STE2102 [STMICROELECTRONICS]
240x320RGB single-chip true 262K colors ramless LCD controller/driver; 240x320RGB单芯片真正的262K色ramless LCD控制器/驱动器型号: | STE2102 |
厂家: | ST |
描述: | 240x320RGB single-chip true 262K colors ramless LCD controller/driver |
文件: | 总4页 (文件大小:42K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
STE2102
240x320RGB single-chip true 262K colors
ramless LCD controller/driver
Data Brief
Features
Description
■ 240 x 320RGB display matrix
■ 8 colors & 262K colors modes
■ Programmable number of lines
The STE2102 is a low power CMOS single-chip
TFT controller/driver featuring an extremely low
current consumption thanks to an innovative
charge pump architecture. Designed to drive a
■ Programmable frame & N-line polarity
240 rows by 320RGB columns 262k colors
graphic display, with amplitude modulation
method, the STE2102 provides all the necessary
functions in a single chip, including on-chip gate
drivers supply, source drivers supply and source
reference voltages generators, resulting in a
minimum of externals components.
inversion
■ System interfaces (read and write)
– I2C
– 3-lines SPI
– 3-lines 9 bits Serial Interface
– 4-lines SPI
STE2102 features an high-speed RGB interface
to transfer flicker-free video data, an 8-bit YCrCb
digital video interface and several bi-directional
serial interfaces to configure the display.
■ Graphics interfaces:
– 16/18Bit RGB Interface
– 8Bit YCrCb 4:2:2 Interface
■ Programmable Gamma look-up tables for
The IC is designed to operate with both traditional
Cap-on-CE and with Cap-On-Gate panels.
optimum colour configuration.
■ Fully integrated Bias system and voltage
generator
■ Designed for chip-on-glass (COG) and
chip-on-foil (COF) applications
■ Logic supply voltage range from 1.5 to 1.95V
■ Interface and control signals supply voltage
range from 1.5 to 3.6V
■ High voltage generator supply voltage range
from 2.2 to 3.6V
■ Selectable scan direction
■ Common electrode and gate-off switching
■ Cap-on-common and cap-on-gate (patented)
TFT structures
■ Gate, common and source waveform timing
generation digitally tunable
■ Gate drivers voltage range from -15 to 16.5V
■ Source drivers voltage range from 0 to 5.5V
■ Common driver voltage range from -2.5 to 4.5V
■ On chip calibration (with OTP Cells) of Key
configuration parameters
December 2006
Rev 1
1/4
For further information contact your local STMicroelectronics sales office.
www.st.com
4
STE2102
Table 1.
Key features and benefits
Features
Benefits
High driving capability
Can drive panel sizes up to 4”
Suitable for several application
– portable multimedia
– digital still camera
– printers
320RGBx240, landscape type
– handheld instrumentation
Video interface
– parallel RGB
– YCC
Suitable for video streaming
Only ~6mA when driving 3.5” panel with natural
pictures
Low power circuitry
Requires few external components
On Chip DC/DC converter
Reduced number of system components
– Allows parameters setting for calibration and
tuning at module maker side
Integrated OTP (SmarT OTP)
– No need of external EEPROM
– SmarT OTP ensuring high programming yield
Specific features for production
– Bump misalignment
– Bump detachment
– Glass break
Allows module maker to control easily assembly
quality on production chain
Figure 1.
STE2102 functional block diagram
Gate drivers
VCOM driver
Source drivers
Timing
controller
Grey scale &
Gamma compensation
Digital core logic
Control
registers
OTP memory
Booster
Video interface
(RGB, YCC)
Control interface
(SPI, I2C)
2/4
STE2102
Ordering information
Ordering information
Table 2.
Order codes
Part number
Description
STE2102D3
Bumped Dice on Waffle Pack
Revision history
Table 3.
Date
20-Dec-2006
Document revision history
Revision
Changes
1
Initial release.
3/4
STE2102
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2006 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
4/4
相关型号:
©2020 ICPDF网 联系我们和版权申明