ST7XXXX-SK/RAIS [STMICROELECTRONICS]

Raisonance’s complete, low-cost starter kits for ST7; Raisonance公司的完整的,低成本入门套件为ST7
ST7XXXX-SK/RAIS
型号: ST7XXXX-SK/RAIS
厂家: ST    ST
描述:

Raisonance’s complete, low-cost starter kits for ST7
Raisonance公司的完整的,低成本入门套件为ST7

文件: 总4页 (文件大小:74K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
ST7xxxx-SK/RAIS  
Raisonance’s complete, low-cost starter kits for ST7  
The REva starter kits are Raisonance’s  
complete, cost-effective solutions for starting  
application development and evaluating  
Starter kit key features  
Figure 1. REva starter kit for ST7  
ST7LITEx, ST7232x, ST7234x, ST7236x and  
ST7263B microcontrollers.  
Kits come with all the hardware and software  
developers need to start developing applications  
for ST7 microcontroller, including the REva  
evaluation board, target ST7 microcontrollers, the  
embedded RLink for in-circuit debugging and in-  
circuit programming and the Raisonance  
Integrated Development Environment (RIDE) with  
application builder.  
Starter kit architecture  
Embedded RLink – in-circuit debugging and  
programming  
tool  
that  
uses  
in-circuit  
communication (ICC) for ST7 and interfaces with  
the host PC via USB connection.  
Embedded RLink:  
USB interface to host PC  
In-circuit debugging (ICD)  
In-circuit programming (ICP)  
REva mother board – universal evaluation board  
designed for quick and easy evaluation of a  
complete range of features (I/Os, ADC, SPI, CAN,  
I2C...) for a variety of ST7s. It is powered from the  
RLink’s USB connection to the host PC.  
REva motherboard:  
REva daughterboards – interchangeable boards  
featuring different ST7 microcontrollers, make it  
easy to evaluate and develop applications for a  
complete range of MCUs from a single evaluation  
platform.  
1 standard SO-DIMM connector to plug in  
daughterboards.  
Digital and analog I/O evaluation features,  
including on-board LEDs, buttons, switches,  
external analog connector, temperature sensor  
and potentiometer  
RIDE software – Raisonance’s free integrated  
development environment drives the hardware  
and offers seamless control of all software  
development tools (compiler, assembler, linker,  
debugger, etc.) from an intuitive graphical  
interface. Fully integrates control of Cosmic C and  
Metrowerk’s C toolsets. Includes RBuilder, an  
easy-to-use graphical inter-face for starting an  
ST7 application from scratch without writing a  
single line of code.  
I²C EEPROM and bus  
RS232 driver and 2 DB9 connectors  
Prototyping area  
VDD settings for 1.8V, 3.3V and 5V  
microcontrollers  
USB powered, no external power required  
June 2006  
Rev 3  
1/4  
www.st.com  
4
STRxxx-SK/RAIS  
REva daughterboards:  
Interchangeable daughterboards featuring different ST7 microcontrollers make it possible to develop  
applications for a wide range of devices and may include additional device specific features.  
Table 1.  
REva daughterboards and additional features  
Daughterboard Supports development for... MCU on daughterboard  
Additional features  
ST7FLITE-SK/RAIS starter kit  
ST7LITE0  
ST7FLITE09Y0  
(SO16)  
Clock source selection jumper  
Oscillator footprint  
ST7LITE0  
ST7SUPERLITE  
ST7LITE1B  
ST7FLIT19BF1  
(SO20)  
Clock source selection jumper  
Oscillator footprint  
ST7LITE1B  
ST7LITE3  
ST7LITE1  
ST7LITE3  
ST7LITE2  
ST7FLITE39F2  
(SO20)  
Clock source selection jumper  
Oscillator footprint  
ST7232X-SK/RAIS starter kit  
ST72321  
ST72324  
ST72321B  
ST72325  
ST72F325J6  
(TQFP44)  
Clock source selection jumper  
Oscillator footprint  
ST72325J  
ST72F34X-SK/RAIS starter kit  
ST72260  
ST72264  
ST72262  
ST7256x  
ST72F264G2  
(SO28)  
Clock source selection jumper  
Oscillator footprint  
ST72264  
ST72F36X-SK/RAIS starter kit  
ST7236x  
ST72F361AR9  
(TQFP64)  
USB mini-B connector  
24MHz oscillator  
ST72361  
Clock source selection jumper  
ST72F63B-SK/RAIS starter kit  
ST7263B  
ST72F63BH6  
(TQFP48)  
USB mini-B connector  
24MHz oscillator  
ST7263B  
Clock source selection jumper  
RIDE-ST7:  
Free download from www.raisonance.com  
Color syntax highlighting editor  
Seamless control of Cosmic C and Metrowerks Project manager  
C toolsets for ST7  
Supports ST7-EMU3 and ST7-DVP3 series  
emulators  
RBuilder application builder (requires use of a C  
compiler) for quick, easy configuration of ST7  
peripherals and generation of associated  
application source code.  
Supports CodeCompressor, Raisonance’s  
optional post-link code optimizer. Applies  
optimizations such as inlining, factorization and  
peepholing.  
SIMICE-ST7 simulator  
High level debugger  
RIDE-ST7 is compatible with the free limited code-size versions of the Cosmic and Metrowerks C  
toolsets. For more information and free downloads, refer to www.cosmic-software.com or  
www.metrowerks.com.  
2/4  
Rev 3  
STRxxx-SK/RAIS  
Ordering information  
REva starter kits can be ordered from Raisonance or from your nearest ST Distributor or sales office. Kits  
are currently available for the ST7LITE (ST order code: ST7FLITE-SK/RAIS), ST7232x (ST order code:  
ST7232X-SK/RAIS), ST7234x (ST order code: ST72F34X-SK/RAIS), ST7236x (ST order code:  
ST72F36X-SK/RAIS) and ST7263B (ST order code: ST72F63B-SK/RAIS) microcontrollers.  
REva starter kits based on the same mother/daughterboard design, with embedded RLink, driven by  
RIDE software are also available for uPSD microcontrollers and the STR7 and STR9 ARM core-based  
microcontrollers. For more information refer to www.st.com/mcu.  
For more information and documentation, please refer to www.raisonance.com or the STMicroelectronics  
microcontroller support site, www.st.com/mcu.  
Revision history  
Date  
Revision  
Changes  
1-March-2005  
1
2
Initial release.  
24-August-2005  
• Added part number ST7232x-SK/RAIS and ST7LITE1B daughterboard  
• Added part number ST72F34X-SK/RAIS, ST72F36X-SK/RAIS and  
ST72F63B-SK/RAIS  
21-June-2006  
3
• Added daughterboard features to Table 1.  
Rev 3  
3/4  
Please Read Carefully:  
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the  
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any  
time, without notice.  
All ST products are sold pursuant to ST’s terms and conditions of sale.  
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no  
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.  
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this  
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products  
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such  
third party products or services or any intellectual property contained therein.  
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED  
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED  
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS  
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.  
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED,  
AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS,  
NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR  
SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE.  
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void  
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any  
liability of ST.  
ST and the ST logo are trademarks or registered trademarks of ST in various countries.  
Nomadik is a registered trademark of STMicroelectronics in Hong Kong, Japan, South Korea, Taiwan, International (China, Switzerland,  
Norway, Singapore, Turkey) European Community (CEE countries). Registration is pending in Canada, USA and Israel.  
Information in this document supersedes and replaces all information previously supplied.  
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.  
© 2006 STMicroelectronics - All rights reserved  
STMicroelectronics group of companies  
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -  
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America  
www.st.com  
4/4  
Rev 3  

相关型号:

ST8

Analog IC

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC

ST80-10S

USB Connector, 10 Contact(s), Male, Straight, Surface Mount Terminal, Locking, Receptacle

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
HRS

ST80-14MF_10

Power zener Diode

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SHINDENGEN

ST80-18P/4

Interface Connectors for Miniature, Portable Terminal Devices

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
HRS

ST80-18S

USB Connector, 18 Contact(s), Male, Straight, Surface Mount Terminal, Locking, Receptacle

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
HRS

ST80-18S/4

Interface Connectors for Miniature, Portable Terminal Devices

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
HRS

ST80-24S

USB Connector, 24 Contact(s), Male, Straight, Surface Mount Terminal, Locking, Receptacle

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
HRS

ST8002-B1

8-Bit Microcontroller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC

ST8002-B6

8-Bit Microcontroller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC

ST8002-M1

8-Bit Microcontroller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC

ST8002-M6

8-Bit Microcontroller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC

ST8004

SMARTCARD INTERFACE

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
STMICROELECTR