STEVALIHM011V1 [STMICROELECTRONICS]
IGBT power module kit - SEMITOP2® power board; IGBT功率模块套件 - SEMITOP2®电源板型号: | STEVALIHM011V1 |
厂家: | ST |
描述: | IGBT power module kit - SEMITOP2® power board |
文件: | 总5页 (文件大小:251K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
STEVAL-IHM011V1
IGBT power module kit - SEMITOP2® power board
Data Brief
Features
■ 34-pin dedicated motor control connector
■ 5-pins hall sensor/encoder input
■ Tachometer sensor input
■ Support for 5 V or 3.3 V microcontroller
■ Three configurations for current detection:
– 1 shunt resistor
– 3 shunt resistors or
– 3 external ICS (insulated current sensor)
■ Current amplification network
■ BEMF detecting network
■ Hardware current protection
■ Hardware thermal protection (using on-board
STEVAL-IHM011V1
temperature sensor)
■ Resistive brake network
Description
The STEVAL-IHM011V1 evaluation board is a
complete platform for evaluating the
STMicroelectronics power module SEMITOP2
®
devices. Based on a cost-effective, flexible and
open design, it is an evaluation platform which is
compatible with the latest STMicroelectronics
microcontroller-based solution. It includes the
10A, 600 V STG3P2M10N60B IGBT power
module (see note 1). This evaluation board has a
motor control connector (mc-connector) and
hardware features for developing motor control
applications. It also includes hardware protection
features such as current and thermal protection.
Note:
1
The kit has been designed and tested to work with European mains (maximum 380 V
)
DC
March 2008
Rev 1
1/5
For further information contact your local STMicroelectronics sales office.
www.st.com
5
Board schematic
STEVAL-IHM011V1
1
Board schematic
Figure 1.
Schematic 1/2
3
1
3
1
3
1
1 4
7
1 4
7
1 4
7
2
3
2
1
2
1
2
E N C O D E R
H A L L S E N S O 1 R
3
M O E H T E R T A C
1
3
1
3
1 4
7
2
1
2
1
2
1
3
1 2
4
1 1
3
1
2
w
V . P 3 o + 3
2/5
STEVAL-IHM011V1
Figure 2.
Board schematic
Schematic 1/2
i t t e m r E C L
1 4
1 5
G a t e C L
G a t e C H
8
7
5
B r e L t i t E m
1 3
1 2
1
3
5
7
9
2
4
6
8
L
H
G a t e
G a t e
B
B
1 0
A r e L t i t E m
1 1
1 0
3
1
L
H
G a t e
G a t e
A
A
1
1
3
1
3
1
3
3
1
1
3
2
1
8
4
2
2
1
2
1
2
1
2
1
2
2
5
6
7
8
2
1
2
1
4
G N D
1
2
1
2
1
2
1
3/5
Revision history
STEVAL-IHM011V1
2
Revision history
Table 1.
Date
03-Mar-2008
Document revision history
Revision
Changes
1
Initial release.
4/5
STEVAL-IHM011V1
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2008 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
5/5
相关型号:
©2020 ICPDF网 联系我们和版权申明