XZM2DG78W [SUNLED]
LED GREEN CLEAR 2SMD;
| 型号： | XZM2DG78W |
| 厂家： | 
SUNLED CORPORATION |
| 描述： | LED GREEN CLEAR 2SMD 光电 |
| 文件： | 总4页 (文件大小：306K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Part Number: XZM2DG78W
3.2x2.4mm SMD CHIP LED LAMP
Features
● Ideal for indication light on hand held products
● Long life and robust package
● Standard Package: 1,500pcs/ Reel
● MSL (Moisture Sensitivity Level): 3
● RoHS compliant
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Absolute Maximum Ratings
(TA=25°C)
Green
(InGaN)
Operating Characteristics
(TA=25°C)
Green
(InGaN)
Unit
Unit
V
Reverse Voltage
Forward Current
VR
IF
5
V
Forward Voltage (Typ.)
(IF=20mA)
VF
VF
IR
3.2
4
30
mA
Forward Voltage (Max.)
(IF=20mA)
Forward Current (Peak)
1/10 Duty Cycle
0.1ms Pulse Width
V
iFS
100
mA
Reverse Current (Max.)
(VR=5V)
50
uA
Power Dissipation
PD
TA
120
mW
°C
Wavelength of Peak
Emission CIE127-2007*(Typ.)
(IF=20mA)
Operating Temperature
Storage Temperature
-40 ~ +85
-40 ~ +85
λP
λD
520*
525*
nm
nm
Tstg
Wavelength of Dominant
Emission CIE127-2007*(Typ.)
(IF=20mA)
Electrostatic Discharge Threshold
(HBM)
450
V
A Relative Humidity between 40% and 60% is recommended in
ESD-protected work areas to reduce static build up during assembly
process (Reference JEDEC/JESD625-A and JEDEC/J-STD-033)
Spectral Line Full Width
At Half-Maximum (Typ.)
(IF=20mA)
△λ
35
nm
pF
Capacitance (Typ.)
(VF=0V, f=1MHz)
C
100
Luminous Intensity
Wavelength
CIE127-2007*
nm
Viewing
Angle
2θ 1/2
Part
Number
Emitting
Color
Emitting
Material
CIE127-2007*
(IF=20mA)
mcd
Lens-color
λP
min.
3600*
typ.
XZM2DG78W
Green
InGaN
Water Clear
5990*
520*
20°
*Luminous intensity value and wavelength are in accordance with CIE127-2007 standards.
Sep 19,2016
XDSB4259 V5-Z Layout: Maggie L.
P. 1/4
Part Number: XZM2DG78W
3.2x2.4mm SMD CHIP LED LAMP
Green
Green
LED is recommended for reflow soldering and
soldering profile is shown below.
Sep 19,2016
XDSB4259 V5-Z Layout: Maggie L.
P. 2/4
Part Number: XZM2DG78W
3.2x2.4mm SMD CHIP LED LAMP
The device has a single mounting surface.
The device must be mounted according to
the specifications.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Specification (Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous intensity / luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Sep 19,2016
XDSB4259 V5-Z Layout: Maggie L.
P. 3/4
Part Number: XZM2DG78W
3.2x2.4mm SMD CHIP LED LAMP
PACKING & LABEL SPECIFICATIONS
XZxxx78x
TERMS OF USE
1. Data presented in this document reflect statistical figures and should be treated as technical reference only.
2. Contents within this document are subject to improvement and enhancement changes without notice.
3. The product(s) in this document are designed to be operated within the electrical and environmental specifications indicated on the datasheet.
User accepts full risk and responsibility when operating the product(s) beyond their intended specifications.
4. The product(s) described in this document are intended for electronic applications in which a person’s life is not reliant upon the LED. Please
consult with a SunLED representative for special applications where the LED may have a direct impact on a person’s life.
5. The contents within this document may not be altered without prior consent by SunLED.
6. Additional technical notes are available at http://www.SunLEDusa.com/TechnicalNotes.asp
Sep 19,2016
XDSB4259 V5-Z Layout: Maggie L.
P. 4/4
相关型号：
©2020 ICPDF网 联系我们和版权申明