ST16601 [STMICROELECTRONICS]
Smartcard MCU With 1088 Bytes EEPROM; 智能卡微控制器与1088字节EEPROM型号: | ST16601 |
厂家: | ST |
描述: | Smartcard MCU With 1088 Bytes EEPROM |
文件: | 总2页 (文件大小:30K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
®
ST16601
Smartcard MCU
With 1088 Bytes EEPROM
DATA BRIEFING
■ 8 BIT ARCHITECTURE CPU
■ 6 KBytes of USER ROM SECTOR
COMBINATIVE
■ 1 KByte of SYSTEM ROM
■ 128 Bytes of RAM
■ 1088 Bytes of EEPROM, SECTOR
COMBINATIVE
– Highly reliable CMOS EEPROM technology
– 10 year data retention
Micromodule (D3)
– 300,000 Erase/Write cycle endurance
– Protected One Time Programmable block (32
or 64 bytes)
– 1 to 16 bytes block either Erase or Write in
single cycle programming
■ EXTENDED VOLTAGE OPERATION
– V Range: 2.7V to 5.5V
CC
■ SERIAL ACCESS, ISO 7816-3 COMPATIBLE
■ POWER SAVING STANDBY MODE
■ UP TO 5 MHz INTERNAL OPERATING
FREQUENCY
Wafer
■ VERY HIGH SECURITY FEATURES
INCLUDING EEPROM FLASH ERASE
■ CONTACT ASSIGNMENT COMPATIBLE ISO
7816-2
■ ESD PROTECTION GREATER THAN 5000V
■ 2 OPERATING CONFIGURATIONS
– ISSUER
– USER
BD.601/9809V5
1/2
This is Brief Data from STMicroelectronics. Details are subject to change without notice. For complete data, please contact
your nearest Sales Office or SmartCard Products Divison, Rousset, France. Fax: (+33) 4 42 25 87 29
ST16601
DESCRIPTION
Reliability data related to the ST16601 product
manufactured using STMicroelectronics ad-
vanced CMOS EEPROM technology confirm data
retention up to 10 years and endurance up to
300,000 Erase/Write cycles.
The ST16601, a member of the standard ST16
device family, is a serial access microcontroller
especially designed for high volume and cost
competitive Smartcard applications where
firmware security algorithm must be implemented.
The ST16601 is based on 8 bit CPU core and in-
cludes on chip memories: 128 Bytes of RAM, 6
KBytes of USER ROM, 1 KByte of SYSTEM ROM,
and 1088 Bytes of EEPROM.
As all other ST16 family members, the ST16601 is
fully compatible with the ISO standards for Smart-
card applications.
Software development (ROM code, options) can
be completed by the ST16-19HDS development
system.
Both ROM and EEPROM memories can be con-
figured into two sectors. Access rules from any
memory section or sector to any other are set-up
by the User’s defined Memory Access Control Ma-
trix (MACM).
The ST16601 can be delivered either in unsawn or
sawn wafers, 180 or 275 micron thickness as well
as in micromodule package.
Figure 1. Block Diagram
V
GENERATION
PP
RAM
SYSTEM
ROM
ROM
8 BIT
CPU
6 KBytes
128
1 KBtytes
EEPROM
1088 Bytes
BYTES
SECTORS
COMBIN.
SECTORS COMBINATIVE
SECT.
S
SECT. SECT.
SECTOR
SECTOR
B
A
B
A
MEMORY ACCESS CONTROL MATRIX
INTERNAL BUS
CLK
RST
SERIAL I/0's
INTERFACE
NUMBER
GENERATOR
SECURITY
LOGIC
V
CC
I/O1
I/O2
GND
SCP 102b/DS
2/2
相关型号:
ST16C1450CJ28-F
Serial I/O Controller, 1 Channel(s), 0.1875MBps, CMOS, PQCC28, GREEN, PLASTIC, LCC-28
EXAR
ST16C1450CJ28TR-F
Serial I/O Controller, 1 Channel(s), 0.1875MBps, CMOS, PQCC28, GREEN, PLASTIC, LCC-28
EXAR
©2020 ICPDF网 联系我们和版权申明