
Evaluation tools marked as “ES” or “E” are not yet qualified and therefore not ready to be used as reference
design or in production. Any consequences deriving from such usage will not be at ST charge. In no event, ST will
be liable for any customer usage of these engineering sample tools as reference designs or in production.
“E” or “ES” marking examples of location:
•
On the targeted STM32 that is soldered on the board (For an illustration of STM32 marking, refer to the
STM32 datasheet “Package information” paragraph at the www.st.com website).
•
Next to the evaluation tool ordering part number that is stuck or silk-screen printed on the board.
DB4236 - Rev 1
page 2/5
X-NUCLEO-GFX01M1
Development environment
2
Development environment
2.1
Demonstration software
The demonstration software supporting the X-NUCLEO-GFX01M1 expansion board is available from the X-
CUBE-DISPLAY STM32Cube Expansion Package and must be programmed into the corresponding Nucleo
board. The latest versions of the demonstration source code and associated documentation can be downloaded
from www.st.com.
DB4236 - Rev 1
page 3/5
X-NUCLEO-GFX01M1
Revision history
Table 2. Document revision history
Date
14-Aug-2020
Version
Changes
1
Initial release.
DB4236 - Rev 1
page 4/5
X-NUCLEO-GFX01M1
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST
products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST
products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or service
names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2020 STMicroelectronics – All rights reserved
DB4236 - Rev 1
page 5/5
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明