SOC2920AHRB [STMICROELECTRONICS]
30mA, 60V, 2 CHANNEL, NPN, Si, SMALL SIGNAL TRANSISTOR, ROHS COMPLIANT, CERAMIC, LCC-6;
| 型号： | SOC2920AHRB |
| 厂家： | 
ST |
| 描述： | 30mA, 60V, 2 CHANNEL, NPN, Si, SMALL SIGNAL TRANSISTOR, ROHS COMPLIANT, CERAMIC, LCC-6 CD 晶体管 |
| 文件： | 总10页 (文件大小：303K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
2N2920AHR
Hi-Rel NPN dual matched bipolar transistor 60 V, 0.03 A
Datasheet — production data
Features
BVCEO
IC (max)
FE at 10 V - 150 mA
Operating temperature range
60 V
0.03 A
H
> 300
-65°C to +200°C
■ Hi-Rel NPN dual matched bipolar transistor
■ Linear gain characteristics
TO-77
LCC-6
■ ESCC qualified
■ European preferred part list - EPPL
Figure 1.
Internal schematic diagram
■ Radiation level: lot specific total dose contact
marketing for specified level
Description
The 2N2920AHR is a silicon planar epitaxial NPN
transistor in TO-77 and LCC-6 packages. It is
specifically designed for aerospace Hi-Rel
applications and ESCC qualified according to the
5207-002 specification. In case of conflict
between this datasheet and ESCC detailed
specification, the latter prevails.
Table 1.
Device summary
Order codes
Packages
Lead finish
Marking
Type
EPPL
Packaging
520700203
520700206
Gold
Solder Dip
2N2920AHR
TO-77
ESCC Flight
Strip pack
Engineering
model
2N2920AT1
SOC2920A
TO-77
LCC-6
LCC-6
Gold
Gold
2N2920AT1
SOC2920A
Strip pack
Waffle pack
Waffle pack
Engineering
model
520700212
520700215
Gold
Solder Dip
SOC2920AHRB
ESCC Flight
Yes
November 2012
Doc ID 15383 Rev 3
1/10
This is information on a product in full production.
www.st.com
10
Electrical ratings
2N2920AHR
1
Electrical ratings
Table 2.
Symbol
Absolute maximum ratings
Parameter
Value
Unit
VCBO
VCEO
VEBO
IC
Collector-base voltage (IE = 0)
Collector-emitter voltage (IB = 0)
Emitter-base voltage (IC = 0)
Collector current
60
60
6
V
V
V
30
mA
Total dissipation at Tamb ≤25 °C
for SOC2920A (1)
0.3
0.5
0.6
1
W
W
W
W
for SOC2920A (2)
for 2N2920AHR (1) (3)
for 2N2920AHR (2) (3)
Total dissipation at Tc ≤25 °C
for SOC2920A (1)
PTOT
0.75
1.25
W
W
for SOC2920A (2)
TSTG
TJ
Storage temperature
-65 to 200
200
°C
°C
Max. operating junction temperature
1. One section.
2. Both sections.
3. When mounted on a 15 x 15 x 0.6 mm ceramic substrate.
Table 3.
Symbol
Thermal data for through-hole package
Parameter
Value
233
Unit
Thermal resistance junction-case (1)
Thermal resistance junction-case (2)
__
__
max
max
°C/W
°C/W
RthJC
140
Thermal resistance junction-ambient (1) __
Thermal resistance junction-ambient (2) __
max
max
583
350
°C/W
°C/W
RthJA
1. One section.
2. Both sections.
Table 4.
Symbol
Thermal data for SMD package
Parameter
Value
Unit
Thermal resistance junction-ambient (1)(3) __
Thermal resistance junction-ambient (2)(3) __
max
max
291
175
°C/W
°C/W
RthJA
1. One section.
2. Both sections.
3. When mounted on a 15 x 15 x 0.6 mm ceramic substrate.
2/10
Doc ID 15383 Rev 3
2N2920AHR
Electrical characteristics
2
Electrical characteristics
Tcase = 25 °C unless otherwise specified
Table 5.
Symbol
Electrical characteristics
Parameter
Test conditions
VCB = 45 V
VCB = 45 V
Min. Typ. Max. Unit
2
nA
µA
Collector-base cut-off
current (IE = 0)
ICBO
ICEO
IEBO
TC = 150 °C
10
Collector cut-off
current (IB = 0)
VCE = 5 V
VEB = 5 V
2
2
nA
nA
Emitter-base cut-off
current (IC = 0)
Collector-base
breakdown voltage
V(BR)CBO
IC = 10 µA
IC = 10 mA
IE = 10 µA
60
60
6
V
V
V
(IE = 0)
Collector-emitter
breakdown voltage
(1)
V(BR)CEO
(IB = 0)
Emitter-base
breakdown voltage
V(BR)EBO
(IC = 0)
Collector-emitter
saturation voltage
(1)
VCE(sat)
IC = 1 mA
IC = 1 mA
IB = 0.1 mA
IB = 0.1 mA
0.35
V
V
Base-emitter
saturation voltage
(1)
VBE(sat)
0.5
1
IC = 10 µA
IC = 100 µA
IC = 1 mA
VCE = 5 V
VCE = 5 V
VCE = 5 V
VCE = 5 V
150
225
300
600
(1)
hFE
DC current gain
IC = 10 µA
Tamb = -55 °C
50
IC = 100 µA
VCE = 5 V
DC current transfer
ratio comparison
hFE2-1 / hFE2-2
0.91
1.1
Tamb = -55 °C to +25 °C
IC = 100 µA
VCE = 5 V
DC current transfer
ratio comparison
h
FE2-1 / hFE2-2
0.85
1.18
Tamb = -55 °C to +125 °C
VCE = 5 V
VCE = 5 V
IC = 10 µA
IC = 100 µA
IC = 1 mA
2
1.5
2
mV
mV
mV
Δ⏐ VBE1
-
-
Base-emitter voltage
differential
VBE2
⏐
VCE = 5 V
VCE = 5 V
IC = 100 µA
Δ⏐ VBE1
Base-emitter voltage
differential
Tamb = -55 °C to +25 °C
0.4
0.5
mV
mV
VBE2
⏐
Tamb = +25 °C to +125 °C
Leakage current
between active
devices
V = 50 V to E2, B2, C2
V = 0 V to E1, B1, C1
ILk
5
µA
Doc ID 15383 Rev 3
3/10
Electrical characteristics
2N2920AHR
Table 5.
Symbol
Electrical characteristics (continued)
Parameter
Test conditions
Min. Typ. Max. Unit
fT
Transition frequency
IC = 0.5 mA
VCE = 5 V
IC = 1 mA
60
MHz
VCE = 5 V
f = 1 kHz
hob
Output admittance
Input impedance
1
32
6
µmho
VCB = 5 V
f = 1 kHz
IC = 1 mA
hib
25
W
Output capacitance
(IE = 0)
VCB = 5 V
Cobo
pF
100 kHz ≤ f ≤1 MHz
V
CE = 5 V
IC = 10 µA
f = 1 kHz
NF
NF
Noise figure
RS = 10 kΩ
3
3
dB
dB
Bandwidth = 200 Hz
CE = 5 V IC = 10 µA
RS = 10 kΩ
V
Noise figure
10 Hz ≤ f ≤ 15.7 kHz
Bandwidth = 200 Hz
1. Pulsed duration = 300 µs, duty cycle ≤1.5%
4/10
Doc ID 15383 Rev 3
2N2920AHR
Electrical characteristics
2.1
Electrical characteristics (curves)
Figure 2.
hFE @ VCE = 5 V
Figure 3.
VCE(sat) @ hFE =10
AM16342v1
AM16343v1
0.16
0.14
0.12
0.10
1000
T
T
J
J
=
=
-55°C
-40°C
25°C
TJ
=
T
T
J
J
=
=
110°C
125°C
0.08
0.06
0.04
T
T
T
T
T
J
J
=
-55°C
=-40°C
25°C
J
J
J
=
=
=
110°C
125°C
0.02
100
0.1
0.0001
0.001
0.01
0.1
0.0001
0.001
0.01
IC(A)
IC(A)
Figure 4.
VBE(sat) @ hFE =10
AM16344v1
1
0.9
0.8
0.7
0.6
T
T
J
J
=
=
-55°C
-40°C
25°C
0.5
0.4
T
J
=
T
T
J
J
=
=
110°C
125°C
0.3
0.0001
0.001
0.1
0.01
IC(A)
Doc ID 15383 Rev 3
5/10
Package mechanical data
2N2920AHR
3
Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
Table 6.
TO-77 mechanical data
Dim.
mm
Min.
Typ.
Max.
A
B
C
D
E
F
G
H
I
12.70
0.40
0.55
6.11
8.15
9.05
4.85
0.71
0.90
42°
13.70
0.47
0.76
6.47
8.25
9.25
5.31
0.85
1.00
48°
5.08
L
6/10
Doc ID 15383 Rev 3
2N2920AHR
Package mechanical data
Figure 5.
TO-77 drawing
B
A
D
C
E
F
L
3
2
5
1
G
6
7
I
H
0015959_F
Doc ID 15383 Rev 3
7/10
Package mechanical data
2N2920AHR
Table 7.
LCC-6 mechanical data
mm
Dim.
Min.
Typ.
Max.
A
C
D
E
1.53
0.78
1.52
12.4
5.77
4.19
6.10
0.56
3.86
1.14
2.41
0.64
1.96
0.99
1.78
1.55
5.92
4.45
6.35
0.71
4.01
1.40
2.67
1.14
0.89
1.65
1.40
5.84
4.31
6.22
0.63
3.94
1.27
2.54
0.89
0.23
2.28
F
G
I
L
M
N
N1
N2
r
D1
2.08
2.49
Figure 6.
LCC-6 drawing
I
A
D
D1
F
E
L
r
G
M
N1
N
C
N2
7098021_C
8/10
Doc ID 15383 Rev 3
2N2920AHR
Revision history
4
Revision history
Table 8.
Date
Document revision history
Revision
Changes
10-Dec-2008
05-Jan-2010
1
2
Initial release
Modified Table 1 on page 1
Added: Section 2.1: Electrical characteristics (curves)
Updated: Section 3: Package mechanical data
15-Nov-2012
3
Doc ID 15383 Rev 3
9/10
2N2920AHR
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2012 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
10/10
Doc ID 15383 Rev 3
相关型号：
©2020 ICPDF网 联系我们和版权申明