TSZ182HYDT [STMICROELECTRONICS]
Automotive-grade, very high accuracy (25 μV), high bandwidth (3 MHz), high temperature (150 °C), zero-drift operational amplifiers;型号: | TSZ182HYDT |
厂家: | ST |
描述: | Automotive-grade, very high accuracy (25 μV), high bandwidth (3 MHz), high temperature (150 °C), zero-drift operational amplifiers |
文件: | 总26页 (文件大小:2027K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TSZ181H, TSZ182H
Datasheet
Automotive-grade, very high accuracy (25 µV), high bandwidth (3 MHz), high
temperature (150 °C), zero-drift operational amplifiers
Features
•
•
AEC-Q100 qualified
Very high accuracy and stability:
–
–
25 µV max. offset voltage at 25 °C
44 µV offset voltage over full temperature range
SOT23-5
SO8
•
•
•
•
•
•
•
Rail-to-rail input and output
Low supply voltage: 2.2 - 5.5 V
Low power consumption: 1 mA max. at 5 V
Gain bandwidth product: 3 MHz
Extended temperature range: -40 to 150 °C
Micropackage: SOT23-5, SO8
Benefits:
–
–
Higher accuracy without calibration
Accuracy virtually unaffected by temperature change
Applications
•
•
•
•
High accuracy signal conditioning
Current measurement
Sensor signal conditioning
Automotive
Maturity status link
TSZ181H, TSZ182H
Related products
Description
For - 40/125 °C
range
The TSZ181H and TSZ182H are a single and dual operational amplifier, featuring
very low offset voltages with virtually zero-drift versus temperature changes. The
TSZ181H and TSZ182H offer rail-to-rail input and output, excellent speed/power
consumption ratio, and 3 MHz gain bandwidth product, while consuming just 1 mA at
5 V. The device operates over an extended range of -40 to +150°C and features an
ultra-low input bias current. These features make the TSZ181H and TSZ182H ideal
for high-accuracy high-bandwidth sensor interfaces for automotive environment.
TSZ181, TSZ182
DS13229 - Rev 2 - December 2020
For further information contact your local STMicroelectronics sales office.
www.st.com
TSZ181H, TSZ182H
Package pin connections
1
Package pin connections
Figure 1. Pin connections (top view)
SOT23-5 (TSZ181H)
SO8 (TSZ182H)
DS13229 - Rev 2
page 2/26
TSZ181H, TSZ182H
Absolute maximum ratings and operation conditions
2
Absolute maximum ratings and operation conditions
Table 1. Absolute maximum ratings
Parameter
Symbol
Value
Unit
V
Supply voltage (1)
V
6
CC
Differential input voltage (2)
Input voltage (3)
V
± V
V
id
CC
V
(V -)-0.2 to (V +)+0.2
V
in
CC
CC
Input current (4)
I
10
mA
°C
°C
in
T
Storage temperature
Junction temperature
-65 to 150
stg
T
160
125
250
4
j
SO8
Thermal resistance junction to ambient (5)(6)
R
th-ja
°C/W
kV
SOT23-5
Human body model (HBM) (7)
ESD
Charged device model (CDM) (8)
1.5
1. All voltage values, except differential voltage, are with respect to network ground terminal.
2. The differential voltage is the non-inverting input terminal with respect to the inverting input terminal.
3.
4. Input current must be limited by a resistor in series with the inputs.
5. are typical values.
6. Short-circuits can cause excessive heating and destructive dissipation.
V
- V must not exceed 6 V, Vin must not exceed 6 V.
CC in
R
th
7. Human body model: 100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for all couples of pin
combinations with other pins floating.
8. Charged device model: all pins plus packages are charged together to the specified voltage and then discharged directly to
ground.
Table 2. Operating conditions
Symbol
Parameter
Value
2.2 to 5.5
Unit
V
V
Supply voltage
CC
V
(V -)-0.1 to (V +)+0.1
Common mode voltage on input pins
Operating free-air temperature range
V
icm
CC
CC
T
-40 to 150
°C
DS13229 - Rev 2
page 3/26
TSZ181H, TSZ182H
Electrical characteristics
3
Electrical characteristics
Table 3. Electrical characteristics (VCC+ = 2.2 V, VCC- = 0 V, Vicm = VCC/2, T = 25 °C, RL=10 kΩ connected to
VCC/2, unless otherwise specified)
Symbol
Parameter
Conditions
Min. Typ. Max.
Unit
DC performance
T=25 °C
3.5
35
54
V
Input offset voltage
µV
IO
Tmin < T < Tmax
Tmin < T < Tmax
T = 25 °C
Input offset voltage drift(1)
|∆V /∆T|
0.15
200
400
400
600
µV/°C
IO
30
60
115
130
15
10
6
Input bias current(2)(V
=V /2)
I
IB
OUT
CC
Tmin < T < Tmax
T = 25 °C
pA
dB
Input offset current(2) (V
=V /2)
I
IO
OUT
CC
Tmin < T < Tmax
T = 25 °C
Common-mode rejection ratio(3)
,
96
90
CMR1
V
= 0 V to V , V =V /2, R >1 MΩ
Tmin < T < Tmax
T=25 °C
ic
CC
OUT
CC
L
Large signal voltage gain,
=0.5 V to (V - 0.5 V)
112
98
A
vd
V
Tmin < T < Tmax
T=25 °C
OUT
CC
High-level output voltage,
= V - V
40
70
30
70
V
OH
V
Tmin < T < Tmax
T = 25 °C
OH
CC
OUT
mV
mA
V
Low-level output voltage
OL
Tmin < T < Tmax
T = 25 °C
4
I
I
(V
= V
)
sink
OUT
CC
Tmin < T < Tmax
T = 25 °C
2.37
3.5
1.9
I
OUT
4
(V
=0 V)
source
OUT
Tmin < T < Tmax
T = 25 °C
Supply current per channel,
= V /2, R >1 MΩ
0.7
1
I
CC
V
Tmin < T < Tmax
1.2
OUT
CC
L
AC performance
Gain bandwidth product,
R = 10 kΩ, C = 100 pF
T = 25 °C
1.6
1.1
2.3
GBP
MHz
Tmin < T < Tmax
L
L
Φ
Phase margin
Gain margin
59
16
degrees
dB
m
R = 10 kΩ, C =100 pF
L
L
G
m
T=25 °C
3
4.6
Slew rate (4)
Settling time
S
V/µs
ns
R
Tmin < T < Tmax
To 0.1%, Vin = 0.8 Vpp
f = 1 kHz
2.5
t
500
50
s
en
Equivalent input noise voltage density
nV/√Hz
f =10 kHz
50
en-pp
Voltage noise
f = 0.1 to 10 Hz
f = 1 kHz
0.6
120
µVpp
dB
C
s
Channel separation
DS13229 - Rev 2
page 4/26
TSZ181H, TSZ182H
Electrical characteristics
Symbol
Parameter
Conditions
T = 25 °C
Tmin < T < Tmax
Min. Typ. Max.
Unit
60
Initialization time, G = 100(5)
t
µs
init
100
1. Input offset measurements are performed on x100 gain configuration. The amplifiers and the gain setting resistors are at the
same temperature.
2. Guaranteed by design.
3. CMR is defined as 20xLOG(∆
/∆ ).
Vicm Vio
4. Slew rate value is calculated as the average between positive and negative slew rates.
5. Initialization time is defined as the delay between the moment when supply voltage exceeds 2.2 V and output voltage
stabilization.
DS13229 - Rev 2
page 5/26
TSZ181H, TSZ182H
Electrical characteristics
Table 4. Electrical characteristics (VCC+ = 3.3 V, VCC- = 0 V, Vicm = VCC/2, T = 25 °C, RL=10 kΩ connected to
VCC/2, unless otherwise specified)
Symbol
Parameter
Conditions
Min. Typ. Max.
Unit
DC performance
T = 25 °C
2
30
49
V
Input offset voltage
Input offset voltage drift(1)
Input bias current (V =V /2)
µV
IO
Tmin < T < Tmax
Tmin < T < Tmax
T = 25 °C
|∆V /∆T|
0.15
200
400
400
600
µV/°C
IO
30
60
I
IB
OUT
CC
Tmin < T < Tmax
T = 25 °C
pA
Input offset current (2) (V
=V /2)
CC
I
IO
OUT
Tmin < T < Tmax
T = 25 °C
Common-mode rejection ratio (3)
,
104
100
120
CMR1
Vic=0 V to V , V =V /2, R >1 MΩ
Tmin < T < Tmax
T = 25 °C,
CC
OUT
CC
L
106
104
132
Common-mode rejection ratio(3)
=V /2, R >1 MΩ
,
ic
V
= 0 to V -1.8 V
CC
dB
CMR2
V
Tmin < T < Tmax,
= 0 to V -2 V
OUT
CC
L
V
ic
CC
Large signal voltage gain,
=0.5 V to (V -0.5 V)
T = 25 °C
120
110
138
16
A
vd
V
Tmin < T < Tmax
T = 25 °C
OUT
CC
High-level output voltage,
= V - V
40
70
30
70
V
OH
V
Tmin < T < Tmax
T = 25 °C
OH
CC
OUT
mV
mA
11
V
Low-level output voltage
OL
Tmin < T < Tmax
T = 25 °C
10
7.1
6
15
I
I
(V
= V
)
CC
sink
OUT
Tmin < T < Tmax
T = 25 °C
I
OUT
11
(V
=0 V)
OUT
source
Tmin < T < Tmax
T = 25 °C
3.8
Supply current per channel,
= V /2, R >1 MΩ
0.7
1
I
CC
V
Tmin < T < Tmax
1.2
OUT
CC
L
AC performance
Gain bandwidth product,
R =10 kΩ, C =100 pF
T = 25 °C
2
2.8
GBP
MHz
Tmin < T < Tmax
1.5
L
L
Φ
Phase margin
Gain margin
56
15
degrees
dB
m
R = 10 kΩ, C = 100 pF
L
L
G
m
T = 25 °C
2.6
2.1
4.5
Slew rate(4)
Settling time
SR
V/µs
ns
Tmin < T < Tmax
To 0.1%, Vin = 1.2 Vpp
f=1 kHz
t
550
40
s
e
n
Equivalent input noise voltage density
nV/√Hz
f = 10 kHz
40
en-pp
Voltage noise
f = 0.1 to 10 Hz
f=1 kHz
0.5
120
µVpp
dB
C
Channel separation
s
DS13229 - Rev 2
page 6/26
TSZ181H, TSZ182H
Electrical characteristics
Symbol
Parameter
Conditions
T = 25 °C
Tmin < T < Tmax
Min. Typ. Max.
Unit
60
Initialization time, G=100 (5)
t
int
µs
100
1. Input offset measurements are performed on x100 gain configuration. The amplifiers and the gain setting resistors are at the
same temperature.
2. Guaranteed by design.
3. CMR is defined as 20xLOG(∆
/∆ ).
Vicm Vio
4. Slew rate value is calculated as the average between positive and negative slew rates.
5. Initialization time is defined as the delay between the moment when supply voltage exceeds 2.2 V and output voltage
stabilization.
DS13229 - Rev 2
page 7/26
TSZ181H, TSZ182H
Electrical characteristics
Table 5. Electrical characteristics (VCC+ = 5 V, VCC- = 0 V, Vicm=VCC/2, T = 25 °C, RL=10 kΩ connected to
VCC/2, unless otherwise specified)
Symbol
Parameter
Conditions
Min. Typ. Max.
Unit
DC performance
T = 25 °C
1
25
44
V
Input offset voltage
µV
IO
Tmin < T < Tmax
Tmin < T < Tmax
T = 25 °C
Input offset voltage drift(1)
Input bias current (2) (V
|∆V /∆T|
0.15
200
400
400
600
µV/°C
IO
30
60
I
=V /2)
IB
OUT
CC
Tmin < T < Tmax
T = 25 °C
pA
Input offset current (2) (V
=V /2)
I
IO
OUT
CC
Tmin < T < Tmax
T = 25 °C
Common-mode rejection ratio(3)
,
108 126
106
CMR1
CMR2
SVR1
Vic=0 V to V , V =V /2, R >1 MΩ
Tmin < T < Tmax
T = 25 °C,
CC
OUT
CC
L
112
110
136
Common-mode rejection ratio(3)
V =0 V to V , V =V /2, R >1 MΩ
,
ic
V
= 0 to V -1.8 V
CC
Tmin < T < Tmax,
ic
CC
OUT
CC
L
Vic = 0 to V -2 V
CC
Supply voltage rejection ratio
=2.2 to 5.5 V, V =0 V, R >1 MΩ
T = 25 °C
105 123
104
dB
V
Tmin < T < Tmax
T=25 °C
CC
ic
L
Large signal voltage gain,
=0.5 V to (V - 0.5 V)
120 144
110
A
vd
V
OUT
Tmin < T < Tmax
CC
V
V
V
=100 mVp, f=400 MHz
=100 mVp, f=900 MHz
=100 mVp, f=1800 MHz
52
RF
RF
RF
52
EMI rejection ratio(5)
EMIRR
72
85
18
VRF=100 mVp, f=2400 MHz
T=25 °C
High-level output voltage,
40
70
30
70
V
OH
V
OH
= V - V
CC OUT
Tmin < T < Tmax
T = 25 °C
mV
mA
13
V
OL
Low-level output voltage
Tmin < T < Tmax
T = 25 °C
20
14
15
9
29
25
I
(V
= V
)
CC
sink
OUT
Tmin < T < Tmax
T = 25 °C
I
OUT
I
(V
=0 V)
OUT
source
Tmin < T < Tmax
T = 25 °C
Supply current per channel,
= V /2, R >1 MΩ
0.8
1
I
CC
V
Tmin < T < Tmax
1.2
OUT
CC
L
AC performance
T=25 °C
2
3
Gain bandwidth product,
R =10 kΩ, C =100 pF
GBP
MHz
L
L
Tmin < T < Tmax
1.5
Φ
Phase margin
Gain margin
56
15
Degrees
dB
m
R =10 kΩ, C =100 pF
L
L
G
m
Slew rate(6)
T=25 °C
2.9
4.7
SR
V/µs
DS13229 - Rev 2
page 8/26
TSZ181H, TSZ182H
Electrical characteristics
Symbol
Parameter
Conditions
Tmin < T < Tmax
Min. Typ. Max.
Unit
Slew rate(6)
Settling time
SR
V/µs
2.4
600
4
To 0.1%, Vin=1.5 Vpp
To 0.01%, Vin=1 Vpp
f = 1 kHz
ns
µs
t
s
37
e
n
Equivalent input noise voltage density
nV/√Hz
f = 10 kHz
37
en-pp
Voltage noise
f=0.1 to 10 Hz
f = 100 Hz
0.4
135
60
µVpp
dB
C
Channel separation
s
T = 25 °C
Initialization time, G=100(7)
t
µs
init
Tmin < T < Tmax
100
1. Input offset measurements are performed on x100 gain configuration. The amplifiers and the gain setting resistors are at the
same temperature.
2. Guaranteed by design
3. CMR is defined as 20xLOG(∆
/∆ ).
Vicm Vio
4. SVR is defined as 20xLOG(∆Vcc/∆ ).
Vio
5. EMIRR is defined as -20Log(VRF_Peak/∆ ), tested on the MiniSO8 package, RF injection on the IN- pin.
Vio
6. Slew rate value is calculated as the average between positive and negative slew rates.
7. Initialization time is defined as the delay between the moment when supply voltage exceeds 2.2 V and output voltage
stabilization.
DS13229 - Rev 2
page 9/26
TSZ181H, TSZ182H
Electrical characteristics
Figure 2. Supply current vs supply voltage
Figure 3. Input offset voltage distribution at
VCC = 5 V
Figure 5. Input offset voltage distribution at
VCC = 2.2 V
Figure 4. Input offset voltage distribution at
VCC = 3.3 V
Figure 6. Input offset voltage distribution at
VCC = 5 V, T = 150 °C
Figure 7. Input offset voltage distribution at
VCC = 5 V, T = -40 °C
DS13229 - Rev 2
page 10/26
TSZ181H, TSZ182H
Electrical characteristics
Figure 8. Input offset voltage distribution at
VCC=2.2 V, T = 150 °C
Figure 9. Input offset voltage distribution at
VCC=2.2 V, T = -40 °C
Figure 11. Input offset voltage vs input common
mode at VCC= 5 V
Figure 10. Input offset voltage vs supply voltage
Figure 12. Input offset voltage vs input common
mode at VCC= 3.3 V
Figure 13. Input offset voltage vs input common
mode at VCC= 2.2 V
DS13229 - Rev 2
page 11/26
TSZ181H, TSZ182H
Electrical characteristics
Figure 15. VOH vs supply voltage
Figure 14. Input offset voltage vs temperature
Figure 17. Output current vs output voltage at
VCC = 5 V
Figure 16. VOL vs supply voltage
Figure 18. Output current vs. output voltage at
VCC = 2.2 V
Figure 19. Input bias current vs common-mode at
VCC = 5 V
DS13229 - Rev 2
page 12/26
TSZ181H, TSZ182H
Electrical characteristics
Figure 21. Output rail linearity
Figure 20. Input bias current vs. temperature at
VCC = 5 V
Figure 22. Bode diagram at VCC=5 V
Figure 23. Bode diagram at VCC=2.2 V
Figure 24. Bode diagram at VCC=3.3 V
Figure 25. Open loop gain vs frequency
DS13229 - Rev 2
page 13/26
TSZ181H, TSZ182H
Electrical characteristics
Figure 27. Negative slew rate vs supply voltage
Figure 26. Positive slew rate vs supply voltage
Figure 29. Noise vs frequency
Figure 28. Noise 0.1 – 10 Hz vs time
Figure 31. Small signal VCC = 5 V
Figure 30. Output overshoot vs load capacitance
DS13229 - Rev 2
page 14/26
TSZ181H, TSZ182H
Electrical characteristics
Figure 33. Large signal VCC = 5 V
Figure 32. Small signal VCC = 2.2 V
Figure 34. Large signal VCC = 2.2 V
Figure 35. Negative overvoltage recovery
VCC = 2.2 V
Figure 36. Positive overvoltage recovery VCC = 5 V
Figure 37. Output impedance vs frequency
DS13229 - Rev 2
page 15/26
TSZ181H, TSZ182H
Electrical characteristics
Figure 39. Settling time negative step (2 V to 0 V)
Figure 38. Settling time positive step (-2 V to 0 V)
at t=0
Figure 40. Settling time positive step (-0.8 V to 0 V)
Figure 41. Settling time negative step (0.8 V to 0 V)
0
Figure 42. Maximum output voltage vs frequency
Figure 43. Crosstalk vs frequency
DS13229 - Rev 2
page 16/26
TSZ181H, TSZ182H
Electrical characteristics
Figure 44. PSSR vs frequency
DS13229 - Rev 2
page 17/26
TSZ181H, TSZ182H
Package information
4
Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages,
depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product
status are available at: www.st.com. ECOPACK is an ST trademark.
4.1
SO8 package information
Figure 45. SO8 package outline
Table 6. SO-8 mechanical data
mm
Inches
Typ.
Dim.
Min.
Typ.
Max.
1.75
0.25
Min.
Max.
0.069
0.01
A
A1
A2
b
0.1
1.25
0.28
0.17
4.8
0.004
0.049
0.011
0.007
0.189
0.228
0.15
0.48
0.23
5
0.019
0.01
c
D
4.9
6
0.193
0.236
0.154
0.05
0.197
0.244
0.157
E
5.8
6.2
4
E1
e
3.8
3.9
1.27
h
0.25
0.4
0.5
0.01
0.02
0.05
L
1.27
0.016
L1
k
1.04
0.04
0
8 °
1 °
8 °
DS13229 - Rev 2
page 18/26
TSZ181H, TSZ182H
SO8 package information
mm
Inches
Typ.
Dim.
Min.
Typ.
Max.
Min.
Max.
ccc
0.1
0.004
DS13229 - Rev 2
page 19/26
TSZ181H, TSZ182H
SOT23-5 package information
4.2
SOT23-5 package information
Figure 46. SOT23-5 package outline
Table 7. SOT23-5 mechanical data
Dimensions
Ref.
Millimeters
Typ.
Inches
Min.
Max.
1.45
0.15
1.30
0.50
0.20
3.00
Min.
Typ.
Max.
0.057
0.006
0.051
0.020
0.008
0.118
A
A1
A2
B
0.90
1.20
0.035
0.047
0.90
0.35
0.09
2.80
1.05
0.40
0.15
2.90
1.90
0.95
2.80
1.60
0.35
0.035
0.014
0.004
0.110
0.041
0.016
0.006
0.114
0.075
0.037
0.110
0.063
0.014
C
D
D1
e
E
2.60
1.50
3.00
1.75
0.102
0.059
0.118
0.069
F
L
0.10
0.60
0.004
0.024
K
0 degrees
10 degrees
0 degrees
10 degrees
DS13229 - Rev 2
page 20/26
TSZ181H, TSZ182H
Ordering information
5
Ordering information
Table 8. Ordering information
Order code
TSZ182HYDT (1)
TSZ181HYLT (1)
Package
SO8
Packing
Marking
TSZ182H
K229
Tape and reel
SOT23-5
1. Qualified and characterized according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001 &
Q002 or equivalent.
DS13229 - Rev 2
page 21/26
TSZ181H, TSZ182H
Revision history
Table 9. Document revision history
Date
Version
Changes
20-Jan-2020
1
Initial release.
Added new part number TSZ181H and new Section 4.2 SOT23-5 package
information
09-Dec-2020
2
Updated package figure on the cover page, Figure 1 and new order code in
Table 8.
DS13229 - Rev 2
page 22/26
TSZ181H, TSZ182H
Contents
Contents
1
2
3
4
Package pin connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Absolute maximum ratings and operation conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
4.1
4.2
SO8 package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
SOT23-5 package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
5
Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
DS13229 - Rev 2
page 23/26
TSZ181H, TSZ182H
List of tables
List of tables
Table 1.
Table 2.
Table 3.
Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical characteristics (VCC+ = 2.2 V, VCC- = 0 V, Vicm = VCC/2, T = 25 °C, RL=10 kΩ connected to VCC/2, unless
otherwise specified) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Electrical characteristics (VCC+ = 3.3 V, VCC- = 0 V, Vicm = VCC/2, T = 25 °C, RL=10 kΩ connected to VCC/2, unless
otherwise specified) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Electrical characteristics (VCC+ = 5 V, VCC- = 0 V, Vicm=VCC/2, T = 25 °C, RL=10 kΩ connected to VCC/2, unless
otherwise specified) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
SO-8 mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
SOT23-5 mechanical data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Ordering information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Document revision history. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Table 4.
Table 5.
Table 6.
Table 7.
Table 8.
Table 9.
DS13229 - Rev 2
page 24/26
TSZ181H, TSZ182H
List of figures
List of figures
Figure 1.
Figure 2.
Figure 3.
Pin connections (top view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Supply current vs supply voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Input offset voltage distribution at VCC = 5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Input offset voltage distribution at VCC = 3.3 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Input offset voltage distribution at VCC = 2.2 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Input offset voltage distribution at VCC = 5 V, T = 150 °C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Input offset voltage distribution at VCC = 5 V, T = -40 °C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Input offset voltage distribution at VCC=2.2 V, T = 150 °C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Input offset voltage distribution at VCC=2.2 V, T = -40 °C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Input offset voltage vs supply voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Input offset voltage vs input common mode at VCC= 5 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Input offset voltage vs input common mode at VCC= 3.3 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Input offset voltage vs input common mode at VCC= 2.2 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Input offset voltage vs temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
VOH vs supply voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
VOL vs supply voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Output current vs output voltage at VCC = 5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Output current vs. output voltage at VCC = 2.2 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Input bias current vs common-mode at VCC = 5 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Input bias current vs. temperature at VCC = 5 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Output rail linearity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Bode diagram at VCC=5 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Bode diagram at VCC=2.2 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Bode diagram at VCC=3.3 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Open loop gain vs frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Positive slew rate vs supply voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Negative slew rate vs supply voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Noise 0.1 – 10 Hz vs time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Noise vs frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Output overshoot vs load capacitance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Small signal VCC = 5 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Small signal VCC = 2.2 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Large signal VCC = 5 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Large signal VCC = 2.2 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Negative overvoltage recovery VCC = 2.2 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Positive overvoltage recovery VCC = 5 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Output impedance vs frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Settling time positive step (-2 V to 0 V). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Settling time negative step (2 V to 0 V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Settling time positive step (-0.8 V to 0 V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Settling time negative step (0.8 V to 0 V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Maximum output voltage vs frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Crosstalk vs frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
PSSR vs frequency. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
SO8 package outline. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
SOT23-5 package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Figure 4.
Figure 5.
Figure 6.
Figure 7.
Figure 8.
Figure 9.
Figure 10.
Figure 11.
Figure 12.
Figure 13.
Figure 14.
Figure 15.
Figure 16.
Figure 17.
Figure 18.
Figure 19.
Figure 20.
Figure 21.
Figure 22.
Figure 23.
Figure 24.
Figure 25.
Figure 26.
Figure 27.
Figure 28.
Figure 29.
Figure 30.
Figure 31.
Figure 32.
Figure 33.
Figure 34.
Figure 35.
Figure 36.
Figure 37.
Figure 38.
Figure 39.
Figure 40.
Figure 41.
Figure 42.
Figure 43.
Figure 44.
Figure 45.
Figure 46.
DS13229 - Rev 2
page 25/26
TSZ181H, TSZ182H
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST
products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST
products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or service
names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2020 STMicroelectronics – All rights reserved
DS13229 - Rev 2
page 26/26
相关型号:
TSZ182IDT
Very high accuracy (25 μV) high bandwidth (3 MHz) zero drift 5 V operational amplifiers
STMICROELECTR
TSZ182IQ2T
Very high accuracy (25 μV) high bandwidth (3 MHz) zero drift 5 V dual operational amplifiers
STMICROELECTR
TSZ182IST
Very high accuracy (25 μV) high bandwidth (3 MHz) zero drift 5 V dual operational amplifiers
STMICROELECTR
TSZ182IYDT
Very high accuracy (25 μV) high bandwidth (3 MHz) zero drift 5 V operational amplifiers
STMICROELECTR
TSZ182IYST
Very high accuracy (25 μV) high bandwidth (3 MHz) zero drift 5 V dual operational amplifiers
STMICROELECTR
©2020 ICPDF网 联系我们和版权申明