STPSC606D [STMICROELECTRONICS]
600 V power Schottky silicon carbide diode; 600 V功率肖特基碳化硅二极管
| 型号： | STPSC606D |
| 厂家： | 
ST |
| 描述： | 600 V power Schottky silicon carbide diode |
| 文件： | 总8页 (文件大小：103K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
STPSC606
600 V power Schottky silicon carbide diode
Features
K
■ No or negligible reverse recovery
■ Switching behavior independent of
temperature
■ Dedicated to PFC boost diode
A
K
Description
TO-220AC
STPSC606D
The SiC diode is an ultrahigh performance power
Schottky diode. It is manufactured using a silicon
carbide substrate. The wide bandgap material
allows the design of a Schottky diode structure
with a 600 V rating. Due to the Schottky
construction no recovery is shown at turn-off and
ringing patterns are negligible. The minimal
capacitive turn-off behavior is independent of
temperature.
K
A
NC
D2PAK
STPSC606G
ST SiC diodes will boost the performance of PFC
operations in hard switching conditions.
Table 1.
Device summary
IF(AV)
6 A
VRRM
Tj (max)
QC (typ)
600 V
175 °C
6 nC
September 2009
Doc ID 16284 Rev 1
1/8
www.st.com
8
Characteristics
STPSC606
1
Characteristics
Table 2.
Symbol
Absolute ratings (limiting values at 25 °C unless otherwise specified)
Parameter
Value
Unit
VRRM Repetitive peak reverse voltage
IF(RMS) Forward rms current
600
18
6
V
A
A
IF(AV) Average forward current
Tc = 125 °C, δ = 0.5
tp = 10 ms sinusoidal, Tc = 25 °C
tp = 10 ms sinusoidal, Tc = 125 °C
tp = 10 µs square, Tc = 25 °C
27
22
Surge non repetitive forward
current
A
IFSM
110
A
IFRM
Tstg
Tj
Repetitive peak forward current
Storage temperature range
δ = 0.1, Tc = 110 °C, Tj = 150 °C
27
-55 to +175
-40 to +175
°C
°C
Operating junction temperature range
Table 3.
Symbol
Thermal resistance
Parameter
Value
Unit
°C/W
Rth(j-c)
Junction to case
2.8
Table 4.
Symbol
Static electrical characteristics (per diode)
Parameter
Tests conditions
Tj = 25 °C
Min. Typ. Max.
Unit
-
-
-
-
15
100
1.4
1.6
75
750
1.7
2.1
Reverse leakage
current
(1)
IR
VR = VRRM
µA
V
Tj = 150 °C
Tj = 25 °C
Tj = 150 °C
(2)
VF
Forward voltage drop
IF = 6 A
1. tp = 10 ms, δ < 2%
2. tp = 500 µs, δ < 2%
To evaluate the conduction losses use the following equation:
2
P = 1.20x IF(AV) + 0.15 x IF (RMS)
Table 5.
Symbol
Other parameters
Parameter
Test conditions
Typ.
Unit
Vr = 400 V, IF = 6 A dIF/dt = -200 A/µs
Tj = 150 °C
Qc
C
Total capacitive charge
Total capacitance
6
nC
pF
Vr = 0 V, Tc = 25 °C, F = 1 Mhz
Vr = 400 V, Tc = 25 °C, F = 1 Mhz
375
30
2/8
Doc ID 16284 Rev 1
STPSC606
Figure 1.
Characteristics
Forward voltage drop versus
forward current (typical values)
Figure 2.
Reverse leakage current versus
reverse voltage applied
(maximum values)
IFM(A)
12
IR(µA)
1.E+04
1.E+03
1.E+02
1.E+01
1.E+00
1.E-01
Tj=175 °C
10
8
Tj=25 °C
Tj=150 °C
Tj=150 °C
6
Tj=175 °C
4
Tj=25 °C
2
VFM(V)
VR(V)
0
0
50 100 150 200 250 300 350 400 450 500 550 600
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Figure 3.
Peak forward current versus case Figure 4.
temperature
Junction capacitance versus
reverse voltage applied
(typical values)
IM(A)
70
C(pF)
300
250
200
150
100
50
T
F=1 MHz
δ=0.1
60
50
40
30
20
10
0
V
OSC=30 mVRMS
Tj=25 °C
tp
=tp/T
δ
δ=0.3
δ=0.5
δ=1
VR(V)
δ=0.7
TC(°C)
75
0
1
10
100
1000
0
25
50
100
125
150
175
Doc ID 16284 Rev 1
3/8
Characteristics
STPSC606
Figure 5.
Relative variation of thermal
impedance junction to case
versus pulse duration
Figure 6.
Non-repetitive peak surge forward
current versus pulse duration
(sinusoidal waveform)
I
FSM(A)
Z
th(j-c)/Rth(j-c)
1.E+03
1.E+02
1.E+01
1.E+00
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
T=25 °C
c
T=125 °C
c
tp(s)
Single pulse
tp(s)
1.E-05
1.E-04
1.E-03
1.E-02
1.E-01
1.E+00
1.E+01
1.E-05
1.E-04
1.E-03
1.E-02
1.E-01
1.E+00
Figure 7.
Total capacitive charges versus dI /dt (typical values)
F
QC(nC)
12
IF=6 A
VR=400 V
Tj=150 °C
10
8
6
4
2
dIF/dt(A/µs)
0
0
50
100
150
200
250
300
350
400
450
500
4/8
Doc ID 16284 Rev 1
STPSC606
Package information
2
Package information
●
●
●
Epoxy meets UL94, V0
Cooling method: convection (C)
Recommended torque: 0.4 to 0.6 N·m
In order to meet environmental requirements, ST offers these devices in different grades of
®
®
ECOPACK packages, depending on their level of environmental compliance. ECOPACK
specifications, grade definitions and product status are available at: www.st.com.
®
ECOPACK is an ST trademark.
Table 6.
TO-220AC dimensions
Dimensions
Millimeters
Ref.
Inches
Min. Max.
Min.
Max.
A
C
4.40
1.23
2.40
0.49
0.61
1.14
4.95
10.00
4.60
1.32
2.72
0.70
0.88
1.70
5.15
10.40
0.173
0.048
0.094
0.019
0.024
0.044
0.194
0.393
0.181
0.051
0.107
0.027
0.034
0.066
0.202
0.409
A
H2
Ø I
C
D
E
L5
L7
F
L6
F1
G
L2
H2
L2
L4
L5
L6
L7
L9
M
D
F1
L9
16.40 typ.
0.645 typ.
L4
13.00
2.65
14.00
2.95
0.511
0.104
0.600
0.244
0.137
0.551
0.116
0.620
0.259
0.154
F
M
E
15.25
6.20
15.75
6.60
G
3.50
3.93
2.6 typ.
0.102 typ.
Diam. I
3.75
3.85
0.147
0.151
Doc ID 16284 Rev 1
5/8
Package information
Table 7.
STPSC606
2
D PAK dimensions
Dimensions
Millimeters
Min. Max.
Ref.
Inches
Min.
Max.
A
A1
A2
B
4.40
2.49
0.03
0.70
1.14
0.45
1.23
8.95
10.00
4.88
15.00
1.27
1.40
2.40
4.60
2.69
0.23
0.93
1.70
0.60
1.36
9.35
10.40
5.28
15.85
1.40
1.75
3.20
0.173
0.098
0.001
0.027
0.045
0.017
0.048
0.352
0.393
0.192
0.590
0.050
0.055
0.094
0.181
0.106
0.009
0.037
0.067
0.024
0.054
0.368
0.409
0.208
0.624
0.055
0.069
0.126
A
E
C2
L2
D
B2
C
L
L3
A1
C2
D
B2
B
R
C
E
G
G
A2
L
M
L2
L3
M
*
V2
* FLAT ZONE NO LESS THAN 2mm
R
0.40 typ.
0°
0.016 typ.
V2
8°
0°
8°
Figure 8.
Footprint (dimensions in mm)
16.90
10.30
5.08
1.30
3.70
8.90
6/8
Doc ID 16284 Rev 1
STPSC606
Ordering information
3
Ordering information
Table 8.
Order code
STPSC606D
STPSC606G-TR
Ordering information
Marking
Package
Weight
Base qty Delivery mode
STPSC606D
STPSC606G
TO-220AC
D2PAK
1.86 g
1.48 g
50
Tube
1000
Tape and reel
4
Revision history
Table 9.
Date
24-Sep-2009
Document revision history
Revision
Changes
1
First issue.
Doc ID 16284 Rev 1
7/8
STPSC606
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2009 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
8/8
Doc ID 16284 Rev 1
相关型号：
STPSC806G
8A, 600V, SILICON CARBIDE, RECTIFIER DIODE, ROHS COMPLIANT, PLASTIC, D2PAK-3
STMICROELECTR
©2020 ICPDF网 联系我们和版权申明