STP11NM60ZFP [STMICROELECTRONICS]
11A, 600V, 0.45ohm, N-CHANNEL, Si, POWER, MOSFET, TO-220AB, ROHS COMPLIANT, TO-220FP, 3 PIN;
| 型号： | STP11NM60ZFP |
| 厂家： | 
ST |
| 描述： | 11A, 600V, 0.45ohm, N-CHANNEL, Si, POWER, MOSFET, TO-220AB, ROHS COMPLIANT, TO-220FP, 3 PIN 局域网 开关 脉冲 晶体管 |
| 文件： | 总16页 (文件大小：493K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
STP11NM60 - STP11NM60FP
STB11NM60 - STB11NM60-1
N-channel 650V @ TJmax - 0.4Ω - 11A TO-220/FP/D2PAK/I2PAK
MDmesh™ Power MOSFET
General features
VDSS
Type
RDS(on)
ID
(@TJ=TJmax
)
3
3
2
2
1
1
STP11NM60
STP11NM60FP
STB11NM60
650 V
650 V
650 V
650 V
<0.45Ω 11A
<0.45Ω 11A
<0.45Ω 11A
<0.45Ω 11A
TO-220
TO-220FP
STB11NM60-1
■ High dv/dt and avalanche capabilities
■ 100% avalanche tested
3
3
2
1
1
i2PAK
D2PAK
■ Low input capacitance and gate charge
■ Low gate input resistance
Internal schematic diagram
Description
The MDmesh™ is a new revolutionary MOSFET
technology that associates the Multiple Drain
process with the Company’s PowerMESH™
horizontal layout. The resulting product has an
outstanding low on-resistance, impressively high
dv/dt and excellent avalanche characteristics. The
adoption of the Company’s proprietary strip
technique yields overall dynamic performance
that is significantly better than that of similar
competition’s products.
Applications
■ Switching application
Order codes
Part number
Marking
Package
Packaging
STB11NK60ZT4
STB11NK60Z-1
STP11NK60Z
B11NK60Z
B11NK60Z
P11NK60Z
P11NK60ZFP
D²PAK
I²PAK
Tape & reel
Tube
TO-220
TO-220FP
Tube
STP11NK60ZFP
Tube
December 2006
Rev 5
1/16
www.st.com
16
Contents
STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1
Contents
1
2
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3
4
5
6
Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2/16
STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1
Electrical ratings
1
Electrical ratings
Table 1.
Symbol
Absolute maximum ratings
Parameter
Value
Unit
TO-220/D²PAK/I²PAK TO-220FP
VGS
ID
Gate- source voltage
30
V
A
Drain current (continuous) at TC = 25°C
Drain current (continuous) at TC=100°C
Drain current (pulsed)
11
7
11(1)
7(1)
ID
A
IDM
44
44(1)
A
(2)
PTOT
Total dissipation at TC = 25°C
Derating Factor
160
1.28
35
W
0.28
W/°C
V/ns
V
dv/dt(3)
VISO
TJ
Peak diode recovery voltage slope
Insulation withstand voltage (DC)
Operating junction temperature
Storage temperature
15
--
2500
-65 to 150
150
°C
°C
Tstg
1. Limited only by maximum temperature allowed
2. Pulse width limited by safe operating area
3. ISD ≤ 11A, di/dt ≤ 400A/µs, VDD ≤ V(BR)DSS, Tj ≤ TJMAX
.
Table 2.
Symbol
Thermal data
Parameter
Value
Unit
TO-220/D²PAK/I²PAK TO-220FP
0.78 3.57
Rthj-case Thermal resistance junction-case Max
°C/W
°C/W
Thermal resistance junction-ambient
Rthj-a
Max
62.5
300
Maximum lead temperature for soldering
purpose
Tl
°C
Table 3.
Avalanche characteristics
Parameter
Symbol
Value
Unit
Avalanche current, repetitive or not-repetitive
(pulse width limited by Tj Max)
IAR
5.5
A
Single pulse avalanche energy
EAS
350
mJ
(starting Tj=25°C, Id=Iar, Vdd=50V)
3/16
Electrical characteristics
STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1
2
Electrical characteristics
(T
=25°C unless otherwise specified)
CASE
Table 4.
Symbol
On/off states
Parameter
Test conditions
Min. Typ. Max. Unit
Drain-source breakdown
voltage
V(BR)DSS
ID = 250 µA, VGS= 0
600
V
V
DS = 600 V
1
µA
µA
Zero gate voltage drain
current (VGS = 0)
IDSS
VDS = 600 V, Tc=125°C
10
Gate body leakage current
(VDS = 0)
IGSS
VGS = 30V
±100
nA
VGS(th)
RDS(on)
VDS= VGS, ID = 250µA
VGS= 10V, ID= 5.5A
Gate threshold voltage
3
4
5
V
Static drain-source on
resistance
0.4
0.45
Ω
Table 5.
Symbol
Dynamic
Parameter
Test conditions
Min. Typ. Max. Unit
V
DS > ID(on) x RDS(on)max,
(1)
gfs
Forward transconductance
5.2
S
ID = 5.5A
Input capacitance
Ciss
Coss
Crss
1000
230
25
pF
pF
pF
Output capacitance
VDS =25V, f=1 MHz, VGS=0
Reverse transfer
capacitance
Coss eq
Equivalent output
capacitance
V
GS=0, VDS =0V to 480V
100
1.6
pF
(2)
f=1 MHz gate DC bias = 0
Test signal level = 20mV
open drain
RG
Gate input resistance
Ω
Qg
Qgs
Qgd
Total gate charge
Gate-source charge
Gate-drain charge
30
10
15
nC
nC
nC
V
DD=480V, ID = 11A
VGS =10V
1. Pulsed: pulse duration=300µs, duty cycle 1.5%
2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS
inceases from 0 to 80% VDSS
4/16
STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1
Electrical characteristics
Min. Typ. Max. Unit
Table 6.
Symbol
Switching times
Parameter
Test conditions
VDD=300 V, ID=5.5A,
RG=4.7Ω, VGS=10V
(see Figure 16)
td(on)
tr
Turn-on Delay Time
Rise Time
20
20
ns
ns
tr(Voff)
VDD=480V, ID=11A,
RG=4.7Ω, VGS=10V
(see Figure 16)
Off-voltage Rise Time
Fall Time
6
ns
ns
ns
tf
11
19
Cross-over Time
tc
Table 7.
Symbol
Source drain diode
Parameter
Test conditions
Min Typ. Max Unit
ISD
Source-drain current
11
44
A
A
V
(1)
Source-drain current (pulsed)
Forward on voltage
ISDM
(2)
ISD=11A, VGS=0
1.5
VSD
ISD=11A,
trr
Reverse recovery time
Reverse recovery charge
Reverse recovery current
390
3.8
ns
µC
A
di/dt = 100A/µs,
Qrr
VDD=100V, Tj=25°C
19.5
IRRM
(see Figure 16)
ISD=11A,
trr
Reverse recovery time
Reverse recovery charge
Reverse recovery current
570
5.7
20
ns
µC
A
di/dt = 100A/µs,
Qrr
VDD=100V, Tj=150°C
IRRM
(see Figure 16)
1. Pulse width limited by safe operating area
2. Pulsed: pulse duration=300µs, duty cycle 1.5%
5/16
Electrical characteristics
STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1
Figure 2. Thermal impedance TO-
2.1
Electrical characteristics (curves)
Figure 1. Safe operating area for
2
2
2
2
TO-220/D PAK/I PAK
220/D PAK/I PAK
Figure 3. Safe operating area for TO-220FP
Figure 4. Thermal impedance for TO-220FP
Figure 5. Output characterisics
Figure 6. Transfer characteristics
6/16
STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1
Electrical characteristics
Figure 7. Transconductance
Figure 8. Static drain-source on resistance
Figure 9. Gate charge vs gate-source voltage Figure 10. Capacitance variations
Figure 11. Normalized gate threshold voltage Figure 12. Normalized on resistance vs
vs temperature temperature
7/16
Electrical characteristics
STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1
Figure 13. Source-drain diode forward
characteristics
8/16
STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1
Test circuit
3
Test circuit
Figure 14. Switching times test circuit for
resistive load
Figure 15. Gate charge test circuit
Figure 16. Test circuit for inductive load
switching and diode recovery times
Figure 17. Unclamped Inductive load test
circuit
Figure 18. Unclamped inductive waveform
Figure 19. Switching time waveform
9/16
Package mechanical data
STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect . The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
10/16
STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1
Package mechanical data
TO-220 MECHANICAL DATA
mm.
TYP
inch
DIM.
MIN.
4.40
0.61
1.15
0.49
15.25
10
MAX.
4.60
0.88
1.70
0.70
15.75
10.40
2.70
5.15
1.32
6.60
2.72
14
MIN.
0.173
0.024
0.045
0.019
0.60
TYP.
MAX.
0.181
0.034
0.066
0.027
0.620
0.409
0.106
0.202
0.052
0.256
0.107
0.551
0.154
A
b
b1
c
D
E
0.393
0.094
0.194
0.048
0.244
0.094
0.511
0.137
e
2.40
4.95
1.23
6.20
2.40
13
e1
F
H1
J1
L
L1
L20
L30
øP
Q
3.50
3.93
16.40
28.90
0.645
1.137
3.75
2.65
3.85
2.95
0.147
0.104
0.151
0.116
11/16
Package mechanical data
STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1
TO-220FP MECHANICAL DATA
mm.
TYP
inch
TYP.
DIM.
MIN.
4.4
MAX.
4.6
2.7
2.75
0.7
1
MIN.
0.173
0.098
0.098
0.017
0.030
0.045
0.045
0.195
0.094
0.393
MAX.
0.181
0.106
0.108
0.027
0.039
0.067
0.067
0.204
0.106
0.409
A
B
2.5
D
2.5
E
0.45
0.75
1.15
1.15
4.95
2.4
F
F1
F2
G
1.7
1.7
5.2
2.7
10.4
G1
H
10
L2
L3
L4
L5
L6
L7
Ø
16
0.630
28.6
9.8
2.9
15.9
9
30.6
10.6
3.6
1.126
.0385
0.114
0.626
0.354
0.118
1.204
0.417
0.141
0.645
0.366
0.126
16.4
9.3
3
3.2
L3
L6
L7
1
2 3
L5
L2
L4
12/16
STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1
Package mechanical data
D2PAK MECHANICAL DATA
mm.
inch
DIM.
MIN.
4.4
TYP
MAX.
4.6
MIN.
0.173
0.098
0.001
0.027
0.044
0.017
0.048
0.352
TYP.
MAX.
0.181
0.106
0.009
0.036
0.067
0.023
0.053
0.368
A
A1
A2
B
2.49
0.03
0.7
2.69
0.23
0.93
1.7
B2
C
1.14
0.45
1.23
8.95
0.6
C2
D
1.36
9.35
D1
E
8
0.315
0.334
10
10.4
0.393
E1
G
8.5
4.88
15
5.28
15.85
1.4
0.192
0.590
0.050
0.055
0.094
0.208
0.625
0.055
0.068
0.126
L
L2
L3
M
1.27
1.4
1.75
3.2
2.4
R
0.4
0.015
V2
0º
4º
1
13/16
Packaging mechanical data
STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1
5
Packaging mechanical data
2
D PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
mm
MIN. MAX. MIN. MAX.
330 12.992
inch
DIM.
A
B
C
D
G
N
T
1.5
12.8
20.2
24.4
100
0.059
13.2 0.504 0.520
0795
26.4 0.960 1.039
3.937
30.4
1.197
BASE QTY
BULK QTY
1000
TAPE MECHANICAL DATA
1000
mm
inch
DIM.
MIN. MAX. MIN. MAX.
10.5 10.7 0.413 0.421
15.7 15.9 0.618 0.626
A0
B0
D
1.5
1.6 0.059 0.063
D1
E
1.59 1.61 0.062 0.063
1.65 1.85 0.065 0.073
F
11.4
4.8
3.9
11.9
1.9
50
11.6 0.449 0.456
5.0 0.189 0.197
4.1 0.153 0.161
12.1 0.468 0.476
2.1 0.075 0.082
1.574
K0
P0
P1
P2
R
T
0.25 0.35 0.0098 0.0137
23.7 24.3 0.933 0.956
W
* on sales type
14/16
STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1
Revision history
6
Revision history
Table 8.
Date
Revision history
Revision
Changes
09-Sep-2004
10-Jun-2005
26-Jul-2006
31-Aug-2006
21-Dec-2006
1
2
3
4
5
First Release
Typing error, wrong description
The document has been reformatted, no content change
Typo mistake on order code
Various changes on “Test conditions” for Table 5. and Table 6.
15/16
STP11NM60-STP11NM60FP-STB11NM60-STB11NM60-1
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2006 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
16/16
相关型号：
STP11NM60_07
N-channel 650V TJmax - 0.4OHM - 11A TO-220/FP/D2PAK/I2PAK MDmesh Power MOSFET
STMICROELECTR
STP11NM65N
N-channel 650 V, 0.425 Ω typ., 11 A MDmeshâ¢II Power MOSFET in DPAK, TO-220FP, I²PAKFP and TO-220 packages
STMICROELECTR
STP11NM80_10
N-channel 800 V, 0.35 Ω, 11 A MDmesh™ Power MOSFET TO-220, TO-220FP, D2PAK, TO-247
STMICROELECTR
STP120NH03L
N-channel 30V - 0.005ohm - 60A - TO-220 / D2PAK / I2PAK STripFET Power MOSFET for DC-DC conversion
STMICROELECTR
©2020 ICPDF网 联系我们和版权申明