T1035H 6G [STMICROELECTRONICS]
High temperature 10 A Triacs; 高温10 A三端双向可控硅
| 型号： | T1035H 6G |
| 厂家： | 
ST |
| 描述： | High temperature 10 A Triacs |
| 文件： | 总10页 (文件大小：136K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
T1035H, T1050H
Snubberless™
High temperature 10 A Triacs
Main characteristics
A2
Symbol
Value
Unit
G
A2
IT(RMS)
VDRM/VRRM
IGT
10
600
A
V
A1
A2
35 or 50
mA
G
G
A2
A2
Features
A1
A1
2
TO-220AB
T10xxH-6T
D PAK
■ Medium current Triac
■ 150° C max. T turn-off commutation
T10xxH-6G
j
■ Low thermal resistance with clip bonding
■ Very high 3 quadrant commutation capability
■ Packages are RoHS (2002/95/EC) compliant
G
Applications
A2
A1
Especially designed to operate in high power
density or universal motor applications such as
vacuum cleaner and washing machine drum
motor, these 10 A triacs provide a very high
switching capability up to junction temperatures of
150° C.
TO-220AB Insulated
T10xxH-6I
Order codes
The heatsink can be reduced, compared to
traditional triacs, according to the high
performance at given junction temperatures.
Part Numbers
Marking
T1035H-6G
T1050H-6G
T1035H-6G-TR
T1050H-6G-TR
T1035H-6T
T1035H 6G
T1050H 6G
T1035H 6G
T1050H 6G
T1035H 6T
T1050H 6T
T1035H 6I
T1050H 6I
Description
Available in through-hole or surface mount
packages, the T1035H and T1050H triac series
are suitable for general purpose mains power AC
switching.
T1050H-6T
T1035H-6I
T1050H-6I
TM: Snubberless is a trademark of STMicroelectronics
April 2007
Rev 1
1/10
www.st.com
10
Characteristics
T1035H, T1050H
1
Characteristics
Table 1.
Absolute Maximum Ratings
Symbol
Parameter
D2PAK, TO-220AB Tc = 135° C
Value
Unit
IT(RMS)
RMS on-state current (full sine wave)
10
A
TO-220AB Ins
F = 50 Hz
Tc = 125° C
t = 20 ms
100
105
66
Non repetitive surge peak on-state
current (full cycle, Tj initial = 25° C)
ITSM
A
F = 60 Hz
t = 16.7 ms
²
²
²
I t
I t Value for fusing
tp = 10 ms
A s
Critical rate of rise of on-state current
IG = 2 x IGT , tr ≤ 100 ns
dI/dt
F = 120 Hz
Tj = 150° C
Tj = 25° C
50
A/µs
V
Non repetitive surge peak off-state
voltage
V
DRM/VRRM
+ 100
VDSM/VRSM
tp = 10 ms
tp = 20 µs
IGM
Peak gate current
Tj = 150° C
Tj = 150° C
4
1
A
PG(AV)
Average gate power dissipation
W
Tstg
Tj
Storage junction temperature range
Operating junction temperature range
- 40 to + 150
- 40 to + 150
° C
Table 2.
Symbol
Electrical Characteristics (Tj = 25° C, unless otherwise specified)
Value
Test Conditions
Quadrant
Unit
T1035H
T1050H
(1)
IGT
I - II - III
I - II - III
I - II - III
MAX.
MAX.
MIN.
35
50
mA
V
VD = 12 V RL = 33 Ω
VGT
1.0
VGD
VD = VDRM, RL = 3.3 kΩ
0.15
V
(2)
IH
IT = 500 mA
MAX.
35
50
75
90
mA
I - III
II
IL
IG = 1.2 IGT
MAX.
mA
80
110
1500
18
dV/dt (2)
VD = 67% VDRM, gate open, Tj = 150° C
MIN.
MIN.
1000
13
V/µs
(dI/dt)c (2) Without snubber, Tj = 150° C
A/ms
1. minimum I
GT
is guaranted at 20% of I
max.
GT
2. for both polarities of A2 referenced to A1.
2/10
T1035H, T1050H
Characteristics
Table 3.
Symbol
Static Characteristics
Test Conditions
Tj = 25° C
Value
Unit
(1)
(1)
(1)
VT
Vt0
Rd
ITM = 14 A, tp = 380 µs
Threshold voltage
MAX.
MAX.
MAX.
MAX.
MAX.
MAX.
MAX.
1.5
0.80
34
V
V
Tj = 150° C
Tj = 150° C
Tj = 25° C
Tj = 150° C
Dynamic resistance
mΩ
µA
5
VDRM = VRRM
3.6
3.0
2.5
IDRM
(2)
IRRM
VD/VR = 400 V (at peak mains voltage) Tj = 150° C
VD/VR = 200 V (at peak mains voltage) Tj = 150° C
mA
1. for both polarities of A2 referenced to A1.
2. tp = 380 µs
Table 4.
Symbol
Thermal resistance
Parameter
Value
Unit
D2PAK / TO-220AB
TO-220AB Ins
D2PAK
1.45
3.4
45
Rth(j-c)
Junction to case (AC)
Junction to ambient
° C/W
S = 1 cm2
Rth(j-a)
TO-220AB / TO-220AB Ins
60
Figure 1.
Maximum power dissipation versus Figure 2.
RMS on-state current (full cycle)
RMS on-state current versus case
temperature (full cycle)
IT(RMS) (A)
P(W)
11
10
9
12
10
8
α=180 °
TO-220AB/D²PAK
8
TO-220AB
Insulated
7
6
6
5
4
4
3
180°
2
2
α=180 °
1
TC(°C)
IT(RMS)(A)
5
0
0
0
1
2
3
4
6
7
8
9
10
0
25
50
75
100
125
150
3/10
Characteristics
T1035H, T1050H
Figure 3.
RMS on-state current versus
Figure 4.
Variation of thermal impedance
versus pulse duration
ambient temperature (Epoxy
printed circuit board FR4,
copper thickness = 35 µm)
I
T(RMS) (A)
Zth(°C/W)
1.0E+02
1.0E+01
1.0E+00
1.0E-01
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
α=180 °
Zth(j-a)
D²PAK
S
CU=1 cm²
Zth(j-c)
tP(s)
Tamb(°C)
75
1.0E-03
1.0E-02
1.0E-01
1.0E+00 1.0E+01
1.0E+02 1.0E+03
0
25
50
100
125
150
Figure 5.
On-state characteristics (maximum Figure 6.
values)
Surge peak on-state current versus
number of cycles
ITM(A)
100
I
TSM(A)
110
100
90
80
70
60
50
40
30
20
10
0
t=20ms
Non repetitive
Tj initial=25 °C
One cycle
Tj=150 °C
Tj=25 °C
10
Repetitive
Tc=125 °C
Tj max. :
Vt0 = 0.80 V
Rd = 34 mΩ
Number of cycles
VTM(V)
2.5
1
1
10
100
1000
0.0
0.5
1.0
1.5
2.0
3.0
3.5
4.0
4.5
5.0
Figure 7.
Non-repetitive surge peak on-state Figure 8.
current for a sinusoidal pulse with
Relative variation of gate trigger
current, holding current and
latching current versus junction
temperature (typical values)
width t < 10 ms and corresponding
p
2
value of I t
IGT, IH, IL [Tj] / IGT, IH, IL [Tj=25°C]
I
TSM(A), I²t (A²s)
2.5
2.0
1.5
1.0
0.5
0.0
10000
1000
100
Tj initial=25 °C
dI/dt limitation: 50 A/µs
IGT
ITSM
IH & IL
I²t
Tj(°C)
60
tP(ms)
10
0.01
0.10
1.00
10.00
-40
-20
0
20
40
80
100
120
140
160
4/10
T1035H, T1050H
Characteristics
Figure 9.
Relative variation of critical rate of Figure 10. Relative variation of critical rate of
decrease of main current (dI/dt)c
versus reapplied (dV/dt)c
(typical values)
decrease of main current versus
junction temperature
(dI/dt)c [Tj] / (dI/dt)c [Tj=150°C]
(dI/dt)c [ (dV/dt)c ] / Specified (dI/dt)c
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
8
7
6
5
4
3
2
1
0
(dV/dt)C (V/µs)
Tj(°C)
0.1
1.0
10.0
100.0
25
50
75
100
125
150
Figure 11. Leakage current versus junction
temperature for different values of
blocking voltage (typical values)
Figure 12. Variation of thermal resistance
junction to ambient versus copper
surface under tab (Epoxy printed
circuit board FR4,
copper thickness = 35 µm)
Rth(j-a)(°C/W)
IDRM/IRRM(µA)
1.0E+04
80
70
60
50
40
30
20
10
0
D²PAK
VDRM=VRRM=600 V
1.0E+03
VDRM=VRRM=400 V
1.0E+02
VDRM=VRRM=200 V
1.0E+01
1.0E+00
SCU(cm²)
Tj(°C)
1.0E-01
50
75
100
125
150
0
5
10
15
20
25
30
35
40
5/10
Ordering information
T1035H, T1050H
2
Ordering information
T 10 xx H - 6 y -TR
Triac series
Current
10 = 10 A
Sensitivity
35 = 35 mA
50 = 50 mA
High temperature
Voltage
6 = 600 V
Package
2
G = D PAK
T = TO-220AB
I = TO-220AB Ins
Packing
2
Blank = Tube (D PAK, TO-220AB)
2
-TR = Tape and reel (D PAK)
6/10
T1035H, T1050H
Package mechanical data
3
Package mechanical data
●
●
Epoxy meets UL94, V0
Recommended torque 0.4 to 0.6 Nm
2
Table 5.
D PAK dimensions
Dimensions
Millimeters
Ref.
Inches
Min. Typ. Max. Min. Typ. Max.
A
4.30
4.60 0.169
2.69 0.098
0.23 0.001
0.93 0.027
0.181
0.106
0.009
0.037
A
A1 2.49
A2 0.03
E
C2
L2
B
0.70
B2 1.25 1.40
0.45
C2 1.21
D
0.048 0.055
L
C
0.60 0.017
1.36 0.047
9.35 0.352
10.28 0.393
5.28 0.192
15.85 0.590
1.40 0.050
1.75 0.055
0.024
0.054
0.368
0.405
0.208
0.624
0.055
0.069
L3
A1
B2
B
R
C
D
E
G
L
8.95
10.00
4.88
G
A2
2mm min.
FLAT ZONE
15.00
L2 1.27
L3 1.40
R
V2
0.40
0.016
V2
0°
8°
0°
8°
Figure 13. Footprint (dimensions in mm)
16.90
10.30
5.08
1.30
3.70
8.90
7/10
Package mechanical data
T1035H, T1050H
Table 6.
TO-220AB and TO-220AB Ins dimensions
Dimensions
Millimeters
Min. Typ. Max. Min. Typ. Max.
Ref.
Inches
A
15.20
15.90 0.598
0.625
a1
3.75
0.147
C
B
a2 13.00
10.00
14.00 0.511
10.40 0.393
0.88 0.024
1.32 0.048
4.60 0.173
0.70 0.019
2.72 0.094
2.70 0.094
6.60 0.244
3.85 0.147
0.551
0.409
0.034
0.051
0.181
0.027
0.107
0.106
0.259
0.151
Ø I
b2
B
L
F
b1 0.61
b2 1.23
A
I4
C
4.40
l3
c1 0.49
c2 2.40
c2
a1
l2
a2
e
F
2.40
6.20
M
c1
b1
ØI 3.75
e
I4 15.80 16.40 16.80 0.622 0.646 0.661
L
2.65
1.14
1.14
2.95 0.104
1.70 0.044
1.70 0.044
0.116
0.066
0.066
l2
l3
M
2.60
0.102
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect . The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com.
8/10
T1035H, T1050H
Ordering Information
4
Ordering Information
Ordering type
Marking
Package
Weight
Base qty Delivery mode
T10xxH-6G
T10xxH-6G-TR
T10xxH-6T
T10xxH 6G
T10xxH 6G
T10xxH 6T
T10xxH 6I
D2PAK
D2PAK
1.5 g
1.5 g
2.3 g
2.3 g
50
1000
50
Tube
Tape and reel
Tube
TO-220AB
TO-220AB Ins
T10xxH-6I
50
Tube
5
Revision history
Date
Revision
Description of Changes
17-Apr-2007
1
First issue
9/10
T1035H, T1050H
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
10/10
相关型号：
©2020 ICPDF网 联系我们和版权申明