STEVAL-IHM023V2 [STMICROELECTRONICS]
1 kW 3-phase motor control demonstration board featuring L6390 drivers and STGP10NC60KD IGBT; 1千瓦的三相电机控制演示板具有L6390驱动程序和STGP10NC60KD IGBT
| 型号： | STEVAL-IHM023V2 |
| 厂家： | 
ST |
| 描述： | 1 kW 3-phase motor control demonstration board featuring L6390 drivers and STGP10NC60KD IGBT |
| 文件： | 总9页 (文件大小：509K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
STEVAL-IHM023V2
1 kW 3-phase motor control demonstration board featuring
L6390 drivers and STGP10NC60KD IGBT
Data brief
Features
■ Minimum input voltage: 125 VDC or 90 VAC
■ Maximum input voltage: 400 VDC or 285 VAC
■ Input voltage range with applied input voltage
doubler from 65 VAC to 145 VAC
■ Voltage range for low-voltage motor control
applications from 18 VDC to 35 VDC
■ Possibility to use auxiliary +15 V supply voltage
■ Maximum output power for motors up to 1 kW
■ Regenerative brake control
■ Input inrush limitation with bypass relay
STEVAL-IHM023V2
■ + 15 V auxiliary power supply based on buck
converter with VIPer™16
the STGP10NC60KD IGBT. The demonstration
board is an AC/DC inverter that generates a
three-phase waveform for driving three- or two-
phase motors such as induction motors or PMSM
motors up to 1000 W with or without sensors.
■ IGBT power switch STGP10NC60KD in a TO-
220 package - compatible with other ST IGBTs
or power MOSFETs in the TO-220 package
■ Fully populated board design with test points
and safety isolated plastic cover
The STEVAL-IHM023V2 is a universal, fully
evaluated and populated design consisting of a
three-phase inverter bridge based on
■ Motor control connector for interface with the
STM3210B-EVAL board and other ST motor
control dedicated kits
STMicroelectronics’ 600 V IGBT
STGP10NC60KD in a TO-220 package mounted
on a heatsink and the L6390 high-voltage high-
side and low-side driver featuring an integrated
comparator for hardware protection features such
as overcurrent and overtemperature.
■ Tachometer input
■ Hall/encoder inputs
■ Possibility to connect the BEMF daughterboard
for sensorless six-step control of BLDC motors
The driver also integrates an operational amplifier
suitable for advanced current sensing. Thanks to
this advanced characteristic, the system has been
specifically designed to achieve an accurate and
fast conditioning of the current feedback, thus
matching the typical requirements in field oriented
control (FOC).
■
PCB type and size:
– Material of PCB - FR-4
– Double-sided layout
– Copper thickness: 60 µm
– Total dimensions of demonstration board:
127 mm x 180 mm
The board has been designed to be compatible
with single-phase mains, supplying from 90 VAC
to 285 VAC or from 125 VDC to 400 VDC for DC
voltage. With reconfiguration of the input
sourcing, the board is suitable also for low-voltage
DC applications up to 35 VDC.
■ RoHS compliant
Description
The STEVAL-IHM023V2 demonstration board
implements a 1 kW three-phase motor control
featuring the L6390 high and low-side drivers and
September 2011
Doc ID 022260 Rev 1
1/9
For further information contact your local STMicroelectronics sales office.
www.st.com
9
Schematics
1
STEVAL-IHM023V2
Schematics
Figure 1.
STEVAL- IHM023V2 schematic - part 1
BAT48JFILM
BAT48JFILM
+
2/9
Doc ID 022260 Rev 1
STEVAL-IHM023V2
Figure 2. STEVAL- IHM023V2 schematic - part 2
Schematics
2
-
+
Drain1 1 Source
Drain2 2 Source
Drain3 3 Source
Drain4 4 Source
16
15
14
13
1
2
3
4
Doc ID 022260 Rev 1
3/9
Schematics
Figure 3.
STEVAL-IHM023V2
STEVAL- IHM023V2 schematic - part 3
4/9
Doc ID 022260 Rev 1
STEVAL-IHM023V2
Figure 4. STEVAL- IHM023V2 schematic - part 4
Schematics
BAT48JFILM D15
Doc ID 022260 Rev 1
5/9
Schematics
Figure 5.
STEVAL-IHM023V2
STEVAL- IHM023V2 schematic - part 5
BAT48JFILM
D19
6/9
Doc ID 022260 Rev 1
STEVAL-IHM023V2
Figure 6. STEVAL- IHM023V2 schematic - part 6
Schematics
BAT48JFILM D23
Doc ID 022260 Rev 1
7/9
Revision history
STEVAL-IHM023V2
2
Revision history
Table 1.
Date
26-Sep-2011
Document revision history
Revision
Changes
1
Initial release.
8/9
Doc ID 022260 Rev 1
STEVAL-IHM023V2
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2011 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Doc ID 022260 Rev 1
9/9
相关型号：
STEVAL-IHM024V1
100 W 3-phase inverter using the L6390 and STGDL6NC60DI for vector control
STMICROELECTR
STEVAL-IHM025V1
1 kW 3-phase motor control demonstration board featuring the IGBT SLLIMM⢠STGIPL14K60
STMICROELECTR
STEVAL-IHM027V1
Power board with MC connector based on the STGIPS10K60A 10 A, 600 V intelligent power module
STMICROELECTR
STEVAL-IHM029V1
2000 W universal motor control demonstration board based on the STM8S103F2 MCU and T1235H Triac
STMICROELECTR
STEVAL-IHM031V1
3-phase low voltage inverter power board for FOC and scalar motor control based on the STS8DNH3LL MOSFET
STMICROELECTR
STEVAL-IHM032V1
150 W inverter featuring the L639x and STGD3HF60HD for 1-shunt based sinusoidal vector control and trapezoidal scalar control
STMICROELECTR
STEVAL-IHM035V1
3-phase high voltage inverter power board for FOC and scalar motor control based on the STGIPN3H60 (SLLIMMâ¢-nano)
STMICROELECTR
STEVAL-IHM036V1
Low power motor control board featuring the SLLIMM⢠STGIPN3H60 and MCU STM32F100C6T6B
STMICROELECTR
STEVAL-IHP002V1
SmartPlug systems to measure and control AC loads, based on the STM32, ST7540 PLM, and STPM01
STMICROELECTR
STEVAL-IHP002V2
Smartplug system to measure and control AC loads based on the STM32, ST7540 PLM and STPM01
STMICROELECTR
STEVAL-IHP003V1
Remote-controlled PLM network module based on the ST7540 and STM32F103C8
STMICROELECTR
©2020 ICPDF网 联系我们和版权申明