STM6779YBWB6E
更新时间:2024-09-19 01:05:56
描述:1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO6, ROHS COMPLIANT, MO-178CAB, SOT-23, 6 PIN
STM6779YBWB6E 概述
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO6, ROHS COMPLIANT, MO-178CAB, SOT-23, 6 PIN
STM6779YBWB6E 数据手册
通过下载STM6779YBWB6E数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载STM6717/6718/6719/6720
STM6777/6778/6779/6780
Dual/triple ultra-low voltage supervisors
with push-button reset (with delay option)
Features
■ Primary supply (V
) monitor.
CC1
Fixed (factory-programmed) reset thresholds:
4.63 V to 1.58 V
■ Secondary supply (V
) monitor
CC2
(STM6717/18/19/20/77/78)
■ Fixed (factory-programmed) reset thresholds:
3.08 V to 0.79 V
■ Tertiary supply monitor (using externally
SOT23-5 (WY)
adjustable RSTIN): 0.626 V internal reference
■ RST outputs (push-pull or open drain); state
guaranteed if V
or V
≥ 0.8 V
CC1
CC2
■ Reset delay time (t ) on power-up: 13.2 ms,
rec
210 ms, 900 ms (typ)
■ Manual reset input (MR)
■ Optional delayed manual reset input (MRC)
with external capacitor (STM6777/78/79/80)
SOT23-6 (WB)
■ Low supply current - 11 µA (typ),
V
= V
= 3.6 V
CC1
CC2
■ Operating temperature: –40 °C to 85 °C
(industrial grade)
Table 1.
Device summary
Monitored voltages
Reset output (RST)
Part
Manual reset DelayedMR
Package
Active-low
(push-pull) (open drain)
Active-low
number
input (MR)
pin (MRC)
VCC1
VCC2
RSTIN
STM6717
STM6718
STM6719
STM6720
STM6777
STM6778
STM6779
STM6780
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
WY
WY
WB
WB
WB
WB
WB
WB
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
August 2011
Doc ID 11469 Rev 8
1/30
www.st.com
1
Contents
STM6717/6718/6719/6720/STM6777/6778/6779/6780
Contents
1
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.1
Pin descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.1.1
1.1.2
1.1.3
1.1.4
1.1.5
1.1.6
1.1.7
Active-low, push-pull reset output (RST) - STM6718/20/78/80 . . . . . . . . 7
Active-low, open drain reset output (RST) - STM6717/19/77/79 . . . . . . . 7
Push-button reset input (MR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Manual reset delay input (MRC) - STM6777/78/79/80) . . . . . . . . . . . . . . 8
Primary supply voltage monitoring input (V
) . . . . . . . . . . . . . . . . . . . 8
CC1
Secondary supply voltage monitoring input (V
) . . . . . . . . . . . . . . . . . 8
CC2
Adjustable reset comparator input (RSTIN; STM6719/20/79/80) . . . . . . 8
2
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.1
Applications information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3
4
5
6
7
8
Typical operating characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Maximum rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
DC and AC parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Part numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
2/30
Doc ID 11469 Rev 8
STM6717/6718/6719/6720/STM6777/6778/6779/6780
List of tables
List of tables
Table 1.
Table 2.
Table 3.
Table 4.
Table 5.
Table 6.
Table 7.
Table 8.
Table 9.
Table 10.
Table 11.
Table 12.
Table 13.
Device summary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Signal names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Pin functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Operating and AC measurement conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
DC and AC characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
t
minimum pulse width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
MLMH
SOT23-5 – 5-lead small outline transistor package mechanical data. . . . . . . . . . . . . . . . . 23
SOT23-6 – 6-lead small outline transistor package mechanical data. . . . . . . . . . . . . . . . . 24
Carrier tape dimensions for SOT23-5L and SOT23-6L . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Ordering information scheme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Marking description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Document revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Doc ID 11469 Rev 8
3/30
List of figures
STM6717/6718/6719/6720/STM6777/6778/6779/6780
List of figures
Figure 1.
Figure 2.
Figure 3.
Figure 4.
Figure 5.
Figure 6.
Figure 7.
Figure 8.
Figure 9.
Logic diagram (STM6717/18) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Logic diagram (STM6777/78) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Logic diagram (STM6719/20) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Logic diagram (STM6779/80) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
STM6717/18 SOT23-5 connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
STM6777/78 SOT23-6 connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
STM6719/20 SOT23-6 connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
STM6779/80 SOT23-6 connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Figure 10. Hardware hookup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Figure 11. STM67xx interface to processor with bi-directional reset pins . . . . . . . . . . . . . . . . . . . . . . 10
Figure 12. Ensuring RST valid to V = 0 (active-low, push-pull outputs). . . . . . . . . . . . . . . . . . . . . . 10
CC
Figure 13. Supply current vs. temperature (V
Figure 14. Supply current vs. temperature (V
Figure 15. Supply current vs. temperature (V
Figure 16. Supply current vs. temperature (V
= 5.5 V; V
= 3.6 V; V
= 3.0 V; V
= 2.0 V; V
= 3.6 V) . . . . . . . . . . . . . . . . . . . . . . 11
= 2.75 V) . . . . . . . . . . . . . . . . . . . . . 11
= 2.0 V) . . . . . . . . . . . . . . . . . . . . . . 12
= 1.0 V) . . . . . . . . . . . . . . . . . . . . . . 12
CC1
CC1
CC1
CC1
CC2
CC2
CC2
CC2
Figure 17. Normalized V reset time-out period vs. temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
CC
Figure 18. Maximum V transient duration vs. reset threshold overdrive . . . . . . . . . . . . . . . . . . . . . 13
CC
Figure 19. Normalized V
Figure 20. Normalized V
threshold vs. temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
threshold vs. temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
RST1
RST2
Figure 21. Reset input threshold vs. temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Figure 22. -to-reset delay vs. temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Figure 23. Reset input-to-reset output delay vs. temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Figure 24. MR-to-reset output delay vs. temperature (V = 3.6V) . . . . . . . . . . . . . . . . . . . . . . . . . . 16
V
CC1
CC1
Figure 25. AC testing input/output waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Figure 26. MR timing waveform (STM6717/18/19/20) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Figure 27. MR timing waveform (STM6777/78/79/80) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Figure 28. SOT23-5 – 5-lead small outline transistor package mechanical drawing . . . . . . . . . . . . . . 23
Figure 29. SOT23-6 – 6-lead small outline transistor package mechanical drawing . . . . . . . . . . . . . . 24
Figure 30. Carrier tape for SOT23-5L and SOT23-6L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
4/30
Doc ID 11469 Rev 8
STM6717/6718/6719/6720/STM6777/6778/6779/6780
Description
1
Description
The STM6717/18/19/20 and STM6777/78/79/80 supervisors are a family of low-voltage/low-
supply current processor (micro or DSP) supervisors, designed to monitor two (or three)
system power supply voltages. They are targeted at applications such as set-top boxes
(STBs), portable, battery-powered systems, networking, and communication systems.
All device options have a push-button-type manual reset input (MR). The
STM6777/78/79/80 also includes an option which enables the user to delay the start of the
manual reset process from 6 µs (MRC pin left open) or more with external capacitor. The
delay is implemented by connecting the appropriately sized capacitor between the MRC pin
and V (typical 4 s delay with a 3.3 µF capacitor, see Table 7 on page 21).
SS
Two of the three supplies monitored (V
and V
) have fixed (customer-selectable,
CC2
CC1
factory-trimmed) thresholds (V
and V
). The third voltage is monitored using an
RST1
RST2
externally adjustable RSTIN threshold (0.626 V internal reference).
If any of the three monitored voltages drop below its factory-trimmed or adjustable
thresholds, or if MR is asserted to logic low, a RST is asserted (driven low). Once asserted,
RST is maintained at low for a minimum delay period (t ) after ALL supplies rise above
rec
their respective thresholds and MR returns to high. These devices are guaranteed to be in
the correct reset output logic state when V
and/or V
is greater than 0.8 V.
CC1
CC2
These devices are available in standard 5-pin or 6-pin SOT23 packages (see Table 1 on
page 1).
Doc ID 11469 Rev 8
5/30
Description
Figure 1.
STM6717/6718/6719/6720/STM6777/6778/6779/6780
Logic diagram (STM6717/18)
Figure 2.
Logic diagram (STM6777/78)
V
V
V
V
CC2
CC1
CC2 CC1
MRC
MR
STM6717
STM6718
STM6777
STM6778
MR
RST
RST
V
V
SS
SS
AI10413
AI10415
Figure 3.
Logic diagram (STM6719/20)
Figure 4.
Logic diagram (STM6779/80)
V
V
V
CC1
CC
CC2
RSTIN
MRC
RSTIN
MR
STM6779
STM6780
STM6719
STM6720
RST
RST
MR
V
V
SS
SS
AI10416
AI10414
Table 2.
Signal names
MR
Push-button reset input
Manual reset delay input
Active-low reset output
Primary supply voltage input
MRC
RST
VCC1
VCC2
RSTIN
VSS
Secondary supply voltage input
Adjustable reset comparator input
Ground
6/30
Doc ID 11469 Rev 8
STM6717/6718/6719/6720/STM6777/6778/6779/6780
Description
Figure 5.
STM6717/18 SOT23-5 connections Figure 6.
STM6777/78 SOT23-6 connections
V
6
5
4
1
2
3
CC1
RST
V
V
5
4
1
2
3
CC1
RST
V
SS
MRC
V
SS
V
MR
CC2
MR
CC2
AI10417
AI10418
Figure 7.
STM6719/20 SOT23-6 connections Figure 8.
STM6779/80 SOT23-6 connections
V
V
CC1
6
5
4
6
5
4
1
2
3
CC1
1
2
3
RST
RST
V
V
SS
RSTIN
SS
RSTIN
MRC
V
MR
MR
CC2
AI10419
AI10420
1.1
Pin descriptions
1.1.1
Active-low, push-pull reset output (RST) - STM6718/20/78/80
The RST pin is driven low and stays low whenever V
or V
or RSTIN falls below its
CC2
CC1
factory-trimmed or adjustable reset threshold or when MR goes to logic low. It remains low
for t after ALL supply voltages being monitored rise above their reset thresholds and MR
rec
goes from low to high. (Push-pull outputs are referenced to V
.)
CC1
1.1.2
1.1.3
Active-low, open drain reset output (RST) - STM6717/19/77/79
The RST pin is driven low and stays low whenever V
or V
or RSTIN falls below its
CC2
CC1
factory-trimmed or adjustable reset threshold or when MR goes to logic low. It remains low
for t after ALL supply voltages being monitored rise above their reset thresholds and MR
rec
goes from low to high. Connect an external pull-up resistor to V
should be sufficient for most applications.
. A 10 kΩ pull-up resistor
CC1
Push-button reset input (MR)
When MR goes low the RST output is driven low. RST remains low as long as MR is low and
for t after MR returns to high. This active-low input has an internal 50 kΩ pull-up resistor to
rec
Doc ID 11469 Rev 8
7/30
Description
STM6717/6718/6719/6720/STM6777/6778/6779/6780
V
. It can be driven from a TTL or CMOS logic line, or with open drain/collector outputs,
CC1
or connected to V through a switch. If unused, leave this pin open or connect it to V
.
SS
CC1
Connect a normally open momentary switch from MR to V ; external debounce circuitry is
SS
not required. (If MR is driven from long cables or if the device is used in noisy environments,
connecting a 0.1µF capacitor from MR to V provides additional noise immunity.
SS
1.1.4
Manual reset delay input (MRC) - STM6777/78/79/80)
This pin is either left open or connected to V via a capacitor. By selecting the appropriate
SS
capacitor, the manual reset process, initiated by pressing the push-button manual reset
input, can be delayed by any value from 6 µs or more (see Table 7 on page 21).
1.1.5
1.1.6
1.1.7
Primary supply voltage monitoring input (V
)
CC1
It also is the input for the primary reset threshold monitor. Available fixed (customer-
selectable, factory-programmed) reset thresholds include 4.63 V to 1.58 V.
Secondary supply voltage monitoring input (V
)
CC2
This function is available on the STM6717/18/19/20/77/78. Fixed (customer-selectable,
factory-programmed) reset thresholds include 3.08 V to 0.79 V.
Adjustable reset comparator input (RSTIN; STM6719/20/79/80)
This is a high impedance input. RST is driven low when the voltage at the RSTIN pin falls
below 0.626 V (internal reference voltage at this comparator). The monitored voltage reset
threshold is set with an external resistor-divider network.
Table 3.
Pin functions
Pin
Name
Function
STM6717 STM6719 STM6777 STM6779
STM6718 STM6720 STM6778 STM6780
1
3
1
3
1
3
1
3
RST Active-low reset output
MR Push-button reset input
MRC Manual reset delay input
VCC1 Primary supply voltage input
VCC2 Secondary supply voltage input
RSTIN Adjustable reset comparator input
VSS Ground
—
5
—
6
5
4
6
6
4
4
4
—
5
—
2
5
—
2
2
2
8/30
Doc ID 11469 Rev 8
STM6717/6718/6719/6720/STM6777/6778/6779/6780
Description
Figure 9.
Block diagram
V
CC1
COMPARE
COMPARE
COMPARE
V
V
RST1
RST2
(1)
V
CC2
(2)
RSTIN
t
rec
RST
V
= 0.626
REF/2
Generator
V
CC1
MR
(3)
Logic
MRC
AI10421
1. VCC2 input is available on STM6717/18/19/20/77/78.
2. RSTIN available only on STM6719/20/79/80.
3. MRC available only on STM6777/78/79/80.
Figure 10. Hardware hookup
From DC/DC Converter
(1)
V
V
CC2
CC1
V
V
CC1
R1 + R2
R2
V
=
(626.5mV)
CC3
(
)
0.1µF
STM67xx
CC2
V
CC3
0.1µF
R1
(2)
RSTIN
MR
RST
RST (To Processor Reset)
R2
(3)
MRC
Push-button
Switch
V
SS
C
AI10422
1. VCC2 is available only on STM6717/18/19/20/77/78.
2. RSTIN available only on STM6719/20/79/80.
3. MRC available only on STM6777/78/79/80.
Doc ID 11469 Rev 8
9/30
Operation
STM6717/6718/6719/6720/STM6777/6778/6779/6780
2
Operation
2.1
Applications information
1. Interfacing to processors with bi-directional reset pins
Most processors with bi-directional reset pins can interface directly to the open drain
RST outputs (STM6717/19/77/79). Systems simultaneously requiring a push-pull RST
output and a bi-directional reset interface can be in logic contention. To prevent this
contention, connect a 4.7 kΩ resistor between RST and the processor’s reset I/O as
shown in Figure 11.
2. Ensuring a valid RST output down to V = 0 V
CC
The STM67xx supervisors are guaranteed to be in the correct RST output logic state
when V
and/or V
is greater than 0.8 V. In applications which require valid reset
CC1
CC2
levels down to V = 0, a pull-down resistor to active-low outputs (push-pull only, see
CC
Figure 12) will ensure that the reset line is valid while the reset output can no longer
sink or source current. This scheme does NOT work with the open drain outputs of the
STM6717/19/77/79.
The resistor value used is not critical, but it must be large enough not to load the reset
output when V is above the reset threshold. For most applications, 100 kΩ is
CC
adequate.
Figure 11. STM67xx interface to processor with bi-directional reset pins
V
V
CC2
CC1
STM67xx
Processor
To other
system
components
V
V
CC1
CC2
RST
RESET
4.7kΩ
V
V
SS
SS
AI10425
Figure 12. Ensuring RST valid to V = 0 (active-low, push-pull outputs)
CC
STM67xx
V
CC1
V
CC1
RST
V
SS
R1
AI10426
10/30
Doc ID 11469 Rev 8
STM6717/6718/6719/6720/STM6777/6778/6779/6780
Typical operating characteristics
3
Typical operating characteristics
Note:
Typical values are at T = 25 °C unless otherwise noted.
A
Figure 13. Supply current vs. temperature (V
= 5.5 V; V
= 3.6 V)
CC2
CC1
18
16
14
12
I
TOTAL
10
I
CC1
8
6
4
I
CC2
2
0
–40
–20
0
20
40
60
80
Temperature (°C)
AI11843
Figure 14. Supply current vs. temperature (V
= 3.6 V; V
= 2.75 V)
CC2
CC1
18
16
14
12
10
8
I
TOTAL
I
CC1
6
4
I
CC2
2
0
–40
–20
0
20
40
60
80
Temperature (°C)
AI11844
Doc ID 11469 Rev 8
11/30
Typical operating characteristics
STM6717/6718/6719/6720/STM6777/6778/6779/6780
Figure 15. Supply current vs. temperature (V
= 3.0 V; V
= 2.0 V)
CC2
CC1
18
16
14
12
10
8
I
TOTAL
6
I
CC1
4
2
I
CC2
20
0
–40
–20
0
40
60
80
Temperature (°C)
AI11845
Figure 16. Supply current vs. temperature (V
= 2.0 V; V
= 1.0 V)
CC2
CC1
18
16
14
12
10
8
I
TOTAL
6
I
CC1
4
2
I
CC2
0
–40
–20
0
20
40
60
80
Temperature (°C)
AI11846
12/30
Doc ID 11469 Rev 8
STM6717/6718/6719/6720/STM6777/6778/6779/6780
Typical operating characteristics
Figure 17. Normalized V reset time-out period vs. temperature
CC
1.07
1.05
1.03
1.01
0.99
0.97
–40
–20
0
20
40
60
80
Temperature (°C)
AI11847
Figure 18. Maximum V transient duration vs. reset threshold overdrive
CC
1000
100
10
1
1
10
100
1000
Reset threshold overdrive (mV)
AI11848
Doc ID 11469 Rev 8
13/30
Typical operating characteristics
STM6717/6718/6719/6720/STM6777/6778/6779/6780
threshold vs. temperature
Figure 19. Normalized V
RST1
1.004
1.002
1.000
0.998
0.996
–40
–20
0
20
40
60
80
Temperature (°C)
AI11849
Figure 20. Normalized V
threshold vs. temperature
RST2
1.004
1.002
1.000
0.998
0.996
–40
–20
0
20
40
60
80
Temperature (°C)
AI11850
14/30
Doc ID 11469 Rev 8
STM6717/6718/6719/6720/STM6777/6778/6779/6780
Typical operating characteristics
Figure 21. Reset input threshold vs. temperature
630
629
628
627
626
625
624
–40
–20
0
20
40
60
80
Temperature (°C)
AI11851
Figure 22. V
-to-reset delay vs. temperature
CC1
48
44
40
36
32
28
–40
–20
0
20
40
60
80
Temperature (°C)
AI11852
Doc ID 11469 Rev 8
15/30
Typical operating characteristics
STM6717/6718/6719/6720/STM6777/6778/6779/6780
Figure 23. Reset input-to-reset output delay vs. temperature
29.0
28.5
28.0
27.5
27.0
26.5
26.0
25.5
25.0
–40
–20
0
20
40
60
80
Temperature (°C)
AI11853
Figure 24. MR-to-reset output delay vs. temperature (V
= 3.6V)
CC1
500
480
460
440
420
400
–40
–20
0
20
40
60
80
Temperature (°C)
AI11854
16/30
Doc ID 11469 Rev 8
STM6717/6718/6719/6720/STM6777/6778/6779/6780
Maximum rating
4
Maximum rating
Stressing the device above the rating listed in the Absolute Maximum Ratings” table may
cause permanent damage to the device. These are stress ratings only and operation of the
device at these or any other conditions above those indicated in the Operating sections of
this specification is not implied. Exposure to Absolute Maximum Rating conditions for
extended periods may affect device reliability. Refer also to the STMicroelectronics SURE
Program and other relevant quality documents.
Table 4.
Symbol
TSTG
Absolute maximum ratings
Parameter
Value
Unit
Storage temperature (VCC off)
–55 to 150
°C
°C
V
(1)
TSLD
Lead solder temperature for 10 seconds
260
–0.3 to VCC1 + 0.3
–0.3 to VCC2 + 0.3
–0.3 to 7.0
20
VIO
Input or output voltage
V
VCC1, VCC2 Supply voltage
V
IIO
Input or output current (all pins)
mA
mW
mW
SOT23-5
SOT23-6
654
PD
Power dissipation
675
1. Reflow at peak temperature of 260 °C. The time above 255 °C must not exceed 30 seconds.
Doc ID 11469 Rev 8
17/30
DC and AC parameters
STM6717/6718/6719/6720/STM6777/6778/6779/6780
5
DC and AC parameters
This section summarizes the operating measurement conditions, and the DC and AC
characteristics of the device. The parameters in the DC and AC characteristics tables that
follow, are derived from tests performed under the measurement conditions summarized in
Table 5: Operating and AC measurement conditions. Designers should check that the
operating conditions in their circuit match the operating conditions when relying on the
quoted parameters.
Table 5.
Operating and AC measurement conditions
Parameter STM67xx
Unit
V
CC supply voltage
0.8 to 5.5
–40 to 85
≤ 5
V
°C
ns
V
Ambient operating temperature (TA)
Input rise and fall times
Input pulse voltages
0.2 to 0.8VCC
0.3 to 0.7VCC
Input and output timing ref. voltages
V
Figure 25. AC testing input/output waveforms
0.8V
CC
0.7V
CC
0.3V
CC
0.2V
CC
AI02568
Figure 26. MR timing waveform (STM6717/18/19/20)
tMLMH
MR
tMLRL
RST
trec
AI10423a
Figure 27. MR timing waveform (STM6777/78/79/80)
(1)
tMLMH
MR
tMLRL
RST
t
rec
AI10424c
1. By connecting a certain capacitor between the MRC pin and VSS, the RST can be delayed from 6 µs or
more (tMLMH, see Table 7 on page 21).
18/30
Doc ID 11469 Rev 8
STM6717/6718/6719/6720/STM6777/6778/6779/6780
DC and AC parameters
Table 6.
Sym
DC and AC characteristics
Alter-
native
Description
Test condition(1)
Min
Typ
Max
Unit
VCC
ICC1
Operating voltage
VCC1 supply current
0.8
5.5
35
23
9
V
V
V
V
CC1 < 5.5 V, all I/O pins open
CC1 < 3.6 V, all I/O pins open
CC2 < 3.6 V, all I/O pins open
12
8
µA
µA
µA
µA
µA
3
ICC2
VCC2 supply current
Input leakage current
VCC2 < 2.75 V, all I/O pins open
0 V = VIN = VCC
2.5
7
(2)
ILI
–1
+1
VCC1 > VRST1, VCC2 > VRST2
RST not asserted
;
Open drain RST output
leakage current
ILO
0.5
0.3
0.3
0.3
0.3
0.4
µA
V
VCC1 or VCC2 ≥ 0.8 V,
ISINK = 1 µA, RST asserted
VCC1 or VCC2 ≥ 1.0 V,
V
ISINK = 50 µA, RST asserted
VCC1 or VCC2 ≥ 1.2 V,
ISINK = 100 µA, RST asserted
Output low voltage (RST;
push-pull or open drain)
VOL
V
VCC1 or VCC2 ≥ 2.7 V,
ISINK = 1.2 mA, RST asserted
V
VCC1 or VCC2 ≥ 4.5 V,
ISINK = 3.2 mA, RST asserted
V
V
V
V
VCC1 ≥ 1.8 V, ISOURCE = 200 µA,
0.8VCC1
0.8VCC1
0.8VCC1
RST not asserted
Output high voltage (RST; VCC1 ≥ 2.7 V, ISOURCE = 500 µA,
VOH
push-pull only)
RST not asserted
VCC1 ≥ 4.5 V, ISOURCE = 800 µA,
RST not asserted
Rise time measured from 10% to
Push-pull RST rise time
(STM6718/20/78/80)
(3)
90% of VCC
;
tR
5
25
ns
CL = 5 pF, VCC = 3.3 V
Reset thresholds
L (falling)
M (falling)
T (falling)
S (falling)
R (falling)
Z (falling)
Y (falling)
W (falling)
V (falling)
4.500 4.625 4.750
4.250 4.375 4.500
3.000 3.075 3.150
2.850 2.925 3.000
2.550 2.625 2.700
2.250 2.313 2.375
2.125 2.188 2.250
1.620 1.665 1.710
1.530 1.575 1.620
V
V
V
V
V
V
V
V
V
(4)
VRST
VTH1
VCC1 reset threshold
Doc ID 11469 Rev 8
19/30
DC and AC parameters
STM6717/6718/6719/6720/STM6777/6778/6779/6780
Table 6.
Sym
DC and AC characteristics (continued)
Alter-
Description
Test condition(1)
Min
Typ
Max
Unit
native
T (falling)
S (falling)
3.000 3.075 3.150
2.850 2.925 3.000
2.550 2.625 2.700
2.250 2.313 2.375
2.125 2.188 2.250
1.620 1.665 1.710
1.530 1.575 1.620
1.350 1.388 1.425
1.275 1.313 1.350
1.080 1.110 1.140
1.020 1.050 1.080
0.895 0.925 0.955
0.845 0.875 0.905
0.810 0.833 0.855
0.765 0.788 0.810
0.5
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
%
R (falling)
Z (falling)
Y (falling)
W (falling)
V (falling)
(4)
VRST2
VTH2
VCC2 reset threshold
I (falling)
H (falling)
G (falling)
F (falling)
K (falling)
J (falling)
E (falling)
D (falling)
VHYST
Reset threshold hysteresis
VCC to RST delay
Referenced to VRST typical
VCC1 = (VRST1 + 100 mV) to
(VRST – 100 mV)
20
20
µs
µs
tRD
VCC2 = (VRST2 + 75 mV) to
(VRST2 – 75 mV)
blank
B
140
8.8
210
13.2
900
280
17.6
1200
trec
tRP
RST pulse width
ms
G
600
Adjustable reset comparator input (STM6719/20/79/80)
VRSTIN
IRSTIN
RSTIN input threshold
RSTIN input current
RSTIN hysteresis
611
–25
626.5 642
mV
nA
+25
3
mV
RSTIN to RST
output delay
tRSTIND
VRSTIN to (VRSTIN – 30 mV)
22
µs
20/30
Doc ID 11469 Rev 8
STM6717/6718/6719/6720/STM6777/6778/6779/6780
DC and AC parameters
Table 6.
Sym
DC and AC characteristics (continued)
Alter-
native
Description
Test condition(1)
Min
Typ
Max
Unit
Manual (push-button) reset input
0.3VC
VIL
V
V
C1
MR input voltage
VIH
0.7VCC1
1
MR minimum pulse width
(STM6717/18/19/20)
µs
tMLMH
tMR
MRC connected via
capacitor to VSS
MR minimum pulse width
(STM6777/78/79/80)
6
µs
ns
ns
kΩ
tMLRL
tMRD
MR to RST output delay
200
100
50
MR glitch immunity
(STM6717/18/19/20)
MR pull-up resistance
25
80
1. Valid for ambient operating temperature: TA = –40 to 85 °C; VCC1 = 0.8 to 5.5 V and VCC2 = 0.8 to 3.6 V (except where
noted).
2. Input leakage for the MRC pin is not tested.
3. Guaranteed by design.
4. The leakage current measured on the RST pin is tested with the reset de-asserted (output high impedance).
Table 7.
VCC1
t
minimum pulse width
MLMH
Capacitor value(1)
100 pF
0.1 µF
2.2 µF
2.6 s
3.3 µF
4.0 s
4.7 µF
6.8 µF
1.6 V
2.0 V
3.0 V
4.0 V
5.0 V
120 µs
122 µs
125 µs
128 µs
130 µs
120 ms
122 ms
125 ms
129 ms
130 ms
5.6 s
5.8 s
5.9 s
6.0 s
6.1 s
8.2 s
8.3 s
8.5 s
8.7 s
8.8 s
2.7 s
2.7 s
2.8 s
2.8 s
4.0 s
4.1 s
4.2 s
4.3 s
1. At 25 °C (typical)
Doc ID 11469 Rev 8
21/30
Package mechanical data
STM6717/6718/6719/6720/STM6777/6778/6779/6780
6
Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
®
®
ECOPACK packages, depending on their level of environmental compliance. ECOPACK
specifications, grade definitions and product status are available at: www.st.com.
®
ECOPACK is an ST trademark.
22/30
Doc ID 11469 Rev 8
STM6717/6718/6719/6720/STM6777/6778/6779/6780
Package mechanical data
Figure 28. SOT23-5 – 5-lead small outline transistor package mechanical drawing
E
A1
1
e
e1
D
5x b
5x
M
0.20
C A B
A2
A
C 0.10
A
C
Datum A
0.20
C
θ
B
L
E1
0133778
Note:
Drawing is not to scale.
Table 8.
Symb
SOT23-5 – 5-lead small outline transistor package mechanical data
mm
Typ
inches
Typ
Min
Max
Min
Max
A
A1
A2
b
—
—
—
—
1.45
0.15
1.30
0.50
0.22
—
—
—
—
—
0.057
0.006
0.051
0.020
0.009
—
0.90
0.30
0.08
—
1.15
—
0.035
0.012
0.003
—
0.045
—
C
—
—
D
2.90
2.80
1.60
0.95
1.90
0.45
4°
0.114
0.110
0.063
0.037
0.075
0.018
4°
E
—
—
—
—
E1
e
—
—
—
—
—
—
—
—
e1
L
—
—
—
—
0.30
0°
0.60
8°
0.012
0°
0.024
8°
Q
N
5
5
Note:
Dimensions per JEDEC SOT/SOP product outline MO-178C, variation AA
Doc ID 11469 Rev 8
23/30
Package mechanical data
STM6717/6718/6719/6720/STM6777/6778/6779/6780
Figure 29. SOT23-6 – 6-lead small outline transistor package mechanical drawing
E
A1
1
e
e1
D
6x b
0.10
6x
M
C A B
C 0.10
A2
A
C
A
Datum A
0.20
C
θ
B
L
E1
7049714
Note:
Drawing is not to scale.
Table 9.
Symb
SOT23-6 – 6-lead small outline transistor package mechanical data
mm
Typ
inches
Typ
Min
Max
Min
Max
A
A1
A2
b
—
—
—
—
1.45
0.15
1.30
0.50
0.22
—
—
—
—
—
0.057
0.006
0.051
0.020
0.009
—
0.90
0.30
0.08
—
1.15
—
0.035
0.012
0.003
—
0.045
—
C
—
—
D
2.90
2.80
1.60
0.95
1.90
0.45
4°
0.114
0.110
0.063
0.037
0.075
0.018
4°
E
—
—
—
—
E1
e
—
—
—
—
—
—
—
—
e1
L
—
—
—
—
0.30
0°
0.60
8°
0.012
0°
0.024
8°
Q
N
6
6
Note:
Dimensions per JEDEC SOT/SOP product outline MO-178C variation AB
24/30
Doc ID 11469 Rev 8
STM6717/6718/6719/6720/STM6777/6778/6779/6780
Figure 30. Carrier tape for SOT23-5L and SOT23-6L
Package mechanical data
P
0
E
P
D
2
T
A
0
F
TOP COVER
TAPE
W
B
0
P
1
CENTER LINES
OF CAVITY
K
0
USER DIRECTION OF FEED
AM03073v1
Note:
Part pin 1 indicator is on bottom left for shipping method “F” and is on top right for shipping
method “R” see Section 7.
Table 10. Carrier tape dimensions for SOT23-5L and SOT23-6L
Bulk
Qty
Package
W
D
E
P0
P2
F
A0
B0
K0
P1
T
Unit
8.00
+0.30/ +0.10/
–0.10 –0.00
1.50
SOT23-5
SOT23-6
1.75
0.10
4.00
0.10
2.00
0.10
3.50
0.05
3.23
0.10
3.17
0.10
1.37
0.10
4.00 0.254
0.10 0.013
mm 3000
Doc ID 11469 Rev 8
25/30
Part numbering
STM6717/6718/6719/6720/STM6777/6778/6779/6780
7
Part numbering
Table 11. Ordering information scheme
Example:
STM67xx
LT
WY
6
F
Device type
STM67xx
Reset thresholds (VRST1 and VRST2) for VCC1 and VCC2
STM6717/18/19/20/77/78 (VRST1 and VRST2
)
STM6779/80 (VRST1 only)
Suffix
LT
MS
VRST1
4.625
4.375
4.375
3.075
3.075
3.075
3.075
3.075
3.075
2.925
2.925
2.925
2.925
2.925
2.925
2.188
2.188
2.188
2.188
2.188
1.575
1.575
1.575
1.575
VRST2
3.075
2.925
2.625
2.313
1.665
1.388
1.110
0.925
0.833
2.188
1.575
1.313
1.050
0.875
0.788
1.575
1.313
1.050
0.875
0.788
1.313
1.050
0.875
0.788
Suffix VRST1
L–(1)
T–(1)
S–(1)
Y–(1)
V–(1)
R–
4.625
3.075
2.925
2.188
1.575
2.625
2.313
MR
TZ(1)
TW(1)
TI
TG(1)
TK
Z–
TE
SY(1)
SV(1)
SH(2)
SF(1)
SJ(3)
SD(3)
YV
YH
YF
YJ
YD
VH
VF
VJ
VD
Reset pulse width
blank: trec = 140 ms to 280 ms
B: trec = 8.8 ms to 17.6 ms
G: trec = 600 ms to 1200 ms
Package
WY = SOT23-5
WB = SOT23-6
Temperature range
6 = –40 to 85°C
Shipping method
E = ECOPACK® package, tubes
F = ECOPACK® package, tape and reel
R
(4) = ECOPACK® package, tape and reel (pin 1 at top right).
1.
T
hese are standard versions and are typically held in stock. A non-standard version may require a higher minimum volumes, and/or longer
delivery times. For other options, or for more information on any aspect of this device, please contact the ST sales office nearest you.
2. Available in STM6719 version only.
3. Available in STM6717 version only.
4. Available for STM6720SY, STM6719SF and STM6719SFB versions only.
26/30
Doc ID 11469 Rev 8
STM6717/6718/6719/6720/STM6777/6778/6779/6780
Table 12. Marking description
Part numbering
Part number
VRST1 threshold (V) VRST2 threshold (V)
Topside marking
Bottomside marking
STM6717SD
STM6717SJ
STM6717SF
STM6717TG
STM6717TGG
STM6717TW
STM6717SV
STM6717SY
STM6717TZ
STM6718SF
STM6718TG
STM6718TW
STM6718SV
STM6718SY
STM6718TZ
STM6719SF
STM6719SFB
STM6719TG
STM6719SH
STM6719TW
STM6719SV
STM6719SY
STM6719TZ
STM6720SF
STM6720TG
STM6720TW
STM6720SV
STM6720SY
STM6720TZ
STM6777SF
STM6777TG
STM6777TW
STM6777SV
STM6777SY
STM6777TZ
2.925
2.925
2.925
3.075
3.075
3.075
2.925
2.925
3.075
2.925
3.075
3.075
2.925
2.925
3.075
2.925
2.925
3.075
2.925
3.075
2.925
2.925
3.075
2.925
3.075
3.075
2.925
2.925
3.075
2.925
3.075
3.075
2.925
2.925
3.075
0.788
0.875
1.050
1.110
1.110
1.665
1.575
2.188
2.313
1.050
1.110
1.665
1.575
2.188
2.313
1.050
1.050
1.110
1.313
1.665
1.575
2.188
2.313
1.050
1.110
1.665
1.575
2.188
2.313
1.050
1.110
1.665
1.575
2.188
2.313
7SD1
7SJ1
7SF1
7TG1
7TG9
7TW1
7SV1
7SY1
7TZ1
7SF2
7TG2
7TW2
7SV2
7SY2
7TZ2
7SF3
7SFB
7TG3
7SH3
7TW3
7SV3
7SY3
7TZ3
7SF4
7TG4
7TW4
7SV4
7SY4
7TZ4
7SF5
7TG5
7TW5
7SV5
7SY5
7TZ5
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
Doc ID 11469 Rev 8
27/30
Part numbering
STM6717/6718/6719/6720/STM6777/6778/6779/6780
Table 12. Marking description (continued)
Part number
VRST1 threshold (V) VRST2 threshold (V)
Topside marking
Bottomside marking
STM6778SF
STM6778TG
STM6778TW
STM6778SV
STM6778SY
STM6778TZ
STM6779L
STM6779T
STM6779S
STM6779Y
STM6779V
STM6780L
STM6780T
STM6780S
STM6780Y
STM6780V
2.925
3.075
3.075
2.925
2.925
3.075
4.625
3.075
2.925
2.188
1.575
4.625
3.075
2.925
2.188
1.575
1.050
1.110
1.665
1.575
2.188
2.313
—
7SF6
7TG6
7TW6
7SV6
7SY6
7TZ6
7Lx7
7Tx7
7Sx7
7Yx7
7Vx7
7Lx8
7Tx8
7Sx8
7Yx8
7Vx8
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
PYWW
—
—
—
—
—
—
—
—
—
Note:
For topside marking, “7” is the family number, followed by the V
threshold, V
RST1 RST2
threshold and device number (1,9 = STM6717, 2 = 6718, 3 = 6719, 4 = 6720, 5 = 6777,
6 = 6778, 7 = 6779, 8 = 6780).
For bottomside marking, “P” = assembly site, “Y” = 1-digit year, and “WW” = 2-digit work
week.
28/30
Doc ID 11469 Rev 8
STM6717/6718/6719/6720/STM6777/6778/6779/6780
Revision history
8
Revision history
Table 13. Document revision history
Date
Revision
Changes
18-Oct-2004
25-Oct-2004
14-Jan-2005
09-Feb-2005
1
First draft
1.1
1.2
1.3
Descriptive text, sales types (Table 11)
Update characteristics, pin functions (Table 2)
Update characteristics (Figure 9; Table 3)
Update characteristics and mechanical dimensions; add table
(Figure 9, 10, 27, 28, 29; Table 4, 6, 11, 8, 9)
08-Apr-2005
28-Jul-2005
1.4
1.5
Update characteristics, reset delay (Figure 10, 27; Table 4, 6, 7, 11)
Add operating characteristics; update timings, document status, Lead-
free text (Figure Figure 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
26, 27; Table 11)
13-Sep-2005
2
07-Oct-2005
07-Feb-2007
12-Jun-2007
05-Dec-2007
3
4
5
6
Marked STM6779/6780 as availability request parts (Table 1, 11)
Updated STM6779/6780 availability (cover page, Table 1, 11)
Updated Table 11, added Table 12: Marking description.
Updated cover page, Table 6, 11, and 12.
Updated Features; Table 6, 8, 9, 11, 12; footnote 1 of Table 4;
Section 6: Package mechanical data; added tape and reel
specifications (Figure 30, Table 10, footnote 4 of Table 11);
reformatted document.
22-Mar-2010
02-Aug-2011
7
8
Removed footnote from Table 6: DC and AC characteristics.
Doc ID 11469 Rev 8
29/30
STM6717/6718/6719/6720/STM6777/6778/6779/6780
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2011 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
30/30
Doc ID 11469 Rev 8
STM6779YBWB6E 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
STM6779YGWB6E | STMICROELECTRONICS | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO6, LEAD FREE, MO-178CAA, SOT-23, 6 PIN | 获取价格 | |
STM6779YGWY6F | STMICROELECTRONICS | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO5, ROHS COMPLIANT, MO-178CAA, SOT-23, 5 PIN | 获取价格 | |
STM6779YWB6E | STMICROELECTRONICS | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO6, LEAD FREE, MO-178CAA, SOT-23, 6 PIN | 获取价格 | |
STM6779YWB6F | STMICROELECTRONICS | Dual/triple ultra-low voltage supervisors with push-button reset (with delay option) | 获取价格 | |
STM6779YWY6F | STMICROELECTRONICS | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO5, ROHS COMPLIANT, MO-178CAA, SOT-23, 5 PIN | 获取价格 | |
STM6779ZGWB6E | STMICROELECTRONICS | IC,POWER SUPPLY SUPERVISOR,TSOP,6PIN,PLASTIC | 获取价格 | |
STM6779ZWB6E | STMICROELECTRONICS | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO6, LEAD FREE, MO-178CAA, SOT-23, 6 PIN | 获取价格 | |
STM6779ZWB6F | STMICROELECTRONICS | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO6, LEAD FREE, MO-178CAA, SOT-23, 6 PIN | 获取价格 | |
STM6780 | STMICROELECTRONICS | Dual/triple ultra-low voltage supervisors with push-button reset (with delay option) | 获取价格 | |
STM6780LBWB6E | STMICROELECTRONICS | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO6, ROHS COMPLIANT, MO-178CAB, SOT-23, 6 PIN | 获取价格 |
STM6779YBWB6E 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6