VB6871 [STMICROELECTRONICS]

QXGA camera module with auto-focus; 支持自动对焦QXGA相机模块
VB6871
型号: VB6871
厂家: ST    ST
描述:

QXGA camera module with auto-focus
支持自动对焦QXGA相机模块

文件: 总4页 (文件大小:102K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
VB6871  
QXGA camera module with auto-focus  
Data Brief  
Features  
3.2 megapixel sensor (2064 x 1544)  
1.75 µm pixel size, 1/4 inch optical format  
RGB Bayer color filter array  
Auto-focus mechanism with simple control  
interface  
Multi-element, high quality lens  
MDDI type 1 host / serial interface  
– 450 Mbps data transfer  
Description  
– differential data and strobe signalling  
This datasheet outlines a high performance  
3.2 megapixel auto-focus camera module  
(VB6871) designed for use across a range of  
mobile phone handsets and accessories, via the  
VESA-standard MDDI interface.  
On-board 10-bit ADC  
Analog binning (2x2)  
Flash/white-LED support  
Integrated defect correction  
Automatic dark level calibration  
Smooth frame rate control  
GPIO  
Designed for both video and high-quality still  
image capture, the VB6871 is capable of  
generating 3.2 MP raw bayer images at up to  
12 fps @10-bit, and 16 fps @8-bit pixel  
resolution. Higher frame rates can be achieved  
with smaller image sizes, such as 30 fps for  
WVGA @10-bit pixel resolution.  
Ultra low power standby mode  
Compact size: 8.5 mm x 8.5 mm x 5.9 mm  
The module design is optimized for both footprint  
and height. The auto-focus mechanism combined  
with a multi-element lens provides excellent  
image quality at focus distances from less than  
10 cm to infinity.  
All external components, including the auto-focus  
actuator, are integrated within the camera  
module.  
VB6871 offers an ultra low power consumption  
hardware standby mode consuming less than  
30 µW (typ.).  
March 2008  
Rev 1  
1/4  
For further information contact your local STMicroelectronics sales office.  
www.st.com  
4
Overview  
VB6871  
1
Overview  
Figure 1.  
System diagram  
Figure 2.  
Block diagram  
VB6871  
EXTCLK  
XSHUTDOWN  
PLL and clock management  
VDIG  
Power Mgmt Power-on reset  
EXTCLK  
DGND  
VB6871  
3.2 megapixel  
auto-focus  
camera  
Line SRAM  
Sensor  
control  
registers  
XSHUTDOWN  
WLED  
VCAP  
WLED  
GPIO  
X Decoder  
Application system  
MDDI client  
VANA  
AGND  
Column ADC  
GPIO  
module  
Dark Cal  
Scaling  
2064 x 1544  
Pixel array  
MDDI  
STRB+  
STRB-  
DATA+  
DATA-  
(STRB, DATA)  
Defect  
Correction  
Output  
Column ADC  
X Decoder  
De-rating  
Output  
Formatter  
Line SRAM  
Table 1.  
Technical specifications  
Parameter  
Description  
Pixel resolution  
Sensor technology  
Pixel size  
2064 x 1544 (QXGA = 2048x1536)  
IMG175 STs 90nm based CMOS imaging process  
1.75 µm x 1.75 µm  
+ 81 dB  
Exposure control  
Analog gain  
+ 24 dB (max)  
+ 6 dB (max)  
60 dB  
Digital gain  
Dynamic range  
Signal to noise  
36 dB (@ 100 lux)  
Analog: 2.4 V - 2.9 V  
Digital: 1.7 V - 1.9 V  
Supply voltages  
<125 mW in infinity  
<300 mW at macro including actuator current  
Average power consumption 12.5 fps  
Package size (lxwxh)  
Lens  
8.5 mm x 8.5 mm x 5.9 mm  
51° +/- 2 HFOV F/2.8  
<|1.0%|  
TV distortion  
Relative illumination  
Package type  
System attach  
45 % (typ.)  
SmOP2 auto-focus  
SMIA85 socket or flex  
2/4  
VB6871  
Ordering information  
2
Ordering information  
Table 2.  
Ordering information  
Order code  
Package  
Packing  
SMIA85 socket  
VB6871S0VO/TR(1)  
SmOP2 auto-focus  
1. ECOPACK® package  
3
Revision history  
Table 3.  
Date  
25-Mar-2008  
Document revision history  
Revision  
Changes  
1
Initial release.  
3/4  
VB6871  
Please Read Carefully:  
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the  
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any  
time, without notice.  
All ST products are sold pursuant to ST’s terms and conditions of sale.  
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no  
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.  
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this  
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products  
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such  
third party products or services or any intellectual property contained therein.  
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED  
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED  
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS  
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.  
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT  
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING  
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,  
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE  
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.  
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void  
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any  
liability of ST.  
ST and the ST logo are trademarks or registered trademarks of ST in various countries.  
Information in this document supersedes and replaces all information previously supplied.  
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.  
© 2008 STMicroelectronics - All rights reserved  
STMicroelectronics group of companies  
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -  
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America  
www.st.com  
4/4  

相关型号:

VB6871S0VO/TR

QXGA camera module with auto-focus
STMICROELECTR

VB7009

Mini-ITX Series
VIA

VB7009-10E

Mini-ITX Series
VIA

VB7009-12QCE

Mini-ITX Series
VIA

VB7009-16

Mini-ITX Series
VIA

VB762-070.0M

LVPECL Output Clock Oscillator
CONNOR-WINFIE

VB762-155.52M

LVPECL Output Clock Oscillator
CONNOR-WINFIE

VB762-200.0M

LVPECL Output Clock Oscillator
CONNOR-WINFIE

VB902-120.0M

LVDS Output Clock Oscillator, 120MHz Nom,
CONNOR-WINFIE

VB902-148.5M

LVDS Output Clock Oscillator, 148.5MHz Nom,
CONNOR-WINFIE

VB902-160.0M

LVDS Output Clock Oscillator, 160MHz Nom,
CONNOR-WINFIE

VB921

HIGH VOLTAGE IGNITION COIL DRIVER POWER I.C.
STMICROELECTR