ST7232X-EVAL [STMICROELECTRONICS]
Insemâs ST-STEP64 Evaluation Board for ST7232x and ST7252x; Insemâ ???? s ST- STEP64评估板用于ST7232x和ST7252x型号: | ST7232X-EVAL |
厂家: | ST |
描述: | Insemâs ST-STEP64 Evaluation Board for ST7232x and ST7252x |
文件: | 总3页 (文件大小:102K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ST7232X-EVAL
Insem’s ST-STEP64 Evaluation Board for ST7232x and ST7252x
DATA BRIEF
The Insem ST-STEP64 Evaluation Board
(ST7232X-EVAL) is an adaptable, full-featured
evaluation board that allows you to try out the
features of the ST7232x and ST7252x, and
develop applications for these microcontrollers. Its
innovative design allows stand-alone operation
(application running on the included ST72F521R
microcontroller), or operation while connected to
your host-PC using the low-cost ST7MDT20-
DVP3 emulator.
Figure 1. ST-STEP64 evaluation board
Evaluation Board Architecture
ST-STEP64 evaluation board – a full-featured
evaluation board (PWM, LCD, I2C, UART, SPI,
CAN, potentiometer, LEDs, I/Os,... etc.), it
includes connectors and accessories to facilitate
switching
between
operation
with
a
microcontroller or the ST7MDT20-DVP3 emulator.
The ST-STEP64 also integrates a 10-pin ICC
connector for easy programming of the
microcontroller using an in-circuit programming
tool for ST7.
For more information about the ST7MDT20-
DVP3, please refer to the ST7-DVP3 Data Brief.
ST7 Visual Develop (STVD7)
– the free
TQFP64
14x14
Core
Module
with
integrated development environment for ST7
featuring simulator and full integration of Cosmic
and Metrowerks C toolsets. STVD7 runs on the
host PC, allowing you to debug applications with
an emulator, or to in-circuit program an application
to the target ST7 and in-circuit debug the
application while it runs on the ST7 on your
evaluation board.
ST72F521R9T – included daughter board with
ST72F521R97 that makes it possible to run your
application in stand-alone mode on the
microcontroller.
Also Includes pre-wired daughter board PCBs,
ready for mounting of connectors and supported
MCUs in TQFP80 (14x14), TQFP64 (10x10) and
TQFP32, so that you can make your own Core
Module for an ST7232x or ST7252x.
For more information, please refer to AN978 ST7
Visual Develop Key Features.
ST7MDT20-DVP3 emulator (not included) – this
low-cost ST7-DVP3 series emulator provides a
hardware interface with the host PC for debugging
application software and in-circuit programming of
the ST72F521R97 or other ST7 flash
microcontroller. The evaluation board comes with
the additional flat cable and the adapter required
for connection to an ST7MDT20-DVP3 emulator.
Key Features
ST-STEP64 Evaluation board:
The ST-STEP64 includes a complete range of
features for evaluating the ST7232x and ST7252x
microcontrollers, including:
Rev 1
1/3
December 2005
For further information contact your local STMicroelectronics sales office.
www.st.com
3
ST7232X-EVAL
■ 128 x 64 Graphic LCD display on a removable board.
■ Motor speed and beep control using PWM
■ RS232, I2C, SPI and CAN interfaces
■ External interrupt with 4 TACT switches
■ Internal variable resistance for ADC design
■ 8 LEDs for checking I/O port operating status
■ Integrated 7-Segment display for dynamic checking of I/O port operating status
■ IR sensor
■ ST-standard ICC connection for easy in-circuit programming
■ Wrapping area
For further information about this and other development tools for ST7, please refer to www.st.com/mcu.
Revision history
Date
Revision
Changes
18-November-2005
1
Initial release.
2/3
ST7232X-EVAL
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences
of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted
by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject
to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not
authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics.
All other names are the property of their respective owners
© 2005 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
3/3
相关型号:
ST72331
8-BIT MICROCONTROLLER (MCU) WITH 8/16K ROM/OTP/EPROM.256 EEPROM.384/512 BYTES RAM.ADC.WDG.SCI.SPI & 2 TIMERS - SDIP42/56. QFP44/64
ETC
ST72331J2
8-BIT MICROCONTROLLER (MCU) WITH 8/16K ROM/OTP/EPROM.256 EEPROM.384/512 BYTES RAM.ADC.WDG.SCI.SPI & 2 TIMERS - SDIP42/56. QFP44/64
ETC
ST72331J2B3/XXX
8-BIT, MROM, 8MHz, MICROCONTROLLER, PDIP42, 0.600 INCH, SHRINK, PLASTIC, DIP-42
STMICROELECTR
ST72331J4
8-BIT MICROCONTROLLER (MCU) WITH 8/16K ROM/OTP/EPROM.256 EEPROM.384/512 BYTES RAM.ADC.WDG.SCI.SPI & 2 TIMERS - SDIP42/56. QFP44/64
ETC
©2020 ICPDF网 联系我们和版权申明