SQV75L2D27A2 [SUNTSU]

Ceramic SMT Quick Turn 6 Pad LVDS VCXO;
SQV75L2D27A2
型号: SQV75L2D27A2
厂家: Suntsu Electronics, Inc.    Suntsu Electronics, Inc.
描述:

Ceramic SMT Quick Turn 6 Pad LVDS VCXO

石英晶振 压控振荡器
文件: 总4页 (文件大小:822K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Ceramic SMT Quick Turn 6 Pad LVDS VCXO  
SQV75L Series  
7.0mm x 5.0mm  
Features  
±±0ppm (Frequency Stability) Available  
Ceramic Package  
Applications  
Micro Processors  
FPGA  
LVDS  
Programmed VCXO  
Tape and Reel  
Storage Area/Networking  
Digital Video  
Portable Computers  
Part Numbering Guide  
SQV 75 L 3 A 48 A 2 - 67.500M  
SUNTSU QUICK  
TURN VCXO  
FREQUENCY  
MHz  
TRI-STATE  
(ENABLE/DISABLE)  
BLANK : No Connect  
7.0mm x 5.0mm  
LVDS  
PULLABILITY  
± : Pin ±  
A : ±150ppm  
B : ±100ppm  
C : ±80ppm  
D : ±50ppm  
OPERATING  
SUPPLY VOLTAGE  
TEMPERATURE RANGE  
± : ±.5V±5%  
07 : 0°C - +70°C  
3 : 3.3V±5%  
FREQUENCY STABILITY  
16 : -10°C - +60°C  
17 : -10°C - +70°C  
±7 : -±0°C - +70°C  
38 : -30°C - +85°C  
48 : -40°C - +85°C  
COMPLIANT  
A : ±50ppm  
B : ±30ppm  
C : ±±5ppm  
D : ±±0ppm  
*E : ±15ppm  
Cage Code: 4GUT4  
To customize your parameters contact a Suntsu representative.  
* For frequency stability option E contact a Suntsu representative.  
Electrical Parameters  
Units  
Minimum  
Typical  
Maximum  
Remarks  
Frequency Range  
MHz  
8
1500  
Frequency Stability (Includes Initial  
Tolerance at ±5°C, Frequency  
Stability over Op Temp, Output Load  
Change, Supply Voltage Change,  
and First Year Aging at ±5°C.)  
ppm  
-±0  
+±0  
See part numbering guide for options.  
See part numbering guide for options.  
Operating Temperature  
Storage Temperature  
°C  
°C  
V
-40  
-55  
+85  
+1±5  
±.6±5  
3.465  
65  
Supply Voltage (VDD) ±.5V Option  
Supply Voltage (VDD) 3.3V Option  
Current (IDD) ±.5V Option  
Current (IDD) 3.3V Option  
Current Voltage (VC) ±.5V Option  
Current Voltage (VC) 3.3V Option  
Pullability  
±.375  
3.135  
±.5  
3.3  
V
mA  
mA  
V
70  
0
0
±.5  
V
3.3  
ppm  
%
±50  
±100  
±150  
10  
See part numbering guide for options.  
Linearity  
Output Load (LVDS)  
100  
1.6  
Output Logic HIGH Level (VOH)  
Output Logic LOW Level (VOL)  
Differential Output Voltage (VOD)  
Differential Output Error (DVOD)  
Offset Voltage (VOS)  
V
1.43  
1.1  
V
0.9  
mV  
mV  
V
±47  
330  
454  
50  
1.1±5  
1.±50  
50  
1.375  
50  
Offset Error (DVOS)  
mV  
ns  
Rise (TR) And Fall (TF) Time  
1
Symmetry (Duty Cycle)  
Tri-State Input Voltage - Enable  
%
V
45  
0.7*VDD  
55  
No Connection  
Tri-State Input Voltage - Disable  
Start-Up Time  
V
0.3*VDD  
10  
ms  
ps  
Phase Jitter (1±KHz ~ ±0MHz)  
0.7  
1.5  
Suntsu Electronics, Inc.  
142 TECHNOLOGY DR., SUITE 150  
IRVINE, CA 92618  
www.suntsu.com  
Specifications are subject  
to change without notice.  
Call: +1-949-783-7300 | Fax: +1-949-783-7301  
Ceramic SMT Quick Turn 6 Pad LVDS VCXO  
SQV75L Series  
7.0mm x 5.0mm  
Outline Drawing & Land Pattern  
All dimensions are in millimeters (mm) unless otherwise noted. Drawings are not to scale.  
Test Circuit (LVDS)  
Waveform (LVDS)  
Typical Phase Noise Performance (Measured By Agilent E5052A)  
Frequency - 150.000MHz  
Frequency - 156.250MHz  
Suntsu Electronics, Inc.  
142 TECHNOLOGY DR., SUITE 150  
IRVINE, CA 92618  
www.suntsu.com  
Specifications are subject  
to change without notice.  
Call: +1-949-783-7300 | Fax: +1-949-783-7301  
Ceramic SMT Quick Turn 6 Pad LVDS VCXO  
SQV75L Series  
7.0mm x 5.0mm  
Typical Jitter Performance (Measured By Agilent E5052A)  
Frequency - 150.000MHz  
Reflow Profile  
Frequency - 156.250MHz  
Part Marking  
Tp (Time At 260°C. 20-40 Sec)  
260  
Rup (Ramp Up, 3°C/Sec Max)  
217  
200  
TI (Time Above 217°C.  
60-150Sec)  
150  
Rdn (Ramp Down,  
6°C/Sec Max)  
Ts (Preheat Time.  
60-180Sec)  
T 25°C to Peak (480Sec Max)  
Time (sec)  
Tape And Reel Dimensions  
All dimensions are in millimeters (mm) unless otherwise noted. Drawings are not to scale.  
1,000pcs/Reel  
Suntsu Electronics, Inc.  
142 TECHNOLOGY DR., SUITE 150  
IRVINE, CA 92618  
www.suntsu.com  
Specifications are subject  
to change without notice.  
Call: +1-949-783-7300 | Fax: +1-949-783-7301  
Ceramic SMT Quick Turn 6 Pad LVDS VCXO  
SQV75L Series  
7.0mm x 5.0mm  
Environmental Specifications  
Mechanical Specifications  
Temperature Cycling  
MIL-STD-883, Method 1010, Condition B  
Mechanical Shock  
MIL-STD-±0±, Method ±13, Condition B  
MIL-STD-883, Method ±007, Condition A  
MIL-STD-883, Method 1004  
Fine Leak Test  
MIL-STD-883, Method 1014, Condition A  
MIL-STD-883, Method 1014, Condition C  
Vibration  
Gross Leak Test  
Moisture Resistance  
Solderability  
MIL-STD-883, Method ±003  
J-STD-0±0, MSL 1  
Resistance to Solvents  
MIL-STD-±0±, Method ±15  
Moisture Sensitivity  
Resistance to Soldering Heat  
MIL-STD-±0±, Method ±10, Condition K  
Suntsu Electronics, Inc.  
142 TECHNOLOGY DR., SUITE 150  
IRVINE, CA 92618  
www.suntsu.com  
Specifications are subject  
to change without notice.  
Call: +1-949-783-7300 | Fax: +1-949-783-7301  

相关型号:

SQV75L2D27B

Ceramic SMT Quick Turn 6 Pad LVDS VCXO

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SUNTSU

SQV75L2D27B2

Ceramic SMT Quick Turn 6 Pad LVDS VCXO

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SUNTSU

SQV75L2D27C

Ceramic SMT Quick Turn 6 Pad LVDS VCXO

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SUNTSU

SQV75L2D27C2

Ceramic SMT Quick Turn 6 Pad LVDS VCXO

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SUNTSU

SQV75L2D27D

Ceramic SMT Quick Turn 6 Pad LVDS VCXO

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SUNTSU

SQV75L2D27D2

Ceramic SMT Quick Turn 6 Pad LVDS VCXO

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SUNTSU

SQV75L2D38A

Ceramic SMT Quick Turn 6 Pad LVDS VCXO

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SUNTSU

SQV75L2D38A2

Ceramic SMT Quick Turn 6 Pad LVDS VCXO

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SUNTSU

SQV75L2D38B

Ceramic SMT Quick Turn 6 Pad LVDS VCXO

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SUNTSU

SQV75L2D38B2

Ceramic SMT Quick Turn 6 Pad LVDS VCXO

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SUNTSU

SQV75L2D38C

Ceramic SMT Quick Turn 6 Pad LVDS VCXO

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SUNTSU

SQV75L2D38C2

Ceramic SMT Quick Turn 6 Pad LVDS VCXO

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
SUNTSU