TS971IYLT [STMICROELECTRONICS]
Output rail-to-rail very low noise operational amplifier; 输出轨至轨极低的噪声运算放大器型号: | TS971IYLT |
厂家: | ST |
描述: | Output rail-to-rail very low noise operational amplifier |
文件: | 总17页 (文件大小:474K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TS971-TS972-TS974
Output rail-to-rail very low noise operational amplifier
Features
TS971ILT (SOT23-5L)
■ Rail-to-rail output voltage swing
Output
V
CC
5
1
±2.4V @ V = ±2.5V
CC
V
2
DD
■ Very low noise level: 4nV/√Hz
■ Ultra low distortion: 0.003%
■ High dynamic features: 12MHz, 4V/µs
■ Operating range: 2.7V to 10V
■ ESD protection (2kV)
3
Inverting input
Non-inverting input
4
TS971ID-TS971IDT (SO-8)
N.C.
8
7
6
5
N.C.
1
2
3
4
V
Inverting Input 1
-
CC
■ Latch-up immunity (class A)
+
Non-inverting Input 1
Output 2
N.C.
V
DD
Applications
■ Portable equipment (CD players, PDA)
TS972IN (DIP8)
TS972ID-TS972IDT (SO-8)
TS972IPT (TSSOP8)
■ Portable communications (cell phones,
pagers)
■ Instrumentation & sensoring
■ Professional audio circuits
V
Output 1
1
2
3
4
8
7
6
5
CC
Inverting Input 1
Output 2
-
+
-
Non-inverting Input 1
Inverting Input 2
Non-inverting Input 2
+
V
DD
Description
TS972IQT (DFN8)
The TS97x family of operational amplifiers
operates with voltages as low as ±1.35V and
features output rail-to-rail signal swing. The
TS97x are particularly well suited for portable and
battery-supplied equipment. Very low noise and
low distortion characteristics make them ideal for
audio pre-amplification.
Output 1
1
2
8
7
VCC
Inverting Input 1
Non Inverting Input 1
VDD
Output 2
3
4
6
5
Inverting Input 2
Non Inverting Input 2
The TS971 is available in a variety of packages to
suit all types of applications. For applications
where space-saving is critical, the SOT23
package (2.8 x 2.9mm) or the DFN package
(3 x 3mm) simplify the board design because they
can be placed everywhere.
TS974IN (DIP14)
TS974ID-TS974IDT (SO-14)
TS974IPT (TSSOP14)
14 Output 4
Output 1
Inverting Input 1
Non-inverting Input 1
VCC
1
2
3
4
5
6
7
13 Inverting Input 4
12 Non-inverting Input 4
11 VDD
-
-
+
+
10 Non-inverting Input 3
Non-inverting Input 2
Inverting Input 2
Output 2
+
-
+
-
9
8
Inverting Input 3
Output 3
December 2007
Rev 6
1/17
www.st.com
17
Absolute maximum ratings and operating conditions
TS971-TS972-TS974
1
Absolute maximum ratings and operating conditions
Table 1.
Symbol
Absolute maximum ratings AMR
Parameter
Value
Unit
VCC
Vid
Vin
Tstg
Tj
Supply voltage (1)
12
V
V
V
Differential input voltage (2)
Input voltage (3)
±1
VDD -0.3 to VCC +0.3
-65 to +150
150
Storage temperature range
Maximum junction temperature
Thermal resistance junction to ambient (4)
°C
SOT23-5
DFN8
250
40
SO-8
125
105
120
100
85
Rthja
°C/W
SO-14
TSSOP8
TSSOP14
DIP8
DIP14
80
Thermal resistance junction to case(4)
SOT23-5
DFN8
SO-8
SO-14
TSSOP8
TSSOP14
DIP8
81
5.2
40
31
37
32
41
33
Rthjc
°C/W
DIP14
HBM: human body model(5)
MM: machine model(6)
2
kV
V
ESD
200
1.5
260
CDM: charged device model(7)
kV
°C
Lead temperature (soldering, 10sec)
1. All voltage values, except differential voltage are with respect to network ground terminal.
2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.
3. The magnitude of input and output voltages must never exceed VCC +0.3V.
4. Short-circuits can cause excessive heating and destructive dissipation. Values are typical.
5. Human body model: A 100pF capacitor is charged to the specified voltage, then discharged through a
1.5kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations
while the other pins are floating.
6. Machine model: A 200pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5Ω). This is done for all couples of
connected pin combinations while the other pins are floating.
7. Charged device model: all pins and the package are charged together to the specified voltage and then
discharged directly to the ground through only one pin. This is done for all pins.
No value specified for CDM on SOT23-5 package.
2/17
TS971-TS972-TS974
Absolute maximum ratings and operating conditions
Table 2.
Symbol
Operating conditions
Parameter
Value
Unit
VCC
Vicm
Toper
Supply voltage
2.7 to 10
VDD +1.15 to VCC -1.15
-40 to +125
V
V
Common mode input voltage range
Operating free air temperature range
°C
3/17
Electrical characteristics
TS971-TS972-TS974
2
Electrical characteristics
Table 3.
Symbol
V
= +2.5V, V = -2.5V, T
amb
= 25°C (unless otherwise specified)
Conditions
CC
DD
Parameter
Min. Typ. Max.
Unit
1
5
7
Vio
Input offset voltage
mV
Tmin ≤ Tamb ≤ Tmax
Vicm = 0V, Vo = 0V
Vicm = 0V, Vo = 0V
DVio
Iio
Input offset voltage drift
Input offset current
5
µV/°C
nA
10
150
Vicm = 0V, Vo = 0V
Tmin ≤ Tamb ≤ Tmax
200
200
750
1000
Iib
Input bias current
nA
V
Common mode input voltage
range
Vicm
-1.35
1.35
CMR Common mode rejection ratio
Vicm = ±1.35V
60
60
70
2
85
70
dB
dB
SVR
Avd
Supply voltage rejection ratio
Large signal voltage gain
High level output voltage
Low level output voltage
VCC = ±2V to ±3V
RL = 2kΩ
RL = 2kΩ
RL = 2kΩ
80
dB
VOH
VOL
2.4
-2.4
1.5
100
2
V
-2
V
Isource Output source current
mA
Isink
ICC
Output sink current
mA
Supply current per amplifier
Gain bandwidth product
Slew rate
Unity gain - No load
2.8
mA
GBP
SR
f = 100kHz, RL = 2kΩ, CL = 100pF
AV = 1, Vin = ±1V
8.5
2.8
12
MHz
V/µs
Degrees
dB
4
∅m
Gm
en
Phase margin at unit gain
Gain margin
RL = 2kΩ, CL =100pF
RL = 2kΩ, CL =100pF
f = 100kHz
60
10
Equivalent input noise voltage
Total harmonic distortion
4
nV/√Hz
%
THD
f = 1kHz, AV = -1, RL =10kΩ
0.003
4/17
TS971-TS972-TS974
Electrical characteristics
Figure 1.
Figure 3.
Figure 5.
Input offset voltage distribution
Figure 2.
Voltage gain & phase vs. frequency
Voltage gain & phase vs. frequency Figure 4.
THS vs. V
out
THD vs. V
Figure 6.
THD vs. frequency
out
5/17
Electrical characteristics
TS971-TS972-TS974
Figure 7.
Noise voltage vs. frequency
Figure 8.
Gain bandwidth product vs. I
out
Figure 9.
Phase margin vs. I
Figure 10. Phase margin vs. V
out
CC
Figure 11. Phase margin vs. V
Figure 12. Gain margin vs. V
CC
CC
6/17
TS971-TS972-TS974
Package information
3
Package information
®
In order to meet environmental requirements, ST offers these devices in ECOPACK
packages. These packages have a lead-free second level interconnect. The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com.
3.1
SOT23-5 package information
Figure 13. SOT23-5 package mechanical drawing
Table 4.
Ref.
SOT23-5 package mechanical data
Millimeters
Mils
Typ.
Min.
Typ.
Max.
Min.
Max.
A
A1
A2
b
0.90
0.00
0.90
0.35
0.09
2.80
2.60
1.50
1.45
0.15
1.30
0.50
0.20
3.00
3.00
1.75
35.4
0.00
35.4
13.7
3.5
57.1
5.9
51.2
19.7
7.8
C
D
110.2
102.3
59.0
118.1
118.1
68.8
E
E1
e
0.95
1.9
37.4
74.8
e1
L
0.35
0.55
13.7
21.6
7/17
Package information
TS971-TS972-TS974
3.2
DIP8 package information
Figure 14. DIP8 package mechanical drawing
Table 5.
Ref.
DIP8 package mechanical data
Millimeters
Dimensions
Inches
Min.
Typ.
Max.
Min.
Typ.
Max.
A
A1
A2
b
5.33
0.210
0.38
2.92
0.36
1.14
0.20
9.02
7.62
6.10
0.015
0.115
0.014
0.045
0.008
0.355
0.300
0.240
3.30
0.46
1.52
0.25
9.27
7.87
6.35
2.54
7.62
4.95
0.56
1.78
0.36
10.16
8.26
7.11
0.130
0.018
0.060
0.010
0.365
0.310
0.250
0.100
0.300
0.195
0.022
0.070
0.014
0.400
0.325
0.280
b2
c
D
E
E1
e
eA
eB
L
10.92
3.81
0.430
0.150
2.92
3.30
0.115
0.130
8/17
TS971-TS972-TS974
Package information
3.3
SO-8 package information
Figure 15. SO-8 package mechanical drawing
Table 6.
Ref.
SO-8 package mechanical data
Millimeters
Dimensions
Inches
Min.
Typ.
Max.
Min.
Typ.
Max.
A
A1
A2
b
1.75
0.25
0.069
0.010
0.10
1.25
0.28
0.17
4.80
5.80
3.80
0.004
0.049
0.011
0.007
0.189
0.228
0.150
0.48
0.23
5.00
6.20
4.00
0.019
0.010
0.197
0.244
0.157
c
D
4.90
6.00
3.90
1.27
0.193
0.236
0.154
0.050
H
E1
e
h
0.25
0.40
1°
0.50
1.27
8°
0.010
0.016
1°
0.020
0.050
8°
L
k
ccc
0.10
0.004
9/17
Package information
TS971-TS972-TS974
3.4
TSSOP8 package information
Figure 16. TSSOP8 package mechanical drawing
Table 7.
Ref.
TSSOP8 package mechanical data
Dimensions
Millimeters
Typ.
Inches
Min.
Max.
Min.
Typ.
Max.
A
A1
A2
b
1.2
0.047
0.006
0.041
0.012
0.008
0.122
0.260
0.177
0.05
0.80
0.19
0.09
2.90
6.20
4.30
0.15
1.05
0.30
0.20
3.10
6.60
4.50
0.002
0.031
0.007
0.004
0.114
0.244
0.169
1.00
0.039
c
D
3.00
6.40
4.40
0.65
0.118
0.252
0.173
0.0256
E
E1
e
k
0°
8°
0°
8°
L
0.45
0.60
1
0.75
0.018
0.024
0.039
0.004
0.030
L1
aaa
0.1
10/17
TS971-TS972-TS974
Package information
3.5
DIP14 package information
Figure 17. DIP14 package mechanical drawing
Table 8.
Ref.
DIP14 package mechanical data
Millimeters
Dimensions
Inches
Min.
Typ.
Max.
Min.
Typ.
Max.
a1
B
b
0.51
1.39
0.020
0.055
1.65
0.065
0.5
0.020
0.010
b1
D
E
e
0.25
20
0.787
8.5
2.54
15.24
0.335
0.100
0.600
e3
F
7.1
5.1
0.280
0.201
I
L
3.3
0.130
Z
1.27
2.54
0.050
0.100
11/17
Package information
TS971-TS972-TS974
3.6
SO-14 package information
Figure 18. SO-14 package mechanical drawing
Table 9.
Ref.
SO-14 package mechanical data
Dimensions
Millimeters
Typ.
Inches
Min.
Max.
Min.
Typ.
Max.
A
a1
a2
b
1.75
0.2
0.068
0.007
0.064
0.018
0.010
0.1
0.003
1.65
0.46
0.25
0.35
0.19
0.013
0.007
b1
C
0.5
0.019
c1
D
45° (typ.)
8.55
5.8
8.75
6.2
0.336
0.228
0.344
0.244
E
e
1.27
7.62
0.050
0.300
e3
F
3.8
4.6
0.5
4.0
5.3
0.149
0.181
0.019
0.157
0.208
0.050
0.026
G
L
1.27
0.68
M
S
8° (max.)
12/17
TS971-TS972-TS974
Package information
3.7
TSSOP14 package information
Figure 19. TSSOP14 package mechanical drawing
A2
A
K
L
b
e
A1
c
E
D
E1
PIN 1 IDENTIFICATION
1
Table 10. TSSOP14 package mechanical data
Dimensions
Ref.
Millimeters
Typ.
Inches
Min.
Max.
Min.
Typ.
Max.
A
A1
A2
b
1.2
0.15
1.05
0.30
0.20
5.1
0.047
0.006
0.041
0.012
0.0089
0.201
0.260
0.176
0.05
0.8
0.002
0.031
0.007
0.004
0.193
0.244
0.169
0.004
0.039
1
0.19
0.09
4.9
c
D
5
6.4
0.197
0.252
E
6.2
6.6
E1
e
4.3
4.4
4.48
0.173
0.65 BSC
0.0256 BSC
K
0°
8°
0°
8°
L
0.45
0.60
0.75
0.018
0.024
0.030
13/17
Package information
TS971-TS972-TS974
3.8
DFN8 exposed pad package information
Figure 20. DFN8 3x3 exposed pad package mechanical drawing
Table 11. DFN8 3x3 exposed pad package mechanical data
Dimensions
Ref.
Millimeters
Typ.
Mils
Min.
Max.
Min.
Typ.
Max.
A
A1
A2
A3
b
0.80
0.90
0.02
0.70
0.20
0.23
3.00
2.
1.00
0.05
31.5
35.4
0.8
39.4
2.0
25.6
7.9
0.18
2.875
2.23
0.30
3.125
2.48
7.1
9.1
11.8
97.7
68.5
19.7
D
118.1
90.7
118.1
64.6
25.6
15.7
D2
E
87.8
58.7
11.8
2.875
1.49
3.00
1.64
0.65
0.40
3.125
1.74
E2
e
L
0.30
0.50
14/17
TS971-TS972-TS974
Ordering information
4
Ordering information
Table 12. Order codes
Temperature
Order code
Package
Packing
Marking
range
TS971ID
Tube or
Tape & reel
SO-8
971I
K120
971IY
TS971IDT
TS971ILT
SOT23-5L
TS971IYD(1)
TS971IYDT(1)
SO-8
(Automotive grade level)
Tape & reel
Tube
SOT23-5L
(Automotive grade level)
TS971IYLT(2)
TS972IN
K121
DIP8
SO-8
TS972IN
TS972ID
Tube or
Tape & reel
TS972IDT
TSSOP8
(Thin shrink outline package)
972I
TS972IPT
Tape & Reel
DFN8
TS972IQT
(Dual micro lead frame package)
-40°C, +125°C
TS972IYD(1)
TS972IYDT(1)
SO-8
Tube or
Tape & reel
972IY
(Automotive grade level)
TSSOP8
(Automotive grade level)
TS972IYPT(2)
TS974IN
Tape & reel
Tube
972IY
DIP14
SO-14
TS974IN
TS974ID
Tube or
Tape & reel
TS974IDT
974I
TSSOP14
(Thin shrink outline package)
TS974IPT
TS974IYD(1)
TS974IYDT(1)
SO-14
(Automotive grade level)
974IY
974IY
Tape & reel
TSSOP14
TS974IYPT(2)
(Automotive grade level)
1. Qualified and characterized according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001
& Q 002 or equivalent.
2. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC
Q001 & Q 002 or equivalent are on-going.
15/17
Revision history
TS971-TS972-TS974
5
Revision history
Table 13. Document revision history
Date
Revision
Changes
15-Nov- 2002
9-May- 2005
31-Aug-2005
1
2
3
First release.
Modifications on AMR table (explanation of Vid and Vi limits)
PPAP references inserted in the datasheet, see Table 1 on page 2.
Thermal resistance junction to case data added in Table 1. on page 2
9-Dec-2005
3-Oct-2007
20-Dec-2007
4
5
6
Missing PPAP references inserted in the datasheet, see Table 12:
Order codes.
Added Rthja and Rthjc values for DIP8 and DIP14 packages in
Table 1.
ESD footnotes updated in Table 1: Absolute maximum ratings AMR.
Description section updated on cover page.
Markings for automotive grade parts corrected in Table 12: Order
codes.
Reformatted package information in Section 3: Package information.
Footnotes for automotive grade parts corrected in Table 12: Order
codes.
16/17
TS971-TS972-TS974
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
17/17
相关型号:
©2020 ICPDF网 联系我们和版权申明