P9NK90Z [STMICROELECTRONICS]
N-CHANNEL 900V - 1.1Ohm - 8A - TO-220/FP-D2PAK-TO-247 Zener-Protected SuperMESH MOSFET; N沟道900V - 1.1Ohm - 8A - TO- 220 / FP- D2PAK , TO- 247齐纳保护超网MOSFET型号: | P9NK90Z |
厂家: | ST |
描述: | N-CHANNEL 900V - 1.1Ohm - 8A - TO-220/FP-D2PAK-TO-247 Zener-Protected SuperMESH MOSFET |
文件: | 总16页 (文件大小:578K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
STB9NK90Z - STFPNK90Z
STP9NK90Z - STW9NK90Z
N-channel 900V - 1.1Ω - 8A - TO-220 /FP- D2PAK - TO-247
Zener-protected superMESHTM MOSFET
General features
Type
VDSS
RDS(on)
ID
Pw
STB9NK90Z
STW9NK90Z
STP9NK90Z
STF9NK90Z
900V
900V
900V
900V
<1.3Ω
<1.3Ω
<1.3Ω
<1.3Ω
8A
8A
8A
8A
160 W
160 W
160 W
160 W
3
3
1
2
1
D²PAK
TO-220
TO-247
■ Extremely high dv/dt capability
■ 100% avalanche tested
■ Gate charge minimized
3
2
1
TO-220FP
Description
The SuperMESH™ series is obtained through an
extreme optimization of ST’s well established
strip-based PowerMESH™ layout. In addition to
pushing on-resistance significantly down, special
care is taken to ensure a very good dv/dt
Internal schematic diagram
capability for the most demanding applications.
Applications
■ Switching application
Order codes
Part number
Marking
Package
Packaging
STB9NK90Z
STF9NK90Z
STP9NK90Z
STW9NK90Z
B9NK90Z
F9NK90Z
P9NK90Z
W9NK90Z
D²PAK
TO-220FP
TO-220
Tape & reel
Tube
Tube
TO-247
Tube
July 2006
Rev 4
1/16
www.st.com
16
Contents
STB9NK90Z - STF9NK90Z - STP9NK90Z - STW9NK90Z
Contents
1
2
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.1
Electrical characteristics (curves)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3
4
5
6
Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2/16
STB9NK90Z - STF9NK90Z - STP9NK90Z - STW9NK90Z
Electrical ratings
1
Electrical ratings
Table 1.
Symbol
Absolute maximum ratings
Value
Parameter
Unit
TO-220/D²PAK/
TO-247
TO-220FP
VDS
VDGR
VGS
ID
Drain-source voltage (VGS = 0)
Drain-gate voltage (RGS = 20KΩ)
Gate-source voltage
900
V
V
V
900
30
8(1)
5(1)
Drain current (continuous) at TC = 25°C
8
A
A
ID
Drain current (continuous) at TC=100°C
5
(2)
32(1)
40
IDM
Drain current (pulsed)
Total dissipation at TC = 25°C
Derating Factor
32
160
1.28
4
A
W
PTOT
0.32
W/°C
KV
V/ns
V
Vesd(G-S) G-S ESD (HBM C=100pF, R=1.5kΩ)
dv/dt(3)
Peak diode recovery voltage slope
Insulation withstand voltage (DC)
4.5
--
VISO
2500
TJ
Operating junction temperature
Storage temperature
-55 to 150
°C
Tstg
1. Limited only by maximum temperature allowed
2. Pulse width limited by safe operating area
3. ISD ≤10A, di/dt ≤200A/µs,VDD ≤V(BR)DSS, Tj ≤TJMAX
Table 2.
Symbol
Thermal data
Value
Parameter
Unit
TO-220
TO-20FP
D²PAK
TO-247
Rthj-case
Rthj-a
Thermal resistance junction-case Max
Thermal resistance junction-ambient Max
0.78
3.1
0.78
50
°C/W
°C/W
62.5
Maximum lead temperature for soldering
purpose
Tl
300
°C
Table 3.
Symbol
Avalanche characteristics
Parameter
Value
Unit
Avalanche current, repetitive or not-repetitive
(pulse width limited by Tj Max)
IAS
8
A
Single pulse avalanche energy
EAS
300
mJ
(starting Tj=25°C, Id=Iar, VDD=50V)
3/16
Electrical characteristics
STB9NK90Z - STF9NK90Z - STP9NK90Z - STW9NK90Z
2
Electrical characteristics
(T
=25°C unless otherwise specified)
CASE
Table 4.
Symbol
On/off states
Parameter
Test conditions
Min.
Typ. Max. Unit
Drain-source breakdown
voltage
V(BR)DSS
ID = 1mA, VGS= 0
900
V
V
DS = Max rating,
1
µA
µA
Zero gate voltage drain
current (VGS = 0)
IDSS
VDS = Max rating @125°C
50
Gate body leakage current
(VDS = 0)
IGSS
VGS = 20V, VDS = 0
±10
nA
VGS(th)
RDS(on)
VDS= VGS, ID = 100µA
VGS= 10V, ID= 3.6A
Gate threshold voltage
3
3.75
1.1
4.5
1.3
V
Static drain-source on
resistance
Ω
Table 5.
Symbol
Dynamic
Parameter
Test conditions
Min. Typ. Max. Unit
(1)
VDS =15V, ID = 3.6 A
Forward transconductance
5.75
S
gfs
Ciss
Coss
Crss
Input capacitance
2115
190
40
pF
pF
pF
Output capacitance
VDS =25V, f=1 MHz, VGS=0
Reverse transfer
capacitance
(2)
Equivalent output
capacitance
Coss eq
.
VGS=0, VDS =0V to 720V
115
pF
Qg
Qgs
Qgd
VDD=720V, ID = 8A
VGS =10V
Total gate charge
Gate-source charge
Gate-drain charge
72
14
38
nC
nC
nC
(see Figure 19)
1. Pulsed: pulse duration=300µs, duty cycle 1.5%
2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS
inceases from 0 to 80% VDSS
4/16
STB9NK90Z - STF9NK90Z - STP9NK90Z - STW9NK90Z
Electrical characteristics
Min. Typ. Max. Unit
Table 6.
Symbol
Switching times
Parameter
Test conditions
VDD=450 V, ID=4A,
RG=4.7Ω, VGS=10V
(see Figure 20)
td(on)
tr
Turn-on delay time
Rise Time
22
13
ns
ns
V
DD=450 V, ID=4A,
td(off)
tf
Turn-off delay time
Fall time
55
28
ns
ns
RG=4.7Ω, VGS=10V
(see Figure 20)
tr(Voff)
VDD=720 V, ID=8A,
RG=4.7Ω, VGS=10V
(see Figure 20)
Off-voltage Rise Time
Fall Time
53
11
22
ns
ns
ns
tf
Cross-over Time
tc
Table 7.
Symbol
Gate-source zener diode
Parameter
Test conditions
Min. Typ. Max. Unit
(1)
Igs= 1mA
Gate-Source Breakdown
Voltage
BVGSO
30
V
(Open Drain)
1. The built-in back-to-back Zener diodes have specifically been designed to enhance not only the device’s
ESD capability, but also to make them safely absorb possible voltage transients that may occasionally be
applied from gate to source. In this respect the Zener voltage is appropriate to achieve an efficient and
cost-effective intervention to protect the device’s integrity. These integrated Zener diodes thus avoid the
usage of external components.
Table 8.
Symbol
Source drain diode
Parameter
Test conditions
Min Typ. Max Unit
ISD
Source-drain current
8
A
A
V
(1)
Source-drain current (pulsed)
Forward on voltage
32
1.6
ISDM
(2)
ISD=8A, VGS=0
ISD=8A,
VSD
trr
Reverse recovery time
Reverse recovery charge
Reverse recovery current
950
10
ns
µC
A
Qrr
di/dt = 100A/µs,
VDD=50V, Tj=150°C
21
IRRM
1. Pulse width limited by safe operating area
2. Pulsed: pulse duration=300µs, duty cycle 1.5%
5/16
Electrical characteristics
STB9NK90Z - STF9NK90Z - STP9NK90Z - STW9NK90Z
2.1
Electrical characteristics (curves)
Figure 1. Safe operating area for TO-220/
D²PAK
Figure 2. Thermal impedance for TO-220/
D²PAK
Figure 3. Safe operating area for TO-220FP
Figure 4. Thermal impedance for TO-220FP
Figure 5. Safe operating area for TO-247
Figure 6. Thermal impedance for TO-247
6/16
STB9NK90Z - STF9NK90Z - STP9NK90Z - STW9NK90Z
Electrical characteristics
Figure 7. Output characterisics
Figure 8. Transfer characteristics
Figure 9. Transconductance
Figure 10. Static drain-source on resistance
Figure 11. Gate charge vs gate-source voltage Figure 12. Capacitance variations
7/16
Electrical characteristics
STB9NK90Z - STF9NK90Z - STP9NK90Z - STW9NK90Z
Figure 13. Normalized gate threshold voltage Figure 14. Normalized on resistance vs
vs temperature
temperature
Figure 15. Source-drain diode forward
characteristics
Figure 16. Normalized B
vs temperature
VDSS
Figure 17. Maximum avalanche energy vs
temperature
8/16
STB9NK90Z - STF9NK90Z - STP9NK90Z - STW9NK90Z
Test circuit
3
Test circuit
Figure 18. Switching times test circuit for
resistive load
Figure 19. Gate charge test circuit
Figure 20. Test circuit for inductive load
switching and diode recovery times
Figure 21. Unclamped Inductive load test
circuit
Figure 22. Unclamped inductive waveform
Figure 23. Switching time waveform
9/16
Package mechanical data
STB9NK90Z - STF9NK90Z - STP9NK90Z - STW9NK90Z
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect . The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
10/16
STB9NK90Z - STF9NK90Z - STP9NK90Z - STW9NK90Z
Package mechanical data
TO-220 MECHANICAL DATA
mm.
TYP
inch
DIM.
MIN.
4.40
0.61
1.15
0.49
15.25
10
MAX.
4.60
0.88
1.70
0.70
15.75
10.40
2.70
5.15
1.32
6.60
2.72
14
MIN.
0.173
0.024
0.045
0.019
0.60
TYP.
MAX.
0.181
0.034
0.066
0.027
0.620
0.409
0.106
0.202
0.052
0.256
0.107
0.551
0.154
A
b
b1
c
D
E
0.393
0.094
0.194
0.048
0.244
0.094
0.511
0.137
e
2.40
4.95
1.23
6.20
2.40
13
e1
F
H1
J1
L
L1
L20
L30
øP
Q
3.50
3.93
16.40
28.90
0.645
1.137
3.75
2.65
3.85
2.95
0.147
0.104
0.151
0.116
11/16
Package mechanical data
STB9NK90Z - STF9NK90Z - STP9NK90Z - STW9NK90Z
TO-220FP MECHANICAL DATA
mm.
TYP
inch
TYP.
DIM.
MIN.
4.4
MAX.
4.6
2.7
2.75
0.7
1
MIN.
0.173
0.098
0.098
0.017
0.030
0.045
0.045
0.195
0.094
0.393
MAX.
0.181
0.106
0.108
0.027
0.039
0.067
0.067
0.204
0.106
0.409
A
B
2.5
D
2.5
E
0.45
0.75
1.15
1.15
4.95
2.4
F
F1
F2
G
1.7
1.7
5.2
2.7
10.4
G1
H
10
L2
L3
L4
L5
L6
L7
Ø
16
0.630
28.6
9.8
2.9
15.9
9
30.6
10.6
3.6
1.126
.0385
0.114
0.626
0.354
0.118
1.204
0.417
0.141
0.645
0.366
0.126
16.4
9.3
3
3.2
L3
L6
L7
1
2 3
L5
L2
L4
12/16
STB9NK90Z - STF9NK90Z - STP9NK90Z - STW9NK90Z
Package mechanical data
TO-247 MECHANICAL DATA
mm.
TYP
inch
DIM.
MIN.
4.85
2.20
1.0
MAX.
5.15
MIN.
0.19
TYP.
MAX.
0.20
A
A1
b
2.60
0.086
0.039
0.079
0.118
0.015
0.781
0.608
0.102
0.055
0.094
0.134
0.03
1.40
b1
b2
c
2.0
2.40
3.0
3.40
0.40
19.85
15.45
0.80
D
20.15
15.75
0.793
0.620
E
e
5.45
18.50
5.50
0.214
0.728
0.216
L
14.20
3.70
14.80
4.30
0.560
0.14
0.582
0.17
L1
L2
øP
øR
S
3.55
4.50
3.65
5.50
0.140
0.177
0.143
0.216
13/16
Packaging mechanical data
STB9NK90Z - STF9NK90Z - STP9NK90Z - STW9NK90Z
5
Packaging mechanical data
2
D PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
mm
MIN. MAX. MIN. MAX.
330 12.992
inch
DIM.
A
B
C
D
G
N
T
1.5
12.8
20.2
24.4
100
0.059
13.2 0.504 0.520
0795
26.4 0.960 1.039
3.937
30.4
1.197
BASE QTY
BULK QTY
1000
TAPE MECHANICAL DATA
1000
mm
inch
DIM.
MIN. MAX. MIN. MAX.
10.5 10.7 0.413 0.421
15.7 15.9 0.618 0.626
A0
B0
D
1.5
1.6 0.059 0.063
D1
E
1.59 1.61 0.062 0.063
1.65 1.85 0.065 0.073
F
11.4
4.8
3.9
11.9
1.9
50
11.6 0.449 0.456
5.0 0.189 0.197
4.1 0.153 0.161
12.1 0.468 0.476
2.1 0.075 0.082
1.574
K0
P0
P1
P2
R
T
0.25 0.35 0.0098 0.0137
23.7 24.3 0.933 0.956
W
* on sales type
14/16
STB9NK90Z - STF9NK90Z - STP9NK90Z - STW9NK90Z
Revision history
6
Revision history
Table 9.
Date
Drevision history
Revision
Changes
08-Sep-2005
27-Oct-2005
20-Jul-2006
2
3
4
Complete version
Inserted ecopack indication
New template, no content change
15/16
STB9NK90Z - STF9NK90Z - STP9NK90Z - STW9NK90Z
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2006 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
16/16
相关型号:
©2020 ICPDF网 联系我们和版权申明