SUO22L3A381 [SUNTSU]

Ceramic SMD Ultra Low Jitter 6 Pad LVDS Oscillator;


型号：	SUO22L3A381
厂家：	Suntsu Electronics, Inc.
描述：	Ceramic SMD Ultra Low Jitter 6 Pad LVDS Oscillator
文件：	总4页 (文件大小：629K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Ceramic SMD Ultra Low Jitter 6 Pad LVDS Oscillator

SUO22L Series

2.5mm x 2.0mm

Features

Applications

•

20ppm (Frequency Stability) Available

• Fiber Channel

• Ceramic Package

• LVDS

• Gigabit Ethernet

• PCI Express

• Tape and Reel

• Ultra Low Phase Jitter

Part Numbering Guide

SUO 22 L 3 A 48 1 - 100.000M

SUNTSU ULTRA

LOW JITTER OSC

FREQUENCY

MHz

TRI-STATE

2.5mm x 2.0mm

(ENABLE/DISABLE)

1 : Pin 1

2 : Pin 2

LVDS

OPERATING TEMPERATURE

SUPPLY VOLTAGE

1 : 1.8V 5%

RANGE

07 : 0°C - +70°C

2 : 2.5V 5%

3 : 3.3V 5%

FREQUENCY STABILITY

16 : -10°C - +60°C

17 : -10°C - +70°C

27 : -20°C - +70°C

38 : -30°C - +85°C

48 : -40°C - +85°C

A : 50ppm

COMPLIANT

B : 30ppm

C : 25ppm

*D : 20ppm

Cage Code : 4GUT4

To customize your parameters, contact a Suntsu representative.

* For Frequency stability option D, contact a Suntsu representative.

Electrical Parameters

Units

Minimum

Typical

Maximum

Remarks

Frequency Range

MHz

13.5

156.25

Frequency Stability (Includes Initial

Tolerance at 25°C, Frequency Stability

over Operating Temperature, Output Load

Change, Supply Voltage Change, and First

Year Aging at 25°C.)

ppm

-20

+20

See part numbering guide for options

Operating Temperature

°C

-40

-55

+85

+125

1.890

2.625

3.465

Storage Temperature

Supply Voltage (VDD) - 1.8V Option

Supply Voltage (VDD) - 2.5V Option

Supply Voltage (VDD) - 3.3V Option

Current (IDD) - 1.8V Option

1.710

2.375

3.135

1.8

2.5

3.3

Current (IDD) - 2.5V Option

Current (IDD) - 3.3V Option

Output Load (LVDS)

Ω

100

Output Logic Levels High (VOH)

Output Logic Levels Low (VOL)

Differential Output Voltage (VOD)

Differential Output Error (DVOD)

Offset Voltage (VOS)

1.43

1.1

1.6

0.9

247

330

454

1.125

1.250

1.375

Offset Error (DVOS)

Rise (TR) and Fall (TF) Time

Symmetry (Duty Cycle)

20% - 80% Output Swing Level

No Connection

Tri-State Input Voltage - Enable

Tri-State Input Voltage - Disable

Start-Up Time

0.7*VDD

0.3*VDD

Phase Jitter (12kHz ~ 5MHz)

Phase Jitter (12kHz ~ 20MHz)

0.6

0.4

0.1

1.0

Freq. <40.000M

0.8

Freq. 40.000M - 124.999M

Freq. 125.000M - 156.250M

0.2

Suntsu Electronics, Inc.

142 TECHNOLOGY DR., SUITE 150

IRVINE, CA 92618

www.suntsu.com

Speciﬁcations are subject

to change without notice.

Call: +1-949-783-7300 | Fax: +1-949-783-7301

Ceramic SMD Ultra Low Jitter 6 Pad LVDS Oscillator

SUO22L Series

2.5mm x 2.0mm

Outline Drawing & Land Pattern

All dimensions are in millimeters (mm) unless otherwise noted. Drawings are not to scale.

2.00±0.1

1.10MAX

0.60

0.6

1.20

Test Circuit (LVDS)

Waveform (LVDS)

Tri-State or NC

Typical Phase Noise Performance (Measured By Agilent E5052A)

Frequency - 156.250MHz

Suntsu Electronics, Inc.

142 TECHNOLOGY DR., SUITE 150

IRVINE, CA 92618

www.suntsu.com

Speciﬁcations are subject

to change without notice.

Call: +1-949-783-7300 | Fax: +1-949-783-7301

Ceramic SMD Ultra Low Jitter 6 Pad LVDS Oscillator

SUO22L Series

2.5mm x 2.0mm

Typical Jitter Performance (Measured By Agilent E5052A)

Frequency - 100.000MHz

Reﬂow Proﬁle

Part Marking

Tp (Time At 260°C. 20-40 Sec)

260

Rup (Ramp Up, 3°C/Sec Max)

217

200

TI (Time Above 217°C.

60-150Sec)

150

Rdn (Ramp Down,

6°C/Sec Max)

Ts (Preheat Time.

60-180Sec)

T 25°C to Peak (480Sec Max)

Time (sec)

Tape And Reel Dimensions

All dimensions are in millimeters (mm) unless otherwise noted. Drawings are not to scale.

3,000pcs/Reel

Suntsu Electronics, Inc.

142 TECHNOLOGY DR., SUITE 150

IRVINE, CA 92618

www.suntsu.com

Speciﬁcations are subject

to change without notice.

Call: +1-949-783-7300 | Fax: +1-949-783-7301

Ceramic SMD Ultra Low Jitter 6 Pad LVDS Oscillator

SUO22L Series

2.5mm x 2.0mm

Environmental Speciﬁcations

Mechanical Speciﬁcations

Temperature Cycling

MIL-STD-883, Method 1010, Condition B

Mechanical Shock

MIL-STD-202, Method 213, Condition B

MIL-STD-883, Method 2007, Condition A

MIL-STD-883, Method 1004

Fine Leak Test

MIL-STD-883, Method 1014, Condition A

MIL-STD-883, Method 1014, Condition C

Vibration

Gross Leak Test

Moisture Resistance

Solderability

MIL-STD-883, Method 2003

J-STD-020, MSL 1

Resistance to Solvents

MIL-STD-202, Method 215

Moisture Sensitivity

Resistance to Soldering Heat

MIL-STD-202, Method 210, Condition K

Suntsu Electronics, Inc.

142 TECHNOLOGY DR., SUITE 150

IRVINE, CA 92618

www.suntsu.com

Speciﬁcations are subject

to change without notice.

Call: +1-949-783-7300 | Fax: +1-949-783-7301

相关型号：